Journal of Thermal Stresses

Papers
(The median citation count of Journal of Thermal Stresses is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-08-01 to 2026-08-01.)
ArticleCitations
Thickness-stretched model for thermal vibrational behaviors of graphene origami reinforced doubly curved33
Thermal buckling and postbuckling of columns accounting for temperature effect on material properties29
Exploring the Flash Heating method in additive manufacturing for residual stress prediction: A comparative study with diffraction results from X-ray and neutron techniques22
Dynamic response of structural beams undergoing moving loads and thermal strains using finite elements – Part 122
3D analytical solution to a thermo-chemo-elastic contact problem with multi-species diffusion22
Solution of the problems of thermoelasticity for a circle with double porosity22
Analytical study of primary drying with microorganisms and time-dependent boundary condition21
Mathematical significance of strain rate and temperature rate on heat conduction in thermoelastic material due to line heat source21
Axisymmetric half-space problem in thermoelastic diffusion under phase lags and hyperbolic two temperature20
Non-simple thermoelastic diffusion interaction in a half-space with nonlocality and memory effect20
Higher-order shear deformation modeling of thermoelastic dissipation in nanobeams including nonlocal elasticity and Moore-Gibson-Thompson heat equation18
Analytical study of the thermal inclusion problem in a half-plane17
Thermal stresses in an elastic parallelepiped17
Numerical analysis of thermal enhancement induced by partially ions suspended in co-axially swirled disks17
An imperfectly bonded elliptical inhomogeneity under uniform heat flux and uniform temperature change15
Elasticity solutions of clamped laminated arches with temperature-dependent material properties under thermo-mechanical loading15
Analytic solutions for static bending and free vibration analysis of FG nanobeams in thermal environment15
Dynamical interactions of the magnetic field in a binary mixture of interacting thermoelastic solids14
Effect of nonlocality and Goufo-Caputo kernel in heat transfer nonsimple model within an infinite-length hollow cylinder subjected to diverse sectional heat supply14
Thermoelastic microbeams subjected to axial force and laser pulse energy absorption embedded in a viscoelastic foundation with fractional Kelvin-Voigt model14
Thermal conductivity and interfacial thermal conductivity of complex boron nitride nanoribbons13
The temperature gradient and humidity diffusivity in a rotating semiconductor porous thermoelastic medium with microtemperatures13
Thermohyperelastic constitutive response for semilinear materials with application to deformation of a rotating thin disk13
Thermostatics of micropolar elastic thin beams with a circular axis with independent fields of displacements and rotations and the finite element method13
Thermal stress intensity factors in composite plates with cracks arising from a circular hole12
Boundary element analysis of thermal stresses on voids/holes in an infinite/semi-infinite anisotropic plane12
Nonlocal magnetothermoelastic sphere or space with a spherical cavity with an exponential or sinc-fractional operator12
Nonlinear thermal-induced oscillations of porous axisymmetric FGM cylindrical shells resting on elastic foundation exposed to cooling shock12
Numerical study of thermo-mechanical response of tumor in laser thermotherapy based on fractal theory11
Response of double porous deformation on an initially stressed thermoelastic medium11
Thermomechanical instability of viscoelastic friction materials in automotive disk clutches and brake pads11
Dynamic bending analysis of the piezoelectric semiconductor nanoplate with thermoelectric effect11
Numerical study of the thermal behavior of a cylindrical fin formed by two orthotropic media11
Thermo-electro-elastic analysis of piezoelectric hollow cylinder with thermopolarization effect10
Modeling the thermal dynamic behavior of a perforated Timoshenko nanobeam with deformable ends based on nonlocal elasticity10
Potential method in the coupled theory of Moore-Gibson-Thompson thermoporoelasticity10
A Pell-Lucas approximation for solving temperature distribution and oscillator models10
On a thermoelastic Timoshenko system without the second spectrum: Existence and stability10
Substrate design-based control of the residual distortion in directed energy deposition additive manufacturing10
Recrystallization and stress evolution in Alloy 7189
Thermal analysis model correction method based on Latin hypercube sampling and coordinate rotation method9
Nonlinear thermal stresses analysis and post-buckling of rectangular composite laminates using high-order plate finite elements9
Wave scattering of plane wave at the loosely bonded interface of two dissimilar rotating triclinic magneto-thermoelastic media under nonlinear thermoelasticity and DPL model9
Snap-buckling and resonance of functionally graded graphene reinforced composites curved beams resting on elastic foundations in thermal environment9
Thermoelastic damping analysis in nanobeam resonators considering thermal relaxation and surface effect based on the nonlocal strain gradient theory9
Thermoelastic analysis of ellipsoidal particle-reinforced functionally graded materials, considering the boundary effects9
State space approach to study thermal shock problem in nonlocal thermoelastic medium with double porosity9
Spatio-temporal variability on the interface thermal resistance of clay-sand composite strata9
A comprehensive examination of fundamental solution and Green’s function in orthotropic photothermoelastic media including moisture9
Dynamic thermomechanical analysis on stiffened composite plates with damage9
Thermoelastic damping in rectangular micro/nanoplate resonators by considering three-dimensional heat conduction and modified couple stress theory9
Some characteristic properties of the solutions in the three-phase-lag heat conduction9
Decay with respect to boundary conditions in nonsimple thermoelasticity with microtemperatures*9
An analytical solution for multiple inclusions subject to a general applied thermal field9
Thermoelastic response of multilayer cylinders: The direct integration and single-solid approach8
Temperature-dependent vibrational behavior of bilayer doubly curved micro-nano liposome shell: Simulation of drug delivery mechanism8
Effect of thermal mismatch strain on the self-assembly of nanorods in YBCO/NRs nanocomposite films8
Editor’s preface8
Analysis of cracked layers under thermal and mechanical shocks7
A new modified deep learning technique based on physics-informed neural networks (PINNs) for the shock-induced coupled thermoelasticity analysis in a porous material7
Phonon-boundary scattering and second-order boundary conditions: Application to the heat transfer in one-dimensional nanosystems7
An anisotropic elastic parabolic inhomogeneity under uniform heat flux7
Nonlinear thermal vibrations and post-buckling of double-layer graphene system based on modified couple stress theory7
An efficient meshfree framework for simulation of crack tip stress fields in two-dimensional graded media subjected to thermoelastic loads7
Well-posedness and general energy decay for a nonlinear piezoelectric beams system with magnetic and thermal effects in the presence of distributed delay7
Analytical solution of the temperature-dependent thermoelastic problem induced by Joule heating and the presence of an elliptic cavity7
A numerical study of solid–vapor phase conversion process with size-dependent thermal conductivity and variable boundary condition7
Interval finite element analysis of thermal protection system under thermomechanical coupling7
Coupled magneto-electro-thermal buckling and vibration analysis of TPMS-based auxetic core sandwich nanoplates within the framework of HSDT and NSGT7
An attention-based architecture for predicting thermal stress on turbine blade film hole surface using partial temperature data7
Klein–Gordon (KG)–MGT thermoelasticity in Pasternak nanobeams7
On the role of thermal stress in fracture toughness of polymer nanocomposites: A multiscale theoretical model7
Modeling blood flow with tetra-hybrid Casson nanofluid in stenosed arteries: Numerical and machine learning approach7
Axial vibration and strength failure analyses of a beam made of thermoelectric materials subjected to time-varying thermal loads7
Multi-objective topology optimization for thermo-elastic systems based on periodic constraints7
Thermoelectric Joule heating in crack problems in nano-sized structures6
Study of non-local thermoelasticity of a rectangular plate6
Analytical technique for hygrothermo-electroelastic field in piezoelectric bodies with D symmetry6
Thermoelastic diffusion system of type II with nonlocal delay6
Effects of transverse normal strain on the bending response of functionally graded shells under the action of hygrothermomechanical loading6
Dynamic response of structural plates undergoing moving loads and thermal strains using Finite Elements – Part 26
Propagation of thermoelastic waves for a rotating semiconductor material subjected to laser beam and initial stress effect6
Continuous dependence and convergence with respect to the characteristic coefficients for a fourth-order heat equation6
Two-dimensional problem for an infinite body of two coaxial cylinders under the action of a solenoidal body force in the theory of thermoelastic diffusion6
Structural degradation and fracture behavior of granite after microwave irradiation: Assisted hard rock breaking6
Generalized piezothermoelasticity of hollow spheres under thermal shock using Lord–Shulman theory6
Analysis of the magnetic-thermal response of viscoelastic rotating nanobeams based on nonlocal theory and memory effect6
A Mori-Tanaka method based theoretical approximation for functionally graded thick wall tube under combined thermal and mechanical loads6
A new approach to problems of thermoelasticity in stresses6
Axisymmetric interfacial analysis of a functionally graded one-dimensional hexagonal piezoelectric quasicrystal film attached to an elastic substrate via an adhesive layer6
Nonlinear analysis of pin-ended deep arches under instantaneous heating5
Role of interface tension in the thermoelastic analysis of inclusions: Unified formulation and closed-form results5
Thermomechanical behavior of auxetic lattices5
Vibrations of columns in the thermal postbuckling state accounting for temperature effect on material properties5
Foreword5
Stability results for a thermoelastic laminated beam with micro-temperature effects5
Thermo-hydro-mechanical responses of a lining-soil system considering interfacial conditions5
Domain of influence on generalized thermoelastic diffusion theory5
Effect of scale length parameter on plane wave propagation under size-dependent thermoelasticity with one relaxation time5
Thermoacoustic performance of 100 kHz wide-band packaged projector in water tank with three-dimensional graphene5
Thermoelastic diffusion interaction of fractal medium with non-integer dimensional space via nonlocality and memory effect5
Thermoelastic damping in micro-disk resonators with in-plane extensile vibration5
Thermo-viscoelastic analysis of biological tissue subjected to moving heat source under fractional order strain5
Integrated modeling of microstructure-property-distortion relationship in friction stir additive manufacturing5
Stability of thin cylindrical shells under coupled thermoelastic assumption5
Implementation of viscoplastic models on CalculiX code for thermomechanical analysis of liquid rocket engine thrust chambers4
Design of a focusing system for micro-nano satellite remote sensing camera based on thermal control technology4
Thermostressed analysis of multilayer elastic spherical vessels using the homogenized and multilayer models4
Thermal stresses in bimetallic plate under induction heating by nonstationary electromagnetic field4
Correction4
Aluminothermic welding modeling of heavy haul rails using the element birth and death technique4
Nonlocal theory of propagation and reflection of plane waves in higher order thermo diffusive semiconducting medium4
Partially insulated cracks in orthotropic materials under steady state thermo-mechanical loadings4
Analysis of the thermal lubrication characteristics of cycloid pinwheel transmission mechanisms in RV reducers4
Impact of fractional strain on medium containing spherical cavity in the framework of generalized thermoviscoelastic diffusion4
Frictionless discontinuous contact problem of the thermoelectric layer resting on a rigid base4
Thermomechanical analysis of FGM sandwich beams through graded FEM4
Fluid thermal coupling analysis of double-layer cooled coaxial powder feeder laser sinter4
Analysis of thermal effects during laser ablation of the Al/PTFE reactive material4
Elasticity solution of functionally graded viscoelastic sandwich plates with piezoelectric layers under electrothermomechanical loading using DQM4
Hybrid Trefftz finite element method for heat conduction in cylindrical composite laminates4
Thomson influence in an electro-magneto-thermoelastic medium via the Moore–Gibson–Thompson model with memory and nonlocality effects4
Study on non-centrosymmetric cracking of gas-containing rock induced by Gaussian distributed heat flux4
Consistent time-level evaluation of coupled terms using the GS4 i -integration framework for transient multi-physics problems4
Non-axisymmetric hygrothermo-electroelastic field in piezoelectric bodies with D symmetry3
A variational inequality approach for the numerical simulation of steel solidification of two-phase continuous casting process3
The effect of neutral axis position on fundamental frequency of functionally graded Timoshenko beams in nonlinear temperature rise environment3
Numerical study on thermal and deformation analysis of biological tissue during thawing process3
Thermal and diffusion induced stresses of layered electrodes in the lithium-ion battery under galvanostatic charging3
Size-dependent free vibration and thermoelastic damping analysis of transversely isotropic circular plates with surface effect and non-local dual-phase-lag heat conduction model3
A crack in a confocal elliptical inhomogeneity embedded in an infinite matrix subjected to uniform heat flux3
Simulation of wave propagation in thermoporoelastic media with dual-phase-lag heat conduction3
Thermoelastic stresses alleviation for two-dimensional functionally graded cylinders under asymmetric loading3
Analysis of thermal stress in fabrication process of double-ceramic-layer thermal barrier coating system on a parabolic substrate3
The analysis and validation of natural frequencies and mode shapes of 3D plates in the framework of the generalized thermoelastic theory3
A hyper reduced order model for the transient thermo-mechanical behavior analysis of high temperature blades3
Semi-analytical solution for mixed supported and multilayered two-dimensional thermo-elastic quasicrystal plates with interfacial imperfections3
Numerical simulation of non–linear skin model with energy dissipation during hyperthermia and its validation with experimental data3
Computationally efficient simulation methodology for railway repair welding: Cyclic plasticity, phase transformations and multi-phase homogenization3
Influence of thermal load on a rotating thermoelastic medium with diffusion and double porosity3
Analysis of multi-phase lag gradients for a spherical cavity due to prescribed internal pressure3
Structural stability of a three-phase-lag heat conduction model for a rigid conductor3
Analytical solutions for thermo-elastic damping of rotational ring resonators incorporating thermal relaxations and elastic small scales3
Reflection of inhomogeneous waves in a rotating solid with fractional order magneto-thermoelasticity3
Investigation on buckling of Timoshenko nanobeams resting on Winkler-Pasternak foundations in a non-uniform thermal environment via stress-driven nonlocal elasticity and nonlocal heat conduction3
Effect of temperature on tensile, compressive, and shear strengths of composites3
Critical surface power of high-temperature nonmetallic electrical heaters2
On the well-posedness and stability of piezoelectric beams with magnetic effects, logarithmic damping, and Fourier-type thermal conduction2
A spatio-temporal nonlocal magneto-photothermal model incorporating rotation and dual phase-lag effects in semiconductor solids2
Exponential stability of a fully discrete energy associated to a thermoviscoelastic Timoshenko system2
Wave packet enriched finite elements for thermo-electro-elastic wave propagation problems with discontinuous wavefronts2
Stress waves in laser-material interaction: From atomistic understanding to nanoscale characterization2
Study of thermo-mechanical failure mechanisms of fuel assemblies for gas-cooled space nuclear propulsion system2
Numerical studies on temperature changes of finger2
A heat source interacting with a circular compressible liquid inclusion2
Hygro-thermo-mechanical analysis of sandwich shallow shells considering the effects of transverse normal strain2
Fundamental solution in a swelling porous medium containing a mixture of solid, liquid, and gas2
A study of the 3-phase lag model to a two-dimensional isotropic micro-polar thermoelastic medium with memory-dependent properties2
Coupled magneto-bioheat analysis in cylindrical porous bone with nonlocal thermoelasticity and memory kernels2
Effect of impedance boundary on reflection of thermoelastic plane waves in a nonlocal elastic solid with thermal relaxation2
Thermodynamical interactions in a nonlocal initially stressed fiber-reinforced thermoelastic medium with microtemperatures under GN-II model2
Experimental detection of mechanical deformations exploiting electromechanical effects2
Vibration behavior of nanobeams under the combined impact of temperature and flexomagnetic phenomena2
Transient hygrothermal response of an infinite solid cylinder with internal heat generation2
Reflection of coupled elastic waves in nonlocal rotating viscoelastic media2
Exponential stability of carbon nanotubes model with thermoelasticity of Coleman–Gurtin’s type2
Analytical and finite element study of thermally-induced blow-up in nonlinear delayed wave systems for viscoelastic beams2
Experimental and numerical investigation on optimization of welding parameters and prediction of temperature distribution during shielded metal arc welding of ultra high hard armor steel joints2
A hyper reduction model for fast thermo-mechanical coupling analysis of high-temperature components2
An elliptical compressible liquid inclusion in an infinite nonlinearly coupled thermoelectric matrix2
The ultrashort pulse laser ablation model of silicon based on the generalized thermoelastic theory with spatio-temporal nonlocal effect2
Three-dimensional semi-analytical solutions of arbitrary functionally graded piezoelectric doubly curved shell panel under thermo-electric load2
Thermal shock in a sphere due to a proton beam pulse2
Vibration characteristics of functionally graded graphene origami-enabled auxetic metamaterials plates supported by local elastic foundations in thermal environments2
Fractional order transient thermoelastic problem on purely radial right circular cone2
Exponential stability analysis of a thermoelastic piezoelectric beam with delay effects under Cattaneo’s law2
Electron and phonon temperatures: Application to the thermal-shock propagation in nanowires2
Tolerance allocation of mechanical assemblies including thermal deformation: A machine learning – based method2
Investigation on the thermoelastic response of a nanobeam in modified couple stress theory considering size-dependent and memory-dependent effects2
A nonlinearly coupled thermoelectric material with a parabolic inhomogeneity2
Reflection and transmission between an initially stressed magneto-thermoelastic rotating half-space with microtemperatures and an initially stressed magneto-thermoelastic rotating half-space2
Potential method in the coupled theory of thermoelastic triple-porosity nanomaterials2
On the exponential stability of a truncated porous elastic system with second sound thermoelasticity2
Three-dimensional Green’s functions for a steady-state point heat source in a two-phase transversely isotropic elastic solid with viscous interface2
Analytical solutions of simply supported laminated arches under non-uniform thermal loads considering temperature dependence2
On the existence and exponential decay rate of swelling porous thermoelastic system of Lord-Shulman type2
Thermal effect characterizations in piezoelectric film BAW resonators: A thermo-electro-mechanical model2
Thermoelastic contact behavior of functionally graded piezoelectric materials under conductive cylindrical punch2
Coupled thermoelastic transient analyses of truss-like structures via high-fidelity beam models2
Dynamic response of a finite rod based on the theory of time-fractional strain and heat conduction2
Analysis of a hollow cylinder with variable thermal conductivity and diffusivity by fractional thermoelastic diffusion theory2
0.1034209728241