Separation Science and Technology

Papers
(The median citation count of Separation Science and Technology is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-02-01 to 2025-02-01.)
ArticleCitations
Ag-based π-complexation adsorbent for paraffin/olefin separation53
Solvent screening for liquid-liquid extraction of levulinic acid from aqueous medium47
Determination of triazines residues in fruits and vegetables: Methods comparison of ultrasonic solvent extraction with and without solid phase clean-up43
Study on the effect of particle shape on underflow entrainment in hydrocyclone43
Hollow fiber membranes with knitted braid-like structures for process intensification via generation of Dean vortices41
Foreword39
A prospective approach to separate industrial carbon dioxide and flue gases31
Microwave-assisted preparation of carboxylic graphene oxide-chitosan composite for adsorption of uranium and heavy toxic metals in water samples30
Improved swirl-vane designs: Development of low-pressure-drop tubular dynamic hydrocyclones for pre-dehydration28
Durable photocatalytic membrane of PAN/TiO2/CNT for methylene blue removal through a cross-flow membrane reactor25
Ionic liquid promoted extraction of gold(III) from electronic waste: a modeling study22
Green process for recovery of vanadium from hazardous spent contact process catalyst by oxalic acid: kinetics and mechanism21
Ultrafiltration process for lignin-lean black liquor treatment at different acid conditions20
A new Sauter mean diameter correlation suited for the gas cross flow in packed bed reactors based on PSO optimization algorithm19
Comprehensive study of Acid Yellow 42 adsorption by green synthesized polypyrrole/tannicacid/iron nanocomposites18
A new multi-hydroxyl methacrylate based adsorbent for boron removal from aqueous solutions17
Gas permeability and mechanical properties of polyethylene films subjected to ultraviolet irradiation16
A hybrid system for lead removal of simulated battery industry Wastewater using electrocoagulation/electroflotation16
Impact of feed variability on cesium removal with multiple actual waste samples from the Hanford site16
Mechanistic investigation on the microwave-assisted leaching of low-grade coal for low-ash coal production15
Optimization of operational parameters in air-gap membrane distillation using central composite design applied in recovery of dye manufacturing wastewaters15
Reverse osmosis water purification and brine valorization in a Tunisian hemodialysis center15
The migration of imidazolidine between liquid and solid phases during the crystallization of imidacloprid15
Adsorption of Diethylenetriamine from Water by Activated Carbon: Kinetics, Isotherms and Thermodynamics14
Removal of Th(IV) from aqueous solution with modified silica gel by 4-hydroxy-N ′ - ((thiophen-2-yl) methylene)benzohydrazide schiff base14
An insight on reaction kinetics of amino-acid-functionalized ionic liquid monoethanolamine glycinate for CO 2 capture13
Insight into ion exchange column dynamics through application of an analytical model of system performance13
Staged magnetic concentration of complex rare earth ores containing niobium and zirconium13
Preface13
Contamination control in the oil and gas industries using industrial separation technologies: A sustainability and safety-oriented DSS under Pythagorean fuzzy environment12
Synthesis and surface modifications of mesoporous silica adsorbent for selective removal of chromium (Cr 3+ ) ions from wastewater12
Leaching and removal of arsenic with waste acids from arsenic pre-removed dusts discharged from furnaces for pyrometallurgical refining of copper11
Selective recovery of Nickel from electroplating rinse bath wastewater by an integrated Donnan Dialysis/precipitation process11
Adsorption of cationic dyes and antibiotics from aqueous solution by dopamine-modified peanut husk11
Innovative electrocoagulation strategies for landfill leachate treatment: Comparative analysis of aluminum and iron electrodes11
Technological horizons in natural gas processing: A comprehensive review of recent developments11
Fabrication of bio-polymer-based hydrogel for methylene blue remediation: Kinetics, mechanisms, and environmental implications11
Selenium contamination in water; analytical and removal methods: a comprehensive review10
Pilot-scale supercritical CO2 extraction coupled molecular distillation and hydrodistillation for the separation of essential oils from artemisia argyi Lévl. et Vant10
Modeling of an industrial mixing valve and electrostatic coalescer for crude oil dehydration and desalination9
Reducing the adhesion of mica on arsenopyrite surface using sodium phytate and the application in flotation separation9
A comparative study of hydrogen peroxide oxidation and electrocoagulation using aluminum, iron, and zinc electrodes for urban sludge disintegration9
High efficient removal of synthetic cationic and anionic dyes from water by using functional Al-BTB as adsorbent9
Adsorption of cadmium (II) from aqueous solutions by coconut dregs residue: Kinetic and thermodynamic studies9
Liquid-liquid equilibria of ternary mixtures containing Aniline + Toluene + water at elevated temperatures: measurements and correlation8
Optimizing rare earth element beneficiation using response surface methodology and Knelson concentrator8
A review on antibiotics pervasiveness in the environment and their removal from wastewater8
Uranium extraction from nitrate media using amine functionalized poly acrylate hydrogel / nano silica8
Ionic liquids based azeotropic separation of refrigerants R410A (R32+R125) and R508B (R23+R116) through hybrid extractive distillation8
Solvent extraction and kinetic studies of copper from a heap leach liquor using CuPRO MEX-33028
Single walled Carbon nanotube: Chitosan conjugate for sustained ophthalmic delivery of Ciprofloxacin from ointment; its evaluation and in vivo eye irritation study8
Numerical CFD investigation of liquid-liquid two-phase flow separation in a microseparator8
Photolysis and heterogeneous solar photo-Fenton for slaughterhouse wastewater treatment using an electrochemically modified zeolite as catalyst8
Extractive desulfurization of thiophene by tetraethylene glycol at T = 298.15 to 313.15 K and liquid–liquid phase equilibrium study8
Utilization of the mixture of ethylene tar and different petrochemical by-products as collectors for coal flotation8
Investigation of tris(2-methylbutyl) phosphate for U/Th separation from U-Th and U-Th-REE solutions by cross current mode8
Experimental study on CO 2 absorption in aqueous solutions and water–oil emulsions of TEA and blended MEA/DEA–TEA8
Molecularly imprinted composite discs for transferrin recognition8
Preparation and characterization of experimental oily wastewater: effect of rotor speeds and oil/water ratios in an in-line high-share mixer8
Influence of interfacial, thermodynamic and hydrophobic parameters on Acid Red 57 removal by ionic micellar flocculation8
Particle image velocimetry for investigating the effect of liquid rheology on flow field of liquid–solid hydrocyclone8
Economic evaluation of pressurized liquid extraction system scale-up: a potential new business opportunity for yerba mate ( Ilex paraguariensis St.-Hil.) waste reuse8
Ixora coccinea (jungle geranium): A dual-functioning agent for crystal violet removal from wastewater and dye production7
Recovery of rhenium and tungsten from calcium tungstate containing rhenium via hydrochloric acid decomposition7
Optimization of the separation chamber structure of a pneumatic dry low-intensity drum magnetic separator based on a multi-physical field coupling model7
Plumeria alba (white frangipani) leaf powder as a biomass-based adsorbent for removal of methylene blue in water7
A sustainable development approach of silica recovery and treatment of semiconductor-industry wastewater using ceramic membranes7
Sorption of indium(III) and gallium(III) by iron(II) hexacyanoferrate7
Anthocyanins of Ardisia spp. fruits separated with pH driven-aqueous biphasic systems7
A simulation on field distribution and particle capture characteristics in a multi-wire PHGMS system7
Development of a magnetic solid phase extraction method for gemcitabine from rat plasma by using magnetic graphene oxide calix[6]arene composite and its application to pharmacokinetics7
Unique Eu(III) transport selectivity seen using a supported liquid membrane containing a diglycolamide dendrimer ligand7
A novel carbon-based material recycled from end-of-life tires (ELTs) for separation of organic dyes to understand kinetic and isotherm behavior7
Propionic acid recovery from dilute aqueous solution by emulsion liquid membrane (ELM) technique: optimization using response surface methodology (RSM) and artificial neural network (ANN) experimental7
Adsorption behavior of Cr(VI) and As(III) on multiwall carbon nanotubes modified by iron–manganese binary oxide (FeMnOx/MWCNTs) from aqueous solution7
Integration of coagulation-flocculation process for improved solid–liquid separation of anaerobically treated textile effluent7
In-situ microscopy investigation of floc development during coagulation-flocculation with chemical and natural coagulants7
Treatment of water contaminated with petroleum hydrocarbons using a biochar derived from seagrass biomass as low-cost adsorbent: isotherm, kinetics and reusability studies7
Direct dissolution of metal oxides in ionic liquids as a smart strategy for separations: Current status and prospective7
Studies on the potential recovery of copper from low-grade mixed sulfide-oxide ore and optimization of the process parameters7
Oil/water separation through dual-channeled superhydrophobic/underwater superoleophobic meshes toward continuous processes7
Application of templating-free chromium therephtalate for the adsorption of nitrogen-containing compounds in oil refinining feedstocks. Kinetics and thermodinamycs6
Hydrofluorocarbon Diluent for CMPO Without Third Phase Formation: Extraction of Uranium(VI) and Lanthanide(III) Ions6
Removal of antibiotics from pharmaceutical wastewater using Lemna Aoukikusa (duckweed)6
Environmentally friendly alternative depressants in chalcopyrite flotation6
Comments concerning papers about cationic dyes sorption, published by Saeed et al. (2023), Tan et al. (2023) and Yıldız et al. (2023)6
Optimizing heat transfer with nanoparticles and thermal dynamics of bio fluid in electroosmosis-driven peristaltic flow through a porous channel6
A hybrid of RSM, ANFIS, and machine learning algorithm approach for ultrasound-assisted extraction of bioactive compounds from Semecarpus anacardium Linn6
The Sips isotherm equation: Often used and sometimes misused6
Adsorption kinetics and equilibrium performance of Di-n-butyl phosphate on XAD-4 and XAD-7 from alkaline medium6
How polyvinyl alcohol-based interlayers affect the performance of polyamide nanofiltration membranes prepared by polyethyleneimine6
Adsorption of heavy metal ions by carbon-based adsorbent using magnetic nitrogen-doped carbon and graphene oxide6
Removal of arsenic (V) from water using arsenic-imprinted nanoparticles6
Comparison of extraction methods of virgin coconut oil: cold press, soxhlet and supercritical fluid extraction6
Synthesis and characterization of allyl mannitol cross-linker based novel hydrogel for capturing of toxic metal ions from aqueous solution6
Improving microfiltration efficiency of fruit beverages through backpulsing: Impact on permeate flux, cost-effectiveness and bioactive compounds retention6
HPLC separation of REE, U and Pu from uranium silicide fuel6
A new insight into the inhibition mechanism of calcium ion on low-rank coal flotation6
Removal of zinc, lead and nickel from contaminated soil by electro-kinetic technology under the influence of washing and buoyance forces with different purging solutions6
Application of the Dubinin–Radushkevich–Astakhov equation to calculate gases isotherms on zeolite adsorbents (on example of H2, CO2, CO, CH4, N2 adsorption on 13X and 5A)6
Electroplating wastewater treatment containing heavy metals and COD using batch and once through continuous electro-oxidation process6
Application of robust syringe-to-syringe dispersive liquid-phase microextraction method for preconcentration and determination of mercury with the aid of an experimental design6
Separation of rare earth elements from waste NdFeB magnets: The influence of hematite seeds and agents on the hematite precipitation in nitric acid medium6
Lead removal from natural zeolite through optimized HCl leaching using response surface methodology6
Effective flotation separation of brucite and serpentine using eco-friendly PCE-11 as a novel regulator5
Experimental research and numerical analysis for effect of drainage structure on separation performance and the “blockage” of fluid in nozzle5
Selective extraction of heavy metals from sewage sludge via combined process of acid leaching and ion exchange resins adsorption: Optimization and performance evaluation5
Phosphate abatement using calcium silicate hydrate synthesized from alum factory solid waste residue5
The relationship between spodumene surface pretreatment and flotation behavior: A review5
Parametric optimization of Sm(III) extraction from nitrate media by employing hollow fiber membrane using Taguchi analysis5
Sorption of ruthenium on aniline-siloxane composites5
Understanding the sorption behavior of tri, tetra and hexavalent f cations on metal–organic framework (MOF), ZIF-67: experimental and theoretical investigation5
Evaluation of numerical approaches for the simulation of water-flow in gravity-driven helical mineral separators5
The hematite ore liberation and separation properties in different comminution way5
Adsorptive Removal of Methylene Blue from Aqueous Solutions Using Magnetic Fe3O4@C-dots: Removal and kinetic studies5
Collaborative separation of nickel and iron from nickel laterite ore and red mud5
Research progress on flocculation-based technology for the enhancement of sludge dewatering: A review5
A molecular dynamics study for the extraction of cesium from aqueous solutions in the presence of functionalized carbon nanotube5
Analysis of the adaptability of marine hydrate in-situ separator for sand removal to production volume5
Recovery of valuable metals from SmCo magnets through sulfation, selective oxidation, and water leaching5
Electrocoagulation as an efficacious technology for the treatment of wastewater containing active pharmaceutical compounds: a review5
Atomic insight into the activation mechanism of feldspar by sodium oleate in flotation separation of quartz and feldspar: XPS, AFM, and molecular dynamics5
Optimization of isotopic binary and multi-component separation cascades using a novel nature-inspired horse herd algorithm5
Performance-based simulants for Hanford radioactive waste treatment process testing5
Adsorption of NMST from acetic acid on coconut activated carbon: Kinetics, isotherms and thermodynamics5
Eco-friendly CO2 adsorption by activated-nano-clay montmorillonite promoted with deep eutectic solvent5
Adsorption of uranium by amination mesoporous molecular sieve HMS, using response surface methodology5
Oxidation of ferrous ions enhanced by CaMg(CO 3 ) 2 for their efficient separation from neodymium solution5
Green nanomaterial-based adsorbent for Cs and Pb removal: Synthesis from industrial waste producing high-value products4
Droplet behaviors of W/O emulsions under the combination of electric field and medium coalescence4
A comparative study between the adsorption mechanisms of sodium co-silicate and conventional depressants for the reverse anionic hematite flotation4
A three-product magnetic-separation column: influence of compound force field on the settlement of magnetite4
Lemongrass (Cymbopogon nardus) leaves biowaste as an effective and low-cost adsorbent for methylene blue dyes removal: isotherms, kinetics, and thermodynamics studies4
Optimization of vibratory nanofiltration for sustainable coffee extract concentration via response surface methodology4
Simplified solvent extraction process for high-purity Ni/Co mixed solution for lithium–ion batteries4
Removal of Reactive Blue 19 from simulated textile wastewater by Powdered Activated Carbon/Maghemite composite4
An experimental study probing moisture kinetics and indices of microwave dried fecal sludge with an insight on real world applications4
Visual detection and highly sensitive quantification of antibiotic meropenem in pharmaceutical and human plasma samples using gold nanoparticles4
Novel multi-hydroxyl containing organo-vermiculite for effective removal of 2-Naphthol: adsorption studies and model calculations4
Recovery of energy values from high-ash content washery tailings using waste oils by oil agglomeration4
Calcium phosphates synthesized from coralline materials (Porites) and their application as a demulsifier for water–oil separation4
Deep eutectic solvents for water vapor absorption: A new strategy4
Synthesis of Ga3+ doped lithium manganese ion sieve for Li+ extraction and its adsorption thermodynamic behavior4
An evaluation on the prospective application of lignocellulose based biosorbents for the separation of Cr(VI) from aqueous solution: A critical review4
Solvent extraction of acetic acid from aqueous solutions: A review4
Improvement of the chlorine resistance of graphene oxide membranes through siloxane cross-linking4
The synthesis of gmelinite microspheres and their post-synthetic modification for improved defluoridation4
EFFECTIVE SIMULTANEOUS SEPARATION OF COPPER (II) AND MOLYBDENUM (VI) FROM RHENIUM (VII) BY ADSORPTION ON X- ALUMINA4
Effects of structure and chemistry on electrochemical transport properties of anion exchange membranes for separation of CO24
Poly(ε-caprolactone) electrospun nanofibers decorated with copper hexacyanoferrate as an ion exchanger for effective cesium ion removal4
Sequestration of Mecoprop herbicide from water using XAD-4 resin impregnated with Aliquat 336 and quantification with Liquid Chromatography-Tandem mass spectrometer (LC-MS/MS)4
Supercritical fluid extraction of quercetin from sumac (Rhus coriaria L.): effects of supercritical extraction parameters4
Evaluation of casein protein transport through surface functionized membranes using irreversible thermodynamics and concentration polarisation model4
Separation and preparation of level I standard lead concentrate from lead ore via S-HGMS technology: description of separation mechanism4
The role of Tween 80 and SDS in the kinetics of semi-clathrate hydrates formation for carbon dioxide capture from flue gas4
Carbon dioxide delivery and resulting biomass separation in microalgae cultivation using triethanolamine4
Recovery of secondary resource rare earth bearing Indian beach placer garnet and value addition4
Assessment of EDTA-enhanced electrokinetic removal of metal(loid)s from phosphate mine tailings4
Carbon dioxide absorption in packed bed of lithium orthosilicate pebbles4
Selective extraction of molybdenum (VI) with novel ionic liquid from nitric acid solution4
Studies on the aggregation behavior of mineral acid and Zr(IV) loaded Tris(2-methylbutyl) phosphate and tri-n-alkyl phosphate systems using small angle neutron scattering4
Experimental design of hydrotropic extraction for recovery of bioactive limonin from lemon (Citrus limon L.) seeds4
The synthesis and use of new amic acid extractants for the selective extraction of Cu(II),Ni(II) and Co(II) from other base metal ions in acidic medium4
Adsorption and separation behavior of Pd(II) from simulated high-level liquid waste using N,N,N’,N’-tetra-2-ethylhexyl-thiodiglycolamide silica-based adsorbent4
Exploring the effect of aeration intensity on a modified PVDF-PEG membrane incorporated with nano-MgO: antifouling and AnT-POME treatment4
Decolorization of xylose mother liquor with polydivinylbenzene/aminated polyglycidyl methacrylate interpenetrating polymer networks4
Sustainable coal flotation: Biodiesel from vegetable oil refinery waste as an alternative collector to diesel and acid oil4
A simple method for developing efficient room temperature reduced graphene oxide-coated polyurethane sponge and cotton for oil-water separation4
CO2& CH4Capture and Separation Using Ti Doped Vanadium Oxide Nanotube: Molecular Simulation Study4
Impact of dilution-induced precipitates on the filtration of Hanford liquid tank wastes4
Gold leaching performance of amino acids under alkaline conditions4
Effective and sustainable removal of Pb 2+ ions from wastewater by a new synthetic bis-thiosemicarbazone derivative immobilized in amberlite XAD-2: Kinetic, isotherm4
Purification of U from U-10Mo scrap generated during the fabrication of high performance research reactor fuel3
Bio-adsorption performances of methylene blue (MB) dye on terrestrial and marine natural fibers: Effect of physicochemical properties, kinetic models and thermodynamic parameters3
Selective removal and simultaneous immobilization of Pb cations from solutions3
Adsorptive removal of carcinogenic azo dye from aqueous solution using NaCPT@HDTMA3
Removal of diclofenac sodium from aqueous solution using ionic micellar flocculation-assisted adsorption3
Experimental performance analysis of vacuum pressure swing adsorption air separation process under plateau special conditions3
Adsorption of Cr (VI) ion from aqueous solution on acrylamide – grafted starch (Coccinia abyssinicca) – PVA/PVP/chitosan/graphene oxide blended hydrogel: isotherms, kinetics, and thermodynamics studie3
Evolution of extraction technique for the separation of bioactive compounds from Aegle marmelos3
The chlorination and separation of aluminum using low-temperature sulfur chloride reagents3
Transport selectivities in ion-exchange membranes: Heterogeneity effect and analytical method dependence3
An improved control strategy for an industrial copper solvent extraction process3
Investigation on the lead adsorption capacity of Iranian natural zeolite: modifications, structural effects, adsorption isotherms, kinetics, and mechanism studies3
Hexavalent chromium scavenging performances of one-pot synthesized hydrous cerium-copper-mixed oxide from contaminated water with plausible mechanism3
Thermodynamics, kinetics and isotherm studies on the removal of anionic Azo-dye (Congo red) using synthesized Chitosan/Moringa oleifera gum hydrogel composites3
Adsorptive Removal of Cationic Rhodamine B Dye from Aqueous Solutions Using Chitosan-Derived Schiff Base3
Synthesis of r-GO/PANI/ZnO based material and its application in the treatment of wastewater containing Cd2+ and Cr6+ ions3
Application of a novel surface-active green demulsifier for demulsification of field crude oil emulsion3
Physiochemical aspects for the adsorption behavior of sodium carboxymethyl cellulose onto mesoporous granular fine quartz surface from its aqueous solutions3
Adsorption-absorption technique for effective CO 2 capture3
Optimization of parameters in using two different approaches for palladium-based spent catalysts (ethylene synthesis process) regeneration: supercritical carbon dioxide based extraction process and th3
Egg white protein polymer: an affinity matrix for protease enrichment and isolation3
Evaluating CO2 capture performance by adsorption using synthesized and commercial activated carbon3
A novel approach for pre-concentrating titanium from Ti-bearing blast furnace slag3
Synthesis and characterization of positive volume phase transition hydrogel membrane prepared using a cellulose substrate3
Aminated cellulose-GO-Doped manganese ferrite Nanosorbent with Enhanced adsorption properties of Diclofenac: Isotherm, kinetic, and Thermodynamic Study3
Interaction of induced magnetic field, double diffusion convection and multiple slips for thermal radiative biological flow of six-constant Jeffreys nanofluid: Advancements in mechanics3
Unraveling complexation and separation of novel asymmetric uranyl-5-methoxy-2-(4-methoxy-6’-(quinazolin-2-yl)-[2,2’-bipyridin]-6-yl) quinazoline to chiral fungicides R/S-metalaxyls and R/S-benalaxyls3
Aerated iron electrocoagulation process as an emerging treatment method for natural water and wastewater3
Preparation and characterization of agarose-encapsulated ceramic hydroxyapatite particles for flow-through chromatography3
Enhancing lepidolite flotation efficiency with the novel LCJ collector: comparative analysis and mechanistic insights in Jiangxi Province’s lepidolite resources3
Investigating the effects of sacrificial agents on MO dye degradation with Ag 2 Se nanocomposites via chemical wet method using visible light irradiation3
Concentration of oxidized Brazilian zinc ore by flotation: comparative study between anionic and cationic routes3
Enhancing oil removal from wastewater by combining inclined plate settler and electrocoagulation3
Hydrodynamic and mass transfer parameters for CO2 absorption into amine solutions and its blend with nano heavy metal oxides using a bubble column3
Flotation assessment and adsorption mechanism of wulfenite with three anionic collectors3
Renewable Eco-Friendly Activated Biochar from Tobacco: Kinetic, Equilibrium and Thermodynamics Studies for Chlorpyrifos Removal3
Facile preparation of reduced graphene oxide for removing tetracycline from water: Kinetics and thermodynamics studies3
Selective modulation of surface properties of magnesite and calcite by a novel calciphilic depressant EGTA3
p -Morpholinomethylcalix[4]arene incorporated polyacrylonitrile nanofibers as selective adsorbent for removal of Cu +2 from aqueous environment3
Optimization of ultrasound-assisted extraction of galactomannan from carob seeds “ ceratonia siliqua L” and evaluation of their functional properties and 3
Mechanical characteristics of magnetite as a function of particle size during column-based magnetic separation3
Development of a three-stage, cross-current air sparged mixer-settler for the purification of degraded PUREX solvent3
Development of the electrocoagulation and electrodialysis technologies for the quantitative recovery of lanolin3
Synthesis of zeolite type A from metakaolin obtained by thermal treatment of kaolin: Textural and BB41 dye adsorption experimental design studies3
Efficiency of magnetic immobilization for recombinant Pichia pastoris cells harvesting over consecutive production cycles3
Enhancing the flotation performance of ilmenite with the magnetic treatment of water3
Performance of crosslinked bentonite-biocarbon electrodes for chromium mitigation through electrosorption3
Modified biofloc technology and its effects on water quality and growth of catfish3
Studies on application of Petcoke-based graphene membranes for CO 2 separation3
Electrowashing of microalgae Arthrospira platensis filter cake3
The effects of TiO2 nanoparticles and polydopamine on the structure, separation, and antifouling properties of PPSU membrane3
Eco-friendly novel adsorbents composed of hybrid compounds for efficient adsorption of methylene blue and Congo red dyes: Kinetic and thermodynamic studies3
Adsorption of methylene blue from aqueous solution on biochar prepared from a K-rich biomass Alternanthera philoxeroides3
Extraction and separation of chromium from the solution after hydrolysis precipitation of vanadium3
Optimization of Triterpenoid Extracted from Vietnamese Ganoderma lucidum via Supercritical Extraction Method and Biological Tests3
Efficient ultrasonic assisted adsorption of organic pollutants employing bimetallic-carbon nanocomposites3
Synthesis and characterization of amide-Functionalized analogues of glycine-betaine based ionic liquids and an exemplified use for the separation of copper(II) and cobalt(II)3
Water quality improvement using novel attached growth systems3
Modeling and optimization of adsorption behavior of lactic acid onto zirconium-based metal-organic framework: response surface methodology (RSM)3
Performance assessment and economic aspects for water reclamation from UASB reactor effluent: Influence of coagulant type and membrane pore size3
Review of foam fractionation as a water treatment technology3
Efficient removal of non-steroidal anti-inflammatory ibuprofen by polypyrrole-functionalized magnetic zeolite from aqueous solution: kinetic, equilibrium, and thermodynamic studies3
Two new ammonium-based poly(ionic liquid)s for breaking water-in-crude oil emulsions2
Low temperature hydrothermal processing to recover aluminum from nepheline syenite roast-leach residue2
Production of innovative magnetic adsorbent Fe3O4@PEI®Tween 85 and removal of oxytetracycline from aqueous media2
Response surface statistical modeling for optimization of methylene blue adsorption from aqueous solution using chitosan/graphite composites: Isotherm and kinetics studies2
Continuous removal of Pb (II) and Cu (II) ions from synthetic aqueous solutions in a fixed-bed packed column with surfactant-modified activated carbon2
Graphene oxide-based sorbents modified with waste orange peel biochar for Cd(II) removal from aqueous waste streams2
Development of a deep learning-based object recognition system for pre-stage separation to improve the recycling rate of major general-purpose plastics2
Treating hydraulic fracturing produced water by electrocoagulation2
Purification of bioactive polysaccharides from Lentinula edodes using fixed-bed column with activated carbon2
A novel approach using a stacked layer filtration process to desalination from cotton fabric and conductive graphene sheets2
Numerical simulation on gas-solid separation characteristics of in-situ pyrolysis products of tar-rich coal2
Y-Y microfluidic polymer/salt aqueous two-phase system for optimization of dye extraction: Evaluation of channel geometry2
Integration of hydroxyapatite from fish scales and polyethersulfone membrane for protease separation fromBacillus subtilis2
A novel cloud point back-extraction of uranium(VI) from organic radioactive solution to slightly acidic aqueous medium2
Modeling of deionization of aqueous compounds using electrodialysis process (data collection for enhanced clarity)2
Geopolymer-zeolite and geopolymer- iron (III) ion exchanged zeolite pellets as highly regenerable CO 2 adsorbents2
0.142737865448