Optics and Lasers in Engineering

Papers
(The TQCC of Optics and Lasers in Engineering is 9. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-11-01 to 2025-11-01.)
ArticleCitations
Self-assembling of PDMS microlens arrays through pyro-EHD for real-time 3D microscopy150
Absolute detection method based on multi-signal phase extraction and separation124
Editorial Board109
Editorial Board105
Interferometric method for simultaneous characterization of retardance and fast axis of a retarder98
Telecom-band high contrast narrowband metalens for 3D imaging85
Ultra high power laser cutting of 1-m reinforced concrete with gravity83
Novel fabrication and designs for hybrid optical elements with wider angle field of view by using integrated direct laser lithographic system76
Speckle-noise filtering based on non-local mean sparse principal component analysis method75
Zero-power optical convolutional neural network using incoherent light73
Multi-planar low-coherence diffraction imaging70
Multi-pitch nano-accuracy surface profiler for strongly curved X-ray mirror metrology59
Editorial Board59
Ophthalmic fundus camera design based on freeform surface for reducing refractive error sensitivity57
Polarized light vision pose measurement method by fusing the constraints provided between control points for hand-eye calibration55
Fast physic-informed mixer architecture for color Lensfree holographic reconstruction53
Terahertz compressed sensing imaging based on line array detection52
A novel temperature-strain synchronous measurement method52
High precision and sensitivity detection of gas measurement by laser wavelength modulation spectroscopy implementing an optical fringe noise suppression method51
High-SNR 3D dark-field microscopy based on orbital angular momentum extraction50
Design of a three-channel pixelated phase mask and single-frame phase extraction technique50
Transverse dynamical response of laser frequency-shifted feedback with mode mismatch48
Iteration of B-spline surface based deflectometric method for discontinuous specular surface48
A novel method to calibrate the rotation axis of a line-structured light 3-dimensional measurement system48
Non-line-of-sight imaging and location determination using deep learning46
Improvement of a Doppler simulator in optical performance45
High-frequency sinusoidal structured light generation with the anti-blaze condition of a digital micromirror device45
High-speed single-shot multiplane phase retrieval using quadratic distorted gratings for coherent diffraction imaging44
Self-compensation three-wavelength demodulation method for the large phase extraction of extrinsic Fabry–Pérot interferometric sensors43
Vortex spatial phase-shifting digital microscopic holography based on pixel traversal42
Hyperspectral vision beyond 3D: A review41
Shape from focus using gradient of focus measure curve40
High-speed road sign detection scheme based on ultrafast single-pixel scanning LiDAR40
Combined wide-field Mueller matrix polarimetry and PS-OCT for rapid polarization imaging of biological samples40
SSSAT-Net: Spectral-Spatial Self-Attention-Based Transformer Network for hyperspectral image classification40
Underwater optical image enhancement via an unsupervised contrastive learning-guided diffusion model39
Multiple sub-holograms optimization for holographic near-eye display based on holographic viewing-window39
Experimental study on infrared non-destructive testing technology for GFRP panels based on short pulse excitation39
Efficient multi-objective design method for optical coatings39
High-precision calibration and phase compensation method for structured light 3D imaging system38
Controllable optically induced rotation based on rotationally-symmetric power-exponent-phase vortex beams with high-efficiency38
High-resolution measurement of contact stresses and friction in indentation and machining by full-field photoelasticity38
A study of multi-dimensional defect size estimation of metal materials using LIBS spectral characterization37
Polarization image fusion method based on polarization saliency with generator adversarial network37
Fringe pattern denoising with a deep neural network37
Improved U-net network-based segmentation method for fast diffusion measurement36
A novel method for three-dimensional liquid surface topography measurement: Combining binocular vision with deep learning-based digital image correlation36
Spectral decay in multiple self-mixing interference for detecting turbidity36
Design of a resonator-bus-resonator anti-parity-time-symmetric integrated optical gyroscope36
Advanced-prediction compensation of distorted vortex beams in dynamic turbulence using a Pre-correction network36
Module for zooming in extended depth of focus in digital holographic microscopy36
A 3D shape measurement method for high-reflective surface based on accurate adaptive fringe projection35
Double phase computer generated on-axis multiplane holograms35
Camera motion-induced systematic errors in stereo-DIC and speckle-based compensation method35
Evaluation local strain of twisted bilayer graphene via moiré pattern35
Optimization of single-beam multiple-intensity reconstruction technique: Select an appropriate diffraction distance35
Photoelastic verification of certain recommendations for numerical modelling of fracture using the phase field method35
Dynamic control of bidirectional terahertz wavefront based on thermally active metasurfaces35
Untrained deep learning-based phase retrieval for fringe projection profilometry35
A 2D/3D convertible integral imaging display with enhanced depth of field35
Recent advances in Performance Enhancement Technologies for Structured Illumination Microscopy: A Comprehensive Review34
Rapid and precise detection of exhaled CO2 isotope ratios based on laser absorption spectroscopy34
Improving the accuracy of interferometer testing with absolute surface calibration and power spectral density analysis33
Generating controllable optical trap arrays with a polarization-based metalense33
Micro-LED optical properties distribution research based on AOTF hyperspectral imager using empirical cumulative function33
High-quality computer-generated holography via a complex-valued subpixel convolutional neural network33
A fast railway track surface extraction method based on bidirectional cloth simulated point clouds32
Image restoration of turbulent oceanic environment with particulates based on deep learning32
Classification of Mueller matrices based on the arrow forms and their components of purity32
Robust hyperspectral reconstruction via a multi-channel clustering compressive sensing approach32
Bioinspired compound eyes with integrated waveguides for anti-optical crosstalk32
Transmission mode synthetic aperture interferometry using a compact coherent imager and switched fiber-optic illumination31
Sub-micrometer pillar formation in fused silica using double-pulse back-surface laser ablation31
Effect of remelting power and remelting time on the morphological characteristics and mechanical properties of Fe-based clad layer31
Editorial Board30
Noncontact hardness assessment of carbon steel with nonlinear Rayleigh waves induced by grating laser30
Computationally convolutional ghost imaging30
Single line of sight frame camera based on the RadOptic effect of ultrafast semiconductor detector30
A calibration-free, non-invasive, and accurate total viable count detection method based on tunable diode laser absorption spectroscopy combined with most probable number counting29
(3N+1)-frame phase retrieval for double-grating Ronchi lateral shearing interferometry29
Noise-resistant two-wavelength interferometry for single-shot measurement of high-gradient flows29
Accurate and fast speckle interferometry in severe illumination conditions28
High-quality computational ghost imaging using ADMM fused with low-rank regularization28
Improved shape-from-focus reconstruction for high dynamic range freedom surface28
Initializing and accelerating Stereo-DIC computation using semi-global matching with geometric constraints28
Evaluation and analysis of target interpretation capability for novel rotating synthetic aperture system28
Femtosecond laser micromachining of suspended silica-core liquid-cladding waveguides inside a microfluidic channel28
Correction model of linear structured light sensor in underwater environment28
Common-path quantitative phase imaging by propagation through a sinusoidal intensity mask28
Combination of muller matrix polarimetry and z-scan techniques for nonlinear refractive index measurement28
Out-of-focus artifact removal for Fresnel incoherent correlation holography by deep learning27
Structural region-induced inpainting for highlight removal in microscopic damage measurement of metal pairs27
Bidirectional phase retrieval: Protecting the imaging of cells and tissues from interference of noise on the carrier27
Editorial Board27
A hand-crafted φ-OTDR event recognition method based on space-temporal graph and morphological object detection27
Non-interleaved quad-channel metasurfaces for simultaneous nanoprinting and holography enabled by phase and bidirectional intensity modulation27
Corrigendum to “Extrinsic calibration of non-overlapping multi-camera system with high precision using circular encoded point ruler” [Optics and Lasers in Engineering 174 (2024) 107927]27
Self-optimizing method and software for calibration and mapping of a laser system for laser machining27
Accurate and fast autofocusing in off-axis digital holography based on step reduction search and particle swarm optimization26
Optical method for measuring chromatic dispersion angles of the underlying surface based on the differential of detector channels26
Virtual line light source-based beam collimation for pulse-driven Gaussian-like VCSEL array emission26
Laser ultrasonic damage identification of composites based on empirical mode decomposition and neural network26
Polarization-selective modulation of meandered-line metamaterials with graphene surface plasmonics26
All-dielectric terahertz metalens using 3D-printing26
Resolution, accuracy and precision in super-resolved microscopy images using SUPPOSe26
Dynamic quantitative phase imaging based on Ynet-ConvLSTM neural network26
Rotating dual-retarders to correct polarization measurement error for division-of-amplitude polarimeter in full field of view26
Research on NDIR three-component gas sensor and its compensation technology25
Edge memory effect for hidden object tracking25
A quadrature demodulation method with digital subdivision and averaging for a heterodyne interferometer25
Simultaneous retrieval of aerosol size and composition by multi-angle polarization scattering measurements24
Performance of underwater wireless optical communication using Bessel beams and acousto-optic modulator24
Highly Stable Vibration Measurements by Common-path off-axis Digital Holography24
A highly sensitive refractive index based etched optical fiber sensor for detection of human sperm24
Accurate optical information transmission through thick tissues using zero-frequency modulation and single-pixel detection24
Optical-digital joint design of multi-order diffractive lenses for lightweight high-resolution computational imaging23
Light-powered microrobots: Recent progress and future challenges23
Enhanced focusing and imaging with super high-order Hilbert zone plates23
Performance enhancement of on-chip optical switch and memory using Ge2Sb2Te5 slot-assisted microring resonator23
Dispersion lens for chromatic confocal spectral interferometry23
U2R-pGAN: Unpaired underwater-image recovery with polarimetric gen23
The model and characteristics of polarized light transmission applicable to polydispersity particle underwater environment23
Femtosecond laser processing with aberration correction based on Shack-Hartmann wavefront sensor23
Predictive mechanisms for underwater laser backward detection channel in bubble-induced turbulence23
High-precision 2D grating displacement measurement system based on double-spatial heterodyne optical path interleaving23
Large-format grating groove density measurement method based on optical interferometry23
Method of 3D reconstruction of underwater concrete by laser line scanning23
An analytical study on the low-pass filtering effect of digital image correlation caused by under-matched shape functions23
Rapid calculation of computer-generated holograms for line-drawn 3D objects with varying thicknesses22
Real-time rendering of coastal waters simulation based on water optical properties22
Study on the superposition effect of stress waves and crack propagation law between blastholes at different angles22
Uncertainty-assisted virtual immunohistochemical detection on morphological staining via semi-supervised learning22
An improved active multi-image super-resolution method via hybrid subpixel images22
Imaging through multimode fibers using physics-assisted unsupervised learning22
Non-interference detection of digital signals in transmission line utilizing quantum sensor of nitrogen-vacancy centers22
Interferometric measurement of discontinuous surfaces based on morphology method22
Editorial Board21
An active method to improve the measurement accuracy of four-quadrant detector21
Using adaptive genetic algorithm optimize to realize the extended depth-of-field wavefront coding mask for a large field-of-view microscopy system21
Editorial Board21
A method to reduce the systematic error of line-structured light sensors based on light plane correction21
Flexible control of the focal spot with encoding metalens based on the digital addition principle of metasurfaces21
Spectrally tunable light source based on deep neural network model21
Fast in-situ imaging method using non-axial scanning confocal Raman microscope21
Endoir: A GAN-based method for fiber bundle endoscope image restoration21
Polarised full-waveform warning LIDAR with dust backscattering suppression21
A quantitative laser speckle-based velocity prediction approach using machine learning21
Phase-shift digital holography using multilayer ceramic capacitor actuators21
Dimensionality-reduced iterative ellipse fitting algorithm for fiber-optic sinusoidal frequency modulation interferometer quadrature signal correction20
The preparation and characterization of lubricant-infused silicone rubber surface based on laser-splicing-scan microstructure20
Hyperspectral image reconstruction based on the fusion of diffracted rotation blurred and clear images20
Polarization-direction multiplexed metasurfaces for optical information hiding and decryption20
Quasi-distributed pressure sensing based on microfiber loop resonator arrays and frequency division multiplexing20
Development of a high-sensitivity dual-axis optoelectronic level using double-layer liquid refraction20
Optical encryption using a sparse-data-driven framework20
Adaptive total variation based autofocusing strategy in ptychography20
Fluorescence molecular tomography via score-based generative model20
Single-shot wide-field full-stokes polarization imaging20
Low-coherence snapshot phase-shifting diffraction phase microscope20
Axicon lenses with chiral-focusing properties modeling by means of analytical functions20
Phase retrieval with dynamic linear combination in multiple intensity measurements20
Effect of swinging laser on porosity, microstructure, and mechanical properties of laser welded aluminum alloy joints with different lap forms20
Snapshot miniature optically replicating and remapping imaging spectropolarimeter (MINI-ORRISp): Design, calibration and performance19
Shape measurement and rapid identification of levitated nanoparticles based on scattering19
Terahertz metasurfaces modified with single-stranded DNA aptamers for the specific detection of TNF-α19
Infrared and visible image fusion based on a two-stage fusion strategy and feature interaction block19
Additive and subtractive manufacturing of gold micro/nanostructures by using laser trapping and ablation19
Anisotropic programmable metasurface beam splitter based on diode real-time control19
Investigation on repairing 30CrMnSiNi2A steel with laser additive and subtractive hybrid remanufacturing technology19
Intensity response model and measurement error compensation method for chromatic confocal probe considering the incident angle19
Phase unwrapping for projection moiré based on quaternary equal-width code19
Inter-sphere consistency-based calibration for camera–projector pairs19
U-Net based neural network for fringe pattern denoising19
SNR enhancement for Raman distributed temperature sensors using intrinsic modal functions with improved adaptive wavelet threshold denoising19
Frequency domain generative diffusion model for temporal compressive coherent diffraction imaging19
Dynamic-excitation-based steady-state non-line-of-sight imaging via multi-branch convolutional neural network19
Mueller matrix polarization parameter tomographic imaging method in the backscattering configuration19
Light field depth estimation based on multi-branch fusion framework for enhanced robustness in occlusion regions19
Connecting the microscopic depolarizing origin of samples with macroscopic measures of the Indices of Polarimetric Purity19
Coded speckle target: Design, analysis and applications19
Aberration and self-reconstruction of zero-order Bessel beams in isolated and array format generated using positive and negative axicon lenses18
A dual-stage correction approach for high-precision phase-shifter in Fizeau interferometers18
Geometric distortion correction of oblique incidence laser interferometer system for helical surface topography measurement18
3D non-destructive observation of thermal diffusion coefficient in optical fibers18
Dual-camera off-axis holographic particle tracking velocimetry: Development and application to air-blast swirl spray measurement18
Integrating photoluminescence with DIC for three-dimensional temperature and deformation field measurements in cryogenic environments18
3D deformation measurement of rotating blades based on concentric ring calibration and GPU-SIFT feature point searching18
Tunable chalcogenide solid-core anti-resonant fiber polarization filter based on SPR effect18
FRTCM: A method for motion estimation and image deblurring based on spectral feature prior18
Enhanced accuracy in 3D structured illumination microscopy through binary encoding with accelerated speed using sampling Moiré18
Parallel multi-slit modulation and decoding technique for high-resolution surface measurement in structured illumination microscopy17
Temporal division for time-varying phenomena observation using off-axis digital holography17
Iterative synthesis of binary inline Fresnel holograms for high-quality reconstruction in divergent beams with DMD17
LED source interferometer for microscopic fringe projection profilometry using a Gates’ interferometer configuration17
Fast color fourier Ptychographic microscopic imaging technology with fusion color correction17
High-speed spectrum demodulation of fiber-optic Fabry–Perot sensor based on scanning laser17
Signal extraction method based on spectral processing for a dual-channel SMI vibration sensor17
Adaptive iterative guided filtering for suppressing background noise in ptychographical imaging17
Non-contact and fast measurement of small roll angle using digital shearography17
Detection of defects in metallic materials using an improved post-processing method of pulsed thermography17
On-line measurement for velocity and particle size distribution of flowing aerosol by dynamic light scattering17
Real-time spectroscopy of modulation-instability-mediated optical wave breaking in normal dispersion17
Zero-order-free complex beam shaping17
Tailoring freeform beam-shaping lenses for edge-emitting lasers17
Multiplexed optical fiber tip refractive index sensor interrogated by microwave photonics17
A scattering spectrometer for white light interferometry17
Transverse additive manufacturing and optical evaluation of miniature thin lenses in ultracompact micro multi-spherical compound eye17
Deep-learning based reconstruction in optical scanning holography17
Temperature compensation of fiber optic unbalanced interferometers for high resolution static strain sensing17
Deep learning colorful ptychographic iterative engine lens-less diffraction microscopy17
Improving the cross-layer misalignment measurement accuracy by pattern-center shift induced error calibration17
Tunnel excavation slag volume measurement using triple-line structured-light vision: Rectification and optimization17
Surface form error measurement for rough surfaces using an infrared lateral shearing interferometry17
Advanced 3D AR display based on custom-designed asymmetric holographic microlens array with high fill factor17
Multidimensional high-temperature field measurement method for flame based on near infrared radiation spectrum of water vapor17
Evaluating spectral characteristics of narrow-linewidth fiber lasers in coherent beam combining system via using CDC metric17
Reference transmittance method constrained by the system constant for the retrieval of the aerosol extinction coefficient in scanning lidar measurements16
Absolute distance measurement without dead zone based on dual-channel dispersive interferometry using the femtosecond laser16
Improved polarization scattering imaging using local-global context polarization feature learning framework16
Application of UVAS and TDLAS-based multi-combustion-parameter diagnosis using computerized tomography16
An underwater image restoration based on global polarization effects of underwater scene16
LiMFusion: Infrared and visible image fusion via local information measurement16
Distinguishing tissue structures via polarization staining images based on different combinations of Mueller matrix polar decomposition parameters16
Editorial Board16
Monitoring the blades of a wind turbine by using videogrammetry16
Fabrication and packaging of whispering gallery mode rod resonators with adjustable coupling16
The synchronous measurement of mechanical and magnetic characteristics of superconducting materials in extreme environments16
Full-field three-dimensional system calibration for composite surfaces reconstruction16
Autofocusing of in-line holography based on compressive sensing16
Defects localization using the data fusion of laser Doppler and image correlation vibration measurements16
Programmable illumination smartphone microscopy (PISM): A multimodal imaging platform for biomedical applications16
Line structure light calibration based on a freely placed single cylindrical object16
Phasing detection method for the optical multiple-aperture system based on the pyramidal signal16
Hyperspectral imaging via a multiplexing digital micromirror device16
Optical beam steering using liquid-based devices16
Instant two-image diffractive lattice structured illumination microscopy using transfer learning16
Self-witnessing coherent imaging for artifact removal and noise filtering16
A lightweight object detection algorithm for coal and gangue with laser speckle imaging16
Estimating residual stresses of silicon wafer from measured full-field deflection distribution16
Effect of plume dynamics on surface contamination during interaction of millisecond infrared fiber laser with titanium16
Quantitative differential phase contrast phase reconstruction for sparse samples16
Virtual unrolling technology based on terahertz computed tomography16
Absolute phase retrieval based on spatial ternary phase coding with circular fringe projection15
Topological circular dichroism for asymmetric converging light beams15
Temporal self-referencing technique for the diagnostics of nanosecond laser pulse15
A lightweight neural network compatible with high-correlation broadband optical filters in computational spectroscopy15
Numerical Assessment of Horizontal Scanning LIDAR Performance Via Comparative Study Method15
Instantaneous rotational speed sensing method based on cam angle in wide-range15
Unidirectional structured light system calibration with auxiliary camera and projector15
Corrigendum to “Transport of intensity equation: A tutorial” Optics and Lasers in Engineering, Volume 135 (2020) 10618715
0.30196595191956