Precision Engineering-Journal of the International Societies for Preci

Article	Citations
Determination of the reference point of a radio telescope using a multilateration-based coordinate measurement prototype	171
Investigating elastic recovery of monocrystalline silicon during plunging experiments with chamfered diamond tools	112
Theoretical and experimental characterization of an active ferrofluid pad bearing for nanopositioning	51
Enhancing pointing accuracy in Risley prisms through error calibration and stochastic parallel gradient descent inverse solution method	49
Development of a novel nickel-based metal force microsensor using bottom-up approach	45
Development of mathematical model and geometric error identification methods for Swiss-type automatic lathe -verification of geometric error suppression effect of guide-bush-	45
A piezoelectric load-sharing-based platform for measuring dynamic six-dimensional forces/moments of large equipment in spacecraft	43
Electrochemical polishing mechanism and process of medium-carbon steel 1144	34
Modeling and prediction of optical glass surface morphology during laser local forming	34
Optimizing processing stability with ionized polymers in magnetorheological finishing fluid	34
Comparative study on micro-milling machinability of titanium alloys prepared by different processes: Forging process, additive manufacturing process and heat-treatment process	34
Investigations on electromagnetic wave scattering simulation from rough surface: Some instructions for surface roughness measurement based on machine vison	34
Coupled hysteresis and resonance control of three-degree-of-freedom tip-tilt-piston piezoelectric stage	33
Multiaxis printing method for bent tubular structured gels in support bath for achieving high dimension and shape accuracy	33
A prediction-optimization method for surface topography-induced assembly accuracy of a precision mirror	31
An efficient method for measuring and identifying geometric and dynamic errors in dual five-axis machine tools	31
Dynamic performance analysis of ball bearings with multi-factor coupling excitation	31
Evaluating the standard uncertainty due to the voxel size in dimensional computed tomography	31
Modeling the dynamic interaction between machine tools and their foundations	30
The sub-nanometer finishing surface evolution of tungsten carbide in shear thickening polishing and the effect of the impurities	30
Frequency-domain compliance design of a vertical flat piezoelectric flexure nanopositioner	30
Analysis of arc plasma characteristics and energy distribution in EDM based on two-temperature model	30
A dynamic Timoshenko beam constraint model for use in compliant mechanisms with intermediate deformation ranges	30
Kinematic calibration of a 5-DOF hybrid machining robot using an extended Kalman filter method	29
Surface pretreatment methods for cemented carbide substrates of the coated cutting tools: A review	28

Review of ultrasonic vibration-assisted milling technology	27
Overall improvement of macro electrochemical jet milling by utilizing a novel cathode tool with an ultra narrow inter-electrode gap	27
A flexure-based and motion-decoupled XYZ nano-positioning stage with a quasi-symmetric structure	27
Investigation on the machining mechanism and surface integrity in ultrasonic elliptical vibration cutting of Al-Si alloys	27
Development of an optimized smart tool holder using symmetrical structure for three-axis cutting force measurement in diamond cutting	26
Analysis of the influence of passive joints on kinematic calibration of parallel manipulators based on complete error model	26
Global calibration of an on-machine measurement system using a chromatic confocal sensor	26
Simplifying the monoscopic deflectometric measurement by extra-facility-free workpiece positioning	25
Calendar	25
Diamond shifting cutting of hexagonal cube corner retroreflectors	25
Full-field geometric error identification for coordinated motion of linear axes with parallel dual double ball bar	25
Mechanism to suppress regenerative chatter vibration due to the effect of air-cutting and multiple regeneration during low frequency vibration cutting	25
Position-adjusted subset tracking analysis coupled with a double circle marker	25
Surface periodicity index (S24
High-accuracy roundness measurement of small cylindrical workpieces by a high-frequency filtering method	24
Stress-based optimization of assembly surface mechanical properties oriented to stress-uniform assembly	23
Electrochemistry assisted shear thickening polishing of Ti-6Al-4V	23
Study on photocatalysis/vibration-assisted finishing for deterministic polishing	23
Evaluation of a telescopic simultaneous ballbar in a 3-axis machine tool using a reference equipment	23
A self-initialized one-dimensional measuring machine for calibrating the length of a ball bar	22
Smooth motion in piezoelectric stick-slip actuators at low driving voltage enabled by an orthogonally coupled symmetric mechanism	22
Experimental research on the performance of micro-textured CVD diamond-coated abrasive tools in longitudinal-torsional ultrasonic grinding of die steel	22
Preliminary study of photomask pattern inspection by beam-shaped knife-edge interferometry	22
Block processing time-based programming for high-speed, high-precision 5-axis machining	22
Establishment and analysis of a piezoelectric actuator dynamic model with temperature-dependent damping, stiffness, and piezoelectric constant	22
A dual-joint compliant architecture for precision control in robotic neuroendoscopy	22
Enhancing tribological properties of AA6082 through EDM-induced roughness and wettability control via nanostructuring	22
An adjustable and controllable a priori design of lattice structure based on deep learning	22
“Don’t stop me now!”: Stopping rules for iterative reconstruction with dimensional X-ray Computed Tomography	21
Model-free tool path modification in ultra-precision diamond turning of freeform surfaces using iterative learning control	21
Influence of contact force and rubber wheel hardness on material removal in abrasive belt grinding investigated by physical simulator	21
Advances in surface finishing technology for wind turbine gears: A comprehensive review	21
Dynamic performance enhancement of machining center with epoxy granite base: Experiments and finite element simulations	21
Thermal error modeling and compensation based on Gaussian process regression for CNC machine tools	21
Research progress on grinding contact theory of axisymmetric aspheric optical elements	21
Scaling photogrammetry: A comparative evaluation and metrological assessment across small- and meso-scale domains	21
Novel methods based on electronic circuit and laser triangulation for cutting tool and workpiece contact detection in micromilling	20
Effect of pH on the electrochemical dissolution behavior of a (TiVCr)95W5 refractory high-entropy alloy and the machining of various structures	20
A resin gauge for performance testing of X-ray CT and its calibration by multiple orientation measurements	20
Prelim 3: Editorial Board	20
Editorial Board	19
The STAGE method for simultaneous design of the stress and geometry of flexure mechanisms	19
Dynamic vibration modeling of the ball screw feed system considering travel deviation	19
Investigation on two-dimensional ultrasonic vibration plane turning method based on elliptical plane swinging strategy along short axis	19
Editorial Board	19
Compensating varying size effect in diamond cutting of SiCp/Al by ultrasonic elliptical vibration	19
A 3-DOF spreading precision positional stage for ductile end-face fly-cutting of quartz glass	19
Performance evaluation of a novel disk-type motor using ultrasonic levitation: Modeling and experimental validation	19
Bowtie design for thermal expansion mimicry and mitigation	19
Relationship between blanking performance and microstructure of annealed Fe–Si–B–Cr amorphous alloy sheets	19

Modeling of material removal in pre-structured magnetorheological elastic polishing based on lame differential equation and its experimental validation	19
Prediction of crack initiation in single-crystal sapphire during ultra-precision machining using MD simulation-based slip/fracture activation model	19
Advanced pneumatic microgripper for versatile biomedical micromanipulation	19
Propagation characteristics of acoustic emission waves in liquid media in near-field	19
Feedback switching adaptive control for trajectory tracking in walking piezoelectric actuator	18
Experimental and simulation study of tool wear in hard turning 18CrNiMo7-6 steel	18
Effects of chemical action of polishing medium on the material removal of SiC	18
Hybrid CFD–machine learning framework for predicting material removal rates in bonnet polishing	18
High-precision alignment system for DMD-based maskless lithography in multilayer exposure applications	18
Fabrication of angle-gradient echelle grating on metallic glass using shaped vibration cutting with time-varying trajectory	18
Effects of the V-groove property for machining miniature balls using a plate with discontinuous sectors of fixed abrasives	18
High efficiency fabrication of Si microlenses by applying in-situ laser and ultrasonic vibration hybrid diamond cutting	18
A novel high resolution, fast response speed, and long-stroke hybrid flexible focusing mechanism of advanced optical imaging system driven by an ultrasonic motor	18
A two-axis Lloyd's mirror interferometer with elastically bent mirrors for fabrication of variable-line-spacing scale gratings	18
Hybrid dual-stage fast tool servo for integrated machining and measurement of optical microstructures	18
Assembly accuracy analysis of cylindrical parts based on skin model shapes considering form deviations and local surface deformations	18
Investigation on the machining mechanism of silicon modified by Au ion irradiation in elliptical vibration diamond cutting	17
Magnet-actuated loading of magnetic conductive high-viscosity droplets	17
Kinematic accuracy analysis for cam mechanism considering dynamic behavior and form deviations	17
Experimental study on in-situ laser-assisted diamond turning of single crystal germanium	17
PACS: Projection-driven with Adaptive CADs X-ray Scatter compensation for additive manufacturing inspection	17
Prelim 3: Editorial Board	17
Adaptive neural network fixed-time control of piezoelectric actuator for precision motion tracking	17
A sliding-disk method for decoupled planning of five-axis tool paths in flat and filleted end milling with uniform-scallop and uniform-strip-width constraints	17
Investigation on the effects of synergistic coupling between ultrasonic elliptical vibration and cold plasma assistance on surface integrity during precision turning of tungsten alloys	17
Damage-free and ultra-smooth chemical mechanical polishing of calcium fluoride crystal surfaces	17
Ultra-low frequency active vibration isolation in high precision equipment with electromagnetic suspension: Analysis and experiment	17
An integrated optimization method for measurement points layout and error modeling for digital twin of CNC machine tools	17
An overview of the 56-year development route of broaching technology (1968–2023)	17
Development of micro-nibbling method based on dieless punching	16
A novel low-friction pneumatic actuator optimization design method for high-precision position servo control in grinding processes	16
An irregular datum contour inverse determination method based on laser scribing for edge trimming of aircraft access covers	16
Realization of high-precision electrochemical machining by active use of hydrogen bubbles generated in non-machining area	16
Development and performance evaluation of a multi-mode piezoelectric motion platform for high-precision optical measurements	16
Optimization and test of a ring-ring typed atmospheric pressure plasma jet for optical fabrication	16
Expanding accessible 3D sample size in lab-based X-ray nanotomography without compromising resolution	16
Editorial Board	16
Speed state monitoring for ultrasonic bone cutting based on multi-signal fusion recognition of contact features	16
New framework for nanoindentation curve fitting and measurement uncertainty estimation	16
A novel data driven formulation for predicting jetting states and printing zone of high-viscosity nanosilver ink in inkjet-based 3D printing	16
Real-time monitoring of grinding wheel using a dynamic envelope model	16
Enhancing shape precision in jet electrochemical additive micro-manufacturing process through confined electrolyte	16
Chip formation mechanism in milling metallic glasses based on Drucker-Prager (D-P) constitutive model	15
Physics-informed thermo–dynamic modeling of stiffness and modal drift in preloaded single-nut ball-screw systems under multi-condition thermal loading	15
Kinematics modeling and trajectory optimization for precision grinding of variable-parameter helical grooves	15
Investigation on surface quality improvement of laser powder bed fusion-fabricated internal channels via free abrasive assisted electrochemical polishing	15
Manufacturing processes for microscale metallic hollow structures: numerical investigation and analysis	15
A magnetically actuated microgripper with functionally partitioned multi-material design for cell manipulation	15
Improving ultrasonic levitation accuracy through surface groove design: Numerical investigation and validation	15
Nanometer precision height gauge for small holes with high aspect ratio	15
Influence of forming grinding wheel wear and dressing conditions on flute profile accuracy in helical tap grinding	15
Enhancing hard parting off performance on AISI 304: A comparative study of conventional flood cooling and eco-friendly vegetable oil-based sustainable MQL	15
Deep-learning-enabled development of a high-dynamic-performance CFRP damping boring bar for chatter suppression	15
Aspheric grinding surface accuracy optimization by integrating sensitive geometric error detection and in-situ compensation processing	15
In-situ integrated ultrasonic vibration-assisted grain refinement for suppressing anisotropic diamond cutting behavior of polycrystalline Cu	15
A high performance hybrid-driven piezoelectric actuator based on asymmetrical structure with combined lateral and coupling motions	15
A novel autoencoder modeling method for intelligent assessment of bearing health based on Short-Time Fourier Transform and ensemble strategy	15
High-quality surface polishing of selective-laser-melting stainless steel by defoamed magnetorheological elastomer	15
A review of tube inner surface polishing technologies and development	15
Editorial Board	15
Dieless punching of ultrasmall-diameter holes	14
Research on composite pattern design and lapping performance of fixed abrasive pads controlled by multi-physical fields	14
Influence mechanism of electroplasticity effect on plastic deformation during electrical-assisted cutting nickel-based superalloys	14
Sensor-integrated data acquisition and machine learning implementation for process control and defect detection in wire arc-based metal additive manufacturing	14
Modeling and analysis of forces in laser-assisted micro-milling Inconel 718 under softening effects and size effects	14
Sub-arcsecond rotational angle metrology of rough surfaces using a mid-infrared femtosecond laser	14
Arc-to-sheet printer for high-precision patterning with positional errors below 6 ppm at 3σ level: Trochoidal trajectory mechanism for rotary motion of arc	14
Morphology modelling and validation in nanosecond pulsed laser ablation of metallic materials	14
Study on the wear mechanism of high-entropy alloy coated tools and grain evolution in micro-cutting of TC4 titanium alloy	14
Modeling of material removal rate for elastic-enhanced magnetorheological shear thickening polishing	14
Effects of lubrication performance on multi-roller statics characteristics of planetary roller screw mechanism with errors	14
Fast prototyping of complex-shaped fused silica micro-optics through diamond turning of silica nanocomposites	14
Hough transform guided subpixel edge regression for high precision relocalization of nut geometric parameters	14
Toolpath generation for ultraprecision machining: Freeform surface generation and extrapolation	14
Automated visual roughness evaluation of ground surface based on vertical incidence of circular structured light	14
Decoupling modeling design and high-precision position control of fast steering mirror	14
Error sources in touch-trigger probing by a planar robot arm	14
Geometrically nonlinear design of a rhombus-nested compliant amplification mechanism for use in precision actuators and sensors	14
Hybrid physics and data-driven modeling for edge control and form correction in the surface adaptive polishing of the optical surface	14
Effects of cryogenic minimum quantity lubrication on milling force and surface quality of wood-plastic composites	13

Prelim 3: Editorial Board	13
TSP-based depth-first search algorithms for enhanced path planning in laser-based directed energy	13
On-machine measurement error modeling and compensation in three-axis machine tools based on measurement error transformation matrices	13
Design of a novel Z-shaped flexure hinge and a 2DOF XY precision positioning platform	13
Straightforward fabrication of sub-10 nm nanogap electrode pairs by electron beam lithography	13
The influence of velocity slip on the dynamic and static performance of aerostatic spindles	13
Enhancing the functionalities of three-dimensional imaging LiDAR: A review	13
Editorial Board	13
Atmospheric-pressure plasma-assisted powder jet deposition for thick hydroxyapatite film formation —Effect of atmospheric-pressure plasma jet	13
Few-fringe-based phase-shifting profilometry employing hilbert transform	13
Polytopic LPV modeling and gain scheduling H	13
NURBS-based freeform surface reconstruction from sparse and unstructured contact measurement data using iterative control point optimization	13
Reflection techniques of continuous laser beam deflection — A comprehensive overview	13
Vision-based autonomous robots calibration for large-size workspace using ArUco map and single camera systems	13
Design, modeling and control of a 3 degree-of-freedom positioning system for high-precision 3D inline-metrology	13
Research on the acoustic softening effect of ultrasonic vibration-assisted cutting of nickel-based superalloys	13
Output feedback motion control with prescribed performance guarantees for hysteretic nonlinear systems and its applications	13
Impact of resin reuse on form accuracy in 3D printed microchannels and effects on hydrodynamic flow stability	13
Study on formation of exit edge defects in the milling process by using the combined theory of the energy conservation and orthogonal cutting mechanism	13
Editorial Board	12
Fabrication of high precision grating patterns with a compliant nanomanipulator-based femtosecond laser direct writing system	12
A two-beam interferometer with the tuning of the interference pattern period by simulating its rotation	12
Advances in hot embossing technology for optical glass micro-nanostructures: A review	12
Uncertainty quantification for spindle axial thermal error of CNC machine tools considering hysteresis effect	12
Editorial Board	12
Adaptive fringe projection algorithm for image saturation suppression	12
Calendar	12
Development of a stator-rotor integrated piezoelectric actuator for precise joint rotation of the robotic arm	12
Research on design and fabrication of micro ball end milling tool with flat edge and conical flank	12
Compound mechanical and chemical-mechanical polishing processing technique for single-crystal silicon carbide	12
Trajectory generation for adhesive dispensing robots by modeling of material behavior	12
Error compensation of five-axis roller machine tool for manufacturing Fresnel mold	12
Spiral tool path optimization method for fast/slow tool servo-assisted diamond turning of freeform surfaces with highly form accuracy	12
Research on precision dressing of resin-bonded arc-shaped diamond grinding wheel via tantalum metal.	12
A novel F-shaped linear guiding mechanism based compliant positioning stage with restricted parasitic motion	12
Enhanced single-crystal AlN global planarization process based on chemical mechanical polishing	12
Thermal error modeling and multi-objective optimization design to enhance the thermal stability of interferometers	11
Friction torque analysis of the lubricated planetary roller screw mechanism considering machining errors	11
Vibration suppression strategy of elliptical gears based on configuration optimization design	11
Review and prospect of precision machining of bearing rollers: Cylindrical, tapered and spherical rollers	11
Diameter measurement of nano/micro-optical fiber based on effective refractive index including uncertainty analysis with Monte Carlo simulation	11
Optimized design of generalized flexure rotational couplers	11
Temperature field responses to face gear grinding conditions based on a comprehensive force–thermal model	11
Study on the influence of milling tool inclination angle on surface quality and optimal selection in the ultra-precision diamond milling of curved surfaces	11
Separation of rotary table radial error motions in gear pitch measurements using harmonic regeneration	11
Prediction of tool wear during micro-milling Inconel 718 based on long short-term memory network	11
Lapping performance of agglomerated diamond abrasives and analysis of sapphire processing process	11
Performance evaluation of a walking-type piezoelectric actuator with compliant mechanism for wide-range speed driving and high-precision positioning	11
Reference object for traceability establishment in X-ray computed tomography measurements of fiber length in fiber-reinforced polymeric materials	11
Blade profile extraction and edge completion method based on structured light measurement point cloud	11
Generation mechanism of the surface morphology on tilted ultrasonic elliptical vibration cutting TC4 titanium alloy	11
Response of surface micro-topography of monocrystalline silicon to physical characteristics of polishing pads	11
Tool wear suppression in diamond turning NAK80 via carbon nanofluids composite cryogenic nitrogen	11
Simultaneous cutting and grinding of micropins using cylindrical microtools	11
Influence of point cloud filtering on optical inspection of additive manufactured metal parts	11
Tilt-translational analysis and enhanced LQG control with a virtual sensor fusion configuration: in application to ultra-low frequency seismic vibration isolation	11
Study of the influence of cutting speed on diamond turning machining mechanisms for NiP	11
A novel flexure hinge inspired by an oblique bending beam: Design, application and experimental evaluation	11
Phase-shifting profilometry for 3D shape measurement of moving objects on production lines	11
Modeling of the cutting front profile in abrasive water jet machining based on the energy balance approach	11
A registration-based stitching method for obtaining high-accuracy material removal distribution in the sub-aperture polishing process	10
Stroke error analysis of planetary roller screw mechanism with eccentric errors and pitch errors	10
Conformal pulse electrochemical polishing of complex valve core components	10
Position accuracy criteria for planar flexural hinges	10
The mechatronic architecture and design of the High-Dynamic Double-Crystal Monochromator for Sirius light source	10
Analysis of diffusion in Fe/4H-SiC by molecular dynamics method	10
Evaluation of force variations mechanisms during radial immersion micromilling	10
Experimental investigation of the influence of the pocket shape on the cage stability of high-precision ball bearings	10
Physics-driven precision reliability prediction modelling for the condition estimation of worm gear turntable	10
Investigation on machinability and sustainability aspects during hard turning under GO nanofluid MQL environment for precision and cleaner manufacturing	10
Modeling and analysis of specific cutting energy for Ti6Al4V alloy using quasi-intermittent vibration assisted swing cutting	10
Development of a novel self-locking-at-rest piezoelectric inchworm motor with high switching frequency driving ability	10
Slurryless electrochemical mechanical polishing of 4-inch 4H–SiC (0001) and (000–1) surfaces	10
Elucidating the influence of fibre orientation on material removal and grinding force in longitudinal torsional ultrasonic vibration-assisted grinding of SiCf/SiC composites	10
Adaptive fixturing of non-rigid workpieces for coordinate measurements	10
Enhanced efficiency and surface quality in magnetic field-assisted mass polishing via vibration assistance	10
Fluorescence based scanless areal surface texture measurement technique using lubricating oil with in-situ calibration	10
Prelim 3: Editorial Board	10
Dynamic solid-liquid mixing mechanical model of contact surfaces and experiment of M50 aviation bearing steel by using ultrasonic-assisted electrolytic in-process dressing grinding	10
Research on the gear bending fatigue full-life prediction model of considering hobbing residual stress	10
In-situ sub-aperture stitching measurement based on monoscopic phase measuring deflectometry	10
Wear mechanisms of diamond tools and their material basis in machining iron-based materials	10
A form-grinding wheel optimization method for helical gears based on a PSO-SVM model	10
An iterative pre-compensation method of tracking error considering trajectory optimization for robot contour accuracy improvement	10
Effect of contact angle in machine-support structure on vibration frequency and positioning performance	10
Effect of pad surface morphology on the surface shape of the lapped workpiece	10
Hybrid reluctance actuator topology for enhanced linearity and high torque in fast steering mirrors	10
An error compensation scheme for polar coordinate glass edging machines using the contour registration method	10
In-process high-speed X-ray imaging of the electrical discharge machining process for clarifying electrode behavior inside a metal workpiece	10