Polymer Degradation and Stability

Article	Citations
Corrigendum to ‘Synthesis of a vanillin-derived bisDOPO co-curing agent rendering epoxy thermosets simultaneously improved flame retardancy, mechanical strength and transparency’ [Polymer Degradation	269
Experimental characterization of epoxy/quartz composite material exposed to PDs	240
Editorial Board	176
Editorial Board	156
An eco-friendly PVA/XG/AP nanocomposite multifunctional shield for wood with high flame retardancy and superior thermal insulation	133
Experimental and simulation studies of the role of water on degradation of Polyetheretherketone under high pressure and high temperature conditions	127
Low temperature carbonization flame-retardant mechanism of cotton fabric catalyzed by the composite of keratin and in-situ generated calcium alginate	116
A multifunctional integrated coating reinforced with exfoliated boron nitride towards superior decorative, antibacterial, durable, and flame-retardant performances	113
Controlled architecture of polyhedral oligomeric silsesquioxane-functionalized poly(glycidyl methacrylate)/polyester composites using surface-initiated ICAR ATRP Technique for High Flame Retardancy an	100
A review of ceramizable EPDM composites: Current status and future perspectives	98
ZIF-8@Co-doped boronate ester polymer core-shell particles: Catalytically enhancing the nonflammability and smoke suppression of epoxy resin	85
Simulation of the Chalking of Silicone Rubber Based on Tetramethylammonium-Hydroxide-Catalyzed Scission Reaction	85
Thermo-oxidative aging of semi-crystalline polyimide films: Experimental characterization and predictive modeling	82
Editorial Board	79
Editorial Board	78
Editorial Board	77
Preparation and fire prevention performance analysis of MOF hydrogel from waste inspired by the natural flame-retardant properties of pineapple peel	77
New modification strategy for thermoplastic polyurethane with high hygrothermal ageing resistance and flame retardancy	75
One-pot preparation of flame-retardant waterborne polyurethane by glycolysis of PET with ionic liquids	75
A facile technique to investigate the char strength and fire retardant performance towards intumescent epoxy nanocomposites containing different synergists	74
Water-induced failure in polymer coatings: Mechanisms, impacts and mitigation strategies—A comprehensive review	72
Synthesis of two TiO2-based prodegradant additives and their efficiency in inducing the accelerated photo-oxidation of low-density polyethylene	71
Novel phosphorous-containing epoxy thermosets with improved anti-flammability, smoke suppression, and dielectric properties	70
Enhancing the performance of recyclable polyurea through coordination of rigid chain segments and graphene platelets	69
Composition-controlled degradation behavior of macroporous scaffolds from three-armed biodegradable macromers	69

Non-Arrhenius behavior: Influence of antioxidants on lifetime predictions for materials used in the cable and wire industries	69
Time domain NMR evaluation of thermal and thermochemical aging of nitrile rubber on crosslinking and mechanical properties	67
Synthesis of magnolol-derived bisphosphate for fabrication of bismaleimide resins with intrinsic anti-flammability and smoke suppression	65
Multi-functional solvent-free SiO2 nanofluid simultaneously improve major properties and fluidity of epoxy resin: A new strategy beyond nanofillers	65
Enhancing the recyclability of ELV plastic bumpers: Characterization of molecular, morphological, rheological, mechanical properties and ageing degradation	64
Construction phosphorus/nitrogen-containing flame-retardant and hydrophobic coating toward cotton fabric via layer-by-layer assembly	62
Biodegradation rate control with blends of poly(butylene succinate) and poly(butylene succinate-co-adipate)	62
Exploratory DSC investigation on the solvolytic depolymerization of PET in varied solvent systems and in the presence of model additives and contaminants	61
Flame-retardant single-component epoxy resin cured by benzimidazolyl-substituted cyclotriphosphazene: Storage stability, curing behaviors and flame retardancy	60
Synergistic effect of zinc borate and microencapsulated black phosphorus nanosheets for improved flame retardancy and smoke-suppression performance of epoxy resin	60
Mini-review on degradation mechanism of perfluorosulfonic acid membranes induced by carboxylic end-groups	60
Insights into the effect of different macromolecular architectures on the charring ability of polyethylene	60
Adhesion behaviors and kinetics at silicone foam/metal interfaces	59
Biodegradability of oxidized films of polyhydroxyalkanoate copolymers containing 2-hydroxy-4-methylthiobutyrate unit in seawater	58
Durable flame-retardant cotton fabrics with tannic acid complexed by various metal ions	57
Catalyst-free sustainable epoxy vitrimers with fire safety offered by phosphorus-containing compounds	57
A novel phosphorus/nitrogen-containing polyacrylonitrile fiber with excellent flame retardancy and mechanical properties	57
Assessing the effect of minimally invasive lipid extraction on parchment integrity by artificial ageing and integrated analytical techniques	57
A UV-curable coating constructed from bio-based phytic acid, D-sorbitol and glycine for flame retardant modification of rigid polyurethane foam	57
In situ nanofibrillar fully-biobased poly (lactic acid)/poly (ethylene 2,5-furandicarboxylate) composites with promoted crystallization kinetics, mechanical properties, and heat resistance	56
Effect of the crystal orientation on the enzymatic degradation rate of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH) fibers	55
Fabrication of NiO and TiO2 supported nano calcium carbonate and its effect on the flame retardancy and thermal stability of epoxy resin composites	55
Wear behavior of UHMWPE composites under oxidative effect	55
The development of a new type of sustainable flame retarded polyamide 6 (PA6)-based composites, modified with biocarbon/phosphorus flame retardant/basalt fiber system (BC/OP/BF). The evaluation of the	53
Dynamic imine bonds enable closed-loop recycling of high performance PEEK/CF composites	52
High-strength and debondable UV-curable adhesive based on dual-dynamic network	52
Simultaneously-enhanced flame retardancy, mechanical property and acid/alkali corrosion resistance of ethylene vinyl acetate/aluminum trihydrate composite induced by crosslinking and microencapsulated	52
Effect of γ irradiation on the properties of functionalized carbon-doped boron nitride reinforced epoxy resin composite	52
Systematic study of the condensed phase of phosphorus-based flame retarded foams	50
Mechanically robust and flame-retarded EPDM composites with high loading of Mg(OH)2 based on reversible crosslinking network from Diels-Alder reactions	50
Investigation on the heat resistance mechanism of phosphate containing formulations using the pyrolysis GC-MS system	50
Biobased super engineering plastic nanocomposite of cellulose nanofibers and isosorbide	50
Flame retardant behavior of bio-based epoxy resin bearing pyridazinone and dynamic ester bond via self-blow-out and vesicular carbon formation	50
Recycling of personal protective equipment: Sanitisation, degradation and polymer blend formulations	49
Isolation and characterization of high-HHx PHA degrading bacterium from mangrove ecosystem using an improved PHA-agar plate assay	48
Char Structure and Charring Mechanism of Phosphazene-Based Epoxy Resin during Combustion	47
Epoxy-based reflective adhesive for lamination of single-sided metallized film over glass fabric destined for its use as reflective layer in fire proximity clothing	47
Deeper insights into flame retardancy of polymers by interpretable, quantifiable, yet accurate machine-learning model	47
PEEK composite resin with enhanced intumescent flame retardancy loaded with Octaphenylsilsesquioxane and nano calcium carbonate and its application in fibers	47
Study of peptide bonding under ionizing radiation in solid condensed phase under an inert atmosphere: Gas emission and radiation-induced macromolecular defects in beta-sheet-rich polyglycine	46
The pyrolysis of polyvinyl chloride: Kinetic study and product evolution	46
Flame-retardation of thermoplastic polyesters via cyclotetramerization from phthalonitrile to phthalocyanine: Pyrolysis processes and fire behaviour	44
Computational study of synthetic and natural polymer additives — Antioxidant potential of BHA, TBHQ, BHT, and curcumin	44
Cyclization of L-(-)-arabitol as a cyclic building block in poly(butylene succinate) copolymer	44
Conjugated microporous polymer nanoparticle hollow spheres loaded with DOPO and chitosan with excellent thermal insulation and flame retardant properties	43
Analysis of liquid products and mechanism of thermal/catalytic pyrolysis of polypropylene	43
Organic copper phosphate-decorated layered double hydroxide to enhance the flame retardancy and smoke suppression of epoxy resin	43
Study of UV ageing effects in modern artists’ paints with MeV-SIMS	43
Robust water diffusion modeling in a structural polymer joint based on experimental X-ray tomographic data at the micrometer scale	42
A bio-based flame retardant coating for improving flame retardancy and anti-dripping performance of polyamide 6 fabric	42

Preparation and properties of highly efficient flame-retardant Lyocell fabrics: Mitigating the acidity effect of phytic acid on the mechanical properties under pad-dry-curing process finishing conditi	42
Flame retardancy performance and mechanism of polyvinyl alcohol films grafted amino acid ionic liquids with high transparency and excellent flexibility	41
Novel insights into the correlation composition-structure-property of recyclable carbon fiber reinforced thermosetting resin composites	41
Biomass-derived polyelectrolyte fire retardant: Synergistic phosphorus-nitrogen doping for enhanced epoxy resin flame retardancy and smoke suppression	41
Restabilization – 30 years of research for quality improvement of recycled plastics review	41
Improvement of UV aging resistance of PBAT composites with silica-immobilized UV absorber prepared by a facile method	41
Editorial Board	40
Highly efficient multifunctional mono-component flame retardants comprising of sulfenamide and phosphate moieties for polypropylene	40
Editorial Board	40
Degradation of polypropylene random copolymer in aqueous solution of chlorine dioxide: Effect of crystalline structure and morphology	40
Thermal and flame retardant properties of recyclable disulfide based epoxy vitrimers	40
Corrigendum to ‘Influence of water ageing on the mechanical properties of flax/PLA non-woven composites’ [Polymer Degradation and Stability 200 (2022) 109957]	40
Editorial Board	40
Editorial Board	40
Synergistic design of polynorbornene-based membranes via hydrogen bonding, acid-base interactions and hydrophilic groups for high performance vanadium batteries	39
Thermal stability and physical properties of poly(alkyl fumarate)s with Bornyl and Isobornyl groups as the geometrically isomeric esters	39
Forecasting the hydrolysis of poly(butylene succinate) depending on molecular mass and temperature in soil and aquatic systems validated on the example of a football hybrid turf	39
Thermal ageing of PP-EPDM thermoplastic vulcanizate: Multiscale study and kinetic modeling	39
TG-FTIR-QMS analysis of more environmentally friendly poly(geranyl methacrylate)-co-poly(cyclohexyl methacrylate) copolymers	39
Continuous cultivation of defined mixed bacterial cultures for upcycling polyurethane and polyethylene terephthalate monomers to polyhydroxyalkanoates	38
Dual-crosslinked starch/carboxymethyl cellulose blend film with ion-responsive dissolution properties	38
Effect of an unsaturated-chain extender on the response of epoxy resins to radiation post-curing	38
From frameworks to firewalls: metal-organic frameworks as smart additives for flame-retardant polymers	38
Eugenol-derived trifunctional epoxy resin: Intrinsic phosphorus-free flame retardancy and mechanical reinforcement for sustainable polymer alternatives	38
Poly(glycolic acid) materials with melt reaction/processing temperature window and superior performance synthesized via melt polycondensation	38
Preparation of 4-formylphenylboronic modified chitosan and its effects on the flame retardancy of poly(lactic acid)	38
Sustainable biocomposites based on Mater-Bi and grape pomace for a circular economy: Performance evaluation and degradation in soil	37
In-depth analysis of potassium peroxysulfate based oxidation of wool fibre by advanced infrared spectroscopy	37
Biodegradability of bacterial cellulose polymer below the soil and its effects on soil bacteria diversity	37
Experimental and computational study of polystyrene sulfonate breakdown by a Fenton reaction	37
Heritage PVC objects: Understanding the diffusion-evaporation of plasticizers	37
Enhancing flame retardancy of ethylene-vinyl acetate composites via non-covalent functionalization of black phosphorus nanosheets	37
Use of seawater to improve the static strength and fatigue life of bonded coated steel joints	37
Development of a DOPO-based flame retardant with pendant chains for enhanced polyurethane elastomers	36
Flame retardant properties of Viscose/Carrageenan fibers blend papers	36
Preparation of novel flame retardant, smoke suppression and toxicity reduced PAN composite fiber based on biomass phosphononitrile derivative with Cu2+	36
Super-toughed polylactide/poly (butylene adipate-co-terephthalate) blends in-situ compatibilized by poly (glycidyl methacrylate) with different molecular weight	36
The effect of combined atmospheric plasma/UV treatments on improving the durability of organophosphorus flame retardants applied to polyester fabrics	36
High flame retardant and heat-resistance, low dielectric benzoxazine resin with phthalimide structure	36
Corrigendum to ’Recent advances in flame retardant epoxy systems containing non-reactive DOPO based phosphorus additives’ [Polymer Degradation and Stability Volume 200, June 2022, 109962]	35
New insights into solid state phosphorylation of cellulose for the development of bio-based flame retardant	35
Thermal degradation behavior of maleimide-methacrylate copolymers bearing pendant allyl groups	35
Facile synthesis of acryloxy polyhedral oligomeric silsesquioxane (AC-POSS) for simultaneous improvement of flame retardancy and transparency in vinyl ester resins	35
Investigation of abiotic degradation of tire cryogrinds	35
Pyrolysis mechanism and recycling strategy of end-of-life photovoltaic modules based on the experiment and the density functional theory	35
High-performance biobased vinyl ester resin and its fiberglass-reinforced composite with high glass transition temperature (Tg), excellent flame retardancy and mechanical properties	35
Controlled modification of polyvinylidene fluoride as a way for carbyne synthesis	34
Enhancing radiation resistance of silicone rubber through the addition of polydopamine-modified cerium dioxide	34
Universal circulating impregnation method for the fabrication of durable flame-retardant plywood with low hygroscopicity and leaching resistance	34
Aminosilane-driven crosslinked network construction for improved thermal stability of cellulose-based insulation pressboard	34
Polymer-type flame retardants based on a DOPO derivative for improving the flame retardancy of polyamide 6: Preparation, properties and flame retardancy mode of action	33
The role of NaOH in the hydrothermal dehydrochlorination of polyvinyl chloride	33
Characterization of the abiotic degradation of oxo-biodegradable polypropylene obtained from transition metal-free pro-oxidant	33
Thermal degradation behavior of 10-(2,5-dihydroxyphenyl)-9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide modified epoxy resin with liquid oxygen compatibility	33
Facile synthesis of soybean protein-based phosphorus-nitrogen flame retardant for poly(lactic acid)	33
B2O3-reinforced ablative materials with superior and comprehensive ablation resistance used in aerospace propulsion thermal protection systems	33
Thermal-aging constitutive model for a silicone rubber foam under compression	33
Thermal degradation of polylactic acid (PLA)/polyhydroxybutyrate (PHB) blends: A systematic review	33
Synthesis of a charring agent containing triazine and benzene groups and its intumescent flame retardant performance for polypropylene	33
A fully bio-based intumescent flame retardant for enhancing the flame retardancy and smoke suppression properties of wood flour polypropylene composites	33
Arc-shaped air layer bioinspired by ginkgo nut to resist high humidity environment for PET fabrics	32
Bio-inspired one-dimensional based textile fabric coating for integrating high flame retardancy, antibacterial, toxic gases suppression, antiviral and reinforcement properties	32
Embedding matrices to extend the shelf life of reference materials 1: Cellulose acetate butyrate	32
Hydroxyl radical-initialized polymerization and degradation of N-vinylpyrrolidone in lipid and aqueous environments	32
Degradation of thermoplastic polymers for fused filament fabrication under (S)TEM electron beam irradiation	32
End-of-life climate impacts of polyhydroxyalkanoates in the United States: the role of feedstock variability and temporal dynamics - a systematic review	32
Co Hybrids modified piperazine pyrophosphate towards efficient flame retardancy, smoke suppression, and high mechanical properties of styrenic thermoplastic elastomer	32
Preparation of flame retardant and antibacterial polyacrylonitrile composites based on modified microcrystalline cellulose loaded silver nanoparticles	32
Polyelectrolyte as highly efficient flame retardant to epoxy: Synthesis, characterization and mechanism	32
Novel aromatic phosphonates as flame retardants for polybutylene succinate	32
Synthesis of a novel bis(diphenylphosphinyl)-containing pyromellitimide and its application in epoxy resins	32
Facile synthesis of fluorine-containing hyperbranched polyborosiloxane, with high-temperature stability and non-traditional luminescence	32
Enhancing the coating durability and electrical stability of fiber composites with SPEEK/PEDOT:PSS permanent coatings: A novel approach	32
Recent progress in aging studies of a eutectic mixture of bis(2,2-dinitropropyl) acetal and formal nitroplasticizer	32
Clustered aluminum alkylphosphinate composite flame retardant system enhancing mechanism of fire safety in styrene-butadiene copolymer	32
Biodegradability of commercially available cellulose-PLA based compostable food trays – Influence of usage and UV aging	32
Towards sustainability by integrated microbial degradation and closed-loop biological recycling of the copolymer poly (3-hydroxybutyrate-co-3-hydroxyvalerate) by Azohydromonas australica DSM 1124	31
Multilayer biodegradable films with a degradation initiation function triggered by weakly alkaline seawater	31
Synergistic flame retardant strategies in polymers: A review of metal-organic frameworks and inorganic particles with multi-mechanism insights	31
In situ EPR investigation of sulfur vulcanization mechanism and ageing process	31

Thermal oxidation of blends of polypropylene and polyamide 6/66. Effect of inhibition	31
Effect of nanoparticles and siloxane groups on the atomic oxygen erosion resistance of copolyimides	31
The reaction mechanism and sulfur evolution during vulcanized nature rubber pyrolysis in the atmosphere of H2O: A ReaxFF molecular dynamics study	31
Cactus-like structure of BP@MoS2 hybrids: An effective mechanical reinforcement and flame retardant additive for waterborne polyurethane	31
The role of diffusion in the hydrolytic degradation of poly(lactic-co-glycolic acid): A molecular perspective	31
Lifetime prediction of thermo-oxidative degradation of a modified epoxy resin and its glass fiber composite in air atmosphere and correlation with long-term aging behavior	31
Self-catalytic bio-based benzoxazine-phthalonitrile thermosets with high heat resistance and flame retardancy	31
Synergistic flame retardant coatings for carbon fibre-reinforced polyamide 6 composites based on expandable graphite, red phosphorus, and magnesium oxide	31
Atomic insights into mechanisms of thermal stability enhancement of cured boron-silicon modified phenolic resin	31
Zinc oxide nanoparticles and sage (Salvia officinalis) essential oil as active components of alginate films for food packaging	31
Engineering mycelium fungi into an effective char-forming thermal protection material via alkaline deacetylation	30
Plant-derived p-hydroxyphenylacrylic acid-derived epoxy resins exhibit excellent flame retardancy, hydrophobicity, degradability, and low dielectric loss after curing with bio-based fluorinated Schiff	30
Machine learning framework to predict instantaneous heat release rate of polymer nanocomposites in cone calorimetry	30
Synthesis phosphorus–sulfur reactive flame retardant for polyamide 66 with high flame retardant efficiency and low smoke	30
Improved shape stability and ceramifiable properties of ceramifiable polyethylene composites by crystallization reaction	30
Regulating the Thermal Behavior of Nitrocellulose by Stable Incorporation of a Green Supramolecular Salt	30
Microstructural evolution of cross-linked polytetrafluoroethylene under gamma irradiation using ultra-small angle X-ray scattering	30
Improving the flame retardancy and smoke suppression of ethylene vinyl acetate composites by introducing the hybrid material of Zn/TiO2@AKaol	30
Influence of humidity on the decomposition process of double base rocket propellant	30
Polystyrene containing 2-[3-(2H-benzotriazol-2-yl)-4-hydroxyphenyl]ethyl methacrylate with Low Molecular Weight Used As Macroadditive Photostabilizer	30
In-situ generated SiO2 nanoparticles for heat release reduction and smoke suppression in unsaturated polyester composites	30
Group aggregation effect of polyphenolic phosphaphenanthrene macromolecule on enhancing fire safety and toughness of epoxy thermoset	30
A biphosphophenanthrene structure intumescent flame retardant with superior smoke suppression performance for epoxy resin	29
Thermal oxidative aging behavior and lifetime prediction of fluoroether rubber	29
Thermomechanical response of thermoplastic polyurethane used in MEX additive manufacturing over repetitive mechanical recycling courses	29
Structure and properties of a flame retardant ternary vitrimer regulated by cyclic and long-chain dicarboxylic acids	29
Construction of a sustainable, reactive and phytate-based intumescent flame-retardant for silk textile	29
Surface modification of carbon dots by boron and phosphorus to construct flame-retardant epoxy resin with high mechanical and low dielectric properties	28
Property evolution and molecular mechanisms of aluminized colorless transparent polyimide under space ultraviolet irradiation	28
Giovanni Camino (1941 - 2024)	28
Biodegradability of renewable isosorbide and sebacate-based copolyesters	28
Effects of recycling and hygrothermal environment on mechanical properties of thermoplastic composites	28
No business as usual: The effect of smoke suppressants commonly used in the flame retardant PA6.6 on smoke and fire properties	28
Editorial Board	28
Mechanically robust, thermally conductive and flame retardant polydimethylsiloxane composites decorated with a nitrogen/phosphorus-functionalized carbon nanotubes-montmorillonite interconnected networ	28
The construction of super-tough polylactide/crosslinked polyamide blends by dynamic vulcanization	28
Fabrication of thin-walled flame-retardant recycled polyethylene composites: synergistic flame retardancy of muscovite in APP/MCA systems	28
Simultaneously boosting the flame retardancy and degradability of poly(lactic acid) composite by phosvitin affiliation	28
Early fluorescence tracking of induced degradation pathways on PLA: Deciphering the dominant synergistic effects of water and oxygen at 40 °C	28
Biodegradable and water-soluble polymers in block copolymer architectures	28
Biodegradation of pre-treated low-density polyethylene (LDPE) by Yarrowia lipolytica determined by oxidation and molecular weight reduction	28
Optimization strategies for the mechanical properties of anion exchange membranes applied in new energy devices	27
Inspired by the shell of an armadillo-black phosphorus nanosheets weared Ar plasma protective clothing to enhance the fire safety of epoxy resin	27
Mechanism underlying the accelerated hydrolysis of poly(lactic acid) by hydrochloric acid or ethanol	27
The synthesis and properties of an intumescent zinc-chelated organometallic flame retardant	27
Fabrication of talc reinforced transparent fire-retardant coating towards excellent fire protection, antibacterial, mechanical and anti-ageing properties	27
Evolution of crosslinking structure in vulcanized natural rubber during thermal aging in the presence of a constant compressive stress	27
Polyphenylene sulfide for high-rate composite manufacturing: Impacts of processing parameters on chain architecture, rheology, and crystallinity	27
Comparison of the stabilization efficiency of a conventional antioxidant, biobased alternatives derived from wine by-products, and their extracts in poly(butylene succinate) (PBS) and poly(lactic acid	27
Thermal decomposition mechanisms of phosphorus flame retardants: A combined theoretical and experimental approach	27
Biomass-derived poly(lactic acid) and poly(3-methyl-1,5-pentanediol sebacate) alternating multiblock copolymers with improved marine biodegradability and mechanical properties	27
Robust charring construction of thermoplastic polyurethane: Cyclotriphosphazene structure bearing alkynyl and its impacts on thermal degradation, burning behavior and toughness	26
Fireproofing flammable composites using mycelium: Investigating the effect of deacetylation on the thermal stability and fire reaction properties of mycelium	26
Enhancing PANox fiber properties through controlled oxidation and tensioning: A study on shrinkage inhibition and structural analysis	26
Preparation of eugenol-based flame retardant epoxy resin with an ultrahigh glass transition temperature via a dual-curing mechanism	26
Pyrolysis mechanism of spent LIBs separator and catalytic effect of metal foils: Insights from combined experimental and DFT studies	26
The extensional rheology of biodegradable polymers determines their propensity to be film blown	26
Alginic acid derivatives/DOPO modified epoxy resins: Excellent flame retardancy, mechanical properties, chemical resistance	26
Membrane and membrane-integrated processes for nanoplastics removal and remediation	26
Photodegradation behavior of polyethylene terephthalate analyzed by MALDI-TOFMS and ATR-FTIR microscopic analysis in combination with two-trace two-dimensional (2T2D) correlation mapping	26
Time-dependant degradation of highly cross-linked epoxy due to hygrothermal ageing at three different temperatures	25
Surface degradation of epoxy resin exposed to corona discharge under bipolar square wave field: From phenomenon to the insights	25
Physical properties and chemical structure evolution mechanism of AMPS-based copolymer oil well cement retarder in ultra-high temperature alkaline solution environment	25
A high-performance flame retardant liquid synthesized on the basis of DOPO hydrolysis products avoids the defects of DOPO	25
A P/N/S containing flame retardant for epoxy resins with excellent optical, mechanical and flame retardant properties	25
Characterization of accelerated hydrolysis degradation of poly (lactic acid) in phosphate buffered saline solution	25
Phytic acid-Fe chelate cold-pressed self-forming high-strength polyurethane/marigold straw composite with flame retardance and smoke suppression	24
New insight into degradation mechanisms of conductive and thermally resistant polyaniline films	24
Microwave-Assisted oxidative degradation of poly(vinylidene fluoride-tetrafluoroethylene-hexafluoropropylene): Preparation, characterization, and reaction mechanism	24
Multi-Mechanism Biomass-Derived Poly(tannic acid)-Based Antioxidant (PTRB) for Enhanced the Thermo-Oxidative Resistance of NBR: Insights from Experiments and Molecular Simulations	24
Construction of a binary architecture of flower-like nickel phyllosilicate@zinc sulfide towards the robust, wear-resistant and thermal-stable epoxy nanocomposites	24
Preparation and property analysis of chemically regenerated polyethylene terephthalate with improved chromaticity	24
Structure and stable isotope ratios of ancient and artificially aged silk fabrics	24
Catalyst-free reprocessable, degradable and intrinsically flame-retardant epoxy vitrimer for carbon fiber reinforced composites	24
Cobalt ions loaded polydopamine nanospheres to construct ammonium polyphosphate for the improvement of flame retardancy of thermoplastic polyurethane elastomer	24
Enhanced thermo-oxidative aging properties of CFRP composites by construction of heat resistance interface and interphase through waterborne polyamic acid sizing	24
High strength and mildly closed-loop recoverable epoxy vitrimer with dual reversible dynamic bonds	24
Corrigendum to 'A phosphorus/silicon-based, hyperbranched polymer for high-performance, fire-safe, transparent epoxy resins' [Polymer Degradation and Stability, 203 (2022) 110065]	24
Fire protection of wood with an environmentally benign UV-cured polyelectrolyte complex	24
Fabrication of low-density poly(lactic acid) microcellular foam by self-assembly crystallization nucleating agent	24
Molecular dynamics between amorphous and crystalline phases of e-beam irradiated piezoelectric PVDF thin films employing solid-state NMR spectroscopy	24
Metathetic degradation of waste vulcanized emulsion type butadiene-based rubber	24
A highly efficient intumescent polybutylene succinate: Flame retardancy and mechanistic aspects	24
N2O deconstruction of polycyclooctene to generate carbonyl-functionalized macromonomers	24
Corrigendum to “Unveiling deep-sea biodegradation of microbially produced lactate-based polyester (LAHB) via plastisphere metagenomics and metatranscriptomics” [Polymer Degradation and Stability 240 (	24
High toughness, UV & blue light shielding and antibacterial bio-based PEF/TiO2 nanowires composites for packaging application	24
Enhanced flame retardancy and smoke suppression of thermoplastic polyurethane membrane via “two-phase” synergistic effect	24
Remarkable effects of silicone rubber on flame retardant property of high-density polyethylene/magnesium hydroxide composites	23
Surface modification of nitrocellulose by interfacial self-assembly of metal-phenolic network for enhanced thermal stability and eco-friendly propulsion energy	23
Ion – complexed chitosan formulations as effective fire-retardant coatings for wood substrates	23
A highly flame-retardant, agile fire-alarming and ultrasensitive cotton fabric-based piezoresistive sensor for intelligent fire system	23
A hyperbranched P/N/B/Si-containing multi-element flame retardant for high performance and fire safety epoxy thermosets	23
Melt-state degradation mechanism of poly (ether ketone ketone): the role of branching on crystallization and rheological behavior	23
Multiscale hierarchical pore structure evolution in γ-irradiated PAN fibers: Synergistic insights from synchrotron radiation Nano-CT and molecular simulations	23
Phosphorus/boron-containing, flame-retardant polyurethane elastomers with great mechanical, shape-memory, and recycling performances	23