Chemical Engineering Communications

Article	Citations
Lower desorption temperature in CO 2 capture using various magnesium oxide loading on iron(III) oxide by ultrasonic-assisted synthesis: the adsorption-desorption and	40
Effect of iron doping on nickel aluminate photocatalytic activity towards the degradation of methylene blue under visible and UV light	30
Sustainable biofuels from corncobs: optimization of microwave pretreatment for enhanced fermentable sugar yield	19
Modeling the simultaneous role of interface layer thickness and particle shape in the gas separation properties of composite membranes	18
Construction of g-C 3 N 4 /BiOCl hybrids via hydrothermal synthesis for efficient photocatalytic degradation of Tetracycline, Rhod	18
Incorporation of graphene nanoplatelets in the synthesis of polysulfone-based polymeric membranes	18
Enhanced CO 2 CH 4 separation using hydroxyl functionalized Mg-MOF-74	17
A review on reaction mechanisms and catalysts of methanol to olefins process	16
Review of hydrogen sulfide purification and purification waste chemical upgrading and reuse technology	15
A flexible formaldehyde sensor based on palladium nanoparticles-polyvinylpyrrolidone-carbon nanotubes-nanocellulose composite films	15
Ionic liquids as green solvents in process industry for reaction and separation: emphasizing on protocatechuic acid recovery	14
Zn bio extraction from a zinc rich paint sludge by indigenous Pseudomonas aeruginosa	14
Control of an integrated first and second-generation continuous alcoholic fermentation process with cell recycling using model predictive control	14
Direct partial oxidation of ethane to ethylene oxide by plasma-catalysis: effects of ethane separate feed and Ag catalysts with Cu and Ni promoters	14
Catalytic effects of eggshell ash on the conversion of used engine oil to fuel by pyrolysis	14
Kinetic modeling of the Fischer-Tropsch synthesis over the Co@C(Z-d)@void@CeO 2 catalyst	14
Measurement and thermodynamic modeling of the surface tension of binary mixtures containing deep eutectic solvent	14
A review on the development of catalysts and technologies of CO2 hydrogenation to produce methanol	13
Improved model structure of direct contact membrane distillation for saline water purification	12
Coupled effect of organic fouling and scaling in the treatment of hyper-saline produced water using forward osmosis	12
Kinetic modeling of dual-stage oxidative extractive denitrogenation of model fuel	11
Physiological parameters as a key tool for understanding and optimizing yeast metabolism and physiology in batch cultures	11
Derivation of full range vapor pressure equation from an arbitrary point	11
The role of adsorption of a natural surfactant at oil–water interface in enhanced oil recovery: interfacial rheology, and structural, and emulsifying analyses	11
Construction and photocatalytic evaluation of homo p–p junction MnCo 2 O 4 /CuO nanocomposite photocatalysts	11

Optimization of the adsorption process in the treatment of sanitary landfill leachate by Fenton-adsorption	10
A practical kinetic model for polyvinyl chloride polymerization in batch reactors	10
Effect of injection timing and duration on the performance of diesel engine fueled with port injection of oxygenated fuels	10
Green corrosion inhibitor for mild steel extracted from soybean leaves	10
Magnetic ferrogels based on crosslinked xanthan and iron oxide nanoparticles: preparation and physico-chemical characterization	9
Coalescence of stable oil/water emulsion through microporous polyvinylidene fluoride membranes	9
Feasibility of predicting performance characteristics of multi-stage centrifugal natural gas compressors, an effort on using data-mining techniques	9
TiO 2 -mediated visible-driven photocatalytic degradation of phenolic compounds: predictive modeling and optimization via machine learning techniques	9
Pitched blade impeller design optimization and effect on solids distribution in stirred tanks	8
Efficient removal of Mn 2+ ions from aqueous solutions using apple pomace biochar	8
An extended solvation theory for electrolyte osmotic and activity coefficients. Application to 1:1, 1:2, 1:3, 1:4, 2:1, 2:2, 3:1, 3:2 and 4:1 aqueous electrolyte solutions	8
Physical properties of deep eutectic solvents based on p-toluene sulfonic acid and employment as catalyst	8
Exploring the cation exchange behavior of cerium (IV) hydroxyethylidene diphosphonic acid: kinetics, thermodynamics, and sorption studies	8
Modeling free surface gas transfer in agitated lab-scale bioreactors	7
Curcuminoid extraction from rhizomes of Curcuma longa via aqueous two phases system	7
Application of integrated molecular distillation-adsorption process for deacidification and recovery of vitamin E and carotenoids from palm oil	7
Innovative ultrasound sonication pretreatment sparger-based microwave assisted extraction method for enhanced essential oil extraction from lemon grass	7
Application of molecular distillation in the recovery of high-value bioactive compounds present in wastes of vegetable oil processing: effect of esterification	7
Carbon nanotubes reinforced poly (methyl methacrylate) polymer composites for the application as classic performance quasi-solid-state dye-Sensitized solar cell electrolytes	7
Enhancement of CO 2 adsorption performance with the chitosan-modified activated carbon by different methods	7
Recovery of cathode materials from inprocess rejected electrode scrape of lithium-ion batteries for enhanced electrocatalytic oxygen evolution reaction	7
Transesterification of the ethyl ester of trifluoroacetic acid to its methyl ester using Amberlyst-15: reaction and purification	7
Preparation of bamboo-shaped mesoporous silica using long-chain alcohol cosurfactants	6
Optimization of process parameters for adsorption of methylene blue by reduced graphene oxide/layered double hydroxide composite	6
Pollutant and heat removal of a small fire in a cinema hall by different ventilation systems	6
Adsorptive removal of 4-hydroxybenzoic acid via cross-linked polymeric microbeads: analysis of isothermal, kinetic and thermodynamic parameters	6
Investigation of mechanisms of sulfamethoxazole adsorption on novel adsorbents developed from reed canary grass	6
Delineation of diffusion pathways in nanostructured porous media by applying lattice Boltzmann modeling on scanning electron microscope images	6
Optimization of ultrasonic-assisted extraction to attain tannins and flavonoids from spent tea leaves using natural deep eutectic solvents	6
Modeling and optimisation studies on the ultrasound-assisted extraction of phenolic compounds fromAzadirachta indica	6
An experimental approach to investigate the viscoelastic and rheological behavior of polydisperse glass suspensions	6
Green synthesized Pd-Ni nanohybrids for controlled degradation of low-density polyethylene films	6
Removal of methylene blue dye from aqueous solution using citric acid modified apricot stone	6
CFD modeling of the turbulent dispersion of liquid droplets in a vessel using a correlation based on local droplet size distribution	6
Photocatalytic degradation of caffeine using metal ion-modified pillared interlayered clays and H2O2 under UV radiation	6
Experimental study and modeling of Pb 2+ sorption by calcined ni/mo hydrotalcite in a fixed-bed column	6
Phenol removal from pharmaceutical effluent using silver doped magnetite biochar: adsorption efficiency and kinetic studies	6
The photosensitization and photocatalytic activity of the n - ZnO/p - CuAl 2 O 4	6
Synthesis and physico-chemistry properties of a diesel-like fuel produced from waste polypropylene pyrolysis oil	6
Synthesis of acrylic acid from methyl lactate over calcium phosphate catalysts in a fixed bed reactor: time-on-stream behavior and kinetic analysis	5
Identification of areas susceptible to calcium carbonate formation on the surface of a plate and gasket heat exchanger	5
A study on the impacts that altered geometries containing a Ferro-Nano fluid affected by a magnetic field could have on a device natural convection	5
Optimization of β-cyclodextrin based ultrasonic-assisted extraction of apigenin and luteolin from celery seed using support vector regression and different nature-inspired optimization algorithms	5
Bubble behavior in a vacuum fluidized bed	5
Removal of methyl violet by Moroccan clays: kinetics study and equilibrium mechanism	5
Review of stability enhanced nanofluids prepared by one-step methods—heat transfer mechanism and thermo-physical properties	5
Solubility and thermodynamic interactions of L-aspartic acid in aqueous organic solvent systems	5
Evaluation of the use of adsorbents based on graphene oxide and cellulose for Cr(VI) adsorption	5
Competitive adsorption of nickel(II) and cadmium(II) ions by chitosan cross-linked with sodium tripolyphosphate	5
A highly efficient and environmentally friendly approach to utilizing Quercus suber pericarp subfractions to remove metallic cations from aqueous solutions	5

Effect of dysprosium doping on structure, morphology, photocatalytic and antimicrobial properties of green synthesized zinc oxide nanoparticles	5
Determination and correlation of solubility and Thermodynamic properties of allantoin in four binary solvents from 288.15 K to 333.15 K	5
The effects of pin-fin shapes on heat sink effectiveness in the presence of a turbulent nanofluid regime	5
Oxidative desulfurization utilizing activated carbon supported phosphotungstic acid in the frame of ultrasonication	5
Determination of optimum parameters using different nano fluids in heat pipe heat exchangers with response surface method	5
Kinetics of microwave-assisted extraction of virgin coconut oil from solid coconut waste	5
Sustainable and energy-efficient approach for cefixime mitigation from wastewater by synergistic integrated advanced oxidation processes: hydrodynamic cavitation, peroxide and ozonation treatment	5
Treatment of biogas slurry using biochar derived from corn straw: elevating the resource utilization potential	5
Comparative study of continuous flow catalytic systems for the transformation of CO2 into propylene carbonate	5
Extraction of palm carotene from crude palm oil by solvolytic micellization: economic evaluation and life cycle assessment	5
Simulation of fluid flow and heat-moisture transfer mechanism in packed bed based on double-diffusion model	5
Optimization of modified soxhlet extraction parameters for squalene recovery from olive oil deodorizer distillate	5
The effect of radiation on entropy and heat transfer of MHD nanofluids inside a quarter circular enclosure with a changing L-shaped source: lattice Boltzmann methods	5
Thermodynamic analysis of ethanol synthesis by CO 2 hydrogenation using Aspen Plus: effects of tail gas recycling and CO co-feeding	5
Evaluation of flow and heat transfer in the condensation of R-406a vapor in circular tubes with extended surface of twisted fins	5
Adsorptive removal of arsenic from water by iron-loaded carbonized spent bleaching earth (Fe-SBE/C) composite	5
A note on the solution to one-dimensional advection-dispersion-reaction problems	5
Optimization of heat transfer in shell-and-tube heat exchangers using MOGA algorithm: adding nanofluid and changing the tube arrangement	4
Valorization of tannin rich triphala waste for simultaneous tannase and gallic acid production under solid state fermentation by Aspergillus niger	4
Debunking the impact of crystallite/particle size in cobalt-based Fischer-Tropsch synthesis	4
Comments on “removal of methylene blue dye from aqueous solution using citric acid modified apricot stone”	4
Irreversibility intent triple diffusion stream over porous medium plate with radiation and joule heating	4
Experimental study on the utilization of magnetic nanofluids in an air-to-air heat pipe heat exchanger	4
Numerical investigation of the effect of water vapor diluent injection on the formation of NOxpollutants	4
Optimal swirl number and equivalence ratio for minimizing the soot and NO emissions in turbulent methane combustion	4
CO conversion to liquid fuel over a bi-functional Co/H-ZSM-5 catalyst: effect of support desilication and catalyst promotion	4
Modeling of lead (II) ion adsorption on multiwall carbon nanotubes using artificial neural network and Monte Carlo technique	4
Optimization of levulinic acid esterification via surface response methodology using single metal oxide nanoparticle as heterogeneous catalyst	4
Application of tracer technology in wastewater treatment processes: a review	4
Simplification of transesterification kinetics in biodiesel production using statistical criteria	4
Biosorption studies of methylene blue dye using NaOH-treated Aspergillus niger-filled sodium alginate microbeads	4
An extraction-based facile method for measuring the solubility of organic solid compounds in supercritical carbon dioxide	4
Enhanced photocatalytic degradation of 4-nitrophenol using hexagonal ZnO/rGO composites: synthesis, characterization, mechanism, and kinetic analysis	4
Removal of atrazine from aqueous solutions using activated carbon from novel hackberry seeds: kinetics and equilibrium studies	4
CFD—ANN study on axial dispersion in helical and serpentine millimetric coils	4
Simple assembly of graphene oxide functionalized with tannic acid on membranes to enhance dye removal	4
Experimental design for removal of lead ions from water samples using an engineered novel chitosan functionalized Schiff-base adsorbent	4
Enhanced removal of emerging recalcitrant pharmaceutical contaminants through integrated anaerobic and photocatalytic treatment	4
Solubility of Spirulina platensis biomass: effect of pH, saline concentration, and ultrasound treatment	4
Evaluation of biosorbent properties of Teucrium polium seeds in Rhodamine B removal; isotherm, kinetic, thermodynamic studies	4
Hydrodynamic investigation of a novel ultra-capacity tray, using centrifugal and inertial separation technologies	4
Comparison of Dubinin–Radushkevich isotherm variants for types I and V adsorption of water contaminants	3
Novel hybrid algorithm approach for modeling pressure drops in fluidized beds using dimensionless parameters	3
Enhanced performance of CoNi nanoparticles-decorated activated carbon anode for direct urea fuel cells: from simulated solutions to real wastewater applications	3
Optimization and numerical investigation of the effect of wall conduction and magnetic field on the nanofluid flow inside a three-dimensional enclosure using the lattice Boltzmann method	3
Adsorption of organic acids from offshore produced water using microporous activated carbon from babassu pericarp: a low-cost alternative	3
Robustness of visible-light photocatalytic degradation of volatile organic compounds using Wolfram-doped TiO 2 anatase	3
Adsorptive properties of modified Thevetia peruviana shells (TPS) for removal of Methoxychlor from aqueous solutions	3
Estimation of specific reactivities of commercial gel-type resins through modeling the chain sequences distribution	3
Synthesis and characterization of N-doped graphene oxide quantum dots/Fe-BDC composite for methylene blue decomposition	3
Growth dynamics and morphology of D 2 O + HFC-134a clathrate hydrate crystal toward tritiated water separation	3
Retraction: Enhanced heat transfer properties of the magnetite nanofluids due to Neel and Brownian relaxation mechanisms	3
Oxidation of phenol by persulfate activated by zero-valent iron-biochar composites	3
Evidence of loss of N2/O2 adsorption selectivity of Li zeolite due to ion exchange between sodium and lithium cations	3
Numerical analysis of drag reduction of fish scales inspired Ctenoid-shape microstructured surfaces	3
PVA/TS-1 composite embedded thin-film nanocomposite reverse osmosis membrane with enhanced desalination performance and fouling resistance	3
Thermal stress stability of hydrocarbon fuels under supercritical environments	3
An accurate residence time distribution measurement method for low volumetric flowrate systems, with application to heap leaching columns	3
Influence of the processing factors on deresination rate and the residual resin on properties of deresined montan wax	3
Solid-liquid equilibrium of in some pure solvents and binary solvents from 293.15 K to 318.15 K	3
Catalytic activities of tannase covalently linked to amino-functionalized carbon nanotubes	3
Low carbon steel corrosion inhibition using environment-friendly Solanum Lycopersicum extract in monoprotic and diprotic acidic medium	3
Research progress on hazardous chromite ore processing residue treatment and utilization: a critical review	3
Investigating the photocatalytic removal of amoxicillin from aqueous solutions by Fe-TiO 2 @Fe 3 O 4	3
Comparative analysis of carbon footprint of various CO2-enhanced oil recovery methods: A short experimental study	3
Extraction of crystalline nanocellulose from palm tree date seeds (Phoenix dactylifera L.)	3
Carbon nanotubes (CNTs) and graphene oxide (GO) hybrid enhanced canola protein isolate (CPI) bioadhesive for interior wood applications	3
Thermal treatment of K-feldspar for potassium recovery using NaCl–CaCl2mixture and its mechanism study	3
Preparation of flower-like structured CaCO 3 biosorbent for efficient methylene blue removal	3
Thermodynamics and kinetic studies for the microwave-enhanced extraction of phenolics from Phyllanthus niruri leaves	3
Catalytic performance and kinetic modeling of n-hexane isomerization over phosphomolybdic acid (HPMo) combining palladium and platinum supported on metal-organic framework MIL-101(HPW)	3
Development an effective adsorptive treatment strategy for the removal of cadmium from textile wastewater by CuBi 2 O 4 @Fe	3
Treatment of Cr(VI)-containing wastewater with FeC 2 O 4 ·2H 2 O prepared from chromite ore pro	3
Process conditions sensitive (PCS) thin-layer mathematical model of hot air convective drying	3
Catalytic pyrolysis of algae: kinetics and thermodynamic analysis	3
Detailed mass transfer studies of a ternary system associated with intermittent jerking of the liquid − liquid interface	3
Development of nanoparticles for pharmaceutical preparations using supercritical techniques	2
Application of fuzzy control in the evaporation stage of a first- and second-generation sugarcane ethanol biorefinery	2
Enhanced accuracy in methane reforming equilibrium predictions through hybrid optimization algorithm	2
Enhanced oxidative coupling of methane using strontium and barium doped lanthanum or samarium oxide nanocatalysts	2

Aqueous biphasic systems based on ethyl lactate: Molecular interactions and modelling	2
Liquid–liquid dispersion system in a moving baffle OBC: a numerical and theoretical study	2
Eco-friendly synthesis of zeotype from reused diatomaceous earth: characterization and adsorptive potential evaluation	2
Optimization of operating conditions for energy conservation in a packed-bed absorber	2
Coupling machine learning and group contribution method to predict density and viscosity of ionic liquid-inorganic solvent-water ternary mixtures	2
Fructose-mediated single-step synthesis of copper nanofluids with enhanced stability and thermal conductivity for advanced heat transfer applications	2
Removal of cutting oil from wastewater by utilization of novel adsorbent developed from teak leaf (Tectona grandis): equilibrium, kinetic, and thermodynamic studies	2
Synthesis of hybrid layered double hydroxides (HLDH) and application as adsorbent for removal of direct sky-blue dye	2
Quantitative analysis of fluid heat transfer behavior in a proton exchange membrane water electrolysis cell	2
Sensitivity of pin-fin configuration to pin diameter: heat transfer enhancement	2
Characteristic curves correlations to predict SARA composition and gas yields during heavy crude oil non-catalytic aquathermolysis	2
Modes of interaction and thermodynamic behavior of aggregation of CTAB + BSA mixtures in diols media: effects of diols composition and temperature	2
Optimization of liquid hot water pretreatment for extraction of nanocellulose crystal from South African waste corncobs	2
Synergistic extraction of cobalt (II) and nickel (II) with a mixture of D2EHPA and 1-octanol	2
Green synthesis of silver nanoparticles via ionic liquid mediated ultrasonic extracted secondary metabolites from Amaranthus viridus and their antibacterial performance	2
Study on adsorption of methylene blue by modified peanut shell: adsorption kinetics, thermodynamics, isotherm properties	2
Aqueous solubility enhancement of theobromine using eco-friendly hydrotropic phenomena	2
CFD analysis of natural convection between two superposed fluids: role of corrugated bottoms	2
System identification and control of heat integrated distillation column using artificial bee colony based support vector regression	2
Statistical analysis and shape optimization of a finned corrugated heat exchanger using RSM	2
Developed procedure for Sn (II) extraction from hydrochloric acid medium with CYANEX 921 and its recovery from spent LCD screens	2
Cerium doping of FeS 2 for the effective hydrogen evolution reaction (HER) electrocatalysis	2
Three-phase crystallization for purification of acrylic acid from acrylic/propionic acid mixture	2
Review of PPCPs remediation in Asia: the role of agricultural waste in adsorption-membrane hybrid technology	2
Experimental thermal and hydraulic study of super hydrophobic wavy mini channel heat sink using aqueous nanofluids	2
Monitoring batch suspension polymerization process based on calorimetric-state estimation technique	2
Facile synthesis of low-cost chitosan/Fe3O4@C composite for highly efficient adsorption of levofloxacin antibiotic	2
Kaolin-supported Ni and Co catalysts for hydrogen production from acetic acid by catalytic steam reforming	2
Mass transfer models for the adsorption of 2,4-dichlorophenoxyacetic acid (2,4-D) and atrazine herbicides from agricultural wastewaters	2
Separation and phenol recovery from resin effluents by ultrafiltration. A proposal to use this method on an industrial scale	2
A study on microfluidic desalination using short-chain fatty acid by directional solvent extraction in a serpentine micromixer	2
Coupling aquathermolysis of water-heavy oil-methanol catalyzed by o-phenanthroline-Cu(II) complex at low temperature	2
Fabrication, characterization and corrosion inhibition properties of SCW-based ZnO nanofluids	2
Synthesis of silica-coated polygonal Fe 3 O 4 nanoparticles	2
Study on activity and stability of Pt-Ru/WOx/Al2O3 catalyst in the glycerol selective hydrogenolysis to 1,3-propanediol	2
Augmentation of heat transfer in a DPHE with bowl cut twisted tape inserts and TiO 2 /CuO hybrid nanofluids	2
Optimization of superstructure network in the CCS/CCSU system for CO 2 reduction from exhaust gas industry and gas field in Indonesia as archipelago state	2
Preparation and characterization of chitosan graphene oxide nanocomposite for the removal of 17-β-estradiol sulfate from water: kinetics, thermodynamics and simulation studies	2
Separation of free fatty acids and neutral lipids from an aqueous suspension of crude microalgae oil with ethyl acetate	2
Effective adsorbents developed from magnetic iron oxides and thiamin for the removal of hazardous organic contaminants	2
Enhancing the conversion of waste motor oil into diesel-like fuels using mineral-impregnated biochar catalysts	2
Experimental investigation of operational E-PVC drying conditions on morphological properties of particles in a pilot-scale spray dryer	2
Comparison of different combinations of heterogeneous and homogeneous bipolar and ion exchange membranes in lab-scale electrodialysis stack	2
Investigation of photocatalytic activity of TiO2 nanotubes synthesized by hydrothermal method	2
Simulation perspective of upgrading biomass producer gas through a shift-methanation reaction coupled with cyclic CO2 capture	2
Estimating the high heating value of a high-calorie food using a rigorous thermodynamical approach	2
Synthesis of magnetic zirconium oxide-iron oxide nanoparticles composite using chemical precipitation process for Pb (II) adsorption	2
A comprehensive review of alumina as an effective filler for enhanced electrochemical properties of solid polymer electrolytes	2
Effect of 662 keV Cs 1+ ion radiation on the dielectric behavior of the PVDF/Ba 0.5 Sr 0.5 TiO	2
A mini review on the potential of zeolite membrane for pervaporation	2
Preparation, characterization of co-Ni co-doped titania photocatalyst and its application for the photocatalytic degradation of textile and PPCPs industrial wastewater under sunlight	2
Modeling spinel oxide based-photocatalytic degradation of organic pollutants from industrial wastewater	2
Use of brewery spent grains as a biosorbent for reactive blue 5G dye removal: batch and continuous flow studies	2
Effect of shear-thinning property on vortex evolution and pressure fluctuation in an axial flow pump	2
Corrosion behavior and surface properties of mild steel in aqueous citrate solutions	2
Harvesting Zr-based metal-organic frameworks by continuous-flow synthesis as efficient adsorbents for eliminating nitrogen-containing compounds in liquid fuel	2
Batch and continuous adsorptive removal of brilliant green dye using modified jamun seed powder: RSM based optimization	2
Deactivation and regeneration of bimetallic Pd-Ag/Al 2 O 3 catalyst in acetylene semi-hydrogenation process: an experimental and k	2
Valorization of toxic methylene blue dye adsorption by sodium alginate/carboxymethyl cellulose/activated carbon ternary composites	2
Synthesis of eco-friendly bio-based coconut shell magnetic biochar for efficient bisphenol S sequestration in aqueous environment: green technology breakthrough	2
Effects of magnetic field gradient on heat transfer and irreversibility in a channel	2
Ambient pressure drug loading on trimethylchlorosilane silylated silica aerogel in aspirin controlled-release system	1
Two-phase modeling of low-Reynolds turbulent heat convection of Al2O3-water nanofluid in a 2-D helically corrugated channel	1
Effect of molecular weight for nonionic surfactants derived from renewable raw material on micellization process	1
Rapid pressure-decay technique for determining the O2 and CO2 permeability coefficients of polymeric films considering the gas compressibility effect	1
Removal of paracetamol from aqueous solution by wood sawdust-derived activated carbon: Process optimization using response surface methodology	1
Effect of fluoride on the properties of spray-dried niobium-based composites: structure, porosity, particle size, morphology, and photoactivity	1
Recent progress in ceramic membrane technology for the removal of emerging contaminant from wastewater: a critical review	1
Extruded and overlapped geometries of feed spacers for solution mixing in electrochemical reactors and electrodialysis-related processes	1
Effects of temperature and catalytic reduction of sulfur content on kinematic viscosity and specific gravity of tire pyrolysis oil	1
Using neural network and RSM to evaluate improvement in thermal conductivity of nanodiamond-iron oxide/antifreeze	1
Effectiveness of nanofluids for increasing nucleate boiling: comparison review	1
Corrosion behavior of aluminum alloy in sulfur-associated petrochemical equipment H2S environment	1
Twenty years of making inorganic ultrafine fibers via electrospinning and sol–gel techniques I: an update on catalysis, photocatalysis, and adsorption R&D opportunit	1
Optimizing the microwave-assisted extraction and ultrasonic-assisted processes to acquire flavonoid and phenolic compounds from watermelon rinds using natural deep eutectic solvents	1
Alkaline delignification of tropical hardwoods: a promising approach for materials development	1
Efficient removal of a pharmaceutical compound on organoclay: batch experiment, DFT calculation, statistical physics, and modeling	1
Flash point prediction of binary partially and totally miscible alcohol-water mixtures by various equation of states and experimental validation	1
Low thermal oxidation of gaseous toluene over Cu/Ce single-doped and co-doped OMS-2 on different synthetic routes	1
Bioremediation of anthraquinone dye using bimetallic Ni-Zn nanohybrid synthesized from Ficus exasperate leaf extract	1
Green synthesis of graphene structures from biomass for inkjet printing applications and CO 2 recovery	1
Improving methylene blue removal efficiency using Fe nanoparticles infiltrated on KCC-1 derived from palm oil fuel ash: optimization and regeneration studies	1
Effective removal of Congo red from aqueous solutions using ethylenediamine-modified wheat straw as adsorbent	1
The hydrodynamic characterization of an oval airlift open pond (AOP) in the air–water system	1
Fixed bed adsorption of water and air contaminants: analysis of breakthrough curves using probability distribution functions	1
Experimental and numerical analysis of heat transfer and fluid flow characteristics inside pulsating heat pipe	1
Innovative approaches for decolorization of malachite green-contaminated wastewater using sustainable composites: an overview	1
Mechanistic model-based control of biodiesel production processes: a review of needs and scopes	1
Enhancing polyethersulfone microfiltration membranes with chitosan and sodium alginate: a synergetic approach for improved dye removal and flux recovery	1
Comprehensive analysis of water vapor sorption kinetics and mechanisms using biosorbent pellets from canola meal and oat hull	1
Solubility measurement, thermodynamic modeling, and molecular dynamic simulation of glycylglycine in five binary solvents	1
Preparation of polyvinylidene fluoride membranes with enhanced hydrophobicity and its applications in chromium recovery using supported liquid membranes in practical scale	1
Improving feeding profile strategy for hydrogen production by Cyanothece sp. ATCC 51142 using meta-heuristic methods	1
Optimizing the production of solketal from glycerol: a case study integrating Aspen Plus and a MATLAB subroutine	1
Clonazepam adsorption using biochars from Açaí endocarp and gasification of wood waste: a comparative study	1