Ultrasonics

Papers
(The TQCC of Ultrasonics is 9. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-02-01 to 2024-02-01.)
ArticleCitations
A review of ultrasonic testing applications in additive manufacturing: Defect evaluation, material characterization, and process control165
Environmental and operational conditions effects on Lamb wave based structural health monitoring systems: A review126
So you think you can DAS? A viewpoint on delay-and-sum beamforming117
Shear horizontal wave transducers for structural health monitoring and nondestructive testing: A review93
A critical review on ultrasonic-assisted fouling control and cleaning of fouled membranes65
Improved forward model for quantitative pulse-echo speed-of-sound imaging59
A generic deep learning framework to classify thyroid and breast lesions in ultrasound images58
Combined two-level damage identification strategy using ultrasonic guided waves and physical knowledge assisted machine learning57
A review of recent advances in the single- and multi-degree-of-freedom ultrasonic piezoelectric motors49
Nonlinear ultrasonics-based technique for monitoring damage progression in reinforced concrete structures41
A nonlinear ultrasonic SHM method for impact damage localisation in composite panels using a sparse array of piezoelectric PZT transducers39
Ultrasound-based identification of damage in wind turbine blades using novelty detection35
Real time SVD-based clutter filtering using randomized singular value decomposition and spatial downsampling for micro-vessel imaging on a Verasonics ultrasound system35
Diffuse ultrasonic wave-based structural health monitoring for railway turnouts34
High-resolution Lamb waves dispersion curves estimation and elastic property inversion32
Laser Ultrasonic inspection of a Wire + Arc Additive Manufactured (WAAM) sample with artificial defects32
Finite element simulation and experimental investigation of residual stresses in ultrasonic assisted turning32
Investigating ultrasound-induced acoustic softening in aluminum and its alloys32
A softmax classifier for high-precision classification of ultrasonic similar signals32
Microbiological properties of poultry breast meat treated with high-intensity ultrasound31
Adaptive attenuation correction during H-scan ultrasound imaging using K-means clustering29
Evolution of acoustic softening effect on ultrasonic-assisted micro/meso-compression behavior and microstructure29
Defect reconstruction by non-destructive testing with laser induced ultrasonic detection29
Recent applications of ultrasonic waves in improved oil recovery: A review of techniques and results29
Hidden corrosion detection using laser ultrasonic guided waves with multi-frequency local wavenumber estimation28
Simulation and experimental study of ultrasonic cutting for aluminum honeycomb by disc cutter28
Modeling and simulation of backward combined harmonic generation induced by one-way mixing of longitudinal ultrasonic guided waves in a circular pipe28
Effect of radial high-speed ultrasonic vibration cutting on machining performance during finish turning of hardened steel27
A single-modal linear ultrasonic motor based on multi vibration modes of PZT ceramics27
Active source localization in wave guides based on machine learning26
Temperature prediction of ultrasonic vibration-assisted milling26
CNN-LSTM network-based damage detection approach for copper pipeline using laser ultrasonic scanning26
Online acoustic emission source localization in concrete structures using iterative and evolutionary algorithms26
Tumor segmentation in automated whole breast ultrasound using bidirectional LSTM neural network and attention mechanism26
Towards using convolutional neural network to locate, identify and size defects in phased array ultrasonic testing25
Therapeutic ultrasound experiments in vitro: Review of factors influencing outcomes and reproducibility25
Modal analysis and moving performance of a single-mode linear ultrasonic motor25
The complexity of surface acoustic wave fields used for microfluidic applications25
Design of a resonant Luneburg lens for surface acoustic waves24
Magneto-sonothrombolysis with combination of magnetic microbubbles and nanodroplets24
Ultrasonic elastography to assess biomechanical properties of the optic nerve head and peripapillary sclera of the eye24
Fractal characterization of surface microtexture of Ti6Al4V subjected to ultrasonic vibration assisted milling24
An improved nonlinear ultrasonic technique for detecting and monitoring impact induced damage in composite plates24
Multi-parameter reconstruction of velocity and density using ultrasonic tomography based on full waveform inversion24
Supervised learning strategy for classification and regression tasks applied to aeronautical structural health monitoring problems23
Nondestructive evaluation of steel-concrete composite structure using high-frequency ultrasonic guided wave23
Calculation of geometric flow profile correction factor for ultrasonic flow meter using semi-3D simulation technique22
Effect of ultrasonic shot peening duration on microstructure, corrosion behavior and cell response of cp-Ti22
In situ disbond detection in adhesive bonded multi-layer metallic joint using time-of-flight variation of guided wave22
3D normalized cross-correlation for estimation of the displacement field in ultrasound elastography22
Rayleigh wave propagation in a homogeneous centrosymmetric flexoelectric half-space22
Complete phononic band gaps in the 3D Yablonovite structure with spheres22
A multi-pillar piezoelectric stack transducer for nanodroplet mediated intravascular sonothrombolysis22
Damage characterization using CNN and SAE of broadband Lamb waves22
Research on the influence of heat treatment on residual stress of TC4 alloy produced by laser additive manufacturing based on laser ultrasonic technique22
An ultrasonic guided wave excitation method at constant phase velocity using ultrasonic phased array probes21
An amplitude prediction model for a giant magnetostrictive ultrasonic transducer21
Segmented analysis of time-of-flight diffraction ultrasound for flaw detection in welded steel plates using extreme learning machines21
The acoustic radiation force of a focused ultrasound beam on a suspended eukaryotic cell21
Surface/sub-surface crack-scattered nonlinear rayleigh waves: A full analytical solution based on elastodynamic reciprocity theorem21
Experimental identification of high order Lamb waves and estimation of the mechanical properties of a dry human skull21
FEM simulation and comparison of PMN-PT single crystals based phased array ultrasonic transducer by alternating current poling and direct current poling21
Cure monitoring and damage identification of CFRP using embedded piezoelectric sensors network21
Deconvolution of ultrasonic signals using a convolutional neural network21
Multi-frequency localized wave energy for delamination identification using laser ultrasonic guided wave20
A reverse time migration-based multistep angular spectrum approach for ultrasonic imaging of specimens with irregular surfaces20
Nonlinear mixing of non-collinear guided waves at a contact interface20
A high-sensitivity and long-distance structural health monitoring system based on bidirectional SH wave phased array20
Determining the crystallographic orientation of hexagonal crystal structure materials with surface acoustic wave velocity measurements20
Residual stress relief of welded aluminum alloy plate using ultrasonic vibration20
A review on guided-ultrasonic-wave-based structural health monitoring: From fundamental theory to machine learning techniques20
Value of homodyned K distribution in ultrasound parametric imaging of hepatic steatosis: An animal study19
Flexible ultrasonic array for breast-cancer diagnosis based on a self-shape–estimation algorithm19
Development and validation of low-intensity pulsed ultrasound systems for highly controlled in vitro cell stimulation19
Quantitative defect inspection in the curved composite structure using the modified probabilistic tomography algorithm and fusion of damage index19
A modelling framework for simulation of ultrasonic guided wave-based inspection of welded rail tracks18
An efficient Lamb wave-based virtual refined time-reversal method for damage localization in plates using broadband measurements18
Ultrasonic mapping of hybrid additively manufactured 420 stainless steel18
Three-dimensional damage quantification of low velocity impact damage in thin composite plates using phased-array ultrasound18
Imaging damage in plate waveguides using frequency-domain multiple signal classification (F-MUSIC)18
Multi-objective optimization for joint actuator and sensor placement for guided waves based structural health monitoring using fibre Bragg grating sensors18
Measurement of local pulse wave velocity for carotid artery by using an ultrasound-based method18
Quantifying adhesive thickness and adhesion parameters using higher-order SH guided waves18
Fully noncontact inspection of closed surface crack with nonlinear laser ultrasonic testing method18
A review of ultrasonic sensing and machine learning methods to monitor industrial processes18
Sim-to-Real: Employing ultrasonic guided wave digital surrogates and transfer learning for damage visualization18
Recent advances in vascular ultrasound imaging technology and their clinical implications18
Ultrasound super-resolution imaging with a hierarchical Kalman tracker17
The zero-frequency component of bulk waves in solids with randomly distributed micro-cracks17
In-situ ultrasound-assisted control of polymeric membrane fouling17
Discrimination of nano-objects via cluster analysis techniques applied to time-resolved thermo-acoustic microscopy17
Study of a spiral-coil EMAT for rail subsurface inspection17
Proposal for a novel elliptical ultrasonic aspirator and its fundamental performance in cartilage removal17
Parameter estimation of the homodyned K distribution based on an artificial neural network for ultrasound tissue characterization17
Lamb wave-based mapping of plate structures via frontier exploration17
Inversion of surface damage and residual stress in ground silicon wafers by laser surface acoustic wave technology17
DSWE-Net: A deep learning approach for shear wave elastography and lesion segmentation using single push acoustic radiation force16
Ring-shaped traveling wave ultrasonic motor for high-output power density with suspension stator16
Influence of microstructural grain-size distribution on ultrasonic scattering16
Modeling lamb wave propagation in visco-elastic composite plates using a fifth-order plate theory16
A baseline-free approach of locating defect based on mode conversion and the reciprocity principle of Lamb waves16
The effects of temperature and frequency dispersion on sound speed in bulk poly (vinyl alcohol) poly (N-isopropylacrylamide) hydrogels caused by the phase transition16
MR relaxation properties of tissue-mimicking phantoms16
Analytical and numerical investigations of one-way mixing of Lamb waves in a thin plate16
Elastic stubbed metamaterial plate with torsional resonances16
A metamaterial ultrasound mode convertor for complete transformation of Lamb waves into shear horizontal waves16
Investigation of thermo-acoustoelastic guided waves by semi-analytical finite element method16
Development of in-bore magnetostrictive transducer for ultrasonic guided wave based-inspection of steam generator tubes of PFBR16
Quantitative assessment of media concentration using the Homodyned K distribution15
Structural design of an acoustic planar array transducer by using the equivalent circuit method15
Measurement of fastening force using dry-coupled ultrasonic waves15
Mode conversion of SH guided waves with symmetry inversion in plates15
Deep reconstruction of high-quality ultrasound images from raw plane-wave data: A simulation and in vivo study15
Investigations on a mathematical model for optimum impedance compensation of a giant magnetostrictive ultrasonic transducer and its resonance characteristics15
Deep learning approach to skin layers segmentation in inflammatory dermatoses15
Characterization of a soft tissue-mimicking agar/wood powder material for MRgFUS applications15
Ultrasound deep learning for monitoring of flow–vessel dynamics in murine carotid artery15
Long-distance structural health monitoring of buried pipes using pitch-catch T(0,1) wave piezoelectric ring array transducers15
Application of the reciprocity principle to evaluation of mode-converted scattered shear horizontal (SH) wavefields in tapered thinning plates15
Probing the limits of full-field linear local defect resonance identification for deep defect detection15
Deep learning inversion with supervision: A rapid and cascaded imaging technique15
Broad bandwidth air-coupled micromachined ultrasonic transducers for gas sensing15
Characterization of heat transfer and friction loss of water turbulent flow in a narrow rectangular duct under 25–40 kHz ultrasonic waves15
Time-frequency analysis of laser-excited surface acoustic waves based on synchrosqueezing transform15
Local damage detection by nonlinear coda wave interferometry combined with time reversal15
Research on ultra-low speed driving method of traveling wave ultrasonic motor for CMG15
High frequency ultrasound nonlinear scattering from porphyrin nanobubbles15
The research on propagation characteristics of acoustic emission signals in stiffened plates based on the multipath propagation model15
Numerical simulation on the generation of ultrasound and formation of water fog in the ultrasonic gas atomizer14
High-frequency vibration effects on the hole integrity in rotary ultrasonic drilling of carbon fiber-reinforced plastic composites14
The fundamental ultrasonic edge wave mode: Propagation characteristics and potential for distant damage detection14
High performance drilling of T800 CFRP composites by combining ultrasonic vibration and optimized drill structure14
Quick and repeatable shear modulus measurement based on torsional resonance using a piezoelectric torsional transducer14
Particle size distribution analysis of oil-in-water emulsions using static and dynamic ultrasound scattering techniques14
Influences of microparticle radius and microchannel height on SSAW-based acoustophoretic aggregation14
100 MHz bandwidth planar laser-generated ultrasound source for hydrophone calibration14
Weighted non-linear beamformers for low cost 2-element receive ultrasound imaging system14
Surface circular-arc defects interacted by laser-generated Rayleigh wave14
An improved method to estimate ultrasonic absorption in agar-based gel phantom using thermocouples and MR thermometry14
Ultrasonic moulding: Current state of the technology14
Corrosion monitoring using a new compressed sensing-based tomographic method14
A multi-degree-of-freedom clamping type traveling-wave ultrasonic motor14
Modeling and simulation of static component generation of Lamb wave propagation in a layered plate14
Experiments and modelling of ultrasonic waves in composite plates under varying temperature14
Propagation characteristics of ultrasonic weld-guided waves in Friction stir welding joint of same material14
Dispersion curve calculation in viscoelastic tissue-mimicking materials using non-parametric, parametric, and high-resolution methods13
On the threshold of 1/2 order subharmonic emissions in the oscillations of ultrasonically excited bubbles13
Acoustic impedance measurement of tissue mimicking materials by using scanning acoustic microscopy13
Longitudinal effects of low-intensity pulsed ultrasound on osteoporosis and osteoporotic bone defect in ovariectomized rats13
Low-frequency Lamb wave mixing for fatigue damage evaluation using phase-reversal approach13
Eigenspace-based minimum variance beamformer combined with sign coherence factor: Application to linear-array photoacoustic imaging13
Minimally invasive therapeutic ultrasound: Ultrasound-guided ultrasound ablation in neuro-oncology13
Deep learning-based anomaly detection from ultrasonic images13
Ultrasonic image denoising using machine learning in point contact excitation and detection method13
Ultrasonic-promoted rapid transient liquid phase bonding of high volume fraction SiC particle reinforced aluminum-based metal matrix composite in low temperature13
Damage identification using wave damage interaction coefficients predicted by deep neural networks13
Eigenfrequency characterization and tuning of Ti-6Al-4V ultrasonic horn at high temperatures for glass molding13
Summation of high-frequency Langevin transducers vibrations for increasing of ultrasonic radiator power13
Damage localization in piezo-ceramic using ultrasonic waves excited by dual point contact excitation and detection scheme13
Contact modeling and performance evaluation of ring type traveling wave ultrasonic motors considering stator teeth13
Non-contact measurement of the thickness of a surface film using a superimposed ultrasonic standing wave13
Speed of sound ultrasound transmission tomography image reconstruction based on Bézier curves12
The influence of osmotic treatment assisted by ultrasound on the physico-chemical characteristics of blueberries (Vaccinium myrtillus L.)12
Theoretical and experimental evaluation of the health status of a 1018 steel I-beam using nonlinear Rayleigh waves: Application to evaluating localized plastic damage due to impact loading12
Improvement mechanism of energy conversion efficiency in ultrasonic motor with flexible rotor12
Study on multi-frequency characteristics of a longitudinal ultrasonic transducer with stepped horn12
Joint segmentation and classification of breast masses based on ultrasound radio-frequency data and convolutional neural networks12
Non-contact imaging of subsurface defects using a scanning laser source12
Continuous ultrasonic flow measurement for aerospace small pipelines12
Optimizing the placement of piezoelectric wafers on closed sections using a genetic algorithm – Towards application in structural health monitoring12
Can ultrasound attenuation measurement be used to characterise grain statistics in castings?12
Ultrasonic focusing with mesoscale polymer cuboid12
Superposition model of mode shapes composed of travelling torsional guided waves excited by multiple circular transducer arrays in pipes12
Cavitation effect in two-dimensional ultrasonic rolling process12
Effect of porosity on the statistical amplitude distribution of backscattered ultrasonic pulses in particulate reinforced metal-matrix composites12
A technique based on nonlinear Hanning-windowed chirplet model and genetic algorithm for parameter estimation of Lamb wave signals12
Benchmark methodological approach for the application of artificial intelligence to lung ultrasound data from COVID-19 patients: From frame to prognostic-level12
Experimental realization of ultrasonic retroreflection tweezing via metagratings12
Generalised bisection method for optimum ultrasonic ray tracing and focusing in multi-layered structures12
Microstructure and mechanical properties of dissimilar NiTi and 304 stainless steel joints produced by ultrasonic welding12
Experimental and numerical determination of the wave dispersion characteristics of complex 3D woven composites11
Adaptive signal decomposition and dispersion removal based on the matching pursuit algorithm using dispersion-based dictionary for enhancing damage imaging11
Biometric recognition through 3D ultrasound hand geometry11
New modification of the acoustic Lamb waves and its application for liquid and ice sensing11
Generation of a mode in phononic crystal based on 1D/2D structures11
3D printed calibration micro-phantoms for super-resolution ultrasound imaging validation11
Cubic nonlinearity parameter measurement and material degradation detection using nonlinear ultrasonic three-wave mixing11
Experimental observation of static component generation by Lamb wave propagation in an elastic plate11
MAEF-Net: Multi-attention efficient feature fusion network for left ventricular segmentation and quantitative analysis in two-dimensional echocardiography11
Remote characterization of surface slots by enhanced laser-generated ultrasonic Rayleigh waves11
A fast full-wave solver for calculating ultrasound propagation in the body11
Interference-based amplification for CW laser-induced photoacoustic signals11
A unified deep network for beamforming and speckle reduction in plane wave imaging: A simulation study11
Acoustic-resolution photoacoustic microscope based on compact and low-cost delta configuration actuator11
Inversion methodology for ultrasonic characterization of polycrystals with clusters of preferentially oriented grains11
Smart responsive-calcium carbonate nanoparticles for dual-model cancer imaging and treatment11
Generating ultrasonic images indistinguishable from real images using Generative Adversarial Networks11
Development of a noninvasive HIFU treatment for breast adenocarcinomas using a toroidal transducer based on preliminary attenuation measurements11
Improved ultrasound image quality with pixel-based beamforming using a Wiener-filter and a SNR-dependent coherence factor11
CT2US: Cross-modal transfer learning for kidney segmentation in ultrasound images with synthesized data11
Electro-mechanical coupling band gaps of a piezoelectric phononic crystal Timoshenko nanobeam with surface effects11
Low-intensity pulsed ultrasound enhances bone marrow-derived stem cells-based periodontal regenerative therapies10
Ultrasonic frequency mixing via local defect resonance for defect imaging in composites10
Advanced numerical simulations considering crack orientation for fatigue damage quantification using nonlinear guided waves10
Freehand and video-rate all-optical ultrasound imaging10
Noninvasive calibrated tissue temperature estimation using backscattered energy of acoustic harmonics10
Evaluation of stiffness loss of reinforced concrete beams using the diffuse ultrasound method10
Automated seeding for ultrasound skin lesion segmentation10
Effect of targeted gold nanoparticles size on acoustic cavitation: An in vitro study on melanoma cells10
An in vitro study on the antitumor effect of sonodynamic therapy using sinoporphyrin sodium on human glioblastoma cells10
Development of high frequency piezocomposite with hexagonal pillars via cold ablation process10
Thin film Gallium nitride (GaN) based acoustofluidic Tweezer: Modelling and microparticle manipulation10
Effects of translational motion on the Bjerknes forces of bubbles activated by strong acoustic waves10
Acoustic analysis of ultrasonic assisted soldering for enhanced adhesion10
Floquet wave theory-based time-corrected ultrasonic total focusing method for fiber-reinforced composite laminate10
Laser ultrasonic imaging of complex defects with full-matrix capture and deep-learning extraction10
Characteristics of high-temperature equipment monitoring using dry-coupled ultrasonic waveguide transducers10
Theoretical and experimental investigation of circumferential guided waves in orthotropic annuli10
High-intensity ultrasound irradiation promotes the release of extracellular vesicles from C2C12 myotubes10
Effects of knurl tooth angle on mechanical and thermal behaviors of aluminum ultrasonic welding10
Integrated performance improvement for a bimodal linear ultrasonic motor using a dual-frequency asymmetric excitation method10
Ultrasonic wireless power links for battery-free condition monitoring in metallic enclosures10
Ultrasonic drilling for the characterisation of building stones and salt induced decay10
Design and analysis of an ultrasonic tactile sensor using electro-mechanical analogy9
Fitting analysis and research of measured data of SAW yarn tension sensor based on PSO–SVR model9
Two-dimensional scattering features of the mixed second harmonic A0 mode Lamb waves for incipient damage localization9
A novelly universal theory: Toward accurately evaluating radial vibration characteristics for radially sandwiched spherical piezoelectric transducer9
Ultrasonic autofocus imaging of internal voids in multilayer polymer composite structures9
Heavy metals biosensor based on defective one-dimensional phononic crystals9
Fast linear least-squares method for ultrasound attenuation and backscatter estimation9
Transfer learning for process monitoring using reflection-mode ultrasonic sensing9
Temporal and spectral characteristics of the impulsive waves produced by a clinical ballistic shock wave therapy device9
Synergistic effects of ultrasonic irradiation and α-Fe2O3 nanoparticles on the viscosity and thermal properties of an asphaltenic crude oil and their application to in-situ combustion EOR9
Numerical and analytical study for ultrasonic testing of internal delamination defects considering surface roughness9
Elastic parameters characterization of multilayered structures by air-coupled ultrasonic transmission and genetic algorithm9
Acoustic trapping of particles using a Chinese taiji lens9
Tracking fluids in multiple scattering and highly porous materials: Toward applications in non-destructive testing and seismic monitoring9
Efficient synthetic transmit aperture ultrasound based on tensor completion9
Characterization of bonding quality of a cold-sprayed deposit by laser resonant ultrasound spectroscopy9
Precise experimental determination of electrical equivalent circuit parameters for ultrasonic piezoelectric ceramic transducers from their measured characteristics9
Gas-Coupled Laser Acoustic Detection technique for NDT of mechanical components9
Using ultrasound to characterize the tongue-food interface: An in vitro study examining the impact of surface roughness and lubrication9
Classification of red blood cell aggregation using empirical wavelet transform analysis of ultrasonic radiofrequency echo signals9
Beamforming for large-area scan and improved SNR in array-based photoacoustic microscopy9
Tunable high acoustic impedance alumina epoxy composite matching for high frequency ultrasound transducer9
Influence of the conductivity of a liquid contacting with a lateral electric field excited resonator based on PZT ceramics on its characteristics9
0.027785062789917