International Journal of Adhesion and Adhesives

Article	Citations
A review on epoxy-based electrically conductive adhesives	102
Plasma-assisted surface alteration of industrial polymers for improved adhesive bonding	67
The effect of multi-walled carbon nanotubes on the mechanical behavior of basalt fibers metal laminates: An experimental study	45
Addition of cellulose nanofibers extracted from rice straw to urea formaldehyde resin; effect on the adhesive characteristics and medium density fiberboard properties	44
Jute/Hemp bio-epoxy hybrid bio-composites: Influence of stacking sequence on adhesion of fiber-matrix	44
Advanced ultrasonic NDT for weak bond detection in composite-adhesive bonded structures	42
The effect of graphene nanoplatelets on the flexural properties of fiber metal laminates under marine environmental conditions	42
An overview of different types and potential of bio-based adhesives used for wood products	42
Tannin plywood bioadhesives with non-volatile aldehydes generation by specific oxidation of mono- and disaccharides	39
Development of soy protein-based adhesive with high water resistance and bonding strength by waterborne epoxy crosslinking strategy	39
Influence of sanding and plasma treatment on shear bond strength of 3D-printed PEI, PEEK and PEEK/CF	39
Adhesives for “debonding-on-demand”: Triggered release mechanisms and typical applications	38
Experimental and theoretical investigations of lignin-urea-formaldehyde wood adhesive: Density functional theory analysis	37
Improving the properties of urea-lignin-glyoxal resin as a wood adhesive by small addition of epoxy	36
Bonding performance of melamine-urea–formaldehyde and phenol-resorcinol–formaldehyde adhesive glulams at elevated temperatures	35
Environmentally friendly chitosan adhesives for plywood bonding	35
Enhancing thermal conductivity of epoxy with a binary filler system of h-BN platelets and Al2O3 nanoparticles	33
A comprehensive experimental study on bi-adhesive single lap joints using DIC technique	31
Low curing temperature tannin-based non-isocyanate polyurethane (NIPU) wood adhesives: Preparation and properties evaluation	30
Numerical modelling of bond behaviour between steel and CFRP laminates with a ductile adhesive	30
Investigation of carbon nanotube reinforcement to polyurethane adhesive for improving impact performance of carbon fiber composite sandwich panels	30
A review on bi-adhesive joints: Benefits and challenges	29
Recent developments in the performance of micro/nanoparticle-modified urea-formaldehyde resins used as wood-based composite binders: A review	29
Investigating the characteristics of cactus seeds by-product and their use as a new filler in phenol formaldehyde wood adhesive	28
Degradation mechanism of Acacia mangium tannin in NaOH/urea aqueous solution and application of degradation products in phenolic adhesives	28

Repairing concrete with epoxy adhesives	28
Thermoplastic polyurethane-based polycarbonate diol hot melt adhesives: The effect of hard-soft segment ratio on adhesion properties	28
Investigation of the differences between photochemical and photothermal laser ablation on the shear strength of CFRP/CFRP adhesive joints	27
Synthesis and performance evaluation of nanocomposite soy protein isolate/carbon nanotube (SPI/CNTs) adhesive for wood applications	27
Polyurethane hot melt adhesive based on Diels-Alder reaction	26
Compressive, dynamic and thermo-mechanical properties of cellulosic pineapple leaf fibre/polyester composites: Influence of alkali treatment on adhesion	26
High-performance epoxy-based adhesives modified with functionalized graphene nanoplatelets and triblock copolymers	26
Mode II interlaminar fracture toughness of woven E-glass/epoxy composites in the presence of mat interleaves	26
Development of a cornstarch adhesive for laminated veneer lumber bonding for use in engineered wood flooring	26
Polyurethane adhesive based on polyol monomers BHET and BHETA depolymerised from PET waste	25
Microencapsulation of polymeric isocyanate for the modification of urea-formaldehyde resins	25
Adhesive bonding of a mixed short and continuous carbon-fiber-reinforced Nylon-6 composite made via fused filament fabrication	24
Optimizing adhesive bonding between CFRP and Al alloy substrate through resin pre-coating by filling micro-cavities from sandblasting	24
Reinforced biobased adhesive for eco-friendly sandwich panels	24
Preparation and characterization of a melamine-urea-glyoxal resin and its modified soybean adhesive	24
Novel epoxy resin adhesives toughened by functionalized poly (ether ether ketone) s	24
Effect of Al:P ratio on bonding performance of high-temperature resistant aluminum phosphate adhesive	23
Durability and mechanical behavior of CFRP/Al structural joints in accelerated cyclic corrosion environments	23
Maleated lignin coreaction with phenol-formaldehyde resins for improved wood adhesives performance	23
Valorization of Moroccan brown seaweeds: Elaboration of formaldehyde-free particleboards based on sodium alginate–corn-starch - Mimosa tannin wood adhesives	23
Preparation of a starch-based adhesive cross-linked with furfural, furfuryl alcohol and epoxy resin	23
Effect of green modification of nanoclay on the adhesion behavior of EPDM rubber to polyester fabric	22
Evaluation of structural epoxy and cyanoacrylate adhesives on jointed 3D printed polymeric materials	22
Toward replacement of methyl methacrylate by sustainable bio-based isobornyl methacrylate in latex pressure sensitive adhesive	22
Oxidized cornstarch – Urea wood adhesive for interior particleboard production	22
Atmospheric air plasma jet for improvement of paint adhesion to aluminium surface in industrial applications	22
Influence of surface micropatterns on the mode I fracture toughness of adhesively bonded joints	22
A comparison and correlation between bitumen adhesion evaluation test methods, boiling and contact angle tests	22
Understanding the interaction between bonding strength and strain distribution of plywood	21
Addition of small amounts of graphene oxide in the polyol during the synthesis of waterborne polyurethane urea adhesives for improving their adhesion properties	21
Effect of hygrothermal aging and cyclic thermal shocks on the mechanical performance of single-lap adhesive joints	21
Replacing welding with adhesive bonding: An industrial case study	21
An experimental assessment of hybrid bolted/bonded basalt fiber reinforced polymer composite joints' temperature-dependent mechanical performances by static and dynamic mechanical analyses	21
An investigation of the fatigue performance of adhesively bonded step-lap joints: An experimental and numerical analysis	21
Effects of anodizing surface treatment on the mechanical strength of aluminum alloy 5083 to fibre reinforced composites adhesive joints	21
Effect of warm-air stream for solvent evaporation on bond strength of adhesive systems: A systematic review and meta-analysis of in vitro studies	21
Effects of molecular weight of hydroxyl telechelic natural rubber on novel cationic waterborne polyurethane: A new approach to water-based adhesives for leather applications	21
Bone glue - The final frontier for fracture repair and implantable device stabilization	21
Examining the effect of graphene nanoplatelets on the corrosion resistance of epoxy coatings	21
Mechanical, thermal properties and stability of high renewable content liquefied residual biomass derived bio-polyurethane wood adhesives	20
Mixed mode fracture characterization of brittle and semi-brittle adhesives using the SCB specimen	20
The effects of nanostructure additive on fracture strength in adhesively bonded joints subjected to fully reversed four-point bending fatigue load	20
Laser-induced groove optimization for Al/CFRP adhesive joint strength	20
MWCNT and nano-silica hybrids effect on mechanical and fracture characterization of single lap joints of GFRP plates	20
Improvement of structural, thermal and mechanical properties of epoxy composites and bonded joints exposed to water environment by incorporating boron nanoparticles	20
Appraisal of surface preparation in adhesive bonding of additive manufactured substrates	20
Preparation and characterization of gelatin-gallic acid/ZnO nanocomposite with antibacterial properties as a promising multi-functional bioadhesive for wound dressing applications	20
An overview of bio-adhesives for engineered wood products	20
Low pressure plasma treatment of CFRP substrates for adhesive bonding: an investigation of joint durability under severe temperature-moisture conditioning	19
Under water glued stud bonding fasteners for offshore structures	19

The effects of service temperature on the fatigue behavior of a polyurethane adhesive joint	19
Experimental analysis of tensile and compressive failure load in single-lap adhesive joint of green composites	19
Modern thermoplastic (hot glue) versus organic-based adhesives and haft bond failure rate in experimental prehistoric ballistics	19
Reducing free formaldehyde emission, improvement of thickness swelling and increasing storage stability of novel medium density fiberboard by urea-formaldehyde adhesive modified by phenol derivatives	18
Enhancing strength and toughness of adhesive joints via micro-structured mechanical interlocking	18
The effects of adherend thickness on the fatigue strength of adhesively bonded single-lap joints	18
A cold-set wood adhesive based on soy protein	18
Interfacial bond behaviour between hybrid carbon/basalt fibre composites and concrete under dynamic loading	18
Influence of the UV crosslinking method on the properties of acrylic adhesive	18
Sandblasting parameter variation effect on galvanized steel surface chemical composition, roughness and free energy	18
Effect of dodecafluoroheptyl methacrylate (DFMA) on the comprehensive properties of acrylate emulsion pressure sensitive adhesives	17
Bond stiffness estimation with shear horizontal guided waves generated using PPM-EMATs	17
Influence of silane-hydrolysate coupling agents on bitumen–aggregate interfacial adhesion: An exploration from molecular dynamics simulation	17
Characterization of the effect of an epoxy adhesive in hybrid FSW-bonding aluminium-steel joints for naval application	17
Comparison of novel surface treatments of Al 2024 alloy for al/cfrp adhesive bonded joints	17
The effect of repeated alkali pretreatments on the morphological characteristics of cellulose from oil palm empty fruit bunch fiber-reinforced epoxy adhesive composite	17
Relationship between the surface free energy and stiffness modulus of bitumen modified with micro-nano-carbon black from end-of-life tires	17
Fatigue crack growth in aluminum panels repaired with different shapes of single-sided composite patches	17
Performance of particleboards based on annual plant byproducts bound with bio-adhesives	17
Electrical properties of electrically conductive adhesives from epoxy and silver-coated copper powders after sintering and thermal aging	17
Improved adhesion of polyurethane-based nanocomposite coatings to tin surface through silane coupling agents	17
Experimental investigation of the effects of adhesive thickness on the fracture behavior of structural acrylic adhesive joints under various loading rates	16
Mucoadhesive properties of polyacrylates: Structure – Function relationship	16
Effect of the surface morphology of SLM printed aluminium on the interfacial fracture toughness of metal-composite hybrid joints	16
The use of lignin in emulsion-based pressure-sensitive adhesives	16
Fracture mechanisms of hybrid adhesive bonded joints: Effects of the stiffness of constituents	16
Experimental and numerical study of polyethylene hybrid joints: Friction stir spot welded joints reinforced with adhesive	16
Damage and strength analysis of Carbon Fiber Reinforced Polymer and Titanium tubular-lap joint using hybrid adhesive design	16
Effect of shelf-life of a universal adhesive to dentin	16
Comparison of the properties of flax shives based particleboards prepared using binders of bio-based lignin and partially bio-based epoxy resin	16
Positive impact of carbohydrate on the crosslinking, performance, and potential applications of defatted soybean flour-based adhesive	16
Effect of surface treatment methods on the interfacial behavior of fiber metal laminate based on WE43 magnesium alloy	16
Study of adhesion properties and mechanism of sodium silicate binder reinforced with silicate fume	16
In-vivo study of ultrafine-grained CP-Ti dental implants surface modified by SLActive with excellent wettability	16
In vitro evaluation of skin adhesives during perspiration	16
Adhesive joint properties of advanced carbon/ceramic composite and tungsten–copper alloy for the hybrid rocket nozzle	15
Effect of salt spray ageing on the fracture of composite-to-metal bonded joints	15
Hydrolytic stability of polyurethane/polyhydroxyurethane hybrid adhesives	15
Implementation of a probabilistic machine learning strategy for failure predictions of adhesively bonded joints using cohesive zone modeling	15
A comprehensive investigation into the structure-property relationship of wax and how it influences the properties of hot melt adhesives	15
Investigation of polyurethane-based pressure-sensitive adhesives with castor oil as a polyol	15
Using contact angle measurement technique for determination of the surface free energy of B-SBA-15-x materials	15
A review on electrostatic powder coatings for the furniture industry	15
Synthesis of phosphorus-containing polyol and its effects on impact resistance and flame retardancy of structural epoxy adhesives	15
Influence of atmospheric pressure plasma process parameters on the mechanical behavior of thermoplastic joints	15
Structural adhesive bonding characterization using guided Lamb waves and the vertical modes	15
Fatigue crack growth in laser-treated adhesively bonded composite joints: An experimental examination	14
Glycerol-based polymer adhesives reinforced with cellulose nanocrystals	14
Effects of glue-line thickness and manufacturing defects on the pull-out behavior of glued-in rods	14
Synthesis and characterization of low-temperature polyamide 6 (PA6) copolyamides used as hot melt adhesives and derived from the comonomer of novel aliphatic diamine bis(2-aminoethyl) adipamide and ad	14
Pressure-sensitive adhesives based on acrylated epoxidized linseed oil: A computational approach	14
Synthesis of micro carbonaceous material by pyrolysis of rubber wood and its effect on properties of urea-formaldehyde (UF) resin	14
Preparation and characterization of a bio-based polymeric wood adhesive derived from linseed oil	14
Orthodontic resin containing bioactive glass: Preparation, physicochemical characterization, antimicrobial activity, bioactivity and bonding to enamel	14
Effects of temperature and moisture on the fracture behaviour of composite adhesive joints	14
New hybrid acrylic/collagen nanocomposites and their potential use as bio-adhesives	14
An environmentally-friendly soybean based resin as an alternative to formaldehyde-based counterpart for biomass composites	14
Application of ultrasonic welding to repair adhesively bonded short carbon fiber reinforced Nylon 6 composites	14
Flexural capacity of continuous reinforced concrete beams strengthened or repaired by CFRP/GFRP sheets	14
Obtaining and use adhesive promoters to bitumen from the phenolic fraction of coal tar	14
Development of ethylene-vinyl acetate copolymer/graphene oxide nanocomposites for crystalline silicon photovoltaic modules	14
Formaldehyde adsorption capacity of chitosan derivatives as bio-adsorbents for wood-based panels	14
Material non-linearity in the numerical analysis of SLJ bonded with ductile adhesives: A meshless approach	14
Investigation of joining of continuous glass fibre reinforced polypropylene laminates via fusion bonding and hotmelt adhesive film	14
Polyethylene wax as an alternative to mineral fillers for preparation of reinforced pressure-sensitive adhesives	13
Pulsed laser texturing for improved adhesive-bonded polyethylene (PE) joints	13
Durability of adhesively bonded CFRP-aluminum alloy joints subjected to coupled temperature and alternating load	13
Plywood wood based composites using crystalline/amorphous PLA polymer adhesives	13
The application research of benzyl methacrylate (BzMA) in acrylate latex pressure sensitive adhesives	13
Effect of grit-blasting on the fracture toughness of hybrid titanium-thermoplastic composite joints	13
Curing mechanism of triglycidylamine crosslinked soybean protein adhesive analyzed by Fourier transform infrared, second derivative infrared and two-dimensional correlation spectroscopy	13
Effects of accelerated ageing on the mechanical properties of adhesive joints between stainless steel and polymeric top coat materials for marine applications	13
Effect of surface anodizing on the bonding properties of aluminum alloy/glass-fiber reinforced polypropylene random copolymer hybrid joints	13
Experimental methods to capture curing induced effects in adhesive bonded joints	13
Pretreatment using diluted epoxy adhesive resin solution for improving bond strength between steel and wood surfaces	13
The synergistic effect of micron spherical and flaky silver-coated copper for conductive adhesives to achieve high electrical conductivity with low percolation threshold	13
RETRACTED: Graphene oxide-modified dental adhesive for bonding orthodontic brackets	13
The debonding failure analysis of corroded pipes repaired with CFRP under tension and the bending moment	12
Quantification of mixed mode loading and bond line thickness on adhesive joint strength using novel test specimen geometry	12
Glycerol-silicone adhesives with excellent fluid handling and mechanical properties for advanced wound care applications	12

Bacterial adhesion capacity of protein-terminating polyelectrolyte multilayers	12
Effect of stress rate on shear strength of aluminium alloy single lap joints bonded with epoxy/nanoalumina adhesives	12
Temperature effects on failure mode of double lap glass-aluminum and glass-GFRP joints with epoxy and acrylic adhesive	12
Enhanced properties of a soybean adhesive by modification with a cycloaliphatic epoxy resin	12
Effect of surface morphology on the Ti–Ti adhesive bond performance of Ti6Al4V parts fabricated by selective laser melting	12
On the influence of mechanical loadings on the porosities of structural epoxy adhesives joints by means of in-situ X-ray microtomography	12
Hygrothermal aging, fatigue and dynamic mechanical behavior of cellulosic particles reinforced one-component moisture curable polyurethane adhesive joints	12
Characterization of suberinic acids from birch outer bark as bio-based adhesive in wood composites	12
Stress distribution in double-lap adhesive joints: Effect of adherend reinforcement layer	12
Improved water resistance of TA-modified soy adhesive: Effect of complexation	12
Polyethylene FSSW/Adhesive hybrid single strap joints: Parametric optimization and FE simulation	12
Fatigue life evaluation of Al-GFRP bonded lap joints under four-point bending using strain-life criteria	12
Ozone functionalized graphene nanoplatelets and triblock copolymer hybrids as nanoscale modifiers to enhance the mechanical performance of epoxy adhesives	11
Impact of the processing method on the properties of castor oil/cellulose acetate polyurethane adhesives for bonding wood	11
Effect of lamina fiber orientation interfaced with semi-flexible adhesive layer on strength and failure mode of composite single-lap joints	11
Adhesive strength and micromechanics of wood bonded at low temperature	11
Cu@Ag nanoparticles doped micron-sized Ag plates for conductive adhesive with enhanced conductivity	11
Experimental and numerical study on Mode I and Mode II interfacial fracture toughness of co-cured steel-CFRP hybrid composites	11
Easy removable and UV tunable biobased waterborne pressure sensitive adhesives	11
Adhesion and viscoelastic property of poly(ethylene-co-vinyl acetate) based hot melt adhesives- effects of tackifier and wax	11
Effect of sealing treatment on mechanical properties of CFRP-Aluminum alloy single lap joints	11
Effect of anodizing surface morphology on the adhesion performance of 6061 aluminum alloy	11
Effect of surface morphology on the adhesion of silicone elastomers on AA6061 aluminum alloy	11
Numerical analysis of the dynamic behaviour of adhesive joints: A review	11
Comparative study of failure models for prediction of mixed-mode failure characteristics in composite adhesively bonded joint with brittle/Quai-brittle adhesive using finite element analysis	11
On the influence of the adhesive and the adherend ductility on mode I fracture characterization of thick adhesively-bonded joints	11
Flexible tubular metal-polymer adhesive joints under torsion loading	10
Elastic flexural analysis of adhesively bonded similar and dissimilar beams using refined zigzag theory and peridynamic differential operator	10
Modification of novel bio-based adhesive made from citric acid and sucrose by ZnCl2	10
Quantitative evaluation for the ASTM D4541-17/D7234 and ASTM D3359 adhesion norms with digital optical microscopy for surface modifications with flame and APPJ	10
Effects of surface preparation on the adhesion of UV-aged polyurethane coatings	10
Viscoelastic model to capture residual stresses in heat cured dissimilar adhesive bonded joints	10
The effect of the amount and particle size of the waste quartz powder on the adhesive properties of epoxy resin coatings	10
Differences in adhesion between 1C-PUR and MUF wood adhesives to (ligno)cellulosic surfaces revealed by nanoindentation	10
Multi-acrylate-based UV-curable dismantlable adhesives	10
Effect of surface pattern on strength of structural lightweight bonded joints for marine applications	10
Acidic buffering capacity and curing process of melamine-urea-formaldehyde resin	10
A soybean adhesive with excellent hygrothermal resistance and enhanced mildew resistance via optimal synthesis of polyamidoamine–epichlorohydrin resin	10
Numerical analysis of the strength and interfacial behaviour of adhesively bonded joints with varying bondline thicknesses	10
Effect of hygrothermal-mechanical exposure on the residual strength of adhesively bonded joints	10
A novel method of temporary solidification and extraction of underwater fragile relics in their original state	10
Experimental and finite element analysis of push-out shear test for adhesive joints between pultruded GFRP and concrete	10
Effectiveness of polymeric and cementitious materials to secure cracks in concrete under diverse circumstances	10
Testing methods for shear strength of bond line between concrete and different types of engineered wood	10
Creep behaviour and tensile response of adhesively bonded polyethylene joints: Single-Lap and Double-Strap	10
Review of experimental techniques for impact property of adhesive bonds	10
Preparation and properties of ultraviolet/thermal dual-curable polyurethane acrylate	10
A bio-inspired exploration of eco-friendly bael gum and guar gum-based bioadhesive as tackifiers for packaging applications	9
Shock absorption of semi-interpenetrating network acrylic pressure-sensitive adhesive for mobile display impact resistance	9
Study of scavengers for free formaldehyde reduction in phenolic resins used in polychloroprene based contact adhesives	9
Experimental investigation of Cu-SS electromagnetically assisted adhesive tube-to-tube joining: Its advantages over electromagnetic crimping	9
Antibacterial activity and bond strength of silver nanoparticles modified orthodontic bracket adhesive: A systematic review and meta-analysis of in-vitro and in-vivo studies	9
On the flexural response of nanoparticle-reinforced adhesively bonded joints mating 3D-Fiber Metal Laminates – A coupled numerical and experimental investigation	9
Investigation of the high temperature performance of a polyurethane adhesive used for structural wood composites	9
Assessment of interface failure behaviour for brittle adhesive using the three-point bending test	9
The use of synthetic and natural fibers in epoxy coatings: A comparative mechanical and economic analysis	9
Development of pipe repairs using bonded metal plate – Part I: Shape factor, stiffness and surface treatment	9
Influence of high-temperature and high-humidity aging on the material and adhesive properties of addition curing silicone adhesives	9
Investigation of the migration ability of silicone and properties of waterborne polyurethanes	9
A novel nonlinear Lamb wave based approach for detection of multiple disbonds in adhesive joints	9
Preparation of a one-component epoxy adhesive using PET bottle waste derived terephthalic dihydrazide as latent curing agent	9
Preparation and characterization of wood-to-wood bonding adhesive by glycidyl methacrylate grafting natural rubber	9
Effects of flaming on polypropylene long glass fiber composites for automotive bonding applications with polyurethane	9
Characterization of adhesive joints under high-speed normal impact: Part I – Experimental studies	9
Feasibility study on hybrid weld-bonding between dissimilar material for automotive industry	9
Evaluation of crack growth behaviors under Mode I static loading for two-part polyurethane adhesives	9
Effects of concrete type, concrete surface conditions and wood species on interfacial properties of adhesively-bonded timber – Concrete composite joints	9
Physicochemical characterization of glass and polyethylene surfaces treated with different surfactants and their effects on bacterial adhesion	9
Experiment and simulation study on bonded, bolted and hybrid bolted/bonded joints of textile CFRP using bimodulus constitutive model	9
Comparison of the effects of various reinforcements on the mechanical, morphological, thermal and surface properties of poly(butylene succinate)	9
Thermal characterization and diffusivity of two mono-component epoxies for transformer insulation	9
Effects of surface modification and graphene nanoplatelet reinforcement on adhesive joint of aluminium alloys	9
Experimental investigation on multiaxial ratchetting behaviour and fatigue life of silicone seal adhesive bonding butt-joints	9
Effect of elevated temperatures and humidity on glass/steel adhesive joints	8
Effects of 3D-printing surface morphologies on interfacial bonding strength between Ti–6Al–4V and CFRTP with PMCs interlayer	8
Analysis of contact area in a continuous application-and-peel test method for prepreg tack	8
Adhesive hardening and plasticity in bonded joints	8
Semi-liquefied bamboo modified urea-formaldehyde resin to synthesize composite adhesives	8
Influence of single or multi-factor coupling of temperature, humidity and load on the aging failure of adhesively bonded CFRP / aluminum alloy composite joints for automobile applications	8
Mineral precipitation, polymerization properties and bonding performance of universal dental adhesives doped with polyhedral oligomeric silsesquioxanes	8
Preparation of a nano-silica modified melamine formaldehyde resin	8
Blending caproylated starch with poly(acrylic acid)-g-protein-g-poly(methyl acrylate) as an adhesive material to improve the adhesion of starch to PLA fibers	8
Improvement of curing reaction activity of one-component room temperature-curable epoxy adhesive by the addition of functionalized graphene oxide	8
Cross-linking/sulfonation to improve paste stability, adhesion and film properties of corn starch for warp sizing	8
Graphene as reinforcing filler in polyvinyl acetate resin	8
Application of silver nanoparticles in situ synthesized in dental adhesive resin	8
The influence of ion exchange in zeolite X on the properties of phenol-formaldehyde composites	8
The synergistic effect of hybrid nano-silica and GNP additives on the flexural strength and toughening mechanisms of adhesively bonded joints	8
A new method for estimating wood failure percentage in adhesive-bonded shear specimens	8
Mode I fracture R-curve and cohesive law of CFRP composite adhesive joints	8
Performance and failure assessment of adhesively bonded non-crimp fabric carbon fiber/epoxy composite single lap joints	8
Atmospheric-pressure plasma treatments of NBR for the improvement of adhesion in footwear applications	8
Mechanical and chemical analysis of structural silicone adhesives with the influence of artificial aging	8
Effect of antioxidant/reducing agents on the initial and long-term bonding performance of a self-etch adhesive to caries-affected dentin with and without smear layer-deproteinizing	8
Effect of graphene nano-particle reinforcement on the fatigue behavior of adhesively bonded single lap joints	8