Dental Materials

Article	Citations
3D printing restorative materials using a stereolithographic technique: a systematic review	146
Nanotechnology in dentistry: Present and future perspectives on dental nanomaterials	131
Race to invade: Understanding soft tissue integration at the transmucosal region of titanium dental implants	101
Grasping the Lithium hype: Insights into modern dental Lithium Silicate glass-ceramics	73
Effect of post-curing light exposure time on the physico–mechanical properties and cytotoxicity of 3D-printed denture base material	70
Five-year clinical evaluation of a universal adhesive: A randomized double-blind trial	69
Development of 3D printed resin reinforced with modified ZrO2 nanoparticles for long-term provisional dental restorations	68
Clinical efficacy of resin-based direct posterior restorations and glass-ionomer restorations – An updated meta-analysis of clinical outcome parameters	65
Optical behavior of one-shaded resin-based composites	65
The use of bioactive glass (BAG) in dental composites: A critical review	62
Evaluation of translucency, Marten’s hardness, biaxial flexural strength and fracture toughness of 3Y-TZP, 4Y-TZP and 5Y-TZP materials	55
Longevity of composite restorations is definitely not only about materials	55
Clinical performance of posterior resin composite restorations after up to 33 years	50
A review on Vat Photopolymerization 3D-printing processes for dental application	49
Effect of post-rinsing time on the mechanical strength and cytotoxicity of a 3D printed orthodontic splint material	47
Is the presence of 10-MDP associated to higher bonding performance for self-etching adhesive systems? A meta-analysis of in vitro studies	45
Flexural strength and translucency characterization of aesthetic monolithic zirconia and relevance to clinical indications: A systematic review	45
Sol-gel bioactive glass containing biomaterials for restorative dentistry: A review	44
Novel core–shell CHX/ACP nanoparticles effectively improve the mechanical, antibacterial and remineralized properties of the dental resin composite	43
The effects of three cold plasma treatments on the osteogenic activity and antibacterial property of PEEK	42
Elution behavior of a 3D-printed, milled and conventional resin-based occlusal splint material	41
Mechanical properties–translucency–microstructure relationships in commercial monolayer and multilayer monolithic zirconia ceramics	41
Innovative surfaces and alloys for dental implants: What about biointerface-safety concerns?	40
Hybrid chitosan/gelatin/nanohydroxyapatite scaffolds promote odontogenic differentiation of dental pulp stem cells and in vitro biomineralization	38
Polymerization shrinkage and shrinkage stress development in ultra-rapid photo-polymerized bulk fill resin composites	37

Antibacterial response of oral microcosm biofilm to nano-zinc oxide in adhesive resin	37
Viscosity and stickiness of dental resin composites at elevated temperatures	37
Assessing the physical and mechanical properties of 3D printed acrylic material for denture base application	36
The impact of different low-pressure plasma types on the physical, chemical and biological surface properties of PEEK	35
Morphology and mechanical performance of dental crown designed by 3D-DCGAN	35
Initial biocompatibility of novel resins for 3D printed fixed dental prostheses	35
Is clinical behavior of composite restorations placed in non-carious cervical lesions influenced by the application mode of universal adhesives? A systematic review and meta-analysis	35
The role of cortical zone level and prosthetic platform angle in dental implant mechanical response: A 3D finite element analysis	35
Minimal tooth preparation for posterior monolithic ceramic crowns: Effect on the mechanical behavior, reliability and translucency	34
Photopolymerization shrinkage-stress reduction in polymer-based dental restoratives by surface modification of fillers	34
Robot technology in dentistry, part two of a systematic review: an overview of initiatives	34
Influence of high-speed sintering protocols on translucency, mechanical properties, microstructure, crystallography, and low-temperature degradation of highly translucent zirconia	33
Cytotoxicity and antimicrobial efficiency of ZrO2 nanoparticles reinforced 3D printed resins	33
Physicochemical, biological, and antibacterial evaluation of tricalcium silicate-based reparative cements with different radiopacifiers	33
Color alterations, flexural strength, and microhardness of 3D printed resins for fixed provisional restoration using different post-curing times	31
Wear behavior and microstructural characterization of translucent multilayer zirconia	31
Polymers for conventional, subtractive, and additive manufacturing of occlusal devices differ in hardness and flexural properties but not in wear resistance	30
Bio-mechanical characterization of a CAD/CAM PMMA resin for digital removable prostheses	30
Fatigue behavior of endodontically treated premolars restored with different fiber-reinforced designs	30
Bisphenol A as degradation product of monomers used in resin-based dental materials	29
3D printing and milling accuracy influence full-contour zirconia crown adaptation	29
Influence of bone formation by composite scaffolds with different proportions of hydroxyapatite and collagen	29
Accuracy of additively manufactured zirconia four-unit fixed dental prostheses fabricated by stereolithography, digital light processing and material jetting compared with subtractive manufacturing	29
Persistent inhibition of Candida albicans biofilm and hyphae growth on titanium by graphene nanocoating	28
Robot technology in dentistry, part one of a systematic review: literature characteristics	28
Monomer release from surgical guide resins manufactured with different 3D printing devices	28
Characterization of silver diamine fluoride cytotoxicity using microfluidic tooth-on-a-chip and gingival equivalents	28
Occlusal stress distribution and remaining crack propagation of a cracked tooth treated with different materials and designs: 3D finite element analysis	28
Tailoring the biologic responses of 3D printed PEEK medical implants by plasma functionalization	28
Three-dimensional printing of clinical scale and personalized calcium phosphate scaffolds for alveolar bone reconstruction	27
The influence of selective enamel etch and self-etch mode of universal adhesives’ application on clinical behavior of composite restorations placed on non-carious cervical lesions: A systematic review	27
Randomized controlled trial on the performance of direct and indirect composite restorations in patients with severe tooth wear	27
Degree of conversion and in vitro temperature rise of pulp chamber during polymerization of flowable and sculptable conventional, bulk-fill and short-fibre reinforced resin composites	26
Ultra-translucent zirconia processing and aging effect on microstructural, optical, and mechanical properties	26
Influence of curing modes on conversion and shrinkage of dual-cure resin-cements	26
Evaluation of the interaction of chlorhexidine and MDP and its effects on the durability of dentin bonding	25
Biomimetic remineralization of artificial caries dentin lesion using Ca/P-PILP	25
The influence of laser frequency and groove distance on cell adhesion, cell viability, and antibacterial characteristics of Ti-6Al-4V dental implants treated by modern fiber engraving laser	25
A novel CAD/CAM resin composite block with high mechanical properties	25
Strength characterization and lifetime prediction of dental ceramic materials	24
Influence of curing modes on monomer elution, sorption and solubility of dual-cure resin-cements	24
Wear of bulk-fill resin composites	24
Color matching ability of resin composites incorporating supra-nano spherical filler producing structural color	24
Reduction in anisotropic response of corrosion properties of selective laser melted Co–Cr–Mo alloys by post-heat treatment	24
Inert to bioactive – A multidimensional spectrum	23
Novel design of additive manufactured hollow porous implants	23
The effects of sequential and continuous chelation on dentin	23
Bond strength of conventional, subtractive, and additive manufactured denture bases to soft and hard relining materials	23
New bulk-fill composite system with high irradiance light polymerization: Integrity and degree of conversion	23
In vivo aging of zirconia dental ceramics – Part I: Biomedical grade 3Y-TZP	23

Digital image correlation in dental materials and related research: A review	22
Mechanical degradation of contemporary CAD/CAM resin composite materials after water ageing	22
Development of 3D printed dental resin nanocomposite with graphene nanoplatelets enhanced mechanical properties and induced drug-free antimicrobial activity	22
Strength and reliability of zirconia fabricated by additive manufacturing technology	22
Finite element analysis in implant dentistry: State of the art and future directions	22
Fluoride bioactive glass paste improves bond durability and remineralizes tooth structure prior to adhesive restoration	22
Fatigue resistance of simplified CAD–CAM restorations: Foundation material and ceramic thickness effects on the fatigue behavior of partially- and fully-stabilized zirconia	22
Effect of the addition of functionalized TiO2 nanotubes and nanoparticles on properties of experimental resin composites	22
Reliability and aging behavior of three different zirconia grades used for monolithic four-unit fixed dental prostheses	22
Intraoral low-temperature degradation of monolithic zirconia dental prostheses: Results of a prospective clinical study with ex vivo monitoring	21
Boron nitride nanosheets modified with zinc oxide nanoparticles as novel fillers of dental resin composite	21
Development of new diacrylate monomers as substitutes for Bis-GMA and UDMA	21
Raman spectroscopy for early detection and monitoring of dentin demineralization	21
Corrosion properties of low carbon CoCrMo and additively manufactured CoCr alloys for dental applications	21
Photodynamic inactivation of Streptococcus mutans by curcumin in combination with EDTA	21
Influence of curing modes on thermal stability, hardness development and network integrity of dual-cure resin cements	21
Electrophoretic deposition of novel semi-permeable coatings on 3D-printed Ti-Nb alloy meshes for guided alveolar bone regeneration	21
Laboratory methods to simulate the mechanical degradation of resin composite restorations	21
Cobalt–chromium alloys fabricated with four different techniques: Ion release, toxicity of released elements and surface roughness	21
Fractography of clinical failures of indirect resin composite endocrown and overlay restorations	20
Effect of exposure time and moving the curing light on the degree of conversion and Knoop microhardness of light-cured resin cements	20
Biomimetic in situ precipitation of calcium phosphate containing silver nanoparticles on zirconia ceramic materials for surface functionalization in terms of antimicrobial and osteoconductive properti	20
A novel anticaries agent, honokiol-loaded poly(amido amine) dendrimer, for simultaneous long-term antibacterial treatment and remineralization of demineralized enamel	20
High refractive index monofunctional monomers as promising diluents for dental composites	20
Effect of an ethanol cross-linker on universal adhesive	20
Multiparameter evaluation of acrylamide HEMA alternative monomers in 2-step adhesives	19
The roles of 10-methacryloyloxydecyl dihydrogen phosphate and its calcium salt in preserving the adhesive–dentin hybrid layer	19
Fast and cost-effective screening for SARS-CoV-2 variants in a routine diagnostic setting	19
Unveiling structure–activity relationships of proanthocyanidins with dentin collagen	19
Antimicrobial effect of nanostructured membranes for guided tissue regeneration: an in vitro study	19
Influence of microcapsule parameters and initiator concentration on the self-healing capacity of resin-based dental composites	19
Remineralising fluorine containing bioactive glass composites	19
Accuracy of metal 3D printed frameworks for removable partial dentures evaluated by digital superimposition	19
The influence of printing angle on color and translucency of 3D printed resins for dental restorations	19
Particle release from dental implants immediately after placement – An ex vivo comparison of different implant systems	19
Titanium dioxide nanotubes with triazine-methacrylate monomer to improve physicochemical and biological properties of adhesives	19
Antimicrobial and physicochemical characterization of endodontic sealers after exposure to chlorhexidine digluconate	19
Niobium silicate particles as bioactive fillers for composite resins	18
Biaxial flexural strength of zirconia: A round robin test with 12 laboratories	18
Rinsing postprocessing procedure of a 3D-printed orthodontic appliance material: Impact of alternative post-rinsing solutions on the roughness, flexural strength and cytotoxicity	18
Microstructural, mechanical, and optical characterization of an experimental aging-resistant zirconia-toughened alumina (ZTA) composite	18
Size-controllable synthesis of dendritic porous silica as reinforcing fillers for dental composites	18
New perspective to improve dentin–adhesive interface stability by using dimethyl sulfoxide wet-bonding and epigallocatechin-3-gallate	18
Wear behavior of a microhybrid composite vs. a nanocomposite in the treatment of severe tooth wear patients: A 5-year clinical study	18
On the synergistic effect of sulfonic functionalization and acidic adhesive conditioning to enhance the adhesion of PEEK to resin-matrix composites	18
Color inconstancy of natural teeth measured under white light-emitting diode illuminants	18
Do resin cement viscosity and ceramic surface etching influence the fatigue performance of bonded lithium disilicate glass-ceramic crowns?	18
Investigating the mechanophysical and biological characteristics of therapeutic dental cement incorporating copper doped bioglass nanoparticles	18
Effect of conditioning and 1 year aging on the bond strength and interfacial morphology of glass-ionomer cement bonded to dentin	17
Evaluation of tooth demineralization and interfacial bacterial penetration around resin composites containing surface pre-reacted glass-ionomer (S-PRG) filler	17
Silane content influences physicochemical properties in nanostructured model composites	17
The effect of therapeutic radiation on dental enamel and dentin: A systematic review	17
Interaction of silane with 10-MDP on affecting surface chemistry and resin bonding of zirconia	17
Influence of postwashing process on the elution of residual monomers, degree of conversion, and mechanical properties of a 3D printed crown and bridge materials	17
Dental stem cell signaling pathway activation in response to hydraulic calcium silicate-based endodontic cements: A systematic review of in vitro studies	17
Graphene nanocoating provides superb long-lasting corrosion protection to titanium alloy	17
Effect of the incorporation of silica blow spun nanofibers containing silver nanoparticles (SiO2/Ag) on the mechanical, physicochemical, and biological properties of a low-viscosity bulk-fill composit	17
Layer characteristics in strength-gradient multilayered yttria-stabilized zirconia	17
Synergistic effects of graphene quantum dots and carbodiimide in promoting resin–dentin bond durability	17
Optimizing glass-ceramic bonding incorporating new silane technology in an experimental universal adhesive formulation	17
Benchtop plasma treatment of titanium surfaces enhances cell response	16
Effect of different manipulations on the physical, chemical and microstructural characteristics of Biodentine	16
Novel speed sintered zirconia by microwave technology	16
Effect of different surface treatments on the biaxial flexure strength, Weibull characteristics, roughness, and surface topography of bonded CAD/CAM silica-based ceramics	16
The pursuit of resin-dentin bond durability: Simultaneous enhancement of collagen structure and polymer network formation in hybrid layers	16
Properties of a modified quaternary ammonium silane formulation as a potential root canal irrigant in endodontics	16
Comparison of physical and biological properties of a flowable fiber reinforced and bulk filling composites	16
Osseointegration of 3D-printed titanium implants with surface and structure modifications	16
A comparison of two types of electrospun chitosan membranes and a collagen membrane in vivo	16
Dental materials science: Research, testing and standards	16
Influence of elapsed time between airborne-particle abrasion and bonding to zirconia bond strength	16
Two-body wear and fracture behaviour of an experimental paediatric composite crown in comparison to zirconia and stainless steel crowns dependent on the cementation mode	15
Fracture resistance of endodontically-treated maxillary premolars restored with different type of posts and direct composite reconstructions: A systematic review and meta-analysis of in vitro studies	15
Histologic and histomorphometric evaluation of new zirconia-based ceramic dental implants: A preclinical study in dogs	15
Photocrosslinkable methacrylated gelatin hydrogel as a cell-friendly injectable delivery system for chlorhexidine in regenerative endodontics	15
Novel technique using cold atmospheric plasma coupled with air-polishing for the treatment of titanium discs grown with biofilm: An in-vitro study	15
Performance of PEEK based telescopic crowns, a comparative study	15
Residual stresses explaining clinical fractures of bilayer zirconia and lithium disilicate crowns: A VFEM study	15
Coaxial electrospun nanofibers as drug delivery system for local treatment of periodontitis	15
Microstructure, composition, and flexural strength of different layers within zirconia materials with strength gradient	15

Biofilm and cell adhesion strength on dental implant surfaces via the laser spallation technique	14
Quantitative nano-mechanical mapping AFM-based method for elastic modulus and surface roughness measurements of model polymer infiltrated ceramics	14
Intelligent pH-responsive dental sealants to prevent long-term microleakage	14
Spatio-temporal temperature fields generated coronally with bulk-fill resin composites: A thermography study	14
Physical-chemical and microbiological performances of graphene-doped PMMA for CAD/CAM applications before and after accelerated aging protocols	14
HEMA-induced oxidative stress inhibits NF-κB nuclear translocation and TNF release from LTA- and LPS-stimulated immunocompetent cells	14
Nano-hydroxyapatite-incorporated polycaprolactone nanofibrous scaffold as a dentin tissue engineering-based strategy for vital pulp therapy	14
Tooth whitening, oxidation or reduction? Study of physicochemical alterations in bovine enamel using Synchrotron based Micro-FTIR	14
Biomechanical properties of a 3D printing polymer for provisional restorations and artificial teeth	14
Differences in the biomechanical behaviors of natural teeth and dental implants	14
Resin-based dental materials containing 3-aminopropyltriethoxysilane modified halloysite-clay nanotubes for extended drug delivery	14
Nitrogen doped titanium dioxide as an aesthetic antimicrobial filler in dental polymers	14
Fabrication and mechanical properties of biomimetic nacre-like ceramic/polymer composites for chairside CAD/CAM dental restorations	14
Antibacterial, biological, and physicochemical properties of root canal sealers containing chlorhexidine-hexametaphosphate nanoparticles	14
Novel rechargeable calcium fluoride dental nanocomposites	14
10-year practice-based evaluation of ceramic and direct composite veneers	14
Evaluation of wear behavior of dental restorative materials against zirconia in vitro	13
Chemical surface modification of lithium disilicate needles of a silica-based ceramic after HF-etching and ultrasonic bath cleaning: Impact on the chemical bonding with silane	13
Impact of varying step-stress protocols on the fatigue behavior of 3Y-TZP, 4Y-TZP and 5Y-TZP ceramic	13
Distinct effects of polyphenols and solvents on dentin collagen crosslinking interactions and biostability	13
Misuse of ISO standards in dental materials research	13
Investigations of silane-MDP interaction in universal adhesives: A ToF-SIMS analysis	13
Characterisation of a Bioactive SiO2-CaO-CaF2-Na2O Glass Used in Composites	13
Long-term elution of bisphenol A from dental composites	13
New hydrogen donors for amine-free photoinitiating systems in dental materials	13
Preparation and evaluation of novel bio-based Bis-GMA-free dental composites with low estrogenic activity	13
Fighting viruses with materials science: Prospects for antivirus surfaces, drug delivery systems and artificial intelligence	13
Additive manufacturing of lithium disilicate glass-ceramic by vat polymerization for dental appliances	13
Fabrication of enamel-like structure on polymer-infiltrated zirconia ceramics	13
Strength-limiting damage and its mitigation in CAD-CAM zirconia-reinforced lithium-silicate ceramics machined in a fully crystallized state	13
The effect of different storage media on the monomer elution and hardness of CAD/CAM composite blocks	13
Development and characterization of a new chitosan-based scaffold associated with gelatin, microparticulate dentin and genipin for endodontic regeneration	13
Fatigue performance of endodontically treated molars restored with different dentin replacement materials	13
Shrinkage stress and cuspal deflection in MOD restorations: analytical solutions and design guidelines	13
Comparison of different etch-and-rinse adhesive systems based on shear fatigue dentin bond strength and morphological features the interface	13
Peptide decorated demineralized dentin matrix with enhanced bioactivity, osteogenic differentiation via carboxymethyl chitosan	13
Cellular properties of human gingival fibroblasts on novel and conventional implant-abutment materials	12
Influence of silane coupling agent on the mechanical performance of flowable fibre-reinforced dental composites	12
Development and characterization of self-etching adhesives doped with 45S5 and niobophosphate bioactive glasses: Physicochemical, mechanical, bioactivity and interface properties	12
Impact of silanization of different bioactive glasses in simplified adhesives on degree of conversion, dentin bonding and collagen remineralization	12
In vivo ageing of zirconia dental ceramics — Part II: Highly-translucent and rapid-sintered 3Y-TZP	12
The effect of accelerated aging on crystalline structures and optical properties of different monolithic zirconia: A qualitative systematic review	12
A dynamic mechanical method to assess bulk viscoelastic behavior of the dentin extracellular matrix	12
Quercetin reduces erosive dentin wear: Evidence from laboratory and clinical studies	12
Novel antibacterial dental resin containing silanized hydroxyapatite nanofibers with remineralization capability	12
Handling properties and surface characteristics of universal resin composites	12
Physical and mechanical properties of four 3D-printed resins at two different thick layers: An in vitro comparative study	12
Comparison of properties and cost efficiency of zirconia processed by DIW printing, casting and CAD/CAM-milling	12
The threshold of an intra oral scanner to measure lesion depth on natural unpolished teeth	12
Towards the development of self-healing and antibacterial dental nanocomposites via incorporation of novel acrylic microcapsules	12
Intranuclear cell uptake and toxicity of titanium dioxide and zirconia particles as well as bacterial adhesion on dental titanium- and zirconia-implants	12
Investigating the mechanical and optical properties of novel Urethandimethacrylate (UDMA) and Urethanmethacrylate (UMA) based rapid prototyping materials	12
Sintering temperature accuracy and its effect on translucent yttria-stabilized zirconia: Flexural strength, crystal structure, tetragonality and light transmission	12
The effect of aging on the wear performance of monolithic zirconia	12
Ion releasing direct restorative materials: Key mechanical properties and wear	12
An in-vitro study investigating the effect of air-abrasion bioactive glasses on dental adhesion, cytotoxicity and odontogenic gene expression	12
Bonding interface and dentin enzymatic activity of two universal adhesives applied following different etching approaches	11
Mechanical and electrochemical characterization of 3D printed orthodontic metallic appliances after in vivo ageing	11
Influence of resin matrix on the rheology, translucency, and curing potential of experimental flowable composites for bulk-fill applications	11
Next-generation biomaterials for dental pulp tissue immunomodulation	11
Load, unload and repeat: Understanding the mechanical characteristics of zirconia in dentistry	11
Biomimetic calcium phosphate coating on medical grade stainless steel improves surface properties and serves as a drug carrier for orthodontic applications	11
Recent advances in dental zirconia: 15 years of material and processing evolution	11
Cytotoxicity and estrogenicity in simulated dental wastewater after grinding of resin-based materials	11
Chemical, structural and cytotoxicity characterisation of experimental fluoride-doped calcium phosphates as promising remineralising materials for dental applications	11
Posterior ceramic versus metal restorations: A systematic review and meta-analysis	11
On the assignment of quartz-like LiAlSi2O6 - SiO2 solid solutions in dental lithium silicate glass-ceramics: Virgilite, high quartz, low quartz or stuffed quartz derivatives?	11
Chlorhexidine-loaded poly (amido amine) dendrimer and a dental adhesive containing amorphous calcium phosphate nanofillers for enhancing bonding durability	11
Does implant surface hydrophilicity influence the maintenance of surface integrity after insertion into low-density artificial bone?	11
Fiber reinforcement of a resin modified glass ionomer cement	11
Nano-structured hydroxyapatite and titanium dioxide enriching PENTA /UDMA adhesive as aesthetic coating for tooth enamel	11
Damage sensitivity of dental zirconias to simulated occlusal contact	11
Trans-mucosal platforms for dental implants: Strategies to induce muco-integration and shield peri-implant diseases	11
Impurities in commercial titanium dental implants – A mass and optical emission spectrometry elemental analysis	11
Influence of different combinations of CAD-CAM crown and customized abutment materials on the force absorption capacity in implant supported restorations – In vitro study	11
A prospective, multi-center, practice-based cohort study on all-ceramic crowns	11
A randomized clinical split-mouth trial of a bulk-fill and a nanohybrid composite restorative in class II cavities: Three-year results	11
Response of pulp cells to resin infiltration of enamel white spot-like lesions	11
Highly-filled flowable composite in deep margin elevation: FEA study obtained from a microCT real model	11
Durability of resin bonding to lithium disilicate using different self-etching and conventional ceramic primers after long-term aging	11
Dry bonding to dentin: Broadening the moisture spectrum and increasing wettability of etch-and-rinse adhesives	11
Influence of thermal and thermomechanical stimuli on a molar tooth treated with resin-based restorative dental composites	11
3D printed denture base material: The effect of incorporating TiO2 nanoparticles and artificial ageing on the physical and mechanical properties	11
Evaluation of ion release and the recharge ability of glass-ionomer cement containing BioUnion filler using an in vitro saliva-drop setting assembly	11
A modified glass ionomer cement to mediate dentine repair	11
Formulation of nano-graphene doped with nano silver modified dentin bonding agents with enhanced interfacial stability and antibiofilm properties	11
Fiber-reinforced composites in dentistry – An insight into adhesion aspects of the material and the restored tooth construct	11
A numerical, theoretical and experimental study of the effect of thermocycling on the matrix-filler interface of dental restorative materials	11
Methacrylate-functionalized proanthocyanidins as novel polymerizable collagen cross-linkers – Part 1: Efficacy in dentin collagen bio-stabilization and cross-linking	11
Experimental two-step universal adhesives bond durably in a challenging high C-factor cavity model	11
Behaviour of different bioactive glasses incorporated in polydimethylsiloxane endodontic sealer	11
Melatonin-doped polymeric nanoparticles reinforce and remineralize radicular dentin: Morpho-histological, chemical and biomechanical studies	11
Adhesion to eroded enamel and dentin: systematic review and meta-analysis	10
Evaluation of rheological behaviour of flowable dental composites reinforced with low aspect ratio micro-sized glass fibres	10
Effect of silane coupling agent and concentration on fracture toughness and water sorption behaviour of fibre-reinforced dental composites	10