Science Progress

Papers
(The TQCC of Science Progress is 4. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-04-01 to 2024-04-01.)
ArticleCitations
COVID-19 pandemic: A review of the global lockdown and its far-reaching effects294
Machine learning on small size samples: A synthetic knowledge synthesis77
Effect of COVID-19 pandemic on mental health among Bangladeshi healthcare professionals: A cross-sectional study67
A new regularization method for dynamic load identification43
Origami spring–inspired metamaterials and robots: An attempt at fully programmable robotics33
Factors associated with gender and sex differences in anxiety prevalence and comorbidity: A systematic review32
Tooth root resorption: A review31
Mechanics of non-Newtonian blood flow in an artery having multiple stenosis and electroosmotic effects30
Inflammatory cytokines TNFα, IL-1β, and IL-6 are induced in endotoxin- stimulated microglia through different signaling cascades30
Use of N-Acetylcysteine at high doses as an oral treatment for patients hospitalized with COVID-1929
Thermal efficiency of radiated tetra-hybrid nanofluid [(Al2O3-CuO-TiO2-Ag)/water]tetra under permeability effects over vertically aligned cylinder subject t28
Digital transformation, smart technologies, and eco-innovation are paving the way toward sustainable supply chain performance27
Recent progress in battery electric vehicle noise, vibration, and harshness27
Urgent call for mass immunization against coronavirus in Bangladesh26
Intelligent based hybrid renewable energy resources forecasting and real time power demand management system for resilient energy systems24
Resonant Suppression Method Based on PI control for Serial Manipulator Servo Drive System24
A review of the mechanism of DDIT4 serve as a mitochondrial related protein in tumor regulation22
COVID-19 vaccine-induced immune thrombotic thrombocytopenia: A review of the potential mechanisms and proposed management21
Generalized model for conic-V-shaped flexure hinges20
A better understanding of the role of new energy and green finance to help achieve carbon neutrality goals, with special reference to China20
Heat transport mechanism in glycerin-titania nanofluid over a permeable slanted surface by considering nanoparticles aggregation and Cattaneo Christov thermal flux20
Application of ANN to predict performance and emissions of SI engine using gasoline-methanol blends19
Evaluation of the selection of proper metro and tram vehicle for urban transportation by using a novel integrated MCDM approach19
MHD flow of nanofluid over moving slender needle with nanoparticles aggregation and viscous dissipation effects19
Comparison of clinical manifestations, pre-existing comorbidities, complications and treatment modalities in severe and non-severe COVID-19 patients: A systemic review and meta-analysis19
Complex dynamical behaviors of a novel exponential hyper–chaotic system and its application in fast synchronization and color image encryption19
Eigenfunction expansion method for peristaltic flow of hybrid nanofluid flow having single-walled carbon nanotube and multi-walled carbon nanotube in a wavy rectangular duct18
Unsteady three-dimensional nodal stagnation point flow of polymer-based ternary-hybrid nanofluid past a stretching surface with suction and heat source18
Convective heat transfer for Peristaltic flow of SWCNT inside a sinusoidal elliptic duct18
Geospatial analysis of wetlands based on land use/land cover dynamics using remote sensing and GIS in Sindh, Pakistan18
Entropy generation in thermally radiated hybrid nanofluid through an electroosmotic pump with ohmic heating: Case of synthetic cilia regulated stream17
Circulating furin, IL-6, and presepsin levels and disease severity in SARS-CoV-2–infected patients16
The role of repetitive transcranial magnetic stimulation in the treatment of cognitive impairment in stroke patients: A systematic review and meta-analysis15
Numerical analysis and application of the construction method for the small interval tunnel in the turn line of metro15
A topology optimization method of robot lightweight design based on the finite element model of assembly and its applications15
Can we rely on COVID-19 data? An assessment of data from over 200 countries worldwide15
Perception towards E-learning and COVID-19 on the mental health status of university students in Malaysia15
Publications and retracted articles of COVID-19 pharmacotherapy-related research: A systematic review15
Crossbreed impact of double-diffusivity convection on peristaltic pumping of magneto Sisko nanofluids in non-uniform inclined channel: A bio-nanoengineering model14
Double-diffusive stagnation point flow over a vertical surface with thermal radiation: Assisting and opposing flows14
Multi-element determination of essential and toxic metals in green and roasted coffee beans: A comparative study among different origins using ICP-MS14
Compressor fault diagnosis system based on PCA-PSO-LSSVM algorithm13
The impact of economic growth, FDI, and innovation on environmental efficiency of the logistics industry in provinces along the belt and road in China: An empirical study based on the panel Tobit mode13
Optimization of spatial pipeline with multi-hoop supports for avoiding resonance problem based on genetic algorithm13
Effects of thermal stress, magnetic field and rotation on the dispersion of elastic waves in an inhomogeneous five-layered plate with alternating components13
Application of a new one-dimensional deep convolutional neural network for intelligent fault diagnosis of rolling bearings12
Obstacle distance measurement based on binocular vision for high-voltage transmission lines using a cable inspection robot12
Glutathione and its dependent enzymes’ modulatory responses to neonicotinoid insecticide sulfoxaflor induced oxidative damage in zebrafish in vivo12
Premature rejection in science: The case of the Younger Dryas Impact Hypothesis12
World scientists’ warnings into action, local to global12
Polymeric hybrid nanocomposites processing and finite element modeling: An overview12
Design of active fault-tolerant control system for Air-fuel ratio control of internal combustion engines using fuzzy logic controller12
Springback angle prediction of circular metal tube considering the interference of cross-sectional distortion in mandrel-less rotary draw bending12
Fabrication of polyvinyl alcohol based fast dissolving oral strips of sumatriptan succinate and metoclopramide HCL12
Race to achieving sustainable environment in China: Can financial globalization and renewable energy consumption help meet this stride?12
Silver nanoparticles synthesized using leaf extract of Azadirachta indica exhibit enhanced antimicrobial efficacy than the chemically synthesized nanoparticles: A comparative study12
Entropy and stability analysis on blood flow with nanoparticles through a stenosed artery having permeable walls12
Dynamic characteristics analysis of planetary gear system with internal and external excitation under turbulent wind load12
Research on collaborative innovation among enterprises in green supply chain based on carbon emission trading12
Research on large deformation control technology of tunnels in squeezing rock and its application11
Use of diesel and emulsified diesel in CI engine: A comparative analysis of engine characteristics11
Dynamic characteristic analysis of vertical screw conveyor in variable screw section condition11
Rationale, design, and methods of a randomized, controlled, open-label clinical trial with open-label extension to investigate the safety of vosoritide in infants, and young children with achondroplas11
Management of colorectal cancer in the era of COVID-19: Challenges and suggestions11
Mortality and risk factors for COVID-19 in hemodialysis patients: A systematic review and meta-analysis11
Thermal radiation effect on unsteady mixed convection boundary layer flow and heat transfer of nanofluid over permeable stretching surface through porous medium in the presence of heat generation11
Analysis of the characteristics of outpatient and emergency diseases in the department of otolaryngology during the “COVID-19” pandemic11
Adiposity and Cardiometabolic Risk assessment Among University Students in Saudi Arabia10
The influence of the inter-ply hybridisation on the mechanical performance of composite laminates: Experimental and numerical analysis10
Stress in teachers of children with neuro-developmental disorders: Effect of blended rational emotive behavioral therapy10
Anxiety and fear related to coronavirus disease 2019 assessment in the Spanish population: A cross-sectional study10
Pathologies associated with the mandibular third molar impaction10
Differentially expressed genes PCCA, ECHS1, and HADH are potential prognostic biomarkers for gastric cancer10
The mediating role of self-compassion between proactive coping and perceived stress among students10
Development and criterion validity of the COVID-19 anxiety and fear assessment scale: a cross sectional study10
Diverse thermophilic Bacillus species with multiple biotechnological activities are associated within the Egyptian soil and compost samples10
Numerical and experimental investigation on the oblique water entry of cylinder9
Effect of vitamin C in critically ill patients with sepsis and septic shock: A meta-analysis9
Risk Factors of Early Childhood Caries Among Preschool Children in Eastern Saudi Arabia9
Impact of partial slip and lateral walls on peristaltic transport of a couple stress fluid in a rectangular duct9
Artificial bee colony algorithm based PID controller for steel stripe deviation control system9
An online survey and review about the awareness, coping style, and exercise behavior during the “COVID-19 pandemic situation” by implementing the cloud-based medical treatment technology system in Chi9
The impact of industrial robots application on air pollution in China: Mechanisms of energy use efficiency and green technological innovation9
The use of saliva steroids (cortisol and DHEA-s) as biomarkers of changing stress levels in people with dementia and their caregivers: A pilot study9
Euthanasia in adults with psychiatric conditions: A descriptive study of the experiences of Belgian psychiatrists9
Investigation of the spray formation and breakup process in an open-end swirl injector9
Optimal control for hybrid magnetically suspended flywheel rotor based on state feedback exact linearization model9
Effects of oxyhydrogen gas induction on the performance of a small-capacity diesel engine9
History of contact with the SARS-COV-2 virus and the sense of coherence in the development of psychological distress in the occupational health professionals in Spain9
Numerical and experimental studies of gas–liquid flow and pressure drop in multiphase pump valves9
Nonlinear dynamics of rotor system supported by bearing with waviness9
A novel model for low-cycle multiaxial fatigue life prediction based on the critical plane-damage parameter9
Application of an innovative ridge-ladder-shaped polycrystalline diamond compact cutter to reduce vibration and improve drilling speed9
Identification of hub ubiquitin ligase genes affecting Alzheimer’s disease by analyzing transcriptome data from multiple brain regions9
Engineering application and study on polyurethane-corrugated steel plate insulation lining of existing railway tunnel in seasonal frozen area8
Vitamin D deficiency as a predictor of severity in patients with COVID-19 infection8
MiR-326 mediates malignant biological behaviors of lung adenocarcinoma by targeting ZEB18
Selenium in wastewater can be adsorbed by modified natural zeolite and reused in vegetable growth8
Current development and future challenges in microplastic detection techniques: A bibliometrics-based analysis and review8
Optimal design of blade in pump as turbine based on multidisciplinary feasible method8
A review on high velocity compaction mechanism of powder metallurgy8
Augmented renal clearance. An unnoticed relevant event8
The significances and clinical implications of cholesterol components in human breast cancer8
An efficient multi-factor geometry optimization based on motion analysis and resonance response for hinged double-body floating wave energy converter8
Pulse-heating infrared thermography inspection of bonding defects on carbon fiber reinforced polymer composites8
Research on the elastic–plastic external contact mechanical properties of cylinder8
Review of wheeled mobile robot collision avoidance under unknown environment8
The usability of ventilator maintenance user interface: A comparative evaluation of user task performance, workload, and user experience8
Changes in mental health during the COVID-19 crisis in Romania: A repeated cross-section study based on the measurement of subjective perceptions and experiences8
Global analysis of gene expression signature and diagnostic/prognostic biomarker identification of hepatocellular carcinoma8
Protective properties of Spondias mombin Linn leaves on redox status, cholinergic dysfunction and electrolyte disturbance in cyanide-intoxicated rats8
Body surface area-based equivalent dose calculation in tree shrew8
Integrated neural network model with pre-RBF kernels8
PANX2 and brain lower grade glioma genesis: A bioinformatic analysis8
Quality of life and social support: Perspectives of Saudi Arabian stroke survivors7
Attitudes and beliefs of Spanish healthcare professionals during the COVID-19 pandemic7
Trajectory tracking control of 7-DOF redundant robot based on estimation of intention in physical human-robot interaction7
Spontaneous colonic perforation in adults: Evaluation of a pooled case series7
Adaptive fuzzy PID cross coupled control for multi-axis motion system based on sliding mode disturbance observation7
Model predictive control of steering torque in shared driving of autonomous vehicles7
Machine learning in the evaluation and prediction models of biochar application: A review7
Numerical and experimental characterization of splitter blade impact on pump as turbine performance7
Seismic response of CRTS II ballastless track-bridge system considering the damage of track structure7
Bioinformatic analysis of potential hub genes in gastric adenocarcinoma7
Robust optimization approach to emergency mobile facility routing7
Linear active disturbance rejection control for the electro-hydraulic position servo system7
Numerical investigation of Miller cycle with EIVC and LIVC on a high compression ratio gasoline engine7
Linezolid-induced black hairy tongue in a patient with multidrug-resistant tuberculosis: A case report7
Effect of vitamin D supplementation on benign paroxysmal positional vertigo recurrence: A meta-analysis7
Compositional analysis of bio-oils from hydrothermal liquefaction of tobacco residues using two-dimensional gas chromatography and time-of-flight mass spectrometry7
Arming the troops: Post-translational modification of extracellular bacterial proteins7
Optimization and analysis of a grounded type dynamic vibration absorber with lever component7
Research on a nonlinear quasi-zero stiffness vibration isolator with a vibration absorber7
Comparison of peripherally inserted central catheters and totally implanted venous access devices as chemotherapy delivery routes in oncology patients: A retrospective cohort study7
Performance analysis of compliant cylindrical intershaft seal7
Free vibration and damping analysis of the cylindrical shell partially covered with equidistant multi-ring hard coating based on a unified Jacobi-Ritz method7
Safety evaluation of freeway interchange merging areas based on driver workload theory6
Numerical study for removing wax deposition by thermal washing for the waxy crude oil gathering pipeline6
Clinical relevance of Tai Chi on pain and physical function in adults with knee osteoarthritis: An ancillary meta-analysis of randomized controlled trials6
Application of augmented reality in museums – Factors influencing the learning motivation and effectiveness6
Numerical modeling for the frame structure of light van-type electric truck6
Incidence and profile of acute intoxication among adult population in Najran, Saudi Arabia: A retrospective study6
Multiple parameters and target optimization of splitter blades for axial spiral blade blood pump using computational fluid mechanics, neural networks, and particle image velocimetry experiment6
Mutagenicity and genotoxicity in juvenile African catfish, Clarias gariepinus exposed to formulations of glyphosate and paraquat6
Study on natural convection heat transfer in a closed cavity with hot and cold tubes6
Fully convolutional network-based multi-output model for automatic segmentation of organs at risk in thorax6
Integration of various protein similarities using random forest technique to infer augmented drug-protein matrix for enhancing drug-disease association prediction6
Endovascular revascularization of symptomatic chronic total occlusions of the internal carotid artery using a proximal balloon protection device6
Adaptive robust cross-coupling position synchronization control of a hydraulic press slider-leveling6
An assessment of the impact of structure and type of microplastics on ultrafiltration technology for microplastic remediation6
Cutting speed follow-up adjusting system of bidirectional electric drive side cutter for rape combine harvester6
Optimization design of curved outrigger structure based on buckling analysis and multi-island genetic algorithm6
An identification method of the weak link of stiffness for cantilever beam structure6
Interconnection between the role of blockchain technologies, supply chain integration, and circular economy: A case of small and medium-sized enterprises in Pakistan6
Petrology and mineralogy of the Viñales meteorite, the latest fall in Cuba6
Identification of ferroptosis-associated genes exhibiting altered expression in response to cardiopulmonary bypass during corrective surgery for pediatric tetralogy of fallot6
Evaluation of sealing performance of a compression packer at high temperature6
Rivaroxaban for cancer-associated venous thromboembolism6
Selection and techno-economic analysis of hybrid ground source heat pumps used in karst regions6
Preliminary injury risk estimation for occupants involved in frontal crashes by combining computer simulations and real crashes6
Importance of brain alterations in spinal cord injury6
Social media (Facebook) improper use and the influence of sleeping quality in Taiwan’s university students6
Transcutaneous auricular vagal nerve stimulation inhibits hypothalamic P2Y1R expression and attenuates weight gain without decreasing food intake in Zucker diabetic fatty rats6
Physiologic and pathophysiologic roles of AKAP125
A method to predict electric vehicles’ market penetration as well as its impact on energy saving and CO2 mitigation5
Investigation of the transport characteristics of Pb(II) in sand-bone char columns5
Experimental and simulation study on chatter stability region of integral impeller with non-uniform allowance5
Eltrombopag improves refractory thrombocytopenia in patients with Sjögren's syndrome5
APLN: A potential novel biomarker for cervical cancer5
Multi-UAV cooperative reconnaissance mission planning novel method under multi-radar detection5
Research on innovative plug-in hybrid electric vehicle comprehensive energy consumption evaluation method based on statistic energy consumption5
Research on control effectiveness of fluidic thrust vectoring5
Prevalence of polypharmacy and risk of potential drug-drug interactions among hospitalized patients with emphasis on the pharmacokinetics5
Rumex nervosus could alleviate streptozotocin-induced diabetic nephropathy in rats by activating Nrf2 signaling5
Disease burden of liver cancer attributable to specific etiologies in China from 1990 to 2019: An age-period-cohort analysis5
The first complete chloroplast genome sequences in Resedaceae: Genome structure and comparative analysis5
A novel dynamic integral sliding mode control for power electronic converters5
Response surface methodology application on lubricant oil degradation, performance, and emissions in SI engine: A novel optimization of alcoholic fuel blends5
The effects of minute vortex generator jet in a turbulent boundary layer with adverse pressure gradient5
Inhibitory action of halogen-free fire retardants on combustion and volatile emission of bituminous components5
Dog-related activities and human well-being in Brazilian dog owners: A framework and cross-cultural comparison with a British study5
Development of Al–Mg–Si alloy performance by addition of grain refiner Al–5Ti–1B alloy5
A new method for cylindricity error evaluation based on increment-simplex algorithm5
Theoretical modeling of the vertical stiffness of a rolling lobe air spring5
Understanding public opinion regarding organ donation in China: A social media content analysis5
Influence of boundary conditions on three-dimensional vibration characteristics of thick rectangular plates5
Socio-cognitive analysis of farmers’ water conservation behaviour: The case of the Kavar plain, Iran5
Friction reduction mechanism of glycerol monooleate-containing lubricants at elevated temperature - transition from physisorption to chemisorption5
Evaluation of the energy consumption of container diesel trucks in a container terminal: A case study at Klaipeda port5
Study on dynamic sealing performance of combined sealing structure of telescopic type of downhole robot by using HTHP coupling method5
Efficacy of tocilizumab in COVID-19: A review of the current evidence5
Microplastics in soil and freshwater: Understanding sources, distribution, potential impacts, and regulations for management5
A comprehensive review of fault diagnosis and fault-tolerant control techniques for modular multi-level converters5
System dynamics kinetic model for predicting biogas production in anaerobic condition: Preliminary assessment5
Identification methods of charged particles based on aero-engine exhaust gas electrostatic sensor array5
Shear performance of single-keyed dry joints between reactive power concrete and high strength concrete in push-off tests5
Genome-wide identification of simple sequence repeats and development of polymorphic SSR markers in swamp eel (Monopterus albus)5
CFD analysis on blood flow inside a symmetric stenosed artery: Physiology of a coronary artery disease5
Damage detection based on output-only measurements using cepstrum analysis and a baseline-free frequency response function curvature method5
Plant-based model for the visual evaluation of electroporated area after irreversible electroporation and its comparison to in-vivo animal data4
Depressive symptoms in primary health care attendees in Sebeta Town, Ethiopia: Prevalence, associated factors, and detection by health workers4
Research on AGV trackless guidance technology based on the global vision4
Experiment investigation of injection parameters effects on injection stability of a high pressure common rail system4
Development the method of pipeline bending strain measurement based on microelectromechanical systems inertial measurement unit4
To join the rebuild or not? An exploration of the factors influencing the public's intention to participate in urban renewal4
Identification of the 11-lncRNA signatures associated with the prognosis of endometrial carcinoma4
Evaluation of mining capacity of mines using the combination weighting approach: A case study in Shenmu Mining Area in Shaanxi Province, China4
Three-dimensional discrete element simulation of the runaway vehicle deceleration process on the arrester bed of truck escape ramps4
Deep learning based real-time tourist spots detection and recognition mechanism4
The role of radiotherapy in neuroendocrine cervical cancer: SEER-based study4
Distribution law of floor stress during mining of the upper protective coal seam4
Identification of key genes associated with lung adenocarcinoma by bioinformatics analysis4
Risk of device-related thrombosis following short-term oral anticoagulation with low-dose dabigatran versus warfarin after Watchman left atrial appendage occlusion4
Nonlinear behavior of disk spring with complex contact state4
NLRX1 can counteract innate immune response induced by an external stimulus favoring HBV infection by competitive inhibition of MAVS-RLRs signaling in HepG2-NTCP cells4
Temporal and spatial evolution and influencing factors of urban ecological total factor productivity in the Yellow River basin under strong sustainable development4
Investigations on system integration method and dynamic performance of electromechanical actuator4
Construction of an immune-related gene signature to predict survival and treatment outcome in gastric cancer4
Effect of conglomeration gradation on loess shear strength with different water content4
Chitosan nanoparticles as a promising candidate for liver injury induced by 2-nitropropane: Implications of P53, iNOS, VEGF, PCNA, and CD68 pathways4
Sound absorption performance of a conch-imitating cavity structure4
Protective effects of baicalin on caerulein-induced AR42J pancreatic acinar cells by attenuating oxidative stress through miR-136-5p downregulation4
Experimental investigation of the flexural fatigue performance of plain woven basalt fiber/epoxy4
HMGCS2 in metabolic pathways was associated with overall survival in hepatocellular carcinoma: A LASSO-derived study4
False cue influence on motion cue quality for 10 motion cueing algorithms4
Parameterization of energy cycles between the hemispheres4
The investigation of intraspecific characteristics and comparative analyses of the complete mitochondrial genome of Stegobium paniceum (Linnaeus, 1758) (Coleoptera: Ptinidae) assembled from pub4
Numerical simulation of the influence of pipe length on explosion flame propagation in open-ended and close-ended pipes4
Esophagitis dissecans superficialis associated with acute transoral paraquat poisoning: Clinical study of 15 cases4
The development of input-monitoring system on biofuel economics and social welfare analysis4
Hydraulic structure design and downhole flow field optimization of geophysical drill bits in a limestone stratum4
Fatigue life prediction of brake discs for high-speed trains via thermal stress4
The miR-146b-5p promotes Ewing’s sarcoma cells progression via suppressing the expression of BTG24
Research on cutting performance and fatigue life of conical pick in cutting rock process4
A new evaluation and prediction model of sound quality of high-speed permanent magnet motor based on genetic algorithm-radial basis function artificial neural network4
Two cosine wave elastic-plastic contact model4
Arthroscopic triangular fibrocartilage complex repair: A biomechanical comparison of anchor and pull-out techniques in Atzei type II lesions4
Alterations of IL-1beta and TNF-alpha expression in RAW264.7 cell damage induced by two samples of PM2.5 with different compositions4
A solitary giant neurofibroma of inguinal region: A case report4
A study on heat transfer load in large space buildings with stratified air-conditioning systems based on building energy modeling: Model validation and load analysis4
A novel ultrasonic inspection method of the heat exchangers based on circumferential waves and deep neural networks4
Mechanical behavior of sealed waterproof for shield tunnel segment joint under different assembling ellipticity4
The training needs of critical care nurses: A psychometric analysis4
Global publication trends and hotspots of molecular biomarkers in DILI from 1991 to 2020: A 30-year bibliometric analysis4
Does green credit really increase green technology innovation?4
A prediction model of thrust force for drilling of bidirectional carbon fiber–reinforced carbon matrix composites4
Mechanical properties and metallurgical features of two similar endodontic rotary instruments with different heat treatments (FireWire™ and Gold)4
Modeling analysis and lightweight design for an axle hub considering stress and fatigue life4
Experimental study on dynamic thermal environment of passenger compartment based on thermal evaluation indexes4
Bioinformatics study on genes related to a high-risk postoperative recurrence of lung adenocarcinoma4
0.049281120300293