Journal of the Textile Institute

Article	Citations
Flow field in micro-triangle of centrifugal composite spinning and the effect of slippage on PA composite nanofibers	98
Influence of duoplasmatron ion source plasma treatment on multi-axial knitted structure reinforced glass fiber composites	33
Layered nonwoven filter embodied with packing density gradient measured by X-ray computed tomography for enhanced filtration performance	33
Fabricating anti-eczema, UV blocking and strong nanocomposite based on Achillea wilhelmsii C. Koch	31
Investigation of the effects of some pile yarn parameters on crucial properties of towels	28
Nonwoven from recycled polyester fibers for thermal insulation applications	25
Performance properties of machine woven carpets produced from splittable microfilament pile yarns	22
Developing a metaheuristic model for the general assembly line balancing optimization based on a new workforce performance index: a case study in the garment industry	20
Mathematical modeling of dynamic yarn input tension on circular weft knitting machine with positive storage feeding	20
Artificial neural networks (ANNs) and response surface methodology (RSM) for optimizing wetting and anti-bacterial properties of woven fabric	20
Research on the PID series control system of a weft-insertion warp knitting machine based on kinematics	19
Long-term permeability tests on clogging and permeability of nonwoven geotextile filtering silty clay	18
Effectiveness of hybrid textile bars in tensile and bond stresses as an alternative to concrete reinforcement	18
Understanding moderated mediating effects and framework towards Chinese element fashion consumption from a cultural perspective	17
Antibacterial and anticancer activity of poly (ɛ-caprolactone)/doxorubicin/ Costus arabicus L. root smoke composite nanofibers against lung cancer	17
Fabric material identification based on Densenet variant networks	16
The dyeing properties of alginate/lyocell blended fabric with reactive dyes	16
Pretreatment of granatum dye solution and its application in eco-dyeing of wool	16
Fiber reinforcement of polymer hybrid sandwich composites using SNiPs: effect of silica nanoparticles on flexural and compressive strength	15
Determination of various fabric defects using different machine learning techniques	15
Forced wetting of hydrophobic flocked pile fabrics	15
Thymol-based Schiff base-loaded poly ( ε -caprolactone) (PCL) electrospun nanofiber mats with anticancer, antimicrobial and antioxidant properties	15
Non-thermal, atmosphere pressure and roll-to-roll plasma treatment for improving the surface characteristics and antistatic solution absorption in polyester fabrics	14
High-performance fiber- and textile-reinforced concrete composite materials for use in construction applications: a review	14
Exploring weave colour quality through the optical mixing of CMY and achromatic yarns in woven artworks	13

Enhancing electrical conductivity, self-cleaning and bactericidal properties of cellulosic fabric by Hinokitiol/nano-ZnO	13
Modeling the flexural rigidity of spunlace nonwoven fabrics	13
Optimising the manufacturing of electrospun nanofibrous structures for textile applications: a machine learning approach	13
Valorisation of sodium lignosulfonate from wood pulping industries for the enhancement of moisture management properties of nylon fabric	13
Uniaxial tensile response of basalt fiber with different structures reinforced fine-grained concrete via acoustic emission monitoring	13
Silicone decorated polycaprolactone electrospun fibrous membranes for oil/water separation	13
Finite-element analysis on the compression-recovery process of cotton fiber assembly	13
Excellent water and moisture resistance of SiO 2 micro–nanoparticles/silicone coating for flexible fabrics	13
Characterization of 3D-printed filament yarns using various parameters	12
Rapid and high adsorption of methylene blue dye onto graphene coated nonwoven fabric using vacuum infusion coating	12
Optimum design of stenter machine hot air supply chamber by coupling CFD & DOE	12
Determining deposits on knit fabrics, yarns, and fibers, from sensor-related treatments	12
Synthesis and characterization of nanofiber of gelatin, polyvinyl alcohol, and chitosan for wound dressing application	12
Fabric defect detection using ACS-based thresholding and GA-based optimal Gabor filter	12
Standardization and optimization of concentration of different mordants on the dyeing efficiency of Lawsonia inermis (Henna) on silk fibre	12
Negative Poisson’s ratio weft knitted continuous filament PP fabric/epoxy resin composites with different loop lengths under impact loading	11
Comparative study of the mechanical properties of glass and Kevlar fiber-reinforced honeycomb composite	11
Effect of stabilising overfeed of draw textured yarns on woven fabric properties	11
Development and characterization of hybrid polymer composite materials with reinforcement of glass/carbon fibers for enhanced mechanical properties: an experimental and numerical approach	11
Streamline video-based automatic fabric pattern recognition using Bayesian-optimized convolutional neural network	11
Development of an optimized pin-based electrospinning method for yarn coating with polymeric nanofibers: effects on mechanical properties and process parameters	11
Highly sensitive and stretchable strain sensor based on modified carboxylic carbon nanotubes/chitosan/polyurethane yarn	11
Study on the influence of constructional parameters on performance of outer layer of thermal protective clothing	11
Unraveling electromagnetic shielding potential: exploring carbon and stainless-steel Weft knitted fabrics	11
Artificial neural network models for predicting breaking strength and abrasion resistance properties of woven fabrics with different chenille yarns	11
Silk-based materials for sustainable soft electronics: structure, properties, and emerging applications	11
The latest research progress on the antibacterial properties of TiO 2 nanocomposites	10
Recent advances on nanofibrous acoustic materials for noise reduction applications	10
Study on antimicrobial properties of fabrics made from embedded silver nanocomposite polyester fibre-yarns and coated with silver nanoparticles	10
Estimation of arterial pressure through cuffs constructed from different fabrics using simulation modelling	10
Entangled value: actor–network configurations and ESG pathways in China’s textile value chain	10
Sustainable textiles through electrospinning: addressing environmental challenges	10
Adhesion and Mechanical Performance of Nanoparticle-Enhanced Textile Composites for Sustainable High-Performance Applications	10
Evaluation on the structure and mechanical property of crimped woven vascular graft with continuous variable cross-sections	10
Exploration of packing density of layered nonwoven fabrics by using X-ray computed tomography for improved filtration performance	10
Modification of poly (vinylidene fluoride-co-hexafluoropropylene) membranes by sulfonated poly (ether ether keton) coating for membrane distillation of textile wastewater	9
Prediction of long-term creep response: accelerated characterization of industrial nylon6,6 and HMLS PET filaments	9
Investigation of the nano-biocarbon treatment on the optical, physical, and mechanical properties of polyester fabrics	9
TiO 2 /rough surface of woven cotton fabrics prepared by spin coating for antibacterial and self-cleaning processes	9
Electrospinning of gelatin nanofibers containing sesamol nanoparticles	9
Multi-response optimization of laser treatment parameters for denim fabrics from pre-consumer cotton by Taguchi-based GRA method	9
Huo Cao: a unique collectively utilized natural textile material and its structure and properties	9
A comprehensive review of recent advances in delignification technology	9
Dynamic mechanical response of carbon nanotube yarns and their in situ electrical measurements	9
A comparative study of physical properties of nonwoven fabrics produced by uni- and bi-directional needles using response surface methodology	9
A computer software developed for designing woven patterns and generating machine readable files for sampling looms	9
Development of a method for evaluating fabric surface contamination by particulate matter using fluorescent particles	9
Additive manufacturing and in-plane testing of plain weft knitting-based metastructures with orthotropic behavior	8
Comparative analysis of the mechanical performance of 3D woven honeycomb composites produced in warp and weft directions	8
Effect of abrasion level on surface handling and thermal conductivity of blended suit fabrics	8

Card clothing with spatially morphological teeth and their application verification on carding machine	8
The through-thickness thermal conductivity and heat transport mechanism of carbon fiber three-dimensional orthogonal woven fabric composite	8
Revaluing wool waste: crafting high-performance wool felt spheres from discarded fibers	8
Machine learning assisted mechanical properties prediction of fine denier polyester fiber	8
Simulating 3D fabric drape models with diversity based on point cloud random resampling and blender	8
Analysis of the tensile stress relaxation of weft-knitted medical compression fabrics in view of the fabric structure	8
Biopolymer-containing formulations to render acrylic fabrics fire resistant and anti-static	8
Characterisation of water hyacinth fibre and effect of alkali on needle-punched nonwoven made from water hyacinth	8
Comfort and functional evaluation of silk/profiled antibacterial polyester fabric	7
Modeling the color coordinates of cotton fabric dyed with natural dyes using Sugeno-multi optimization approach	7
Out-of-plane compression failure calculation for self-lubricating fabric liner based on progressive damage theory	7
Influence of weaving architectures on the physical and mechanical properties of technical textiles based on Moroccan natural fibers	7
Colorimetric properties of Brazilwood-dyed textiles under various dyeing conditions	7
Study on the capillary flow in non-uniform capillary tube based on Poiseuille law	7
Impact of soil type and slope angle on the performance of jute geotextiles in controlling runoff erosion	7
Sustainable dispersant-free dyeing of poly(lactic acid) with microbial prodigiosins in decamethylcyclopentasiloxane (D5) medium	7
Modeling of the adsorption of acidic dyes by chitosan using both kinetic and thermodynamic comparisons	7
Interlaminar, free vibration, HDT and water absorption properties of braided flax woven fabric PLA biocomposites	7
Textile finishing for bacterial cellulose modification: organic acid-catalyzed cellulosic acetylation	7
A polyester- stainless steel based smart wristband sensor for skin temperature monitoring	7
Optimised fluorine free polysiloxane based water repellent for cellulosic fabric	7
Durable antimicrobial and UV-protective cotton fabric based on chitosan modified Schiff base and their Cu (II) and Zn (II) metal complexes for potential application in medical textiles	7
Nanofibers and modern solar cell a short review	7
Superior stability and efficiency in triboelectric nanogenerators with dual metal coating on nylon	7
Acrylic acid incorporated nanocellulose/acrylamide ion-conductive hydrogels for wearable sensors	7
Formulation and characterization of super absorbent copolymer AA, ACN-grafted sodium acrylate for feminine napkin	7
Optimising woven fabric mechanical properties for composite application: long and short float analysis	7
Polyester/cotton double-layer fabric with asymmetric wettability structure for unidirectional moisture transport	7
Nomination and commentary on ‘Design, the environment and textiles: developing strategies for environmental impact reduction, by Fletcher K. T., Journal of The Textile Institute, Volume 89:3, 72–80, 1	7
Development of suitable washing methods for textile relics adsorbing composite organic/inorganic stains	7
Experimental study on thermal and moisture comfort of infant adjustable ventilated cushions in hot environments	7
Three-dimensional orthogonal woven hybrid fabrics in X band frequency region for electromagnetic shielding effectiveness	7
Development of design method for female body armor	6
Experimental and numerical investigation of pressure deformation of human body for constructing digital elastic body model: waist–abdomen part	6
Preparation and properties of silanation-modified nanocellulose-reinforced polyvinyl alcohol nanocomposites	6
Effect of weave structures and thread densities on the cover factor and mechanical properties of cotton spandex woven fabrics	6
Study on the wear-ability of high-performance nylon/nylon/cotton woven fabrics based on core-wrapped composite yarn with double filament	6
Pre-heat setting integration for improved fabric mechanical properties and cost efficiency in spandex-based knitted fabrics	6
Tensile and stress relaxation characteristics of hybrid PLA-PVA/CS yarns loaded with antibiotic tetracycline hydrochloride used as suture	6
In-situ decoloration of cotton-based textile waste during fiber-to-fiber recycling at mild conditions	6
Thermal dynamics of textile fibers: enhancing outdoor comfort through exothermic and endothermic interactions	6
Development and characterization of lanolin incorporated electrospun nanofibers for nursing pads	6
Optimal process parameter and morphology characterization of self-reinforcing composite structural yarns	6
Analysis of wicking and drying behaviour of nylon 6 knitted fabrics	6
Rice stubble: cotton fly waste composites for acoustic applications	6
A benign synergism of O 2 plasma and protein biopolymer for improving some properties of polyester fabrics	6
Dynamic behavior of nanofibrous bioscaffolds	6
Influence of selected parameters of the substrate of a microstrip textile antenna on changes in its resonance frequency under the influence of humidity	6
Graphene-coated nylon nonwoven for pressure sensing application	6
Thermal resistance and bursting strength analysis of multilayer needle-punched bamboo/polyester nonwoven batt	6
Comparison of composite yarns fabricated with ring spinning technologies for extreme environment	6
Research on the distribution law of breaking strength and weak point of vortex spinning yarn based on data mining	6
Development of polypyrrole-coated cotton thermoelectric fabrics	6
Thermostable, reusable, waterproof, and breathable PTFE coated PAI nanofiber membrane for protective application	6
Construction of lysine-functionalized flexible porous carbon nanofiber membrane for high-efficiency formaldehyde adsorption	6
Investigation the yarn to yarn static and kinetic friction based on the response surface method	6
Comparative analyses of a maturity distributional parameter evaluating immature fibre contents by references microscopic analysis and conventional fibre measurement methods	6
Experimental design for determining the factors influencing the filtration efficiency of solution-blown spun polylactic acid filters	6
Yarn breakage detection in ring spinning through ring temperature drop	6
Geometrical modeling and experimental validation of 3D woven honeycomb fabric for lightweight aircrew helmet liner manufacturing	6
Properties of cationized alginate fibers dyed with direct dyes	6
Soybean ( Glycine max ) fibre: studies in extraction and characterisation	6
Investigation of the effect of different mordant substances and nonionic surfactant on cotton fabrics dyed with eucalyptus leaf extract by using IR dyeing machine	6
Flexible antibacterial silica aerogel-polypropylene nonwoven fabrics for effective air purification	6
The effect of cyclic wrinkling on the durability of waterproof breathable functional outdoor materials for sportswear	6
A pattern adjustment method for ice speed skating suits based on pressure analysis	5
Ingredient-induced fiber degradation in wet wipes	5
Thermal insulation behaviour of aluminium microperforated foil integrated multilayered e-glass nonwoven hybrid panels	5
Development of self-sanitizing casual wear: an anti-microbial protection approach	5
The mechanical properties of Kevlar three-dimensional angle-interlock fabrics and composites	5
Effect of ambient temperature, metabolic heat and clothing insulation on the required external active heating for the survival of humans exposed to sub-zero temperatures	5
Studies on the stab resistance and ergonomic comfort behaviour of multilayer STF-treated tri-component woven fabric and HPPE laminate composite material	5
Fashion style transfer: enhancing efficiency and aesthetic with a novel two-stage neural network	5
Experimental and statistical analysis of flexural behavior of glass fiber reinforced polyester (GFRP) molded grating panels	5
Effect of incident angle of oblique-blowing airflow on yarn in pneumatic tucked-in selvedge apparatus	5
Design and measurement of cost-balanced and electronic-efficient embroidered textile electrodes	5
Research on Siro fancy yarn properties based on the novel drafting rubber roller	5
Structure forming and characterization of compressive properties of three-dimensional woven fabric composites based on e-entrant honeycomb structure	5
Structural properties and diameter prediction of fine denier polyester fiber based on machine learning algorithms	5
An experimental study on the effects of introducing carbon nanotube on low velocity impact behavior of carbon/aramid fiber reinforced intra-ply hybrid composites	5

Impact of machine width and gauge on finished fabric quality: experimental insights from industry-produced cotton fabrics	5
Defining textile technology as a scientific discipline: a historical perspective	5
Nomination and commentary on ‘Note on the compressibility of wool, by Van Wyk C.M., Journal of the Textile Institute, Transactions, 37:12, T285–T292, 1946, and published online on 05 Dec 2008. https:/	5
Preparation and the influence of twist factor on cut resistance performance of Kevlar short fiber covered yarn fabric	5
Improved energy absorption of 3D orthogonal woven glass fiber composites with flax yarn hybridization	5
Surface evaluation of PET/PA nonwoven fabrics for next-generation durable apparel textiles	5
Weft-angle detection based on sub-pixel precision fitting	5
Effect of quilting pitch and sewing thread type on the fragment protective performance of para-aramid fabrics used in military body armour	5
Soft computing procedure to optimize the electrospinning parameters of polyacrylonitrile nanofibrous air filter	5
Effect of mesoporous silica/epoxy coating on different woven fabrics for oil–water separation	5
Study on cut-protective performance of composite yarn-based knitted UHMWPE fabrics for industrial safety applications: influence of stitch density, repeated rubbing, washing, and fabric stretchability	5
Influence of airflow resistance on acoustic behaviour of needle-punched nonwoven structures	5
An evaluation of aromatic hydrocarbons in recycled PET fibers by a reliable and effective static headspace GC-FID method	5
Anti-bacterial nanofibers and their biomedical applications – a review	5
Development of dual-core spun yarn using different fiber as a core by hamel twisting (elasto twist) technique and its impact on the denim fabric performance	5
Nomination and commentary on ‘Comparative thermophysiological tests on blankets made from wool and acrylic-fibre–cotton blends, by Umbach K. H., The Journal of the Textile Institute, 77:3, 212-222,198	5
Optimization of carbon fiber patch end-effector design and research on reduced order models for digital twins	5
Bioprospecting Hypoxylon fendleri for pigment production and assessment of its dyeing efficacy on silk fabric	5
Evaluating a hybrid fabric made by weaving acrylic yarn with copper wires for enhanced heat and liquid transfers	5
Grafting of keratin onto O 2 -plasma-irradiated polypropylene fabrics for induced dyeability and durable hygroscopic properties	4
Green camouflage coating for fabric screen printing	4
An investigation of woven fabric density measurement using image analysis based on RTV-SFT	4
Influence of the number of carded non-woven layers on mechanical and acoustic performance	4
A new method of dyeing keratin-containing substrates and the effect of temperature	4
Cocoon, fibre, and yarn characteristics of an endangered indigenous silkworm variety: Hatay Yellow	4
Fabrication of high-content β-phase CNTs/ZnO@PVDF nanofibrous mats with microgrid structure and application in flexible piezoelectric sensor	4
Polyester fabric with tunable flame retardant and hydrophobic properties treated with nano carbon black and micro carbonyl iron through various application methods	4
Dope-dyed polyurethane electrospun nanofibers	4
Formula development of sizing for basalt fiber. Part I: Role of film former	4
Using various concentrations of SiO 2 aerogel for oil wicking, spreading, and interception tests of 3D weft-knitted spacer fabrics	4
Design and manufacture of hybrid mesh for hernia treatment	4
Electrical properties of conductive 2-color Jacquard weft knitted fabric with birdseye backing	4
Investigating how the dye colour is impacted when chemically separating polyester-cotton blends	4
The effect of glycine treatment on the morphology and tensile properties of cotton yarn	4
Acid and alkali chemical treatments on synthetic and natural cellulosic, fibroin and keratin-based fabrics: study of structural changes	4
Research on ultraviolet protection of dyed silk fabric with extracts from Clitoria ternatea flowers	4
Evaluation of the effect of structural parameters on the compression behaviour of woven spacer fabrics	4
Characterization of cellulase by Cellvibrio polysaccharolyticus and assessment of its application in the textile industry	4
Fiber for recycled aggregate concrete reinforcement: a review	4
Global state of man-made filaments	4
Multi-level structure and properties of pattra leaf fibers	4
Revival of cultural textile arts: creation of innovative weaving technology for fabricating traditional Chinese non-fixed four-warp leno	4
Assessment and management of body odor in activewear	4
Modeling and validation of the relationship between yarn consumption and dynamic tension in warp knitting process	4
A fabric defect detection model based on improved Swin Transformer with large kernel attention	4
Characterization of bending properties of ultra-fine metal fibers and evaluation of testing methods	4
Effect of strain rate and temperature on the crystallization behavior of amorphous poly(ethylene terephthalate) fibers during superdrawing	4
The effects of dyeing and finishing processes on seam efficiency of cotton fabrics	4
Cotton fibre elongation: a review	4
Wearable textile-based sensor for sweat sodium chloride monitoring applications	4
An energy-efficient vacuum system as an alternative to the inefficient use of compressed air for the yarn suction gun	4
Experimental investigation on the bond-slip behavior between TRC-confined concrete and rebars after exposure to elevated temperatures	4
Biotherapeutic textiles as functional biomaterials: a comprehensive review	4
Tuning drafting zone parameters for polyester yarn within a ring spinning system: modeling and optimization	4
Additive manufacturing of weft knitted and braided fabric structures with fused deposition modeling	4
Investigation of fetal ECG signal using textile-based electrodes	4
A lawsone based novel disperse dyes with DHPMs scaffold: dyeing studies on nylon and polyester fabric	4
Exploring the mechanical potential of 3D woven solid structures for car seat cover	4
Research on oil adsorption properties of yak hair felt and its application	4
Mechanical durability of plasma-treated wool pile carpets under static and dynamic loading conditions	4
Cotton fabric moisture content quantitative detection method based on hyperspectral imaging	4
Stealth colours for camouflage textiles	4
A study of new washing machine for the care of delicate garments by testing on wool and silk fabrics	4
Development of natural latex-based dip coating for synthetic yarns reinforced rubber composite materials	4
Automatic recognition of dark woven fabric weave patterns using global region-based active contour model	4
Textile-based quad-band electromagnetic absorber design for wearable applications	4
Mechanical and electrothermal properties of two-dimensional fabric reinforced by carbon nanotube strips composites	4
Design and development of ultra-high molecular weight polyethylene seamless sportswear	4
Factors affecting the strength of camel wool fibers: a combined iTRAQ and fiber characteristics study	4
Comparative evaluation of medullation types and their respective fiber diameter in alpacas from seven regions of Peru	4
Increasing the adhesion force of electrospun PAN nanofibers web to nonwoven polyester with using dimethylformamide solvent	4
Nomination and commentary on ‘The “handle” of cloth as a measurable quantity by Peirce F. T., Journal of the Textile Institute Transactions, 21:9, T377–T416, 1930, and published online on 11 Dec 2008.	4
Assessment of a unique reinforcement construction on mechanical behaviour of composite structures	4
Automatic seam pucker evaluation using multi-view stereo vision	4
Vortex characteristics in rotating rotor cup of rotor spinning based on large eddy simulation	4
Evaluation & development of family-size tent suitable for the summer time of Hong Kong	4
GDS-YOLO11: a multi-scale defect detection method for printed fabrics	4
Development and characterization of conductive textile (polyester fabric) for wearable electronics by using electroless metallization	4
Spectral preprocessing and instrumentation for the identification of camelid and goat fibers using artificial intelligence	4
Effect of bond temperature and bond pattern on fuzz formation in thermally point-bonded spunbond nonwovens	4
Solvent-based stripping method for dyed cellulosic textiles	4
Preparation, characterization, and conductivity properties of an alginate-silver nitrate hydrogel composite on biodegradable polylactic acid nonwoven	4
Examination of laser radiation effect on silk fabrics dyed with different concentrations of cochineal using iron and alum mordants	4
Investigating thermal-wet comfort features of double-face knitted fabrics by forearm test and objective transfer measurements	4
Measurements-to-body: 3D human body reshaping based on anthropometric measurements	4
Simple and facile fabrication of carboxymethylated cellulose nanofibrils one-side-coated cotton non-woven fabrics for beauty facial mask sheets	4
Correction	4