Acta Astronautica

Papers
(The median citation count of Acta Astronautica is 4. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-05-01 to 2026-05-01.)
ArticleCitations
Decreased human sperm motility and vitality after fast gravity load changes in a parabolic flight90
Heating patterns and temperature distribution of projectile surface in lunar regolith penetration87
Publisher's note85
CerAMfacturing of a ceramic aerospike engine78
A reference implementation for knowledge assisted robot development for planetary and orbital robotics77
Dynamics of jettison during Earth-to-NRHO transfers75
The use of detailed kinetics for modeling aerospace propulsion devices72
Spray angle prediction model for a multi-slit type throttleable gas–liquid pintle injector71
Adaptive control design for active Pogo suppression of large strap-on liquid launch vehicles69
‘Sub-orbital activities’ – the application of ‘international law’ in the twilight between air and space law62
Towards a GNSS-assisted autonomous heterogeneous clock system for very small satellites in the Earth-Moon system60
Risk assessment for asteroid impact threat scenarios58
The effect of three body positions on colour preference: An exploration of microgravity and lunar gravity simulations58
Numerical study of detonation propagation under the action of supersonic pulsating flow in expanding combustor57
TWO-STAGE ‘slingshot amplifier’ can detect subtle gravitational deviations54
Markers of distress among behavioral and physical health evacuees prior to emergency departure from Antarctica54
A Martian analog for spatially varying methane microseepage - polygons at Expedition Strip, Axel Heiberg Island53
Three decades of ethological research in the space field within an interdisciplinary framework51
Preventing inlet unstart in air-breathing hypersonic vehicles using adaptive backstepping control with state constraints49
Suppression of combustion instability in a scramjet engine using unsteady fuel injection49
Exploring the potential of fractionated spacecraft for enhanced satellite connectivity: Application to the satellite-to-cell case48
Shock-tube study of high-temperature ignition of propane-air mixtures at elevated pressures48
Defining the notion of mining, extraction and collection: A step toward a sustainable use of lunar resources46
Estimation of a Craig–Bampton equivalent model using a hybrid particle swarm optimization for DCLA purposes46
Simulations of satellites mock-up fragmentation44
Risk trade-space analysis for safe human expeditions to Mars44
Nonlinear finite element algorithm for solving fully coupled thermomechanical problems under strong aerothermodynamic environment44
Influence of wall curvature on evolution of converged flow generated by crossing shock wave/boundary layer interaction: An experimental study43
A deep neural network framework with Analytic Continuation for predicting hypervelocity fragment flyout from satellite explosions43
Planning and optimal control of a Venus variable altitude aerobot42
Research, development and production costs prediction parametric model for future civil hypersonic aircraft42
Feasibility study for a commercial space station in low earth orbit42
Assessing black soldier fly pupation and survival in lunar regolith simulant: Implications for sustainable controlled habitats on the Moon42
Optimization procedure for wings flying in the Martian atmosphere41
NASA's BioSentinel deep space CubeSat mission: successes and lessons learned41
A Geospatial Artificial Intelligence and satellite-based earth observation cognitive system in response to COVID-1941
Self-deployable hinges for monolithic space structures using multi-material additive manufacturing41
Development and characterization of the ECLIPS space environments simulation facility40
Application of the finite element method to evaluate the effectiveness of spacecraft protective screens39
KPLO's conjunction mitigation in lunar orbit: Operational results and strategic insights from international collaboration38
Guidance for autonomous spacecraft repointing under attitude constraints and actuator limitations38
Operationalizing the definition of “Commercial Space”37
A summary of previous investigations of the microgravity effects on bacterial virulence, infection and antibiotic resistance37
Optimization design and mechanism study of ion thruster performance based on CO2/xenon multi-propellant37
Reinforcement learning-based control of the charge management system in inertial sensors37
Design and implementation of the integrated thermal control system for Chang’E−5 lunar module37
The Effects of Pointing Error Sources on Energy Delivery from Orbiting Solar Reflectors37
Probabilistic Risk Assessment (PRA) for Artemis and future space exploration programs36
Generation and stability analysis of long-term bounded spacecraft cluster orbits using Lagrangian Coherent Structures36
Projections of Earth’s technosphere: Luminosity and mass as limits to growth36
The technology platform of the EIVE CubeSat mission for high throughput downlinks at W-band35
Criteria for selection of point-ahead angle compensation strategy in intersatellite laser ranging interferometry of TianQin based on research of tilt-to-length coupling noise35
Geometric mechanics framework for tethered de-spinning of massive asteroids by small tug using passivity-based control34
Determining the best technique: Methods, challenges, and innovations of performing microgravity CPR34
Optimal low-thrust lunar orbit transfers with shadowing effect using a multiple-arc formulation34
Internal imaging of an extremely small-scale electron cyclotron resonance source revealing the formation of discharge mode transitions and hysteresis34
Numerical and experimental investigations of micro Al particle additive on the performances of HTPB hybrid rocket motors34
Approaching and pointing tracking control for tumbling target under motion constraints33
Threat assessment for non-cooperative spacecraft integrating orbital dynamics and image quality33
Lunar landing necessary building blocks and good practices for a sustainable development of human lunar activities33
Cost estimation for launch vehicle families considering uncertain market scenarios33
Impedance control in serial-parallel hybrid space robots for assembly operations32
Optimisation of a hybrid NS–DSMC methodology for continuous–rarefied jet flows32
Collision-free control of a nano satellite in the vicinity of China Space Station using Lorentz augmented composite artificial potential field32
Development of a deployable Synthetic Aperture Radar antenna for a nanosatellite conceptual design32
Thermite-for-demise (T4D): Experiments and numerical modelling on ball-bearing unit mock-ups containing thermite in an arc-heated wind tunnel32
Mathematical modeling of nonequilibrium combustion processes in a liquid rocket engine31
Relative orbit transfer using constant-vector thrust acceleration31
Hybrid neural network adaptive relative navigation for orbital games31
A revised theoretical model for oblique detonation engines31
Extreme low-temperature freezing process and characteristic curve of icy lunar regolith simulant31
Study on controllable set of contingency return trajectories for crewed lunar missions based on interval analysis31
Lunar highlands simulant — Geotechnical characterization, 3D discrete element modeling, and cone penetration simulations30
Computational and experimental study of an ion injector of a weakly divergent ion beam for implementing a method for removing space debris objects by an ion beam30
Evaluating sensor tasking strategies for object cataloging in GEO30
Inertia-adaptive trajectory planning of a dual-arm space robot for rapid in-space assembly30
Experimental demonstration of a water electrolysis Hall Effect Thruster (WET-HET) operating with a hydrogen cathode30
Systematic review of engineering and testing approaches for radiation hardness assurance in commercial space avionics30
A sweeping and grinding combined hybrid sampler for asteroid sample return mission29
Evaluating launcher options for Europe in a world of Starship29
Pléiades Neo satellites: new assets for emergency response and disasters management29
AI-based monocular pose estimation for autonomous space refuelling29
Impact of propellant temperature on the emission regime of an externally wetted electrospray system using time-of-flight mass spectrometry29
High-precision attitude determination using spaceborne gravity gradiometer and gyroscope29
Form-finding design of creased cable-membrane structures based on nonlinear finite element method29
Dynamic evolution and morphological analysis of supersonic turbulence arising during the collision of prolate and spherical clouds29
Quasi-Optimal Guidance and Control in Very Low Earth Orbit via Deep Learning for Drag-Based Collision Avoidance29
Primary cilia shortening alters osteocyte mechanotransduction: Spaceflight vs. simulated microgravity29
Effects of liquid-fuel temperature on rotating-detonation-wave propagation28
Improved contactless attitude control law of uncooperative spacecraft by laser ablation28
Isolation and confinement due to the COVID-19 pandemic: Lessons for human spaceflight28
Ablation model of thermal protection coating with silicone rubber coupled with aerothermodynamic environment within boundary layer28
Model-based controllers for CubeSat ORU installation: A comparative study28
Phototrophic microorganisms in bioregenerative life support systems for long-term crewed expeditions: Prospects and challenges28
Solar sail optimal maneuvers for heliocentric orbit apse line rotation27
Erratum to “Aerodynamic control system for a deployable re-entry capsule” [Acta Astronaut. 181, April 2021, 707–716]27
Occlusion-aware trajectory prediction for time-delayed teleoperation of space manipulators27
The ion beam interceptor concept for a space station collision avoidance with space debris27
A low-cost adapter for the rehydration of commercially available food and beverages for spaceflight27
The Comet Interceptor Mission—Making a case for Solar Electric Propulsion27
On gamma-ray spectrometry of rare earth elements on the moon: Reference data from proton accelerator experiment27
Building a 21st century spaceport: Development and application of the spaceport readiness level scale27
Effectiveness of a supersonic jet-jet interaction technique on flow structure in an underxepanded jet impinging on a perpendicular plate27
Publisher's note27
Spectral mass gauging in terrestrial gravity and microgravity conditions27
Vectorial formulation for the propagation of average dynamics under gravitational effects27
Spacecraft orbital stability vs total solar irradiance27
Assessment of static and dynamic deformations of the orbital station shell by a system of integrating fiber-optic sensors27
Safety in Space27
Space-based surveillance of Resident Space Objects with the CHEOPS space telescope26
Robust adaptive guidance for autonomous asteroid landing via search-based meta-reinforcement learning26
Social isolation in space: An investigation of LUNARK, the first human mission in an Arctic Moon analog habitat26
The “Effect of Marangoni Convection on Heat Transfer in Phase Change Materials” experiment26
LUMIO: A CubeSat for observing and characterizing micro-meteoroid impacts on the Lunar far side26
Corrigendum to “Observation of atmospheric gravity waves using a Raspberry Pi camera module on board the International Space Station” [Acta Astronaut. 182 (2021) 416–423]26
The vision-based guidance, navigation, and control system of Hera’s Milani CubeSat26
Using the space debris flux to assess the criticality of the environment in low Earth orbit26
Analytical investigation of outflow currents in applied field magnetoplasmadynamic thrusters26
Component assignment and layout optimization for multi-module microsatellite considering variable module size26
Minimal mass design of a tensegrity tower for lunar electromagnetic launching26
Characterization of a Phase Change Propellant Management Device26
Direct ink writing of viscous inks in variable gravity regimes using parabolic flights26
Planetary sunshade for solar geoengineering: Preliminary design of a precursor system and mission25
Efficient and accurate flexible multibody dynamics modeling for complex spacecraft with integrated control applications25
Influence of passive strut on the mixing and combustion performance enhancement25
Design space investigations of scramjet engines using reduced-order modeling25
Time-optimal coordinated detumbling and pose adjusting control of a non-cooperative target with model uncertainties25
Modeling the gravitational field of the ore-bearing asteroid by using the CFD-based method25
Spark plasma sintering and optical characterization of lunar regolith simulant25
Flows past airfoils for the low-Reynolds number conditions of flying in Martian atmosphere25
Integrated architecture for navigation and attitude control of low-cost suborbital launch vehicles25
Hierarchical optimization method of space patrol task assignment based on deep neural network and consensus-based bundle algorithm24
Miniature semiconductor neutron spectrometer HardPix for surface mapping of lunar water24
Monitoring Cislunar fragmentation events using a constellation of space-based observers24
Surrogate-based optimization on bump for shock wave/boundary layer interaction control24
Pico-satellite formation configuration method accounting for relative position-attitude coupling24
NetSat—Challenges and lessons learned of a formation of 4 nano-satellites24
Suppression of flow response hysteresis in the throttling/unthrottling process for supersonic inlet24
Enhancing terrestrial solar power using orbiting solar reflectors24
Preliminary analyses on technical and economic viability of moon-mined propellant for on-orbit refueling24
A planning tool for optimal three-dimensional formation flight maneuvers of satellites in VLEO using aerodynamic lift and drag via yaw angle deviations24
Poly(vinyl alcohol) gels cross-linked by boric acid for radiation protection of astronauts24
Multi-criteria decision-making approach for automated planning and scheduling of lunar launch and landing pad construction24
A novel design of CubeSat deployment system for transformable structures24
Shock-tube study of spallation phenomena at strong shock wave interaction with graphite surface24
Multi-Objective Evolutionary formulations for design of hybrid Earth observing constellations24
Development of a competence ecosystem for the future space workforce: strategies, practices and recommendations from international master programs in northern Sweden24
Optimization of vacuum arc thruster efficiency through inductive energy storage circuit control24
A review of selective laser sintering/melting techniques for lunar construction24
The influence of confined channel configuration on the detonation waves induced by hot jet under supersonic pulsating flow23
Integrated optimization of Martian regolith Sintering: Tailoring microstructure and performance in a mineralogically replicated simulant23
Composition optimization of a hypergolic green propellant based on monoethanolamine, n-butanol and 90% hydrogen peroxide23
System design and validation of independently articulated suspension leveraging a sum-of-moments framework for the BioBot system23
Simulation study of magnetic field effects on particle distribution and energy conversion in E×B electric propulsion thrusters23
The role of space-based data in European climate policies23
Machine learning-based quasi-optimal feedback control for a propellantless re-entry23
Immunological, hormonal and hemostasis parameters in cosmonauts’ blood after long-term orbital missions23
Tiny satellites, big challenges: A feasibility study of machine vision pose estimation for PocketQubes during conjunctions23
HERCCULES: A university balloon-borne experiment for BEXUS 32 to characterize the thermal environment in the stratosphere using COTS23
Physics-informed orbit determination for X-GEO space situational awareness23
DIANA: An underwater analog space mission23
Experimental investigation on propagation characteristics of rotating detonation wave fueled by diesel23
Neural learning-based dual channel event-triggered deployment control of space tethered system with intermittent output23
Enhanced microwave discharge cathode performance based on external gas injection with coupling mode operation23
Experimental study and performance analysis of a dual-mode space propulsion system pressurized by electric pump23
Editorial for the special issue of 72nd IAC, Dubai, UAE, 25–29 October 202123
Impact of chemical modeling on the numerical analysis of a LOx/GCH4 rocket engine pintle injector23
Development of the on-orbit maintenance and manipulation workbench (MMW) for the Chinese space station23
Planetary protection trades and lessons learned from designing Mars Sample Return’s Capture, Containment, and Return System23
The potential benefits of melatonin in the prevention and treatment of bone loss in response to microgravity23
On ecologically-safe high-speed vehicles: Conceptual design study of the next generation supersonic transport23
Research on laser induced plasma ignition of gas oxygen/methane22
High-fidelity flexible multibody model considering torsional deformation for nonequatorial space elevator22
Performance enhancement of microwave discharge cathode by external gas injection system22
Behavioral changes in Drosophila males after travel to International Space Station. Part II. Larvae vs. Imago22
Non-fragile negative imaginary output feedback control for attitude stabilization of flexible spacecraft22
A computational investigation of shock wave train in diverse duct geometries using machine learning-adopted k-ω turbulence model22
Mass property estimation on TSE(3) via unscented Kalman filter using RCS thrusters22
A solution of lunar manufacturing and launch base22
Ultrasonic augers for improved transport of granular materials22
Experimentally backed model of bubbly flow in a CNTP reactor22
Simulated artificial interventions maintain species diversity of spatially structured microbial communities in closed ecosystem22
Evaluating the environmental impact of space missions22
Multidisciplinary design and metamodel assisted optimization for a telecommunication satellite with large-size payload22
Bremsstrahlung power conversion for fusion power and propulsion in space22
Differential sputtering yield measurement of ion grid materials by novel arch array system22
“Operating spacecraft around comets: Evaluation of the near-nucleus environment”22
Machine learning methods for modeling the kinetics of combustion in problems of space safety22
Design of magnetically enhanced hollow cathode micro-thruster: Concept and experimental research22
Investigation on the collision law between high-temperature alumina droplets and thermal insulation materials21
Effects of nickel and manganese on ductile iron utilizing ionic liquid harvested iron and Bosch byproduct carbon21
Forecasting F1021
Experimental study on performance improvement of a water-fueled miniature ion thruster by electrode voltage21
Pulse volume discharge behind shock wave in channel flow with obstacle21
Multiple spacecraft coordination and motion planning for full-coverage inspection of large complex space structures21
Additive manufacturing of ceramic multi-material heating and ignition elements for a sustainable space access21
Gelled hydrogen peroxide: Hypergolic reaction with low toxicity fuel by drop and impinging jets tests21
Planetary defense governance: Thirty years of development and the multilateral future21
Conceptual design of a tilt-rotor unmanned aerial vehicle for Mars exploration21
Study on the influence of operating conditions and tangential inlet diameter on the spray characteristics of gas-centered swirl coaxial injectors21
Optimal Sun-tracking law for remote sensing satellites operating under observation constraints21
The additionally charged forces in the Sun-Earth and Earth-Moon systems21
Rendering knowledge graphs from aerospace dentistry processes for clinical decision support systems21
Corrected closed-form solutions to the Schweighart–Sedwick satellite relative motion model including differential drag21
Microbial purification of perchlorate in a simulated Martian water to ensure its plant cultivation for Martian BLSS21
Pulsed feedback control for directional rendezvous on eccentric orbits under propulsion constraints21
Systematic methodology for the preliminary design of future rotary VTOL Martian aerobots21
Review on orbital debris mitigation: Techniques for effective tracking, monitoring, and removal20
Two-stage DRL with hybrid perception of vision and force feedback for lunar construction robotic assembly control20
Analysis of prospective flight schemes to Venus accompanied by an asteroid flyby20
Profiling the transmit power of LEO satellite constellations for broadband communication services considering terrestrial and aerial demand20
Study on the collision characteristics between high-temperature alumina droplets and char layer20
Experimental study on precise thrust control of hydrogen peroxide and polyethylene hybrid rocket motors20
Americium fuelled radioisotope stirling generator for lunar surface mobility systems20
Conceptual design and research on the thermal performance of a martian human base20
Clustering investigation of scramjet combustion processes based on contrastive learning20
Is artificial intelligence the great filter that makes advanced technical civilisations rare in the universe?20
Space traffic management: Large constellations20
Numerical simulation and experimental study of high-speed impact penetrator for lunar subsurface20
Effects of long-term storage on properties of perovskite solar cells20
Atomic insight into the combustion behavior of aluminum nanoparticles under mixed atmosphere of H2O, CO2 and O220
RETRACTED: Vibration-induced friction reduction in lunar regolith simulant: Mechanisms and key parameters20
Cocopeat supplementation negates lunar soil simulant-induced baneful phenotypic and biochemical changes in crop seedlings20
Magnetic cleanliness verification of miniature satellites for high precision pointing19
Virtual reality, augmented reality and mixed reality: For astronaut mental health; and space tourism, education and outreach19
Sky lake – Moon environment design19
Dry ice propellant for electric propulsion with triple-point storage19
Quantifying the risk of medical evacuation in spaceflight19
Space tether research at the University of Stuttgart19
Evolution of oxide composition, liquidus temperature, and viscosity during lunar molten regolith electrolysis19
Space taxonomy: Need for a progressive tax regime19
Spacecraft protection against man-made and natural space debris particles19
MIT Zero-G outreach initiative: Using experiment design and virtual reality to inspire the next generation of space scientists and engineers19
NOx emissions estimation methodology for air-breathing reusable access to space vehicle in conceptual design19
Solar sail momentum management with mass translation and reflectivity devices using predictive control19
Thrust measurements of microwave-, superconducting- and laser-type emdrives19
An integrated systematic method for interlaced unmanned spatial systems (IUSS) design process19
Investigation of influence factors to the reduction of hypersonic blunt-body drag and aeroheating based on a spike - aerodisk - Channel concept19
Experimental and Simulative Evaluation of a Reinforcement Learning Based Cold Gas Thrust Chamber Pressure Controller19
A novel concept on Mid Air Recovery of crew module19
The impact of cardiovascular deconditioning in space: A review19
Mission design of DESTINY+19
Thermal extraction of H2O(s) from lunar regolith simulant with concentrated solar irradiation: Experimental analysis19
Dynamics modeling and simulation analysis of a reusable high-pressure staged combustion LOX/kerosene variable thrust rocket engine19
Balancing differential drag with Coulomb repulsion in low earth orbit plasma wakes19
Predicting dynamic fragmentation characteristics from high-impact energy events utilizing terrestrial static arena test data and machine learning19
Historical space painting art: Its important role on the creation of space-age era in 1950s19
Feasibility studies for a dust observatory between earth and the asteroid belt19
Acceding to the Moon Agreement to acquire legal certainty: An optional solution for China in the new era of lunar exploration and exploitation19
From Antarctic prototype to ground test demonstrator for a lunar greenhouse19
0.066145896911621