Journal of Testing and Evaluation

Article	Citations
Magnetic Field Strength and Temperature Effects on the Behavior of Oil Well Cement Slurry Modified with Iron Oxide Nanoparticles and Quantified with Vipulanandan Models	35
New Vipulanandan p-q Model for Particle Size Distribution and Groutability Limits for Sandy Soils	33
Equivalence of Friction and Viscous Damping in a Spring-Friction System with Concave Friction Distribution	31
Direct Tension Test for Characterization of Tensile Behavior of Ultra-High Performance Concrete	31
Vipulanandan Constitutive Models to Predict the Rheological Properties and Stress–Strain Behavior of Cement Grouts Modified with Metakaolin	27
Material Characterization of GFRP Bars in Compression Using a New Test Method	21
On Designing Distribution-Free Homogeneously Weighted Moving Average Control Charts	20
Rheological Behavior and Thermal Conductivity of Graphite–Ethylene Glycol Nanofluid	19
Spatial Distribution of Corrosion Products Influenced by the Initial Defects and Corrosion-Induced Cracking of the Concrete	18
Investigation of Mechanical Properties of Mg5Sn-xZn Alloys Produced through New Method in Powder Metallurgy	17
Experimental Investigation on Microstructure and Permeability of Thermally Treated Beishan Granite	16
Effects of Brittleness on Crack Behaviors in Rock-Like Materials	15
Improvement of Solar Distiller Productivity by a Black Metallic Plate of Zinc as a Thermal Storage Material	15
Liquefaction Resistance of Different Size/Shape Sand-Clay Mixtures Using a Pair of Bender Element–Mounted Molds	14
Random Forest–Based Pavement Surface Friction Prediction Using High-Resolution 3D Image Data	14
Investigation of Surface Morphology and Topography Features on Abrasive Water Jet Milled Surface Pattern of SS 304	14
The Prediction of Road Cracks through Acoustic Signature: Extended Finite Element Modeling and Experiments	14
Effect of Evotherm-M1 on Properties of Asphaltic Materials Used at NAPMRC Testing Facility	14
Mechanical and Wear Properties of Aluminum-Based Nanocomposites Fabricated through Ultrasonic Assisted Stir Casting	13
Effects of Soil Conditioning on Tool Wear for Earth Pressure Balance Shield Tunneling in Sandy Gravel Based on Laboratory Test	13
Characterizing Compatibility of Crumb Rubber Modified Asphalt by Customized Drainage Method	13
Modified Bidirectional Dc-dc Boost Converter Fed Three-Phase Four-Wire PV-DVR	13
A Vibration-Based Traffic Monitoring System Using Distributed Optical Sensing Technology	13
Self-Sensing Carbon Nanotube-Cement Composite Material for Structural Health Monitoring of Pavements	13
Statistical Analysis of the Influence of Curing Time and Temperature on Compressive Strength of Sandy Soil Stabilized with Sustainable Binder	12

A Novel Oscillation-Free Force Measurement for the Determination of Material Properties during High-Speed Tests	12
Multi-scale In Situ Investigation of Infiltration Parameter in Pervious Concrete Pavements	12
Testing of Contact Stress at Ballast Bed-Soil Subgrade Interface under Cyclic Loading Using the Thin-Film Pressure Sensor	12
Preparation and Properties of Waterborne Epoxy–Modified Emulsified Asphalt Binder (WEMEAB)	11
Effect of Different Creep and Recovery Times on the MSCR Test for Highly Modified Asphalt Binder	11
Impact of Temperature Rise on the Seismic Performance of Concrete-Filled Double Skin Steel Columns with Prismatic Geometry	11
New Gear Fault Diagnosis Method Based on MODWPT and Neural Network for Feature Extraction and Classification	11
Monitoring Regularly Maintained Systems Based on the Renewal Process with Generalized Exponential Distribution of Time between Events	11
Surface Behavior of AISI H13 Alloy Steel Machining under Environmentally Friendly Cryogenic MQL with PVD-Coated Tool	11
Study on Workability and Skid Resistance of Bio-Oil–Modified Fog Seal with Sand	11
Short-Term Aging Performance Evaluation of Asphalt Based on Principal Component and Cluster Analysis	10
Dynamic Characteristics of Coarse Aggregates within Epoxy Asphalt Mixture during Superpave Gyratory Compaction	10
Investigations on Dynamic Mechanical Analysis and Crystalline Effect of Neem/Banyan Fiber–Reinforced Hybrid Polymer Composite	10
Permeability Characteristics of Poorly Graded Sand Conditioned with Foam in Different Conditioning States	10
Characterization of Freeze-Thaw Resistance of New-to-Old Concrete Based on the Ultrasonic Pulse Velocity Method	10
Performance Evaluation of Modified Solar Still Using Aluminum Foil Sheet as Absorber Cover – A Comparative Study	10
Performance Enhancement of MR Brake Using Flake-Shaped Iron-Particle–Based Magnetorheological Fluid	10
Modeling and Statistical Evaluations of Unconfined Compressive Strength and Compression Index of the Clay Soils at Various Ranges of Liquid Limit	9
Cryogenic and Aging Treatment Effects on the Mechanical Properties of Ti-15V-3Al-3Cr-3Sn Titanium Alloy	9
Simple Indexes to Identify Fatigue Performance of Asphalt Concrete	9
High-Temperature Performance and Workability of Crumb Rubber–Modified Warm-Mix Asphalt	9
Grid-Interconnected Solar Photovoltaic System for Power Quality Improvement Using Extended Reference Signal Generation Strategy	9
A Three-Dimensional Evaluation of Interface Shear Behavior between Granular Material and Rough Surface	9
Fuzzy Cost Optimization and Admission Control for Machine Interference Problem with General Retrial	9
Numerical Investigation on the Use of Flat-Jack Test for Detecting Masonry Deformability	9
Dynamic Response Analysis of Airport Asphalt Pavement Subjected to High-Temperature Jet Wake Based on Finite Element Simulation	8
Performance Evaluation of Hybrid Fibers and Nano-zeolite Modified Asphalt Micro-surfacing	8
Developments of Conductive Materials and Characteristics on Asphalt Concrete: A Review	8
Effects of Waste Polyethylene on the Rheological Properties of Asphalt Binder	8
Presentation of Predictive Models for Two-objective Optimization of Moisture and Fatigue Damages Caused by Deicers in Asphalt Mixtures	8
Ground Response due to Construction of Shallow Pipe-Jacked Tunnels in Sandy Soil: Laboratory Investigation	8
Understanding Soil Surface Water Content Using Light Reflection Theory: A Novel Color Analysis Technique Considering Variability in Light Intensity	8
Using the Dynamic Shear Rheometer for Low-Temperature Grading of Asphalt Binders	8
Experimental Investigation of Obliquely Incident Blast Wave Effect on Deflection of Running Cracks	8
The Optimum Pre-mixing Water Content in Asphalt Emulsion Mixture with Cement	8
Evaluation of Concrete Filled Steel Tube Column Confined with FRP	8
Some Practical Aspects of Digital Image Correlation Technique to Evaluate Anisotropy Coefficient and Its Comparison with Traditional Method	8
A Literature Review of Bitumen Aging: From Laboratory Procedures to Field Evaluation	7
Evaluation of the Effect of Exposure Duration and Fiber Content on the Mechanical Properties of Polypropylene Fiber-Reinforced UHPC Exposed to Sustained Elevated Temperature	7
Response of a High Damping Rubber Bearing to Multiaxial Excitation	7
Reliability of Different Test Setups and Influence of Mortar Mixture on the Fabric-Reinforced Cementitious Matrix-to-Brick Bond Response	7
Study on Acoustic Emission Characteristics and Failure Prediction of Post-High-Temperature Granite	7
Experimental Analysis on Creep Properties of Frozen Silty Mudstone Considering Conservation of Energy	7
The Testing Methods and Prediction Models for Concrete Corrosion in Sewer Pipelines: A State-of-the-Art Review	7
Laboratory Evaluation of Modified Asphalt Mixes Using Nanomaterial	7
Fabrication of Bimetal Aluminum-5 % Alumina-Bromine Composites by Warm Accumulative Roll Bonding	7
Shaking Table Test on Dynamic Damage Characteristics of Bedrock and Overburden Layer Slopes	7
Three-Dimensional Reconstruction and Morphological Characterization of Aggregates Using Imaging and Spherical Harmonics	7
Simulation and Detection Leakage of Underground Water Pipeline by Ground Penetrating Radar	7
Mechanical Properties of Warm Mix Asphalt–Stone Matrix Asphalt Modified with Nano Zeolite Material	7

Effect of Rubber Incorporation on the Behavior of Pavement Cemented Mixtures under Cyclic Flexural Loading: A Preliminary Study	7
Study on Binder Film Thickness Distribution of Recycled Asphalt Pavements	7
Microdrilling of AA (6351)-SiC-B4C Composite Using Hybrid Micro-ECDM Process	7
Reliability-Based Design Optimization of Chemically Stabilized Coal Gangue	7
Effects of BFRP Bar Diameter and Cover Thickness on Fracture Behavior of BFRP Bar–Reinforced Ecological High-Ductility Cementitious Composites	7
Ground Penetrating Radar Sensitivity to Marginal Changes in Asphalt Mixture Composition	7
Experimental Study of the Influence of Test Chamber Dimensions on Aggressive Intensity of the Cavitating Jet	7
Fatigue Damage Accumulation Model of 6082-T6 Aluminum Alloy in Conditions of Block Bending and Torsion	6
Testing and Modeling the Gradually Applying Compressive Stress to Measuring the Strain of Self-Compacted Cement Paste Using Vipulanandan p-q Model	6
The Effect of Shrinkage-Reducing Polycarboxylate Superplasticizers in Cement-Based Materials	6
Effect of Ground Granulated Blast Furnace Slag (GGBFS) on Mechanical Properties of Roller-Compacted Concrete Pavement	6
A Literature Review on Fuzzy Process Capability Analysis	6
Evaluation of the Role of Reclaimed Asphalt Pavement Preheating on Cracking Behavior of Hot Mix Asphalt Recycled Mixtures by Digital Image Analysis	6
Strength and Shrinkage Properties of Heat-Cured Fly Ash–Based Geopolymer Mortars Containing Fine Recycled Concrete Aggregate	6
Development of a Drop Weight Machine for Adhesive Joint Testing	6
Real-Time Data Analysis with Artificial Intelligence in Parts Manufactured by FDM Printer Using Image Processing Method	6
Evaluation on Feasibility of Carbon Black and Hindered Amine Light Stabilizer as UV-Resistant Additives of Asphalt Binder	6
Fatigue Behavior of Roller-Compacted Concrete Pavement Based on Full-Scale Fatigue Test	6
Characterization of Global and Local Damages in Composite Images Using Geometrical and Fourier-Hu Moment–Based Shape Descriptors	6
Permanent Deformation Evaluation and Instability Prediction of Semi-rigid Pavement Structure Using Accelerated Pavement Testing and Finite Element Method	6
Residual Properties of XD TMT Bars after Exposure to Elevated Temperatures	6
Breast Cancer Diagnosis Based on Feature Extraction Using Dynamic Models of Thermal Imaging and Deep Autoencoder Neural Networks	6
Process Optimization of Antimicrobial Treatment on Tencel Knit Fabrics Using Chitosan Biopolymer	6
Effect of Plural Spray Coating Process Parameters on Bonding Strength of Polyurea with Steel and Aluminum for Liquid Storage Applications	6
Dynamic Compressive Behavior of Asphalt Concrete Material under Impact Load	6
Forming Limit Diagram Prediction of AISI 304–St 12 Tailor Welded Blanks Using GTN Damage Model	6
Discrete Element Methods for Characterizing the Elastic Behavior of the Granular Particles	6
Multiple Stress Creep and Recovery Behavior of SBR-Modified Bitumen Emulsions	6
Testing Method of Rock Dynamic Fracture Toughness Using Large Single Cleavage Semicircle Compression Specimens	6
Measurement of Sample Tilt by Residual Imprint Morphology of Berkovich Indenter	5
Development of a Digital Twin of a Local Road Network: A Case Study	5
Using Polyphosphoric Acid and Sulfur to Improve Storage Stability, Aging, and Rheological Properties of High-Density Polyethylene–Modified Asphalt Binder	5
Mining the Student Dropout in Higher Education	5
Feasibility of Improving the Mechanical Properties of Concrete Pavement Using Basalt Fibers	5
Visual and MSR Grades of Lumber Are Not 2-parameter Weibulls and Why This May Matter	5
Effects of Physical Hardening on Low-Temperature Properties of Asphalt Binders Containing Reclaimed Asphalt Pavement	5
Displacement-Based Simplified Calculation for Pile-Soil Interaction under Reciprocating Low-Cycle Pseudo-Static Loads	5
State-Dependent Behavior of a Crushable Sand in Drained Triaxial Tests	5
Testing and Performance Evaluation of Vegetable-Oil–Based Hybrid Nano Cutting Fluids	5
Development and Application of a Performance Evaluation Matrix: A Case Study on Exploring the Items Considered Critical to Quality	5
Effect of Modified Phosphogypsum on Properties of Cement Mortar	5
Investigation of Tensile, Viscoelastic, and Viscoplastic Behavior of Polylactic Acid Manufactured by Fused Deposition Modeling	5
Physio-Mechanical Characterization of Rocks	5
Optimization of Thermal Modeling Using Machine Learning Techniques in Fused Deposition Modeling 3-D Printing	5
Experimental and Numerical Investigation of Single Fiber Pull-Out Tests of Steel Macro-Fiber and Glass Micro-Fiber in a Cementitious Matrix	5
Evaluation of the Effects of Engineered Crumb Rubber (ECR) on Asphalt Mixture Characteristics	5
A Contribution of the Analysis of the Road Macrotexture and Microtexture Roles vis-à-vis Skid Resistance	5
Detection of Concrete Structural Defects Using Impact Echo Based on Deep Networks	5
Consolidation and Hydraulic Conductivity of High-Plastic Clay Reinforced with Waste Tire Fibers	5
Response of Concrete to Incremental Aggression of Sulfuric Acid	5
Experimental and Numerical Investigation of Residual Stress in Coatings on Steel	5
Preparation and Properties of Microwave-Absorbing Asphalt Mixtures Containing Graphite and Magnetite Powder	5
Experimental Study on Embankment Failure Law and Reinforcement Technology for Highway Widening Project over Silt Soils	5
Factors Influencing the Pore Structure Parameters of Lightweight Cement-Based Foams	5
Experimental Study of the Mechanism of TBM Disk Cutter Penetration in Mixed-Faced Grounds under Confining Pressure	5
Hydromechanical Performance of Heat-Treated Bentonite	5
Performance Evaluation of Ant Lion Optimizer–Based PID Controller for Speed Control of PMSM	5
Critical Evaluation of Dynamic Shear Rheometer (DSR)-Based Methods to Measure Asphalt Binder Diffusion	5
Influence of Clinker and SCMs on Soluble Chemicals and Expansion of Phosphogypsum-Based Cementitious Materials	5
Development of a Thermo-Hydro-Mechanical Device for Wood Densification Adaptable to Universal Testing Machines and Its Evaluation in a Tropical Species	5
Investigating the Deformation Property of Weathered Phyllite Filling Subgrade	5
Adaptive Neuro-Fuzzy Inference System to Predict the Release of Microplastic Fibers during Domestic Washing	5
Termite Testing Methods: A Global Review	5
Experimental and Theoretical Analysis of Stress Superposition in Double-Hole Blasts	5
Solar Heat Reflective Coating for Sidewalks Considering Cooling Effect, Anti-Skid Performance, and Human Comfort	5
Statistical Test of Two Taguchi Six-Sigma Quality Indices to Select the Supplier with Optimal Processing Quality	5
Development and Application of a Multifunction True Triaxial Rock Drilling Test System	5
Effect of Inertia Forces on Contact State of Ball Bearing with Local Defect in Outer Raceway	5
Automatic Vehicle Tracking with LiDAR-Enhanced Roadside Infrastructure	4
An Experimental Investigation on the Mechanism of Contact Erosion in Levee Foundations Considering the Characteristics of Particle Shape and Flow Field	4
Experimental Evaluation of Ball Bearing Performance Using Nanoflake-Blended Greases	4
Evaluating the Rutting Resistance of Wearing Course Mixtures with Different Fine Aggregate Sources Using the Indirect Tensile Strength Test	4
A Dynamic Segregation Test Method for Heavyweight Concrete: Density Variation Method	4
Wireless Sensor Network–Based Structural Health Monitoring of Bridges Using Advanced Signal Processing Techniques	4
Geometric Reliability Analysis of Composite Foundations Comprising Cement–Fly Ash–Gravel Piles at Site-Specific Scale	4
Effects of Curing Temperature and Dosage on the Performance of GGBS-MgO-CaO in Stabilizing/Solidifying Heavy Metal–Contaminated Site Soil	4
Investigation on the Shear Behavior of Rough Rock Joints Prepared by Three-Dimensional Engraving Technique	4
Analysis of Vibro-Acoustic Path for Quantification of Tire-Pavement Interaction Noise Using a Two-Wheeler	4
A New Hybrid Input Strategy to Reproduce Across-Fault Ground Motions on Multi-Shaking Tables	4
A Modified Approach for Six Sigma Quality Assessment of Product with Multiple Characteristics in Intelligent Manufacturing Environments	4

Influence of the Load and Time Conditions on the Results of the Static Plate Load Test	4
Modeling Lane-Change Risk in Urban Expressway Off-Ramp Area Based on Naturalistic Driving Data	4
Investigation on Microwave Heating Technology for Rutting Maintenance in Asphalt Pavement	4
Variable Sampling Interval Control Charts for Monitoring the Ratio of Two Normal Variables	4
Development of Crack Arrest Temperature Test Method by Using a Local Temperature Gradient	4
Experimental Study on Concrete Fracture Process Zone Using Digital Image Correlation Technique	4
Investigation on Indirect Tensile Test of Asphalt Mixture Based on the Discrete Element Method	4
Fatigue Performance Analysis of GRE Composite Pipes by Conducting Tension-Tension Tests on the Rings Cut from the Pipe	4
Synthesis and Utilization of Mesoporous Hollow Silica Particles for Bitumen	4
Experimental Study on Influencing Factors Associated with a New Tunnel Waterproofing for Improved Impermeability	4
Evaluation of Antimicrobial, Antioxidant, and Cytotoxicity Activities of CuO Nanopellets Synthesized by Surfactant-Free Hydrothermal Method	4
Modified Calculations of Lateral Displacement and Soil Pressure of Pile Considering Pile–Soil Interaction under Cyclic Loads	4
An Experimental Study of the Effects of Different Reinforcement Ratios on the Impact Resistance Behaviors of Reinforced Concrete Beams	4
Shear Moduli of Metal Specimens Using Resonant Column Tests	4
The Effect of a Chemical Warm Mix Additive on the Self-Healing Capability of Bitumen	4
Queuing Strategy in Deep-Ocean Assessment and Reporting of Tsunamis (DART)	4
Evaluation of Biostimulation Efficacy on the Reinforcement of Calcareous Sand	4
On Reliability in a Multicomponent Stress-Strength Generalized Rayleigh Model Based on Record Values	4
Cellulose-Based Hydrogels as Smart, Green and Controllable Nitrogenous Fertilizers Releasing Agents	4
Mechanistic-Empirical Compatible Traffic Data Generation: Portable Weigh-in-Motion versus Cluster Analysis	4
Effect of Unloading Direction on Rock Failure under True Triaxial Stress Conditions	4
Extraction of Micro, Nanocrystalline Cellulose and Textile Fibers from Coffee Waste	4
Experimental Study on Road Base Material of Geopolymer Recycled Concrete	4
Effects of Phosphogypsum and Calcined Phosphogypsum Content on the Basic Physical and Mechanical Properties of Portland Cement Mortar	4
Nonparametric Testing for Unknown Age (UBAL) Class of Life Distribution	4
Macro Thermogravimetric Analyzers: Versatile and Underutilized Analytical Instruments	4
On the Use of Microscale Abrasion Test for Determining the Particle Abrasivity	4
A New Distribution-Free Control Chart for Monitoring Process Median Based on the Statistic of the Sign Test	4
“Simplified” Cracking Tests: Evaluation of the IDEAL-CT Performed Using a Marshall Testing Platform	4
A Study on Fatigue Behaviors of Concrete under Uniaxial Compression: Testing, Analysis, and Simulation	4
Foam Concrete Pore Structure Effect on Drying Shrinkage and Frost Resistance	4
Self-Monitoring of Damage Evolution in Asphalt Concrete Based on Electrical Resistance Change Method	4
Distributed Strain Sensing to Study a Composite Liner for Cast Iron Water Pipe Rehabilitation	4
Fatigue Performance of Polyamide 12 Additively Manufactured Structures Designed with Topology Optimization	4
Assessing the Medical Staff’s Overall Satisfaction of Patient Safety Culture from a Regional Teaching Hospital in Taiwan	4
New Method of Monitoring Tunnel Feet-Lock Pipe (TFP) Mechanics Using Fiber Bragg Grating (FBG)	4
Strength, Elastic Modulus, and Creep of High-Strength Concrete Produced with Bagasse Ash and Recycled Concrete Aggregate	4
Photon Interaction Properties of Different Bones from Human Body Using MCNPX, WinXCom, XMuDat, and Auto-Zeff Programs	3
Characteristics of Forces in Plane Polishing Based on the Magnetorheological Effect with Dynamic Magnetic Fields Formed by Rotating Magnetic Poles	3
Evaluation of High-Temperature Performance Indexes of Anti-rutting Asphalt Mixture	3
Centrifuge Modeling of Geogrid-Reinforced and Rammed Soil-Cement Column-Supported Embankment on Soft Soil	3
Regional Characteristics of Deformation and Failure of Coal and Rock under Local Loading	3
A Simulation-Based Method to Detect Mechanical Parameters of I-Beams and Hollow Cylinders	3
Black Space Rheological Assessment of Asphalt Material Behavior	3
Compounding Optimization of SBS-SBR High-Viscosity Modifier and Rejuvenation of Aged SBS-SBR Modified Asphalt	3
Effects of Bending Radius and Fiber-Crack Angle on Polymer Optical Fiber Loss for Potential Application in Pavement Crack Monitoring	3
Effect of Chemical Components of Asphalt Binders on Fatigue Resistance of Binder and Asphalt Mixtures in High Reclaimed Asphalt Pavement Mixtures	3
Performance Evaluation of Lime, Cement and Alkali-Activated Binder in Fiber-Reinforced Expansive Subgrade Soil: A Comparative Study	3
Ratcheting Examination of 1045 Notched Steel Plates under Low-High and High-Low Sequences	3
Characterization of Mechanical Properties of 3-D–Printed Materials Using the Asymmetric Four-Point Bending Test and Virtual Fields Method	3
An Alternative Method for the Invariant Threshold Force Evaluation in Incremental Step Loading Tests	3
Effect of Fiber Composition on the Physical, Mechanical, and Thermal Behavior of Jute and Human Hair–Reinforced Epoxy Composites	3
The Deterioration of Cement Mortar under the Coupled Conditions of Stray Current and Sulfate	3
3D Image Analysis of Sports Technical Features and Sports Training Methods Based on Artificial Intelligence	3
Correlation between Stiffness and Fatigue Behavior at Asphalt Mastic and Asphalt Mixture Level	3
Damage Accumulation in a Novel High-Throughput Technique to Characterize High Cycle Fatigue	3
Study on the Influence of Different Aqueous Solutions on the Mechanical Properties and Microstructure of Limestone	3
Preparation and Investigation of Novel Diatomite-Supported Epoxy Resin–Modified Asphalt Binder	3
Influence of Loading Pressure and Sample Preparation on Ionic Concentration and Resistivity of Pore Solution Expressed from Concrete Samples	3
A New Evaluation of Video Encryption Security with a Perceptual Metric	3
A Nondestructive EIS Method to Evaluate the Compressive Strength of Slag-Blended Cement Paste under Steam Curing	3
Development and Application of Triaxial Apparatus for Soil with High Bearing Pressure by Computed Tomography	3
Infrared Thermal Imaging for Intelligent Leakage Detection in Underground Integrated Pipe Corridors	3
Retraction: Analysis of the Promotion Effect of China’s Financial Venture Capital Development on Innovative Capital	3
Mechanical Properties and Durability of Mortars Made with Organic-Inorganic Repair Material	3
Rheological Behaviors of Waste Polyethylene Modified Asphalt Binder: Statistical Analysis of Interlaboratory Testing Results	3
Ultra-Low Density Foam Concrete Production Using Electrolyzed Water	3
Discrimination and Prediction of Tool Wear State Based on Gray Theory	3
Tool-Work Contact Ratio and Parametric Influence in Ultrasonic Vibration–Assisted Turning of Ti6Al4V Alloy	3
Bayesian Inference Based on Multiply Type-II Censored Samples of Sequential Order Statistics from Pareto Distribution	3
Effect of Slenderness Ratio of the Specimen on Resonant Column Test Results	3
Comparison and Harmonization of the Locked-Wheel Skid Tester and the Sideway-Force Coefficient Routine Investigation Machine	3
Sustainable Development with Microsurfacing: A Review	3
Design of Medical Graphic Aided Visual Elements Active Communication Algorithm in Print Advertising	3
Evaluation of Calibration Procedures of British Pendulum Tester	3
Effect of Aging on the Rheological Behaviors of SBS-Modified Asphalt with Thermochromic Materials	3
Design of Multiple Dependent State Repetitive Group Sampling Plans Based on Exponentiated Exponential Distribution	3
The Development and Application of Multimedia Technology in College Gymnastics Teaching	3
Performance Evaluation of High Modulus Asphalt Concrete (HMAC) Prepared Using Asphaltenes-Modified Binders	3
Evaluation and Development of Performance-Engineered Specifications for Monotonic Loading Cracking Performance Assessment Tests and Indicators	3
Discrete Element Analysis of Indirect Tensile Test Based on Image Processing with Annular Segmentation and Bimodal Threshold	3
Volumetric Dilatometer Study of Thermoreversible Aging Properties in Crumb Rubber–Modified Asphalt Binders	3
Design, Fabrication, and Experiments of a Soft Pneumatic Gripper with Closed-Loop Position Control	3
A Review of Factors Influencing Rolling Shear in CLT and Test Methodology	3
Fire Water Monitor Trajectories Based on Turbulence Breakup Model	3
Discrete Element Modeling of Vibration Compaction Effect of the Vibratory Roller in Roundtrips on Gravels	3
Early-Age Cracking Potential of Fly Ash High Performance Concrete Internally Cured with Super Absorbent Polymers	3
Analysis of Phase Transformation and Mechanical Properties of 55CrMo Steel during Induction Hardening	3
Automating Equipment towards Industry 4.0: A New Concept for a Transfer System of Lengthy and Low-Stiffness Products for Automobiles	3
Dynamic Properties of Human Hair Fiber–Reinforced Yamuna Sand	3
Effect of Key Aggregate Morphology and Mold Modulus on the Spatial Distribution of Internal Air Voids in the Compacted Asphalt Mixture	3
Correlation Analysis of Machine Performance Parameters and Rock Mass Properties during Tunnel Boring Machine Excavation Process: A Case Study in Yin-song Headrace Tunnel, China	3
Experimental Evaluation of a Microwave Drilling Process in Perspex	3
A Proposed Evaluation Method for Three-Point Beam Tests of Fiber-Reinforced Concrete	3
Multiple Stress Creep Recovery Test to Differentiate Polymer Modified Bitumen at High Temperature	3