Textile Research Journal

Article	Citations
Creation of new textile utilizing Nishijin’s hikibaku technique and exploring new applications in other industries	146
Knowledge-enhanced contour detection method for measuring slub yarn parameters	84
Calculation method for the tensile force of worn loop yarn	71
Response and damage mechanism of UHMWPE 3D weft-knitted inlay fabric reinforced composites under low-velocity impact	66
Effect of base fabric and raising cycles on mechanical properties, subjective hands and preference of ultra-fine fiber suede	53
Different assembled nano-MnO2 fiber supercapacitors applied for smart wearable clothing	52
Finite element analysis of the tensile strength of laminated fabric for automotive seat covers	51
Surface modification of polyimide fibers for high-performance composite by using oxygen plasma and silane coupling agent treatment	39
Finite-element simulation of functional knee sleeves based on three-dimensional modeling of the knee joint	38
Synthesis of epoxy resin-based aqueous polyurethane and application to polyester-cotton fabric finishing	34
Optimized combined spectral calibration model based on single-constant Kubelka–Munk theory for color prediction of pre-colored cotton fiber blends	34
Research of textile logarithmic-aperiodic antennas with a matching circuit for textronics applications	32
Foam dyeing: A review of its potential to reshape sustainable textile processing	31
Multi-objective optimization of weight reduction process parameters of micropolyester woven fabrics using Taguchi gray relational analysis	30
Optimized design of sports bras with pressure comfort, thermal comfort, and shaping support	29
Investigating the effects of cognitive scenarios between real fabric and fabric visual representations	27
Numerical simulation and tension regulation of yarn mechanics on warp knitting machines	25
Construction of a novel hydrogel composite with polylactic acid nonwoven fibers: rapid and effective removal of Pb(II) and Ni(II)	22
The quality comparison of open-end rotor-spun yarns produced from cotton waste in gray state and after dyeing	21
Evaluating sustainability in the textile sector using WASPAS and TOPSIS: A multicriteria decision-making approach	21
Optimization design of functional running pants and evaluation of thermal-humid comfort capabilities	19
Influence of fiber length on the yarn-forming process of rotor spinning	19
Chemical recycling of hemp waste textiles via the ionic liquid based dry-jet-wet spinning technology	18
Engineering highly electroactive nanofibers through high-speed spiral multidirectional drafting electrospinning for sensitive and stable motion monitoring textiles	17
Enhanced broadband sound absorption of multi-layer composite material based on three-dimensional warp-knitted spacer fabric	17

Toward a sustainable transition in automated production: enabling the vision-based approach and synchronous control for textile surface inspection systems	17
A fiber recognition framework based on multi-head attention mechanism	17
Construction of color solid by gridded color mixing of nine primary colored fibers and spinning of full color gamut yarn	17
Low infrared emissivity composite materials for multi-band camouflage	17
Experimental and theoretical investigation of water-jet triboelectric charging of meltblown nonwoven fabrics	17
Numerical simulation for electric field intensity and jet space of the quadratic spiral spinneret with auxiliary electrode	16
The application of 3D printing technology for developing a lumbar support garment for obese women	16
Comparative analysis on friction fields derived from different bottom pins in the drafting system of ring spinning and their effects on yarn properties	16
A novel objective fabric pilling evaluation method based on the photometric stereo algorithm	15
Shape memory surface adhesion control based on PU-CNC/PS electrospun composite films	15
Effect of knitting structure and dyeing process on drying time, air and vapor permeability	15
Research on the pressure relief mechanism and modulus adjustment method of spacer fabric	15
Mitigating elastane damage in denim stone washing: Effects on thermal comfort and low-stress mechanical performance	15
Dynamic behavior analysis of the winding system during filament reversing pushed by the traverse mechanism	14
Design and fabrication of auxetic weft-knitted fabric with foldable and rotating rectangular structures	14
Forced wetting of hydrophobic knitted fabrics analyzed with X-ray imaging	14
Design and performance evaluation of zoned structures in fully fashioned 3D weft-knitted shoe uppers	14
Optimized division algorithm applied to the pattern design of the segment filling insertion technique	13
Comfort properties of special clothes worn by sufferers from atopic dermatitis	13
A quantitative assessment of seam strength and efficiency across various seam types in shoe upper leathers	13
The coupling effects of seawater aging and fatigue micro-crack on mechanical degradation of carbon fiber/epoxy plain woven composites	13
Quantification of fabric morphology and prediction of drag crisis based on the fractal dimension	13
Herbal synthesis of silver nanoparticles for improved dyeing and UV protection of cotton fabric	13
Advances in yarn tension control for warp-knitting progress	13
High air and moisture permeability honeycomb structure fabric based on filament spreading technology	13
Prediction method of carding process production quality based on digital twin technology	12
Structural design of single functional jersey with moisture comfort based on yarn combination	12
Textile laundering and body odor: a comprehensive review	12
Multi-dimension feature analyses for low-liquor ratio yarn bobbin dyeing combining mass transfer modeling	12
Research into the thermal expansion behavior of spread tow woven pierced carbon/carbon composites at high temperature	12
An improved dynamic model and numerical simulation of yarn in the ring spinning system	12
A preclinical approach to textile finishing and evaluation of bamboo fabric coated Acalypha indica and Tectona grandis	12
Development of multi-material hybrid yarns consisting of steel, glass and polypropylene filaments for fiber hybrid composites	12
Development of yarns from recycled carbon fiber based on friction spinning technology with specific properties for thermoset composites	12
Connecting surface-mounted electronic elements with amber strand metal-clad conductive fibers by reflow soldering	12
Stiffness in compression therapy: Analytical estimation of pressure changes beneath textile compression devices	12
Wireless transmission of patient sensor data using smart textiles	12
Research status of simulation modeling technology for the 3D braiding process	12
A method for approximating weave diagrams under heald frame constraint	11
Counter-plying of two-ply yarn: inner structure changes and external response	11
Effect of dodecyl dimethyl benzyl ammonium chloride on dyeing kinetics and thermodynamics of spandex fibers dyed with acid dye	11
Investigation into the capacitance performance of blended sliver composed of metal and polyester staple fibers	11
A sustainable desizing process for PVA-sized cotton fabric using ultraviolet C	11
The investigation of flame-retardant fiber mats for high performance composites: flame retardancy and structure performance	11
Morphology and properties of filter paper prepared by highly fibrillated poly(p-phenylene benzobisoxazole) fiber	11
Prediction of optimum alkaline hydrolysis conditions for imparting superhydrophobicity to large-area fabrics using three-dimensional modeling	11
Effects of ambient temperature step changes on the heat storage and release in thermal protective clothing	11
Identification and counting of the reeling cocoon number per thread for the automatic silk reeling machine	11
Enhancing heat protection performance of firefighters’ protective clothing: A comparative analysis of fabric and knit structure in the lining of multi-layered construction	11
Novel composite yarn with a wavy-network structure produced by various delivery speed ratios and untwisting factors	10

Thermal resistance prediction of aerogel fabrics after repeated washing based on small-sample data	10
Research on improved YOLOv8 fabric surface defect detection algorithm	10
Silk fabrics modified with Si 4 N 3 @Ag nanoparticles for photothermal conversion and bacteriostat	10
Synthesis of poly(styrene-N-hydroxymethyl acrylamide) microspheres and their application in patterned photonic crystals	10
Effects of structural parameters on air consumption and mechanical energy characteristics of airflow in the vortex spinning nozzle	10
Antibacterial activity and sustained release properties of curcumin-loaded chitosan microspheres/nanofiber composites membranes for wound healing applications	10
An intelligent generative method of fashion design combining attribute knowledge and Stable Diffusion Model	10
Measuring the impact of ginning stages on cotton fiber quality in the context of west and central Africa	10
Textile-based wearable device for detection of date rape drugs in drinks	10
Analysis and evaluation of the thermal performance of combinations of suits and life jackets in water	10
Sock-YOLO: A lightweight knitted sock defect detection model	10
Preparation, properties and environment-friendly dyeing application of reactive brilliant blue dye based on triphenodioxazine chromophore	10
FE modeling of woven fabric at the fiber bundle level under ballistic impact	10
Zero-defect manufacturing in the textile industry: a review of current advances and challenges	10
Heat and sweat regulating performance of zoning structure weft-knitted sportswear	10
Theoretical and experimental study on the formation mechanism of fiber bundle hooks in the combing process	9
Categorization of different types of people based on their electroneurophysiological responses to fabric–skin contact	9
Investigation of the moisture transfer ability and thermal comfort properties of single-layer cotton/polyester interwoven fabrics	9
Effects of washing on the mechanical properties of medical compression stockings	9
Study on the microstructure characteristics, compression, and thermal insulation properties of duck down	9
Evaluation of the dyeability of hemp fabric with Anatolian black pine (Pinus nigra subsp. Pallassiana) and Scots pine (Pinus sylvestris L.)	9
Analysis of the influence of post-processing parameters on the curling phenomenon of knitted fabrics using pixel images	9
Development and analysis of a three-dimensional braided honeycomb structure	9
One-step preparation of dendritic δ-MnO 2 -enhanced activated carbon fiber loading for formaldehyde removal at room temperature	9
Three-lead in vivo measurement method for determining the skin-electrode impedance of textile electrodes	9
Simulation design and experimental study of beveled angle narrow-slit needleless electrospinning spinneret	9
TAIL: A deep learning framework enhancing fabric hand evaluation through multimodal data fusion	9
Antibacterial activity of silk-based blend nanofibers grafted with benzophenone and vitamin B derivatives	9
Classification of waste cotton from different countries using the near-infrared technique	9
Application of image processing technology on testing blending ratio and blending irregularity of blended yarns	9
Effect of underwater flexibility of a soiled cloth on the detergency of automatic washing machines	9
Integrating artificial intelligence for optimal thermal comfort: A design approach for electric heating textiles aligned with user preferences	8
Finite element modeling and simulation of yarn in winding process	8
Extraction of textiles patterns regularities in Qing Dynasty court women’s Changyi based on grounded coding theory	8
Isometric fiber distribution in the roller drafting zone	8
Design optimization of a three-dimensional hexagonal braiding technique	8
Unsupervised fabric defect detection algorithm based on vector quantization and feature distance	8
Simulation analysis and optimization design of energy supply for smart clothing based on a triboelectric nanogenerator principle	8
Review of cloth modeling and simulation for virtual fitting	8
Concave and convex small radius bending behavior of single and multiple layers reinforcement fabrics	8
A novel raspberry-like hierarchical multicompartmental microcapsule for fragrance slow-release and nanoenergy cells killing bacteria	8
Relationship between drafting force and morphological structure of fiber bundles during the combing process	8
Improved fiber orientation measurement in nonwovens with corner removal	8
Substrate effect and structure optimization of fabric-based circularly polarized dipole antenna for radio frequency energy harvesting	8
Design of bioinspired highly efficient, eco-friendly, and self-adhesive emulsion for superhydrophobic polyester fabrics	8
Light transmission of weft-knitted fabrics for seamless garments	8
Effect of crossing warp architecture on tear strength of 3D orthogonal woven T-shaped reinforcements	8
Study on preparation and performance of multifunctional linen fabric finishing agent	8
Hygrothermal aging behavior and flexural property of carbon fiber-reinforced polyethylene terephthalate glycol composites	8
Effect of sodium hydroxide and acetone pretreatments on the adhesion of three-dimensional printed polylactic acid filaments on linen and polyester fabrics	8
A mesoscale tensile model for woven fabrics based on Timoshenko beam theory	8
Clothes retrieval based on ResNet and cluster triplet loss	8
Recent advances of preparing structure-enhanced conductive yarns to control their performance in potential applications	8
Effect of dyebath alkali in salt-free reactive dyeing of cotton to reduce effluent load	8
Viscoelastic tensile model of core/wrapped composite yarn with double filament	8
Woven filter media used in wet filtration processes: investigation of pore size distribution, air and water permeability and finding correlations between them	8
Image analysis to evaluate removal of particles from fabric surface	8
Numerical analysis of dry heat transfer in textiles and clothing microclimate	8
Investigation of mechanical properties and failure behavior in three-dimensional braided carbon fiber ribbed composites	8
Thermal activation and dynamic mechanical characterization of glass-reinforced shape memory polymer composites for medical applications	8
Uniaxial tensile strain correction of multi-axial warp-knitted fabric	8
Factors affecting the friction coefficient of wet fabrics	8
Dye uptake prediction of Disperse Yellow 23 dye on PET fibers in supercritical carbon dioxide using neural networks	7
Geometric model of tufts based on the internal fiber configurations	7
Synthesis, recovery, and application of environmentally friendly disperse dyes with high light fastness	7
Design and evaluation of sportswear integrated with electrical muscle stimulation	7
Comfort properties of PLA/cotton multilayered quilted fabrics	7
Sustainable silk dyeing in a silicon non-aqueous dyeing system with Reactive Red 195: salt-free and less alkali	7
A prediction method and its application for twist of slub yarn based on micro-element yarn	7
Level dyeing property and aggregation morphology of reactive black 5 on cotton fabric in a salt-free and less-water dyeing system	7
Qualified nano-composite yarn for hydrophobic fabric via online nano- and micron-fiber composite spinning	7
Simulation of the dynamics of a flexible fiber in the swirling airflow in a nozzle containing cylindrical and divergent conical sections	7
Evaluation of the influence of three-dimensional printing conditions on peel resistance and surface roughness of flexible polymer-textile composites	7
Quantitative analysis of the relationship between the male body shape and block pattern based on the three-dimensional human model	7
Hierarchical nanoengineered emulsion with robust adhesion enables superior self-cleaning cotton fabrics	7
Experimental research and numerical simulation of the relationship between yarn tension and multi-balloon shape	7
Simulation and experimental study on transverse nonlinear vibration of axially moving yarn	7
Modeling of fabric sewing break detection based on U-Net network	7
Investigation of the influence of high molecular weight polyethylene and basalt content used in three-dimensional weft-knitted fabrics on the mechanical risks	7
Stretchable three-dimensional tunable frequency selective fabric of U-shaped units and its electromagnetic response mechanism	7

Numerical study on thermal conductivities of spread tow woven pierced composites	7
Automatic coloration of pattern based on color parsing of Sung porcelain	7
Pressure control algorithm of yarn precision winding based on proportional–integral–derivative ant colony optimization	7
Double-faced shading effect digital jacquard fabric with a weft-backed and warp-wadded structure	7
Quantum chemistry calculation and experimental research on the component proportion of black disperse dye	7
Aramid filament/polyphenylene sulfide staple yarn fabric for pipe rehabilitation: hydrothermal aging and resin impregnation	7
Source strengths obtained with three clean air suits fulfilling the requirements for high performance in EN 13795-2:2019: An experimental study	7
Optical coherence tomography imaging can identify Merino lambs’ wool using automatic machine learning vision	7
The effects of the support panel of compression leggings on the provision of low pressure for foot progression angle correction	7
Efficient fabric anomaly detection: A transfer learning framework with expedited training times	7
Bio-degumming of ramie fiber using an integrated spiral symmetry stream anaerobic bioreactor	7
Viscoelastic behavior of warp-knitted spacer fabrics in iterative compression and decompression	7
Reconstructing hyperspectral images of textiles from a single RGB image utilizing the multihead self-attention mechanism	7
Prediction of γ-ray shielding performance and study of Bi/PU coated fabric	7
Comparative analysis of the static adsorption of oil droplets and the dynamic absorption capacity of their aggregates by cotton, kapok, cattail and flax fibers	7
Parallel web crawling for customer analytics	7
Knitting region segmentation and knitting parameter generation for three-dimensional model of socks	7
A protein analysis-based method for authentication of human hair wigs	7
An efficient unsupervised approach for textile defect detection through unifying texture reconstruction and semantic localization	7
Impact of lifters on velocity and residence time distributions of fabrics in a tumble dryer	7
CACFNet: Fabric defect detection via context-aware attention cascaded feedback network	7
Effects of back panel design of outdoor backpack on human physiological and psychological response in a hot environment	7
Enhancing hemp fiber performance: insights into chitosan treatment and structural evolution	7
Brain signal changes of the amygdala cortex according to the physical performance of fabric	7
Analysis of progress in research on technology for the detection and removal of foreign fibers	7
Directional breaking strain of single-bar closed warp-knitted structures	7
Influence of clamping methods on the ballistic performance of 3D shallow straight-joint woven fabrics	6
Incorporating convolutions into transformers for textile fiber identification from fabric images	6
Comprehensive noise reduction performance of polyurethane/ferroferric oxide/activated carbon fiber felt coated flexible composites	6
Study on reactive dyeing in a sustainable nonaqueous medium dyeing system by X-ray electron spectroscopy	6
Multi-response mixture design applied for the formulation of a textile green camouflage ink with reproduction of a leaf green	6
Study on thermal, mechanical, and wettability properties of three-dimensional weft-knitted spacer fabrics with various silica aerogels coating	6
pH-Controlled bio-reduction of indigo with S. cerevisiae whole-cell biotransformation	6
Design and characterization of multi-functional ternary composites with a hierarchically porous and filled-microperforated plate structure	6
Self-assembled composite fabrics of lotus stem fiber with ultra-high liquid absorption properties	6
Improvement in dyeing and physical properties of wool fabrics through pretreatment based on the bacterial culture of Stenotrophomonas maltophilia DHHJ	6
Enhancing two-way shape memory behavior of polycaprolactone nanofibers through aligned crystallization optimization	6
CORRIGENDUM to Interconnecting embroidered hybrid conductive yarns by ultrasonic plastic welding for e-textiles	6
Preparation of hygroscopic fabric with a uniform and slow exothermic effect and its thermoregulation evaluation	6
Reactive dyes in the fabrication of gold nanoparticles as wool textile colorants	6
Preparation of multicolor microcapsules and their application in smart color-switching textiles	6
Rapid simulation of knitted fabrics based on a ribbon yarn model	6
An improved algorithm for three-dimensional reconstruction of nonwoven microstructures by using multi-focus images	6
Geotextile performance of fabrics woven by polyethylene terephthalate yarns prepared directly from drinking bottles	6
Warp control devices and tension for triaxial woven fabric with carbon fiber	6
Quantifying humidity thresholds affecting work performance in protective clothing through nonlinear response analysis	6
Optimization of the quilting method and filling quality of cold-proof down clothing based on thermal insulation performance	6
Modeling the temperatures of traveler and ring in ring spinning	6
Enhancement of crystallinity of jute fibers through surface modification and gamma irradiation	6
ViCo: Human visual perception-based contour extraction of Chinese Tang dynasty textile patterns	6
Analyses of micro-structure and mechanical behavior of polyester pre-oriented filament with dark color by adjusting linear density	6
Siro false twist spun yarn structure and the knitted fabric performance	6
A study on the unwinding tension control of an elastic yarn	6
Fabric rendering with fiber-scale staple yarn models	6
Analysis and measurement of the shape of spinning balloons	6
Fabric defect detection via a spatial cloze strategy	6
A vision-based approach to mapping flexible objects for garment development	6
Research on the modulus variation of composites made of a spacer fabric coupled with 3D printing materials	6
Determination of the lignin content of flax fiber with the acetyl bromide-ultraviolet visible spectrophotometry method	6
Characterizing fabric shape retention by sequential image analysis	6
Algorithm to determine local basis weight of random fibrous networks with X-ray microtomography and SEM images	6
Development of Women’s Shirt Style Recognition Model (WSSRM) based on a ResNet and Transformer integrated method	6
Stress distribution of the nonwoven fabric package during winding	6
Numerical simulation of fiber motion in airflow during yarn formation: A review	6
A hollow carbonized kapok fiber/nano CoFe2O4 composite for broad bandwidth and enhanced microwave absorber	6
Transverse vibration characteristics and plane stress distribution of the carbon fiber prepreg tape subjected to nonuniform tension	6
Research on the development and performance of flexible protective fabrics with knitted structure	6
Application of viscoelastic-plastic model in blended yarn	6
Design and evaluation of a novel interactive firefighter clothing with multiple functionalities	6
Fabric defect detection based on low-rank decomposition with factor group-sparse regularizer	6
FabricGAN: an enhanced generative adversarial network for data augmentation and improved fabric defect detection	6
Thermal stability of UV irradiation crosslinked polylactic acid fibers and fabrics	6
Systematic review of selecting comfortable sportswear: Predicting wearing comfort based on physiological responses and materials properties	6
Three-dimensional simulation of heat and moisture transfer in woven fabric structures	6
Robust superhydrophobic cotton fabrics based on nano-silica particles hybrid epoxy resin: self-cleaning, anti-fouling, anti-abrasion and oil–water separation	6
Realistic fabric rendering with yarn models	6
Anti-candidiasis functional material for women’s cotton undergarments	6
Finite element analysis on global and local deformation behavior of 3D spacer fabric	6
Environment-independent textile fiber identification using Wi-Fi channel state information	6
Growing ZnO nanowires on aramid fabric for improving the ultraviolet aging property	6
Visual similarity simulation of slub denim based on image processing	6
Physical relationship between resonant frequency and structure parameters of a normal mode helix dipole antenna for an ultra-high frequency radio frequency identification tag thread	6
FocusDet: towards high-quality digital printing fabric defect detection	6
Evaluation of alternative joining methods in softshell fabric types	6
Analysis of electromagnetic transmission characteristics of square loop frequency selective fabrics with different layers	6
Novel materials for low-risk category personal protective clothing for industrial workwear used in hot workplace environments: improved thermal and moisture management attributes	6
Water conservation in garment bleaching using aerosol technology	6
Application of 3D digital technology in design practices within the circular fashion system: Implications for sustainability	6
In situ embedded aromatic yarn based on electrospinning nanofibers loaded with chitosan nanocapsules	6
Dynamics simulation analysis of the melting process of ice on the surface of aramid IIIA fabrics	6
The evolving unity of structural mechanics in stretch-dominant textile architectures	5
Thermal behavior of flexible and breathable sandwich fibrous polyethylene glycol (PEG) encapsulations	5
Yarn quality analysis by using computer vision and deep learning techniques	5
Geometrical modeling of yarn motion and analysis of yarn tension during stitch formation process in warp knitting machines	5
Improvement design of blade profile on rotary wings of winder for synthetic filament: Analysis and experiment	5