OOIR: Observatory of International Research

Papers

(The TQCC of Pure and Applied Chemistry is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-04-01 to 2024-04-01.)

Article	Citations
Standard atomic weights of the elements 2021 (IUPAC Technical Report)	57
Methods to evaluate the scavenging activity of antioxidants toward reactive oxygen and nitrogen species (IUPAC Technical Report)	55
Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019)	55
3D printing in analytical chemistry: current state and future	51
Organocatalysis emerging as a technology	45
Global occurrence, chemical properties, and ecological impacts of e-wastes (IUPAC Technical Report)	41
Henry’s law constants (IUPAC Recommendations 2021)	37
Redox-conducting polymers based on metal-salen complexes for energy storage applications	32
Corrole photochemistry	26
Good reporting practice for thermophysical and thermochemical property measurements (IUPAC Technical Report)	24
Metrological and quality concepts in analytical chemistry (IUPAC Recommendations 2021)	22
Some aspects of the formation and structural features of low nuclearity heterometallic carboxylates	20
Analysis of the possibility and molecular mechanism of carbon dioxide consumption in the Diels-Alder processes	19
Liquid gating technology	17
Glossary of terms used in physical organic chemistry (IUPAC Recommendations 2021)	17
Catalytic hydrogenation with parahydrogen: a bridge from homogeneous to heterogeneous catalysis	16
Interlaboratory comparison of humic substances compositional space as measured by Fourier transform ion cyclotron resonance mass spectrometry (IUPAC Technical Report)	15
Synthesis and comparative study on the antibacterial activity organotin(IV) 3-hydroxybenzoate compounds	15
A retrospective on MXene-based composites for solar fuel production	14
Ni–Mo sulfide nanosized catalysts from water-soluble precursors for hydrogenation of aromatics under water gas shift conditions	14
Novel selective anticancer agents based on Sn and Au complexes. Mini-review	14
Seabed mining and blue growth: exploring the potential of marine mineral deposits as a sustainable source of rare earth elements (MaREEs) (IUPAC Technical Report)	14
Recent achievements in copper catalysis for C–N bond formation	13
Glossary of methods and terms used in analytical spectroscopy (IUPAC Recommendations 2019)	13
Azidophenylselenylation of glycals towards 2-azido-2-deoxy-selenoglycosides and their application in oligosaccharide synthesis	13

Transition metal catalyzed site-selective cysteine diversification of proteins	13
Ontologies4Chem: the landscape of ontologies in chemistry	13
A unified pH scale for all solvents: part I – intention and reasoning (IUPAC Technical Report)	12
Organic electrochromic molecules: synthesis, properties, applications and impact	12
Interpretation and use of standard atomic weights (IUPAC Technical Report)	11
Pesticide soil microbial toxicity: setting the scene for a new pesticide risk assessment for soil microorganisms (IUPAC Technical Report)	11
Minimum requirements for publishing hydrogen, carbon, nitrogen, oxygen and sulfur stable-isotope delta results (IUPAC Technical Report)	11
Fragment-based approach to novel bioactive purine derivatives	11
Methods for the SI-traceable value assignment of the purity of organic compounds (IUPAC Technical Report)	10
Antioxidant metal oxide nanozymes: role in cellular redox homeostasis and therapeutics	10
Synthetic approaches to 2,5-bis(hydroxymethyl)furan (BHMF): a stable bio-based diol	10
Competitive ways for three-component cyclization of polyfluoroalkyl-3-oxo esters, methyl ketones and amino alcohols	10
Mechanistic studies on the formation of 5-hydroxymethylfurfural from the sugars fructose and glucose	10
Structure, electronic and optical properties of chalcopyrite-type nano-clusters XFeY₂ (X=Cu, Ag, Au; Y=S, Se, Te): a density functional theory study	10
Aggregation-induced emission (AIE): emerging technology based on aggregate science	9
Terminology for chain polymerization (IUPAC Recommendations 2021)	9
IUPAC/CITAC Guide: Evaluation of risks of false decisions in conformity assessment of a multicomponent material or object due to measurement uncertainty (IUPAC Technical Report)	9
Interactions between adsorbents and adsorbates in aqueous solutions	9
Maximizing the external radiative efficiency of hybrid perovskite solar cells	9
Electrochemical flow systems enable renewable energy industrial chain of CO₂ reduction	8
Removal of chromium ions by functional polymers in conjunction with ultrafiltration membranes	8
Natural clay nanotube supported Mo and W catalysts for exhaustive oxidative desulfurization of model fuels	8
Drawing inspiration from nature to develop anti-fouling coatings: the development of biomimetic polymer surfaces and their effect on bacterial fouling	8
Disinfecting activity of some diphenyltin(IV) benzoate derivative compounds	7
Machine learning, artificial intelligence, and chemistry: How smart algorithms are reshaping simulation and the laboratory	7
IUPAC specification for the FAIR management of spectroscopic data in chemistry (IUPAC FAIRSpec) – guiding principles	7
Synthetic models of hydrogenases based on framework structures containing coordinating P, N-atoms as hydrogen energy electrocatalysts – from molecules to materials	7
Using computational chemistry to explore experimental solvent parameters – solvent basicity, acidity and polarity/polarizability	7
Reaction of 1,3-dimethylimidazolium dimethylphosphate with elemental sulfur	7
To separate or not to separate: what is necessary and enough for a green and sustainable extraction of bioactive compounds from Brazilian citrus waste	7
Rational design of nanocatalysts for ambient ammonia electrosynthesis	7
Structure, processing and performance of ultra-high molecular weight polyethylene (IUPAC Technical Report). Part 1: characterizing molecular weight	7
Ionic liquids: green solvents and reactive compounds? Reaction of tri-n-butylmethylphosphonium dimethylphosphate with elemental sulfur	6
Bis-γ-carbolines as new potential multitarget agents for Alzheimer’s disease	6
Reference materials for phase equilibrium studies. 2. Solid–liquid equilibria (IUPAC Technical Report)	6
Surface chemistry of structural materials subjected to corrosion	6
Radicals in prebiotic chemistry	6
Analytical chemistry of engineered nanomaterials: Part 1. Scope, regulation, legislation, and metrology (IUPAC Technical Report)	6
Formation of ruthenium nanoparticles inside aluminosilicate nanotubes and their catalytic activity in aromatics hydrogenation: the impact of complexing agents and reduction procedure	6
High purity substances – prototypes of elements of Periodic Table	6
Unusual behavior of bimetallic nanoparticles in catalytic processes of hydrogenation and selective oxidation	5
An overview of young chemists’ expectations towards the sustainable development of the chemical sector. Opinions that matter	5
Participation of women in science in the developed and developing worlds: inverted U of feminization of the scientific workforce, gender equity and retention	5
Data format standards in analytical chemistry	5
On the discovery of new elements (IUPAC/IUPAP Report)	5
Glossary of methods and terms used in surface chemical analysis (IUPAC Recommendations 2020)	5
The ghost nets phenomena from the chemical perspective	5
Effect of MnO_x modification and template type on the catalytic performance of ceria-zirconia in CO and soot oxidation	5
HOME-Chemistry: hydrazone as organo-metallic equivalent	4
Definition of the pnictogen bond (IUPAC Recommendations 2023)	4

Desymmetrization in geometry optimization: application to an ab initio study of copper(I) hydration	4
Variation of lead isotopic composition and atomic weight in terrestrial materials (IUPAC Technical Report)	4
Structural and electronic properties of Cu₄O₃ (paramelaconite): the role of native impurities	4
Study of the influence of autoclave sterilization on the properties of citrate functionalized iron oxide nanoparticles	4
Pd(0)-catalyzed amination in the synthesis of chiral derivatives of BINAM and their evaluation as fluorescent enantioselective detectors	4
Structure of aqueous sodium acetate solutions by X-Ray scattering and density functional theory	4
Advances in the catalyst- and reagent-controlled site-divergent intermolecular functionalization of C(sp ³)–H bonds	4
Engineering the ABIO-BIO interface of neurostimulation electrodes using polypyrrole and bioactive hydrogels	4
Separation of phenols from oils using deep eutectic solvents and ionic liquids	4
Real-time in-situ ¹H NMR of reactions in peptide solution: preaggregation of amyloid-β fragments prior to fibril formation	4
Reference materials for phase equilibrium studies. 1. Liquid–liquid equilibria (IUPAC Technical Report)	4
An apercu of the current status of women in ocean science	4
Strong emission at 1000 nm from Pr³⁺/Yb³⁺-codoped multicomponent tellurite glass	4
Launching a materials informatics initiative for industrial applications in materials science, chemistry, and engineering	3
Sustainable amidation through acceptorless dehydrogenative coupling by pincer-type catalysts: recent advances	3
Future directions of chemical theory and computation	3
Temporal probing of excitons in organic semiconductors	3
Influence of thermal treatment on the properties and intermolecular interactions of epoxidized natural rubber-salt systems	3
What defines biomimetic and bioinspired science and engineering?	3
A brief guide to polymerization terminology (IUPAC Technical Report)	3
Fluorosumanenes as building blocks for organic crystalline dielectrics	3
Thermodynamic approach for prediction of oxide materials properties at high temperatures	3
Experimental and theoretical study of the dye-sensitized solar cells using Hibiscus sabdariffa plant pigment coupled with polyaniline/graphite counter electrode	3
Recent applications of mechanochemistry in synthetic organic chemistry	3
Reaction of Amines with NO at room temperature and atmospheric pressure: is nitroxyl a reaction intermediate?	3
The chemistry of melting oxynitride phosphate glasses	3
Feasibility of multifunction calibration of H⁺-responsive glass electrodes in seawater (IUPAC Technical Report)	3
Chemical substitution in processes for inherently safer design: pros and cons	3
Structure, processing and performance of ultra-high molecular weight polyethylene (IUPAC Technical Report). Part 2: crystallinity and supra molecular structure	3
Modeling vapor-liquid-liquid-solid equilibrium for acetone-water-salt system	3
Multifunctional carriers for controlled drug delivery	3
Electrochemical hydrogen production from humid air using cation-modified graphene oxide membranes	3
Glossary and tutorial of xenobiotic metabolism terms used during small molecule drug discovery and development (IUPAC Technical Report)	3
Free energy profile of permeation of Entecavir through Hepatitis B virus capsid studied by molecular dynamics calculation	3
Extraction of various metal ions by open-chain crown ether bridged diphosphates in supercritical carbon dioxide	3
Bis-periazulene: remaining non-alternant isomer of pyrene	3
Molecular spaces and the dimension paradox	3
Data curation to improve the pattern recognition performance of B-cell epitope prediction by support vector machine	3
Future directions of catalytic chemistry	3
Polylactide-based stent coatings: biodegradable polymeric coatings capable of maintaining sustained release of the thrombolytic enzyme streptokinase	3
Comparative assessment of fluorine, sodium, and lithium distributions in snow cover in Siberia	3
A framework for integrating safety and environmental impact in the conceptual design of chemical processes	2
Women must be equal partners in science: gender-balance lessons from biology	2
Gradation control in the hydrodynamic diameters of mixed glycan-aglycan glycovesicles	2
Chemical and biochemical thermodynamics reunification (IUPAC Technical Report)	2
Particular kinetic patterns of heavy oil feedstock hydroconversion in the presence of dispersed nanosize MoS₂	2
Raman spectra of MCl-Ga₂S₃-GeS₂ (M = Na, K, Rb) glasses	2
The current landscape of author guidelines in chemistry through the lens of research data sharing	2
Soft chemistry of pure silver as unique plasmonic metal of the Periodic Table of Elements	2
Methodological aspects of snow cover sampling for chemical analysis	2
Effect of non-competitive inhibitors of aminopeptidase N on viability of human and murine tumor cells	2
Electrochemiluminescence sensors and forensic investigations: a viable technique for drug detection?	2
High-performance fiber-shaped lithium-ion batteries	2
Research frontiers of chemical detection and measurements	2
An overview of the JCAMP-DX format	2
Comparison of P- and As-core-modified porphyrins with the parental porphyrin: a computational study	2
Cd(II) and As(V) removal from the multicomponent solutions in the presence of ionic polymers using carbonaceous adsorbents obtained from herbs	2
Closed-shell and open-shell dual nature of singlet diradical compounds	2
Organic photoredox catalysts: tuning the operating mechanisms in the degradation of pollutants	2
Vocabulary of radioanalytical methods (IUPAC Recommendations 2020)	2
Maximizing student learning through the use of demonstrations	2
Terminology of polymers in advanced lithography (IUPAC Recommendations 2020)	2
Exploring the pH-dependent kinetics, thermodynamics and photochemistry of a flavylium-based pseudorotaxane	2
The beginnings of chemistry: from ancient times until 1661	2
A green sorptive extraction method (HiSorb-TD-GC-MS) for determining the extra virgin olive oil (EVOO) aroma profile	2
The virtual conference on chemistry and its applications, VCCA-2020, 1–31 August 2020	2
Experimental determination of activation rate constant and equilibrium constant for bromo substituted succinimide initiators for an atom transfer radical polymerization process	2
State-of-the-art progress in tracking plasmon-mediated photoredox catalysis	2
IUGS–IUPAC recommendations and status reports on the half-lives of ⁸⁷Rb, ¹⁴⁶Sm, ¹⁴⁷Sm, ²³⁴U, ²³⁵U, and ²³⁸U (IUPAC Technical Report)	2
Multidimensional graphene nanostructures – synthesis and applications	2
Towards lignin valorization: lignin as a UV-protective bio-additive for polymer coatings	2
Structure and magnetic properties of Bi-doped calcium aluminosilicate glass microspheres	2
Well-defined polyindole–Au NPs nanobrush as a platform for electrochemical oxidation of ethanol	2
Skin, soap, and spaghetti: investigations of co-existing solid and liquid phases in organic materials using solid-state NMR with dynamics-based spectral editing	2
Evaluation of sulfide catalysts performance in hydrotreating of oil fractions using comprehensive gas chromatography time-of-flight mass spectrometry	2
Production and characterization of a bioflocculant produced by Proteus mirabilis AB 932526.1 and its application in wastewater treatment and dye removal	2