Journal of Analytical and Applied Pyrolysis

Papers
(The median citation count of Journal of Analytical and Applied Pyrolysis is 4. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-11-01 to 2024-11-01.)
ArticleCitations
Pyrolysis of plastic waste: Opportunities and challenges395
Biochar as a low-cost adsorbent for aqueous heavy metal removal: A review369
Review on the catalytic effects of alkali and alkaline earth metals (AAEMs) including sodium, potassium, calcium and magnesium on the pyrolysis of lignocellulosic biomass and on the co-pyrolysis of co138
Pyrolysis of plastic species: A review of resources and products136
Aging effects on low- and high-density polyethylene, polypropylene and polystyrene under UV irradiation: An insight into decomposition mechanism by Py-GC/MS for microplastic analysis131
Plastic waste recycling via pyrolysis: A bibliometric survey and literature review104
A critical review on production, modification and utilization of biochar98
Comprehensive review on synthesis and application of activated carbon from agricultural residues for the remediation of venomous pollutants in wastewater96
A review on kinetic study approach for pyrolysis of plastic wastes using thermogravimetric analysis90
The influence of key reactions during hydrothermal carbonization of sewage sludge on aqueous phase properties: A review89
Pyrolysis kinetic behaviour and TG-FTIR-GC–MS analysis of Coronavirus Face Masks78
Co-pyrolysis of lignocellulosic biomass and plastics: A comprehensive study on pyrolysis kinetics and characteristics74
Insight into the KOH/KMnO4 activation mechanism of oxygen-enriched hierarchical porous biochar derived from biomass waste by in-situ pyrolysis for methylene blue enhanced adsorption72
Impact of heating rates on the evolution of function groups of the biochar from lignin pyrolysis70
Review on slagging evaluation methods of biomass fuel combustion67
Elucidating multiple-scale reaction behaviors of phenolic resin pyrolysis via TG-FTIR and ReaxFF molecular dynamics simulations66
Investigation on the formation, structural and photocatalytic properties of mixed Mn-Zn ferrites nanoparticles embedded in SiO2 matrix62
Investigation of biomass and agricultural plastic co-pyrolysis: Effect on biochar yield and properties61
Techno-economic Assessment of Co-gasification of Rice Husk and Plastic Waste as an Off-grid Power Source for Small Scale Rice Milling - an Aspen Plus Model59
Simple hydrothermal synthesis of magnetic MnFe2O4-sludge biochar composites for removal of aqueous Pb2+58
Evaluation of thermoanalytical methods equipped with evolved gas analysis for the detection of microplastic in environmental samples58
Gaseous products from primary reactions of fast plastic pyrolysis56
Green conversion of bamboo chips into high-performance phenol adsorbent and supercapacitor electrodes by simultaneous activation and nitrogen doping55
Pyrolysis temperature effect on compositions of basic nitrogen species in Huadian shale oil using positive-ion ESI FT-ICR MS and GC-NCD55
Activated carbon from lignocellulosic biomass as catalyst: A review of the applications in fast pyrolysis process54
Feedstock and pyrolysis conditions affect suitability of biochar for various sustainable energy and environmental applications53
Recent advancement in coal tar pitch-based carbon fiber precursor development and fiber manufacturing process52
Microwave-assisted pyrolysis of polystyrene for aviation oil production50
What is the best catalyst for biomass pyrolysis?50
Comparison of waste plastics pyrolysis under nitrogen and carbon dioxide atmospheres: A thermogravimetric and kinetic study50
Research status of centrifugal granulation, physical heat recovery and resource utilization of blast furnace slags49
Preparation and test of a reference mixture of eleven polymers with deactivated inorganic diluent for microplastics analysis by pyrolysis-GC–MS48
Catalytic pyrolysis and bio-products upgrading derived from Chlorella vulgaris over its biochar and activated biochar-supported Fe catalysts47
Transformation of nitrogen, sulfur and chlorine during waste tire pyrolysis47
Comprehensive kinetic study of Imperata Cylindrica pyrolysis via Asym2sig deconvolution and combined kinetics46
A review on CFD simulation of biomass pyrolysis in fluidized bed reactors with emphasis on particle-scale models46
A minireview on catalytic fast co-pyrolysis of lignocellulosic biomass for bio-oil upgrading via enhancing monocyclic aromatics45
Assessment of the fertilizer potential of biochars produced from slow pyrolysis of biosolid and animal manures44
Polyethylene terephthalate (PET) waste to carbon materials: Theory, methods and applications44
Microwave pyrolysis of polyethylene terephthalate (PET) plastic bottle sheets for energy recovery44
Advances in supercritical water gasification of lignocellulosic biomass for hydrogen production41
Review on the pyrolysis products and thermal decomposition mechanisms of polyurethanes40
Co-pyrolysis of mixed date pits and olive stones: Identification of bio-oil and the production of activated carbon from bio-char40
In-situ catalytic upgrading of bio-oil derived from fast pyrolysis of sunflower stalk to aromatic hydrocarbons over bifunctional Cu-loaded HZSM-540
Simulation strategies for ReaxFF molecular dynamics in coal pyrolysis applications: A review39
Effects of cotton straw-derived biochar under different pyrolysis conditions on Pb (II) adsorption properties in aqueous solutions39
Bio/KOH ratio effect on activated biochar and their dye based wastewater depollution38
Kinetic analysis of waste tire pyrolysis with metal oxide and zeolitic catalysts38
Production and use of biochar from lignin and lignin-rich residues (such as digestate and olive stones) for wastewater treatment37
Production and characterization of a high value-added seaweed-derived biochar: Optimization of pyrolysis conditions and evaluation for sediment treatment37
An comprehensive review on the spray pyrolysis technique: Historical context, operational factors, classifications, and product applications37
Study on co-hydrothermal treatment combined with pyrolysis of rice straw/sewage sludge: Biochar properties and heavy metals behavior37
Process intensification on co-pyrolysis of polyethylene terephthalate wastes and biomass via microwave energy: Synergetic effect and roles of microwave susceptor37
Mechanism of sulfamic acid modified biochar for highly efficient removal of tetracycline36
Biochar production by coconut shell gasification in supercritical water and evolution of its porous structure36
Co-pyrolysis of agricultural and industrial wastes changes the composition and stability of biochars and can improve their agricultural and environmental benefits36
In situ synthesis and catalytic decomposition mechanism of CuFe2O4/g-C3N4 nanocomposite on AP and RDX36
Co-pyrolysis of cellulose and urea blend: Nitrogen conversion and effects of parameters on nitrogenous compounds distributions in bio-oil36
Effects of pyrolysis temperature on properties of swine manure biochar and its environmental risks of heavy metals35
Organic matter evolution in pyrolysis experiments of oil shale under high pressure: Guidance for in situ conversion of oil shale in the Songliao Basin35
Influence of pyrolysis temperature on the characteristics and lead(II) adsorption capacity of phosphorus-engineered poplar sawdust biochar35
Influence of acid-washed pretreatment on the pyrolysis of corn straw: A study on characteristics, kinetics and bio-oil composition35
The effect of pyrolysis temperature and feedstock on biochar agronomic properties35
Estimation of lignocellulosic biomass pyrolysis product yields using artificial neural networks35
Effect of Ni, Zn and Fe on hydrothermal liquefaction of cellulose: Impact on bio-crude yield and composition35
Microwave fast pyrolysis of waste tires: Effect of microwave power on product composition and quality35
Synergetic effect and primary reaction network of corn cob and cattle manure in single and mixed hydrothermal liquefaction35
Review of thermal decomposition, kinetics parameters and evolved gases during pyrolysis of energetic materials using different techniques34
Catalytic activation preparation of nitrogen-doped hierarchical porous bio-char for efficient adsorption of dichloromethane and toluene34
Preparation of low-nitrogen and high-quality bio-oil from microalgae catalytic pyrolysis with zeolites and activated carbon34
Comparative study on the two-step pyrolysis of different lignocellulosic biomass: Effects of components34
Effects of temperature and carrier gas on physico-chemical properties of biochar derived from biosolids33
Microwave-assisted catalytic pyrolysis of corn cobs with Fe-modified Choerospondias axillaris seed-based biochar catalyst for phenol-rich bio-oil33
Co-pyrolysis re-use of sludge and biomass waste: Development, kinetics, synergistic mechanism and industrialization33
Accelerating the oxidative stabilization of pitch fibers and improving the physical performance of carbon fibers by modifying naphthalene-based mesophase pitch with C9 resin33
Aluminum extraction from activated coal gangue with carbide slag33
Ni-CaO bifunctional catalyst for biomass catalytic pyrolysis to produce hydrogen-rich gas32
Single step preparation of activated biocarbons derived from pomegranate peels and their CO2 adsorption performance32
Qualitative and quantitative analysis of mixtures of microplastics in the presence of calcium carbonate by pyrolysis-GC/MS32
Effects of MgCl2 and Mg(NO3)2 loading on catalytic pyrolysis of sawdust for bio-oil and MgO-impregnated biochar production32
Molecular insight into pyrolysis processes via reactive force field molecular dynamics: A state-of-the-art review32
Recently emerging trends in flame retardancy of phosphorene polymeric nanocomposites and applications32
Assessing pyrolysis behavior of silicon-containing arylacetylene resin via experiments and ReaxFF MD simulations31
Characteristics and adsorption of Cr(VI) of biochar pyrolyzed from landfill leachate sludge31
Assessment of activated carbon fibers from commercial Kevlar® as nanostructured material for gas storage: Effect of activation procedure and adsorption of CO2 and CH431
Physico-chemical characteristics and the adsorption of ammonium of biochar pyrolyzed from distilled spirit lees, tobacco fine and Chinese medicine residues31
Prospects of spray pyrolysis technique for gas sensor applications – A comprehensive review31
Hydrogen-rich gas production through supercritical water gasification of chicken manure over activated carbon/ceria-based nickel catalysts31
A review on analysis of biochar produced from microwave-assisted pyrolysis of agricultural waste biomass31
Model for the physical activation of biochar to activated carbon30
Hydrothermal carbonization of spent mushroom substrate: Physicochemical characterization, combustion behavior, kinetic and thermodynamic study30
Effects of pyrolysis temperature and pressure on agronomic properties of biochar30
Negative-carbon pyrolysis of biomass (NCPB) over CaO originated from carbide slag for on-line upgrading of pyrolysis gas and bio-oil30
Pyrolysis characteristics of metal ion-exchanged Shendong coal and its char gasification performance30
Promoting hydrocarbon production from fatty acid pyrolysis using transition metal or phosphorus modified Al-MCM-41 catalyst30
Analysis of the pyrolysis process, kinetics and products of the base components of waste wind turbine blades (epoxy resin and carbon fiber)30
Catalytic cracking of chlorinated heavy wax from pyrolysis of plastic wastes to low carbon-range fuels: Catalyst effect on properties of liquid products and dechlorination30
Improving benzo(a)pyrene biodegradation in soil with wheat straw-derived biochar amendment: Performance, microbial quantity, CO2 emission, and soil properties29
Effects of process water recirculation on yields and quality of hydrochar from hydrothermal carbonization process of rice husk29
Influence laws of operating parameters on coal pyrolysis characteristics29
High-temperature pyrolysis of isoprenoid hydrocarbon p-menthane using ReaxFF molecular dynamics simulation29
Characterisation of pyrolysis kinetics and detailed gas species formations of engineering polymers via reactive molecular dynamics (ReaxFF)29
A new insight into pyrolysis mechanism of three typical actual biomass: The influence of structural differences on pyrolysis process29
Biomass pyrolysis coupled with non-thermal plasma/catalysis for hydrogen production: Influence of biomass components and catalyst properties29
Co-pyrolysis of biosolids with alum sludge: Effect of temperature and mixing ratio on product properties29
Interactions of lignin and LDPE during catalytic co-pyrolysis: Thermal behavior and kinetics study by TG-FTIR29
Plastic pyrolysis over HZSM-5 zeolite and fluid catalytic cracking catalyst under ultra-fast heating29
Investigating the evolution of pyrolysis technologies through bibliometric analysis of patents and papers29
The comparison study of multiple biochar stability assessment methods29
Secondary reactions in the analysis of microplastics by analytical pyrolysis28
Pyrolysis mechanism and kinetics of high-performance modified lignin-based epoxy resins28
Catalytic fast pyrolysis of coal tar asphaltene over zeolite catalysts to produce high-grade coal tar: An analytical Py-GC/MS study28
Influence of torrefaction and pyrolysis on engineered biochar and its applicability in defluoridation: Insight into adsorption mechanism, batch adsorber design and artificial neural network modelling28
Importance of pyrolysis temperature and pressure in the concentration of polycyclic aromatic hydrocarbons in wood waste-derived biochars28
Effect of boron doping on the performance of Ni/Biochar catalysts for steam reforming of toluene as a tar model compound28
Integrating continuous-stirred microwave pyrolysis with ex-situ catalytic upgrading for linear low-density polyethylene conversion: Effects of parameter conditions28
Comparison of pyrolysis behavior between pure coal and mixture of coal/CaO28
Acetone:Water fractionation of pyrolytic lignin improves its antioxidant and antibacterial activity28
Co-pyrolysis for the valorization of food waste and oriental herbal medicine byproduct28
Pollutants formation, distribution, and reaction mechanism during WT pyrolysis: A review27
Dynamic trends for char/soot formation during secondary reactions of coal pyrolysis by large-scale reactive molecular dynamics27
EPR detection of key radicals during coking process of lignin monomer pyrolysis27
Characteristics, kinetics and product distribution on pyrolysis process for waste wind turbine blades27
Preparation and property of N-doped porous carbon material by one-step pyrolysis of protein-rich algal biomass27
Thermal evolution of gas-liquid-solid products and migration regulation of C/H/O elements during biomass pyrolysis27
Phosphorus doped biochar as a deoxygenation and denitrogenation catalyst for ex-situ upgrading of vapors from microwave-assisted co-pyrolysis of microalgae and waste cooking oil27
Comprehensive thermokinetic modelling and predictions of cellulose decomposition in isothermal, non-isothermal, and stepwise heating modes27
One-step hydrotreatment of inedible oil for production the second-generation biofuel over Pt-Sn/SAPO-11 catalyst26
Prediction of char production from slow pyrolysis of lignocellulosic biomass using multiple nonlinear regression and artificial neural network26
Pyrolysis of torrefied rice straw from gas-pressurized and oxidative torrefaction: Pyrolysis kinetic analysis and the properties of biochars26
Preparation of biomass-based N, P, and S co-doped porous carbon with high mesoporosity based on the synergistic effect of NaOH/thiourea and melamine phosphate and its application in high performance s26
Co-pyrolysis characteristics of camellia oleifera shell and coal in a TGA and a fixed-bed reactor26
Experimental study on the effects of steam temperature on the pore-fracture evolution of oil shale exposed to the convection heating26
Activated coke preparation by physical activation of coal and biomass co-carbonized chars26
Liquid bio-fuels and carbon adsorbents production via pyrolysis of non-edible feedstock26
Understanding pyrolysis mechanisms of corn and cotton stalks via kinetics and thermodynamics26
Fast pyrolysis behaviors of biomass with high contents of ash and nitrogen using TG-FTIR and Py-GC/MS26
Elucidating hydrochar morphology and oxygen functionality change with hydrothermal treatment temperature ranging from subcritical to supercritical conditions26
Fire retardancy in nanocomposites by using nanomaterial additives26
Investigation of slow pyrolysis mechanism and kinetic modeling of Scenedesmus quadricauda biomass25
Selective catalytic conversion of tea waste biomass into phenolic-rich bio-oil and subsequent extraction25
Formation of polycyclic aromatic hydrocarbons and their derivatives in biochars: The effect of feedstock and pyrolysis conditions25
Study of rice husk continuous torrefaction as a pretreatment for fast pyrolysis25
Chemical recycling of plastic waste to monomers: Effect of catalyst contact time, acidity and pore size on olefin recovery in ex-situ catalytic pyrolysis of polyolefin waste25
Optimization based comparative study of machine learning methods for the prediction of bio-oil produced from microalgae via pyrolysis25
Surface analysis of solid products of thermal treatment of lignocellulosic biomass25
Roles of graphitization degree and surface functional groups of N-doped activated biochar for phenol adsorption25
Prediction and modeling of the basic properties of biomass after torrefaction pretreatment25
Comparative study of different algae pyrolysis using photoionization mass spectrometry and gas chromatography/mass spectrometry25
Co-pyrolysis of lentil husk wastes and Chlorella vulgaris: Bio-oil and biochar yields optimization25
FeN@N-doped graphitic biochars derived from hydrothermal-microwave pyrolysis of cellulose biomass for fuel cell catalysts25
A comparative study on thermal behavior of functional groups in coals with different ranks during low temperature pyrolysis25
Primary interactions of biomass components during fast pyrolysis25
Correlations between the compressive strength of the hydrochar pellets and the chemical components: Evolution and densification mechanism24
Activated carbon derived from biomass for wastewater treatment: Synthesis, application and future challenges24
Comparing the effects of different metal oxides on low temperature decomposition of PVC24
Low-temperature hydrothermal carbonization of pectin enabled by high pressure24
Microwave heating performances of low density polyethylene (LDPE) plastic particles24
Preparation and applications of biochar based nanocomposite: A review24
Review on the preparation of high value-added carbon materials from biomass24
Insight to the physiochemical properties and DOM of biochar under different pyrolysis temperature and modification conditions24
Morphology, compositions, thermal behavior and kinetics of pyrolysis of lint-microfibers generated from clothes dryer24
Role of filamentous coke in deactivation of Ni/bio-char catalyst during dry reforming of non-oxygenates tar24
Real-time monitoring the carbonization and activation process of activated carbon prepared from Chinese parasol via zinc chloride activation24
Thermal decomposition of biomass wastes derived from palm oil production24
Steam catalytic cracking of crude oil over novel hierarchical zeolite–containing mesoporous silica–alumina core-shell catalysts24
Chemicals component yield prediction and kinetic parameters determination of oil palm shell pyrolysis through volatile state approach and experimental study24
Promotion of monocyclic aromatics by catalytic fast pyrolysis of biomass with modified HZSM-524
Pyrolysis and heat sink of an endothermic hydrocarbon fuel EHF-85124
Research on the microscopic reaction mechanism of cellulose pyrolysis using the molecular dynamics simulation24
Pyrolysis of sucrose-derived hydrochar23
Thermal hazard and pyrolysis mechanism of tetrazolo[1,5-a]pyridine by TG, DSC, ARC, TG-MS and DFT methods23
The structural and pyrolysis characteristics of vitrinite and inertinite from Shendong coal and the gasification performance of chars23
Effects of process liquid recirculation on material properties of hydrochar and corresponding adsorption of cationic dye23
Preparation of mesocarbon microbeads from coal tar pitch with blending of biomass tar pitch23
Hydrothermal carbonization of oily sludge for solid fuel recovery – investigation of chemical characteristics and combustion behaviour23
Production of platform chemical and bio-fuel from paper mill sludge via hydrothermal liquefaction23
Examination of how variations in lignin properties from Kraft and organosolv extraction influence the physicochemical characteristics of hydrothermal carbon23
Experimental study of the auto-catalytic effect of triethylaluminum and TiCl4 residuals at the onset of non-additive polypropylene degradation and their impact on thermo-oxidative degradation and pyro23
Dynamic migration mechanism of organic oxygen in Fugu coal pyrolysis by large-scale ReaxFF molecular dynamics23
Abstraction of nitrates and phosphates from water by sawdust- and rice husk-derived biochars: Their potential as N- and P-loaded fertilizer for plant productivity in nutrient deficient soil23
Methanol steam reforming in a microchannel reactor coated with spray pyrolysis method for durable Cu/ZnO nanocatalyst23
CFD modeling and experimental validation of biomass fast pyrolysis in a conical spouted bed reactor23
Physicochemical activation and palletisation of Azadirachta indica wood carbons for increased biomethane adsorbed energy storage23
Advances in biosolids pyrolysis: Roles of pre-treatments, catalysts, and co-feeding on products distribution and high-value chemical production23
Microscopic pyrolysis mechanism on the octyphenylsiloxane flame retarded polycarbonate by reactive molecular dynamics23
Study of mesophase pitch based carbon fibers: Structural changes as a function of anisotropic content23
Catalytic thermal decomposition of tetrafluoromethane (CF4): A review23
Syngas production with low tar content from cellulose pyrolysis in molten salt combined with Ni/Al2O3 catalyst23
Hydrogen production from catalytic steam reforming of toluene over trace of Fe and Mn doping Ni/Attapulgite23
Evaluation of poly(styrene-d5) and poly(4-fluorostyrene) as internal standards for microplastics quantification by thermoanalytical methods23
Synergistic effect of washing pretreatment and co-pyrolysis on physicochemical property evolution of biochar derived from bio-oil distillation residue and walnut shell22
Mechanism analysis of hydrogen production by microwave discharge in ethanol liquid22
Screening of inexpensive and efficient catalyst for microwave-assisted pyrolysis of ship oil sludge22
Chemical recycling of end-of-life tires by intermediate pyrolysis using a twin-auger reactor: Validation in a laboratory environment22
Biomass fast pyrolysis in an innovative gas-solid vortex reactor: Experimental proof of concept22
Enhancement of bio-oil quality over self-derived bio-char catalyst via microwave catalytic pyrolysis of peanut shell22
Structural and chemical changes of sludge derived pyrolysis char prepared under different process temperatures22
Chemical recovery of waste electrical and electronic equipment by microwave-assisted pyrolysis: A review22
Co-pyrolysis of sewage sludge and poplar sawdust under controlled low-oxygen conditions: Biochar properties and heavy metals behavior22
Catalytic deoxygenation by H2-free single-step conversion of free fatty acid feedstock over a Co-Ag carbon-based catalyst for green diesel production22
Catalytic upgrading of lignocellulosic biomass pyrolysis vapors: Insights into physicochemical changes in ZSM-522
Investigation of the role of feedstock properties and process conditions on the slow pyrolysis of biomass in a continuous auger reactor22
Autocatalytic influence of different levels of arsine on the thermal stability and pyrolysis of polypropylene22
Study on hydrogen-rich gas production by biomass catalytic pyrolysis assisted with magnetic field21
Study on preparation of aromatic-rich oil by thermal dechlorination and fast pyrolysis of PVC21
Production of light oil-prone biocrude through co-hydrothermal liquefaction of wastewater-grown microalgae and peat21
The effect of fuzzy PID temperature control on thermal behavior analysis and kinetics study of biomass microwave pyrolysis21
Upcycling simulated food wastes into superactivated hydrochar for remarkable hydrogen storage21
Advances in mild degradation and directional upgrading of lignites: From feature identification to value-added utilization21
Effect of torrefaction pretreatment on the fast pyrolysis behavior of biomass: Product distribution and kinetic analysis on spruce-pin-fir sawdust21
Pyrolysis characteristics of tea oil camellia (Camellia oleifera Abel.) shells and their chemically pre-treated residues: Kinetics, mechanisms, product evaluation and joint optimization21
Ammoniated and activated microporous biochar for enhancement of SO2 adsorption21
Co-pyrolysis of polymer waste and carbon-based matter as an alternative for waste management in the developing world21
A step change towards sustainable aviation fuel from sewage sludge21
Study of the degradation of epoxy resins used in spacecraft components by thermogravimetry and fast pyrolysis21
Fast pyrolysis of polyurethanes and polyisocyanurate with and without flame retardant: Compounds of interest for chemical recycling21
Co-pyrolysis of cellulose with urea and chitosan to produce nitrogen-containing compounds and nitrogen-doped biochar: Product distribution characteristics and reaction path analysis21
A comprehensive study on the transformation of chemical structures in the plastic layers during coking of Australian coals20
The influence of lignocellulose on biomass pyrolysis product distribution and economics via steady state process simulation20
Determination of chemical modification of eucalypt kraft lignin after thermal treatment by Py-GC–MS20
Efficient conversion of biomass waste to N/O co-doped hierarchical porous carbon for high performance supercapacitors20
Evaluating fractional pyrolysis for bio-oil speciation into holocellulose and lignin derived compounds20
Study on structures and properties of isotropic pitches and carbon fibers from co-carbonization of aromatic-rich distillate oil and polyethylene glycol20
Catalytic co-pyrolysis of Chlorella vulgaris and urea: Thermal behaviors, product characteristics, and reaction pathways20
N-doped porous carbon nanotubes derived from polypyrrole for supercapacitors with high performance20
Recent progress on corn (Zea mays L.)-based materials as raw, chemically modified, carbonaceous, and composite adsorbents for aquatic pollutants: A review20
Online characterization of pyrolysis products and kinetics study for the pyrolysis of a coal20
Synergism and production of hydrocarbon-rich fuel from mixed-feedstock through co-pyrolysis of LDPE and PP: An assessment of fuel properties, engine performance, and gas emission20
Synergistic effects of biomass building blocks on pyrolysis gas and bio-oil formation20
Influence of particle size and temperature on the yield and composition of products from the pyrolysis of Jimsar (China) oil shale20
Mango peel as source of bioenergy, bio-based chemicals via pyrolysis, thermodynamics and evolved gas analyses20
Selective preparation of 5-hydroxymethylfurfural by catalytic fast pyrolysis of cellulose over zirconium-tin mixed metal oxides20
Adsorption on activated carbons from end-of-life tyre pyrolysis for environmental applications. Part II. Adsorption from aqueous phase20
Pyrolysis behaviors of antibiotic fermentation residue and wastewater sludge from penicillin production: Kinetics, gaseous products distribution, and nitrogen transformation20
Base-acid relay catalytic upgrading of coal pyrolysis volatiles over CaO and HZSM-5 catalysts20
Catalytic co-liquefaction of sugarcane bagasse and polyethylene for bio-oil production under supercritical conditions: Effect of catalysts20
Biochar from raw and spent common ivy: Impact of preprocessing and pyrolysis temperature on biochar properties20
Production of hydrogen and valuable fuels from polyethylene terephthalate waste dissolved in phenol reforming and cracking reactions via Ni-Co/CeO2 nano-catalyst20
Tannic acid as biobased flame retardants: A review20
Promoted production of hydrocarbons in the catalytic pyrolysis of rape straw over composite HZSM-5@MCM-41 catalysts19
Co-pyrolysis of sewage sludge and sodium lignosulfonate: Kinetic study and methylene blue adsorption properties of the biochar19
Pyrolysis kinetic, thermodynamic and product analysis of different leguminous biomasses by Kissinger-Akahira-Sunose and pyrolysis-gas chromatography-mass spectrometry19
Investigation and prediction of co-pyrolysis between oily sludge and high-density polyethylene via in-situ DRIFTS, TGA, and artificial neural network19
Rational introduction of nitridizing agent to hydrothermal carbonization for enhancing CO2 capture performance of tobacco stalk-based porous carbons19
Effect of controlled temperature and biomass addition on the formed environmental persistent free radicals (EPFRs) in sewage sludge-based biochar from pyrolysis treatment19
Recent advances on activated carbon-based materials for nitrate adsorption: A review19
Production of aromatic hydrocarbons from catalytic pyrolysis of Huadian oil shale using ZSM-5 zeolites as catalyst19
Applied machine learning for prediction of waste plastic pyrolysis towards valuable fuel and chemicals production19
Naturally nitrogen-doped porous carbon derived from waste crab shell as anode material for high performance sodium-ion battery19
0.070348024368286