Thermochimica Acta

Papers
(The median citation count of Thermochimica Acta is 3. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-05-01 to 2025-05-01.)
ArticleCitations
Editorial Board192
Editorial Board89
A study on molecular association in FLiNaK by high temperature mass spectrometry and Raman spectroscopy51
Density, vapor pressure, enthalpy of vaporization and heat capacity of (E)-isobutyl cinnamate51
Thermodynamic analysis of dehydration of K2CO3·1.5H2O44
Non-isothermal kinetic analysis of phase transformations in Fe-Co-V-Mo semi-hard magnetic alloy39
The experimental study of the kinetics and modes of polymethyl methacrylate thermal degradation in argon flows37
Heat capacity, density, surface tension, and contact angle for polyalphaolefins and ester lubricants37
Phase change materials encapsulated in graphene hybrid aerogels with high thermal conductivity for efficient solar-thermal energy conversion and thermal management of solar PV panels36
The effect of substituting of rare earth elements (R = Ho, Yb) on energetic characteristics of doped barium cerates31
Nucleation and crystallization of deeply supercooled benzocaine, a rapidly crystallizing organic compound: A Fast scanning calorimetry investigation31
Durable and flame retardant finishing of the wool fabrics with the combination of hydroxyl-phosphoramidate and 1, 2, 3, 4-butane tetracarboxylic acid31
A new strategy for butanol extraction from COVID-19 mask using catalytic pyrolysis process over ZSM-5 zeolite catalyst and its kinetic behavior29
Density, surface tension, and viscosity of Co-Cr-Mo melts measured using electrostatic levitation technique29
Thermogravimetric analysis on two Bambusa texlitis wastes slow pyrolysis behaviors and kinetics using isoconversional and parallel-reactions models29
Influence of multiply modified FeCu-montmorillonite on fire safety and mechanical performances of epoxy resin nanocomposites28
Effect of fly ash with or without mechanical activation on early-age cement hydration: A comparative case study by boundary nucleation and growth model28
Mechanistic study on the effect of acid leaching treatment on the microstructure evolution of different coal species and their macro-oxidative exothermic properties27
Thermal decomposition of flexible polyurethane foam under nitrogen and air atmospheres: Thermogravimetric analysis by ETp method27
Utilizing pulverized waste polyvinyl chloride film as an alternative reducing agent for iron ore reduction26
Research on the decomposition kinetics and thermal hazards of aniline diazonium salt26
Properties and curing kinetics of epoxy resin toughened by dimer acid diglycidyl ester25
Study of thermal runaway and the combustion behavior of lithium-ion batteries overcharged with high current rates25
Identification of carbon nanomaterials by deconvolution of thermogravimetric analysis signals25
On the use of the model-free way method for kinetic analysis of thermoanalytical data – advantages and limitations24
Normalization of the power-law rate equation for determining the kinetic parameters of the char-CO2 reaction24
Physicochemical properties, pyrolysis kinetics, thermodynamic parameters of activation, and evolved volatiles of mango seed waste as a bioenergy feedstock: A potential exploration24
Thermal study of the hydrocalumite–katoite–calcite system24
Gibbs Energy of Formation of U2Mo and U2Ti Determined by EMF Measurements in LiCl-KCl-UCl3 Melt24
Oxidation kinetics of typical high FeO ferrous spinels23
Shape–stabilized phase change materials composed of polyethylene glycol and ordered mesoporous silica synthesized from fly ash23
Specific binding of Ag+ to central C C mismatched base pair but not terminal C C pair in duplex DNA23
Vaporization thermodynamics of normal alkyl azides23
Kinetics of L-lactide bulk polymerization initiated with zirconium(IV) acetylacetonate studied by non-isothermal differential scanning calorimetry23
Analytical composition of flours through thermogravimetric and rheological combined methods22
Kinetic considerations and formation rate for carbon dioxide hydrate, formed in presence of a natural silica-based porous medium: How initial thermodynamic conditions may modify the process kinetic22
Graphene oxide and silane-modified graphene oxide/unsaturated polyester resin nanocomposites: A comparative cure kinetic and diffusion study22
Editorial Board21
Editorial Board21
Editorial Board21
Novel insights into the problem of enthalpy and entropy convergence in thermal decomposition of coal slag using the data from non-isothermal kinetic measurements21
Dilatometric inspection of phase changes in Mg-PSZ21
Torrefaction of sludge under CO2 atmosphere to improve the fuel properties for high temperature gasification with coal21
The bulk enthalpy of melting of α’-crystals of poly (l-lactic acid) determined by fast scanning chip calorimetry20
Effect of Al-5Ti-1B and Zr grain refiners on the solidification characteristics and microstructure of Al-6Mg alloy studied through thermal analysis20
Influence of fly ash or slag on nucleation and growth of early hydration of cement19
Facile preparation of functional decorated of phase change materials composites based on paraffin @ sodium alginate19
A note on the kinetics of non-isothermal crystallization of polymers19
Non-isothermal kinetics of the organocatalytic ring-opening polymerization of ε-caprolactone with metal-free α‑hydroxy acids: Eco-friendly and facile synthesis process18
Thermorheological characterization and ANN modelling of aqueous carbopol-titania yield stress nanofluid18
An innovative method for isothermal and non-isothermal predictions of complex reactions18
Experimental determination of phase stability of the cubic L12 HfAl3-xZnx phase18
Revealing the effect of annealing at Tg on the crystal growth in Au49Ag5.5Pd2.3Cu26.9Si16.3 metallic glass via nanocalorimetry17
Thermal expansion behavior and elevated temperature elastic properties of an interpenetrating metal/ceramic composite17
Derivation of the chain length distribution in crosslinked elastomers from thermoporometric literature data17
Revisiting biomass compositions determination using thermogravimetric analysis and independent parallel reaction model17
Optimal design and placement of heat sink elements attached on a cylindrical heat-generating body for maximum cooling performance17
Comparison of thermal stability between dicyclopentadiene/hydrogenated dicyclopentadiene petroleum resin: Thermal decomposition characteristics, kinetics and evolved gas analysis by TGA/TG-MS17
Thermochemistry of the binary system nitrocellulose + dimethyl 4,4´-dinitroheptanedioate17
Experimental and numerical investigation of the thermal properties and related microstructural influences of an interpenetrating metal ceramic composite at elevated temperatures17
Rare earth Ce based metal organic framework as efficient synergistic thermal stabilizer for PVC: Preparation and thermal stabilization behavior17
Accelerated isothermal decomposition behavior derived from the interaction of 3,4-dinitrofurazanfuroxan (DNTF) with amino nitrogen-rich compounds17
Effect of superplasticizers on hydration kinetics of ultrafine sulfoaluminate cement-based grouting material17
Study on the dynamic heating polymerization of PA MXD6: From thermal analysis to efficient polymerization17
Ammonium polyphosphate-melamine synergies in thermal degradation and smoke toxicity of flexible polyurethane foams16
Polymer informatics based on the quantitative structure-property relationship using a machine-learning framework for the physical properties of polymers in the ATHAS data bank16
Texture-irrelevant thermal conductivity and expansion properties of La2Ce2O7 ceramics16
Molecular dynamics simulation of combustion reaction process and products of oxygen-containing functional groups in coal based on Machine Learning Potential16
Melting point depression approach: Effects of equation format on the estimated Flory-Huggins interaction parameter16
Solution polymerization mechanisms and kinetics of bismaleimide with trithiocyanuric acid16
Effect of Ca/ Fe-based auxiliaries on anthracite char gasification under CO2 atmosphere: Synergistic catalysis16
Exploration of the combustion characteristic based on the pyrolysis and combustion spectral analysis of single base propellant16
Synergistic effect of green phosphorus-containing bio-based material and two-dimensional layered material composite on flame-retardant property of polyvinyl alcohol16
Isoconversional kinetic analysis of thermal decomposition of Bidirectionally stabilized amorphous formulation loading Vitamin D3 (Cholecalciferol) and Calcium Carbonate16
Fusion method of model-free and model-fitting for complex reactions in accelerating rate calorimetry16
Time-temperature-transformation diagrams from isoconversional kinetic analyses applied to the processing and reprocessing of vitrimers15
Temperature programmed reduction of a core-shell synthetic magnetite: Dependence on the heating rate of the reduction mechanism15
Prediction on the compatibility of chitosan/polyvinyl alcohol blend based on Schneier mixing enthalpy15
Editorial Board15
Increasing the bromazepam solubility by forming eutectic mixture with citric acid15
Thermal safety and overall kinetics for methyl methacrylate solution polymerization via on-line process analytical technology15
Thermal decomposition paths of calcium nitrate tetrahydrate and calcium nitrite15
Towards the thermal reactivity and behavior of co-agglomerated crystals of DATB and TATB with attractive nitramines15
Editorial Board15
Characterisation and double parallel random pore model fitting kinetic analysis of faulty coal oxygen-enriched co-combustion15
A kinetic study of CO2 sorption/desorption of lithium silicate synthesized through a ball milling method15
Thermal decomposition kinetics and mechanism of poly(ethylene 2,5-furan dicarboxylate) Nanocomposites for food packaging applications15
Effect of pressure on TATB and LX-17 thermal decomposition15
Copper-dispersed solar salt: An improved phase change material for thermal energy storage15
Fast scanning calorimetry on volatile carbon-based materials15
Preparation and property measurement of ternary eutectic sodium salt with multiwalled carbon nanotubes14
Kinetics of enthalpy recovery studied by temperature-modulated differential scanning calorimetry14
Study on the effect of different seawater mass ratio on coal spontaneous combustion characteristics14
Thermal stability of organic Phase Change Materials (PCMs) by accelerated thermal cycling technique14
Sinter-crystallization kinetics and foaming of glass from metallurgical slag in air and inert atmosphere14
Glass transition temperature of poly(d,l-lactic acid) of different molar mass14
Risk evaluation of coal spontaneous combustion from the statistical characteristics of index gases14
An in-situ calorimeter for coal powder: A numerical investigation14
Liquid and crystallized phases stability in the sub-system H3PO4H4P2O7: Experimental determination and modeling14
Crystallization behavior of a series of Zr-based metallic glasses14
Thermogravimetric analysis of co-combustion between municipal sewage sludge and coal slime: Combustion characteristics, interaction and kinetics14
Smart thermal behavior of tripeptide leucyl-leucyl-leucine towards vapors of binary mixture of benzene and tetrachloromethane14
Crystallization kinetics of Hf28Be18Ti17Zr17Cu7.5Ni12.5 high-entropy bulk metallic glass13
Editorial Board13
Inverse modeling of thermal decomposition of flame-retardant flexible PVC with model-free coupled with model-fitting method13
Applying machine learning to reveal the microscopic heat transfer mechanism of nanofluids as coolants13
Editorial Board13
Kinetic study on flue gas torrefaction of real components of corn stalk13
Hydration heat and kinetics of composite binder containing blast furnace ferronickel slag at different temperatures13
Probing calorimetric heat transfer phenomena in multi-nanophase substances: A case study of some over-stoichiometric nanoarsenicals13
Thermal stability of sulfonated carbon black13
Ternary nickel(II) complexes with histidine and glycylglycylglycine in solution13
Thermal analysis on parchments II: Micro-DSC approach to assess and rank heat damages at a molecular level12
Experimental study on thermal conductivity of kerosene-based nanofluids12
Study on the characteristics of gas phase products in coal mine conveyor belt fire12
Mechanistic and kinetic insights into phenol-catalyzed cyclotrimerization of cyanate esters12
Measurements on the thermal conductivity of three fuel blends containing a biodiesel compound methyl laurate + diesel compounds: n-Undecane, n-dodecane, n-tridecane12
The effect of the sample pan position on the determination of the specific heat capacity for lipid materials using heat flux DSC12
Cure mechanism and kinetic prediction of biobased glass/polyfurfuryl alcohol prepreg by model-free kinetics12
Unraveling the role of ammonium perchlorate on the thermal decomposition behavior and kinetics of NC/DEGDN energetic composite12
Editorial Board12
Thermal analysis and phase changes of mechanochemically activated sodium carbonate12
Thermal analysis of crystallization reveals subtle interactions in pristine graphene-polycaprolactone nanocomposites11
Thermogravimetric experimental study on the co-combustion of coal gangue and polypropylene11
Evaluating thermogravimetric analysis for the measurement of drug loading in mesoporous silica nanoparticles (MSNs)11
Model-free kinetic determination of pre-exponential factor and reaction mechanism in accelerating rate calorimetry11
Magnetic characterization of Sm(Fe1-, Cox)11Ti (x = 0, 0.1) determined by heat-capacity measurement from very low to high temperatures11
Dynamic crystallization kinetics and morphology of carbonaceous nanofillers-reinforced poly (lactic acid) foams11
Influence of poly(vinyl alcohol) on poly(glycolic acid) crystallization: An investigation into intermolecular interactions11
Study on pyrolysis characteristics and kinetics of mixed waste plastics under different atmospheres11
Pyrolysis kinetics and flame retardant enhancement of bio-based polyamide 56/611
Protonation equilibria of the tryptophan metabolite 8-hydroxyquinoline-2-carboxylic acid (8-HQA) and its precursors: A potentiometric and calorimetric comparative study11
Research progress and prospects of CO2 fire prevention and extinguishing technology in mine goafs11
Lanthanide complexes with 2,6-dimethylbenzoic acid and 2,2′:6′,2′′-terpyridine: Crystal structures, thermochemical property and luminescent behavior11
Experimental investigation of the rheological and phase change behavior of adipic acid as a phase change material (PCM) for thermal energy storage at 150 °C11
Non-isothermal cure kinetics of an anhydride-cured cycloaliphatic/aromatic epoxy system in the presence of a reactive diluent11
Thermal inertias and confidence intervals in the determination of activation energy by isoconversional methods applied for accelerating rate calorimetry11
Glass transition behavior of poly(methyl methacrylate) in compressed carbon dioxide revisited – New perspectives11
Effect of morphology on the isothermal decomposition kinetics of nitroguanidine11
Isoconversional methods: The many uses of variable activation energy11
Effect of alkaline nitrate addition in the CO2 chemisorption of pentalithium ferrite (Li5FeO4) at low and moderate temperatures11
Influence of flue gas torrefaction on the fuel properties and pyrolysis characteristics of real components of corn stalk11
Thermo-chemical transition in cellulose esters and other polymers11
Sustainable humification of food waste slurry through thermally activated persulfate oxidation11
One step synthesis of novel CuS-ZnS/SiO2@n-octadecane nanocapsules with full spectral absorption range and high photothermal conversion efficiency10
Effect of Ti and Al ratio on glass forming ability and crystallization behavior of Zr-Cu-Al-Ti alloy powders10
Durable functional modification of silk fabric with reactive P/N/S-containing flame retardant10
Thermogravimetric analysis of co-combustion of a bituminous coal and coffee industry by-products10
Insights into the thermal stabilization mechanism of zeolitic imidazolate framework-8 for poly(vinyl chloride)10
Effect of natural carbon filler on thermo-oxidative degradation of thermoplastic-based composites10
A thermo-kinetic investigation on the thermal degradation of polyvinyl chloride in the presence of magnetite and hematite10
Phosphorus features halogen –calcium hypophosphite replaces antimony trioxide, reduces smoke, and improves flame retardancy10
A new insight into the mechanism of solid-state cyclization of dipeptides: The effect of the sequence of amino acid residues in phenylalanyl-leucine and leucyl-phenylalanine10
Investigation on oxidation stability of V2AlC MAX phase10
Non-isothermal decomposition kinetics of commercial polyacrylamide hydrogel using TGA and DSC techniques10
Thermal treatment of anhydrous chromium (III) chloride: Thermodynamic study10
Thermal stability of energetic 6,8-dinitrotriazolo[1,5-a]pyridines: Interplay of thermal analysis and quantitative quantum chemical calculations10
Thermophysical properties of Co–Si melts measured by an electrostatic levitation technique10
Study on the conversion of CaCl2 with H2O and CO2 for dechlorinating pyrolysis of municipal solid waste10
Targeted control of unsaturated polyester resin curing kinetics to enhance network regularity and achieve impressive improvement in mechanical properties using gamma-aluminia: Exploring the relationsh10
Kinetic analysis of complex chemical reactions by coupling model-free and model-fitting analysis10
Curing kinetics of dually-processed acrylate-epoxy 3D printing resins10
Thermal behaviors and kinetic analysis of dicyclohexylmethane-4,4′-diisocyanate (HMDI)10
Quantification of enthalpy of extraction of Eu(III)-glycolamide solvent systems using isothermal solution calorimetry-Influence of extraction parameters and solvent aggregation9
Affected Polymer Layer and Thermo-mechanical Behavior Correlation in Nylon-6/Polycarbonate/Graphene-Oxide Nanocomposites: A Quantitative Study of Polymorphism9
Inhibition effect and mechanism of nano-aluminum hydroxide foam on coal spontaneous combustion9
Simulation of molecular reaction kinetics of gas and coal dust mixture explosion suppression by MPP based on machine learning potential9
Thermal analysis of protein stability and ligand binding in complex media9
The influence of ammonium polyphosphate on the smoke toxicity of wood materials9
A Unified Extrapolation thermodynamic model for multicomponent solutions based on binary data9
Detecting reorganization in semicrystalline polymers during heating: Insights from Fast Scanning Chip Calorimetry coupled with real-time optical microscopy9
Editorial Board9
Editorial Board9
Low-temperature heat capacity, phase transitions and thermodynamic functions of 2-furfurylamine9
The burning and pollutant formation processes during cigarette smoking under various inhalation frequency9
Study on rheological behaviors and rheokinetics of urushiol/MDI resin system during curing process9
Advanced isoconversional kinetic analysis: Insight in mechanisms and simulations. Successes and future9
Vaporization enthalpies of self-associated aromatic compounds at 298.15 K: a review of existing data and the features of heat capacity correction. Part II. Anilines9
Synthesis and curing kinetics of O-aminoacetophenone-modified dicyandiamide curing agents for epoxy resin9
Editorial Board9
Editorial Board9
Editorial Board9
Kinetics of the oxidative aging of phthalonitrile resins and their effects on the mechanical properties of thermosets9
Secondary crystallization of low-isotacticity polypropylene9
Thermal oxidative degradation of cyanate- and amine-cured epoxy resins: Experiment and ReaxFF simulation9
Thermoluminescence characteristics of UV-irradiated natural hackmanite9
Exploring the curing kinetics of Acrolein-Pentaerythritol resin: Impact of molecular weight and molecular weight distribution on cure behavior9
Effects of heat/mass transfer limitations and process exothermicity on the kinetic parameters of the devolatilization and oxidation reactions of wood chars9
A new sustainable strategy for oil, CH4 and aluminum recovery from metallised food packaging plastics waste using catalytic pyrolysis over ZSM-5 zeolite catalyst8
Pyrolysis mechanism of different thermal aging of PVC insulation copper cable for home decoration8
An experimental investigation of the formation enthalpies of intermetallic phases in the TM(Co,Fe)-REM(Tb,Ho,Er) systems8
Impacts of TGA furnace parameters for prediction of long-term thermal stability of ionic liquids8
Determination of activity of RE (RE = Nd and Dy) in molten RE‒Fe‒B alloys by the electromotive force method8
Assessing the feasibility of recovering heat from Mung Bean sprout production for food consumption8
On the decrease of entropy on cooling polymer melts and an orientationally-disordered crystal8
Recovery of phenol and acetic acid from glass fibre reinforced thermoplastic resin using catalytic pyrolysis process on ZSM-5 zeolite catalyst and its kinetic behaviour8
Study of reactions in the solid phase leading to the formation of SrSn0.9Mn0.1O3 perovskite oxide8
Kinetic features of nonisothermal degradation of polyarylene ketones8
Experimental evaluation of the effect of sulfur content on the spontaneous combustion characteristics parameters of coal8
Revisiting high-energy X-ray diffraction and differential scanning calorimetry data of EN AW-6082 with mean field simulations8
Shedding light on the mechanism of graphene oxide thermal decomposition: A kinetic study using isoconversional method and artificial neural network8
Thermal and structural properties of polyzwitterions: Effects of monomer chemistry and salt addition8
A reinterpretation of the Ozawa model for non-isothermal crystallization at fixed scan rates8
High-pressure crystallization of iPP nanocomposites with montmorillonite and carbon nanotubes8
Synthesis and thermal properties of novel bismaleimides containing cardo and oxazine structures and the thermal transition behaviors of their polymer structures8
Heat capacity of poly(N-vinylpyrrolidone)8
Thermodynamic investigation of ZnMoO4 (s) and Zn3Mo2O9 (s) compounds8
Curing rheokinetics of epoxy-amine composition8
Impact of ion exchange on zeolite hydrophilicity/hydrophobicity monitored by water capacity using thermal analysis8
Increasing the reactivity of waste biochars during their co-gasification with carbon dioxide using catalysts and bio-oils8
Characterization of thermal behavior of two types of kaolin in China by ultrafast Joule heating combined with XRD, FT-IR, TG-DSC and SEM8
Thermal decomposition of silver propionate8
Kinetics of Controlled Cure System Triggered by Release of Encapsulated Catalyst8
Design, calibration and testing of a novel isothermal calorespirometer prototype8
Nitration of biodiesel by acetyl nitrate: Kinetic study and chemical safety parameters8
Non-contact photopyroelectric approach for complete thermal characterization of porous building materials8
Isoconversional kinetic analysis for determining the rate of cross-linking for Pt and peroxide cure silicone rubbers7
Flash DSC characterization of thermal contact resistance and cross-plane thermal conductivity of micrometer-thin films7
Study of the kinetics of methane-carbon dioxide exchange in gas hydrates below the ice melting point. Experimental data and computational model7
Additive scheme of solvation enthalpy for halogenated aliphatic hydrocarbons at 298.15 K.7
Kinetic analysis of the thermal degradation of an intumescent fire retardant coated green biocomposite7
Step-scan differential calorimetry of protein denaturation: Modeling and experiment7
Effect of particle size on the kinetics of pure oxygen combustion of coke7
Nickel improving the combustion of boron powder7
A protocol to further improve the thermal conductivity of silicone-matrix thermal interface material with nano-fillers7
Thermal decomposition of volcanic glass (rhyolite): Kinetic deconvolution of dehydration and dehydroxylation process7
Thermochemistry of fusion, solution and hydrogen bonding in benzamide, N-methylbenzamide, and acetanilide7
3-formylchromones: Vapor pressures and standard molar enthalpies, entropies and Gibbs energy of sublimation7
Investigation on co-combustion behavior and kinetic analysis of bamboo char/waste plastics (PVC) hydrochar7
Assessing the potential of the invasive grass Cenchrus echinatus for bioenergy production: A study of its physicochemical properties, pyrolysis kinetics and thermodynamics7
The influence of particle size and heat treatments on the transformation energies of a gas atomized Cu-Al-Ni-Mn shape memory alloy7
Study on the ablation behavior of C/SiC composite materials under the action of local structural thermal sources7
Study on properties and phase transformation mechanism of oil-based solid-solid phase change materials7
ICTAC Kinetics Committee recommendations for analysis of thermal decomposition kinetics7
Non-isothermal thermogravimetry as an accelerated tool for the shelf-life prediction of paracetamol formulations7
Palmitic acid graphene composite phase change materials: A molecular dynamics simulation7
Review of supercooling suppression of phase change materials based on nanoparticles7
Preparation, characterization, thermal behavior and decomposition kinetics of new high-nitrogen energetic salts based on 3-amino-5-hydrazinopyrazole7
Microstructure, melting behavior and thermal conductivity of the Sn–Zn alloys7
Theoretical and experimental studies on the size- and morphology-dependent thermodynamics of nanoparticle electrodes7
Thermogravimetric analysis of pulverized coal in low oxygen atmosphere7
Thermophysical properties of pressure-sensitive paint7
Tailored group contribution methods designed using machine learning to predict enthalpies in carboxylic acids and anhydrides7
Kinetic investigation of aschalcha heavy oil oxidation in the presence of cobalt biocatalysts during in-situ combustion7
Remarkably enhanced crystallization behavior and impact toughness of poly(ethylene terephthalate) via introducing phenyl–terminated hyperbranched polyester7
The use of isothermal calorimetry to measure corrosion rates of metals in contact with preservative-treated wood7
Editorial Board6
Doping SrSnO3 perovskite with transition metals: Synthesis of double hydroxides, thermal decomposition, and pigment potential6
Shape-stabilized n-heptadecane/polymeric foams with modified iron oxide nanoparticles for thermal energy storage6
Development of cationic oligodiaminogalactoses specifically binding to duplex RNA, but not to duplex DNA6
0.12953901290894