International Journal of Heat and Fluid Flow

Papers
(The TQCC of International Journal of Heat and Fluid Flow is 5. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-11-01 to 2024-11-01.)
ArticleCitations
Recurrent neural networks and Koopman-based frameworks for temporal predictions in a low-order model of turbulence50
LES investigation on the dependence of the flow through a centrifugal pump on the diffuser geometry34
Deep reinforcement learning for turbulence modeling in large eddy simulations34
A CFD model of frost formation based on dynamic meshes technique via secondary development of ANSYS fluent34
Predicting high-fidelity multiphysics data from low-fidelity fluid flow and transport solvers using physics-informed neural networks33
LES study on the influence of the diffuser inlet angle of a centrifugal pump on pressure fluctuations31
The wake flow downstream of a propeller-rudder system30
Numerical analysis of the flow pattern in convergent vortex tubes for cyclone cooling applications29
Electro-thermo-convection in a differentially heated square cavity under arbitrary unipolar injection of ions29
Impact of vacuum degree on the aerodynamics of a high-speed train capsule running in a tube29
Evaluation of variable rotation on enhancing thermal performance of phase change heat storage tank28
RANS simulations for transition and turbulent flow regimes in wire-wrapped rod bundles28
Numerical study of magnetohydrodynamic mixed convection and entropy generation of Al28
Experimental and numerical study on flow characteristics and heat transfer of an oscillating jet in a channel27
Numerical investigation on the unsteady vortical structure and pressure pulsations of a centrifugal pump with the vaned diffuser26
Heat transfer intensification by EHD conduction pumping for electronic cooling applications26
Machine-learning for turbulence and heat-flux model development: A review of challenges associated with distinct physical phenomena and progress to date23
A comparison between head-on quenching of stoichiometric methane-air and hydrogen-air premixed flames using Direct Numerical Simulations22
Development of the wake shed by a system composed of a propeller and a rudder at incidence21
Direct numerical simulation of turbulent heat transfer on the Reynolds analogy over irregular rough surfaces21
Aerodynamic drag improvements on a square-back vehicle at yaw using a tapered cavity and asymmetric flaps21
Considerations for the design of swirl chambers for the cyclone cooling of turbine blades and for other applications with high swirl intensity20
Investigations on the effect of rotational speed on the transport of air-water two-phase flows by centrifugal pumps20
State estimation in minimal turbulent channel flow: A comparative study of 4DVar and PINN20
An iterative machine-learning framework for RANS turbulence modeling20
Experimental investigation of turbulent flow characteristics in cross-flow planes of a 5×<18
Wall-modeled LES of shock-wave/boundary layer interaction17
A numerical approach to radiative ternary nanofluid flow on curved geometry with cross-diffusion and second order velocity slip constraints17
Influence of thermal wall boundary condition on scalar statistics during flame-wall interaction of premixed combustion in turbulent boundary layers17
Heat transfer enhancement of forced convection magnetized cross model ternary hybrid nanofluid flow over a stretching cylinder: Non-similar analysis17
Cross flow over two heated cylinders in tandem arrangements at subcritical Reynolds number using large eddy simulations16
Some new characteristics of the confined flow over circular cylinders at low reynolds numbers16
Global stability analysis of a 90°-bend pipe flow16
Aerodynamic drag reduction by means of platooning configurations of light commercial vehicles: A flow field analysis16
Direct numerical simulation of turbulent heat transfer in a square duct with transverse ribs mounted on one wall15
Assessment on heat transfer deterioration to supercritical carbon dioxide in upward flows via large eddy simulation15
Data-driven turbulence modeling in separated flows considering physical mechanism analysis15
Heat transfer and fluid flow characteristics of a turbulent wall jet with a wavy wall15
Prediction of the drag reduction effect of pulsating pipe flow based on machine learning15
Deep reinforcement learning for active control of flow over a circular cylinder with rotational oscillations15
A hybrid dynamic Smagorinsky model for large eddy simulation14
A drag coefficient model for Lagrangian particle dynamics relevant to high-speed flows14
Stochastic modeling of surface scalar-flux fluctuations in turbulent channel flow using one-dimensional turbulence14
Understanding loss generation mechanisms in a centrifugal pump using large eddy simulation13
Dynamical vapour pocket of an impacting Leidenfrost droplet: Evaporation and scaling relations13
Effects of buoyancy and thermophysical property variations on the flow of supercritical carbon dioxide13
Experimental and numerical study on the falling film flow characteristics outside circular tube applied in floating liquefied natural gas (FLNG) under offshore conditions13
DNS of secondary flows over oscillating low-pressure turbine using spectral/hp element method13
Study on fluid dynamic characteristics of a low specific speed centrifugal pump with emphasis on trimming operations13
Experimental measurements of fluid flow in an 84-pin hexagonal rod bundle with spacer grid for a gas-cooled fast modular reactor13
Hairpin vortices in the largest scale of turbulent boundary layers13
Characterization of flow field and combustion dynamics in a novel pressurized side-wall quenching burner using high-speed PIV/OH-PLIF measurements13
Direct numerical simulation of fluid flow in a 5x5 square rod bundle13
Swirl number and nozzle confinement effects in a flat-vane axial swirler13
Large-eddy simulation of turbulent channel flow at transcritical states13
A hybrid immersed boundary/wall-model approach for large-eddy simulation of high-Reynolds-number turbulent flows12
Empirical investigation of nanofluid performance in a microchannel heat sink for various attributes in low Reynolds number range12
Experimental and numerical studies on enhanced effusion cooling with shallowly dimpled film holes on double-wall structure surface12
Flow physics of normal and abnormal bioprosthetic aortic valves12
Effects of streamwise aspect ratio on the spatio-temporal characteristics of flow around rectangular cylinders12
Lower drag and higher lift for turbulent airfoil flow by moving surfaces12
Experimental studies on wake structures of a circular cylinder with different surface roughness heights12
Effect of the conical diffuser angle on the confined swirling flow induced Precessing Vortex Core11
Non-equilibrium wall functions for large Eddy simulations of complex turbulent flows and heat transfer11
Influence of rounding corners on the wake of a finite-length cylinder: An experimental study11
Turbulent flow over a cylinder confined in a channel at Re = 3,90011
Analysis of the turbulent flow in a partially blocked wire-wrapped rod bundle using LES with wall functions11
Conjugate heat transfer in the unbounded flow of a viscoelastic fluid past a sphere11
Numerical study of flow and heat transfer during a high-speed micro-drop impact on thin liquid films11
Numerical simulation of the deformation and breakup of a two-core compound droplet in an axisymmetric T-junction channel11
Sparse Bayesian Learning of Explicit Algebraic Reynolds-Stress models for turbulent separated flows10
Predicting the temporal dynamics of turbulent channels through deep learning10
A mesoscopic modelling approach for direct numerical simulations of transition to turbulence in hypersonic flow with transpiration cooling10
A formulation of PANS capable of mimicking IDDES10
Direct numerical simulation of the two-dimensional speed bump flow at increasing Reynolds numbers10
An extensive numerical benchmark of the various magnetohydrodynamic flows10
Turbulence control in plane Couette flow using low-dimensional neural ODE-based models and deep reinforcement learning10
Analysis of mixed convective stagnation point flow of hybrid nanofluid over sheet with variable thermal conductivity and slip Conditions: A Model-Based study10
Determination of groove shape with strong destabilization and low hydraulic drag10
Robust training approach of neural networks for fluid flow state estimations10
Use of 2-D and 3-D unsteady RANS in the computation of wall bounded buoyant flows10
On the explainability of machine-learning-assisted turbulence modeling for transonic flows10
Investigation of mixing processes of effusion cooling air and main flow in a single sector model gas turbine combustor at elevated pressure10
Dimensionality reduction of non-buoyant microconfined high-pressure transcritical fluid turbulence10
Data-driven enhancement of coherent structure-based models for predicting instantaneous wall turbulence10
Intense Reynolds-stress events in turbulent ducts10
Numerical investigation of various twisted tapes enhancing a circular microchannel heat sink performance9
Large eddy simulation and experiment of shear breakup in liquid-liquid jet: Formation of ligaments and droplets9
Wall shear stress modified by bubbles in a horizontal channel flow of silicone oil in the transition region9
Aerodynamic thermal environment around transonic tube train in choked/unchoked flow9
Pressure drop and friction factor study for an airfoil-fin printed circuit heat exchanger using experimental and numerical techniques9
Interfacial relaxation – Crucial for phase-field methods to capture low to high energy drop-film impacts9
A comparison of hydrodynamic and thermal properties of artificially generated against realistic rough surfaces9
Computational fluid dynamic simulations informed by CT and 4D flow MRI for post-surgery aortic dissection – A case study9
The uniform-momentum zones and internal shear layers in turbulent pipe flows at Reynolds numbers up to <9
Dynamics of the jet flow issued from a lobed Nozzle: Tomographic particle image velocimetry measurements9
A comparative study of flame-wall interaction and flame-cooling air interaction9
Stress equation based scaling framework for adverse pressure gradient turbulent boundary layers9
Aerofoil dipole noise due to flow separation and stall at a low Reynolds number9
Counter-rotating Taylor-Couette flows with radial temperature gradient9
Numerical analysis of non-excited and excited jets issuing from non-circular nozzles9
Towards optimal β-variational autoencoders combined with transforme9
Hysteresis of two-dimensional flows around a NACA0012 airfoil at Re9
Experimental investigation of nose-tip bluntness effects on the hypersonic crossflow instability over a cone9
Flow development over isolated droplet-inspired shapes8
A scale-based study of the Reynolds number scaling for the near-wall streamwise turbulence intensity in wall turbulence8
Numerical and experimental analysis of poly-dispersion effects on particle-laden jets8
Analysis of turbulence structures and the validity of the linear Boussinesq hypothesis for an infinite tube bundle8
The influence of wall heating on turbulent boundary layer characteristics during mixed convection8
Feasibility assessment of using nanofluids in shell and tube heat exchanger of gas pressure reducing stations through a new developed OpenFOAM solver8
A new numerical method for determining heat transfer and packing distribution in particle heat exchangers for concentrated solar power8
Drag reduction by means of an array of staggered circular cavities at moderate Reynolds numbers7
Thermal examination for double diffusive MHD Jeffrey fluid flow through the space of disc and cone apparatus subject to impact of multiple rotations7
Validating the design optimisation of ultrasonic flow meters using computational fluid dynamics and surrogate modelling7
Resolvent-based design and experimental testing of porous materials for passive turbulence control7
Effects of radius ratio on turbulent concentric annular pipe flow and structures7
Heat transfer and skin-friction in a turbulent boundary layer under a non-equilibrium longitudinal adverse pressure gradient7
On the generation mechanisms of low-frequency synchronous pressure pulsations in a simplified draft-tube cone7
The spreading and sliding characteristics of droplet impingement on an inclined hydrophobic surface at low Weber numbers7
On the relationship between drag and vertical velocity fluctuations in flow over riblets and liquid infused surfaces7
Layered structure of turbulent plane wall jet7
Leading edge vortex formation and detachment on a flat plate undergoing simultaneous pitching and plunging motion: Experimental and computational study7
Wall temperature effects on shock unsteadiness in a reattaching compressible turbulent shear layer7
Data-driven assessment of arch vortices in simplified urban flows7
A dynamic particle scale-driven interphase force model for water-sand two-phase flow in hydraulic machinery and systems7
Direct numerical simulation of turbulent flow separation induced by a forward-facing step7
Numerical investigations of the wake behind a confined flat plate7
How do the liquid properties affect the entrapment of bubbles in gas sheared liquid flows?7
Drag reduction of a square-back bluff body under constant cross-wind conditions using asymmetric shear layer forcing6
Coherent structures in the turbulent stepped cylinder flow at R6
Experimental study on the intrusion and stratification produced by confined laminar and turbulent round fountains6
Onset of shear-layer instability at the interface of parallel Couette flows6
Neural-network based approach for modeling wall-impact breakage of agglomerates in particle-laden flows applied in Euler–Lagrange LES6
Direct numerical simulation of a turbulent Couette-Poiseuille flow, part 2: Large- and very-large-scale motions6
Vapor concentration and bimodal distributions of turbulent fluctuations in cavitating flow around a hydrofoil6
Benchmark PIV database for the validation of CFD simulations in a transitional cavity flow6
The velocity and thermal fields of two parallel plane jets using simultaneous PIV and two-color LIF measurements6
Numerical analysis of mathematical model for heat and mass transfer through Bioconvective Maxwell nanofluid flow subject to Darcy-Forcheimer and Lorentz forces6
Wall modeling of turbulent methane/oxygen reacting flows for predicting heat transfer6
The effect of a high-speed rotational oscillating cylinder on a heated cylinder6
On the friction drag reduction mechanism of streamwise wall fluctuations6
Effect of leading-edge curvature on the aerodynamics of insect wings6
Imposing virtual origins on the velocity components in direct numerical simulations6
A methodology for coupling DNS and discretised population balance for modelling turbulent precipitation6
Studying turbulent flows with physics-informed neural networks and sparse data6
Extension of an algebraic intermittency model for better prediction of transition in separated layers under strong free-stream turbulence6
Flow structures of the cross-flow over a five-layer helically coiled steam generator geometry6
Flow-induced vibrations in long rows of cylinders and their links to convective instabilities6
Flow investigation of circular cylinder having different cavities in shallow water6
Direct numerical simulations of a turbulent channel flow developing over convergent–divergent riblets6
Numerical evaluation of the ferrofluid behaviour under the influence of three-dimensional non-uniform magnetic field5
On the use of a two-layer model for large-eddy simulations of supersonic boundary layers with separation5
Investigation of a nozzle guide vane cooling characteristic under one engine inoperative conditions5
Assessment of Reynolds-stress models for aeronautical applications5
Aerodynamic noise characteristics of airfoils with morphed trailing edges5
Fluid–structure–thermal interaction of a self-fluttering membrane in turbulent channel flow5
Flow features of the Ahmed body at a low Reynolds number5
Outer turbulent boundary layer similarities for different 2D surface roughnesses at matched Reynolds number5
Experimental investigation of forced flow regime transition in a dual bell nozzle by secondary fluidic injection5
Turbulent flame-wall interaction of premixed flames using Quadrature-based Moment Methods (QbMM) and tabulated chemistry: An a priori analysis5
Manipulation of ramp-induced shock using an array of surface arc plasma actuators5
Effect of spatial filter features on local heat transfer coefficients obtained from particle-resolved simulations of a flow through a fixed random array of rigid spherical particles5
Neural network-based eddy-viscosity correction for RANS simulations of flows over bi-dimensional bumps5
An improved k-ω turbu5
Secondary vortex street in the wake of a rectangular cylinder: Effects of Reynolds number, aspect ratio and free-stream perturbation5
A new perspective on skin-friction contributions in adverse-pressure-gradient turbulent boundary layers5
Velocity and concentration field measurements and large eddy simulation of a shaped film cooling hole5
Optimization of a double-intake squirrel cage fan using OpenFoam and metamodels5
High-fidelity computational study of roughness effects on high pressure turbine performance and heat transfer5
Flow dynamics in the short asymmetric Taylor-Couette cavities at low Reynolds numbers5
Active control of flow over a backward-facing step at high Reynolds numbers5
Scaling of the roughness effects in turbulent flows over systematically-varied irregular rough surfaces5
Near wall coherence in wall-bounded flows and implications for flow control5
Large-eddy simulation of turbulent non-Newtonian flows: A comparison with state-of-the-art RANS closures5
Effect of large-scale structures on bursting phenomenon in turbulent boundary layer5
Effect of pressure gradients on the different stages of roughness induced boundary layer transition5
Characteristics of a buoyant plume in a channel with cross-flow5
Two-phase co-current flow simulations using periodic boundary conditions in horizontal, 4, 10 and 90° inclined eccentric annulus, flow prediction using a modified interFoam solver and comparison with 5
Effect of endwall passage vortex generator on corner stall of a tandem compressor cascade5
0.042186975479126