Powder Technology

Article	Citations
Graphical abstract TOC	168
Factors determining the flowability and spreading quality of gas-atomized Ti-48Al-2Cr-2Nb powders in powder bed fusion additive manufacturing	155
Graphical abstract TOC	141
Sand-ejecting fire extinguisher parameter sensitivity analysis based on experiments and CFD-DEM coupling simulations	117
Influence of selected CO2 absorption promoters on the characteristics of calcium carbonate particles produced by carbonation of the post-distillation liquid from the Solvay process	107
Investigations of the effect of unburnt pulverized coal on the deposit formation mechanism in a rotary kiln for fluxed pellet production	104
Behaviors of a settling microswimmer in a narrow vertical channel	97
Surface to bulk synergistic restructuring of ultrahigh nickel-rich LiNi0.96Co0.02Mn0.02O2 cathode for high-performance sulfide-based all-solid-state batteries	96
Computational fluid dynamics and experimental investigation of inlet flow rate effects on separation performance of desanding hydrocyclone	96
Effect of high energy ball milling and low temperature densification of plate-like alumina powder	96
Simulation of particle fouling characteristics with improved modeling on two different tubes	91
Strength and microstructural evolution of alkali-activated slag-based cemented paste backfill: Coupled effects of activator composition and temperature	85
Stress shielding effect in pressure-assisted binder jetting	81
A review study on wastewater decontamination using nanotechnology: Performance, mechanism and environmental impacts	79
HPC challenges and opportunities of industrial-scale reactive fluidized bed simulation using meshes of several billion cells on the route of Exascale	75
Simulation and optimization of crushing chamber of gyratory crusher based on the DEM and GA	75
Particle-scale study of gas-solid flows in a bubbling fluidised bed: Effect of drag force and collision models	73
3D shape analysis of lunar regolith simulants	71
Semi-resolved CFD-DEM coupling model for submerged granular collapse	71
Improving biomass mixture separation efficiency in multiple inclined channels of gas–solid fluidized bed: CFD-DEM simulation and orthogonal experiment	71
From experimental data to predictions: Artificial intelligence supported new mathematical approaches for estimating thermal conductivity, viscosity and zeta potential in Fe3O4-water magnetic nanofluid	70
Attrition characteristics of limestone in gas-solid fluidized beds	68
Modelling of powder hydrodynamics in a screw reactor	67
Electrostatic elimination of charged particles by DC-type bipolar electrostatic eliminator	66
Effect of back pressure on the separation performance of a hydrocyclone	64

The molecular dynamics simulation of lignite combustion process in O2/CO2 atmosphere with ReaxFF force field	64
Impact of co-processed excipient particles solidity and circularity on critical quality attributes of orodispersible minitablets	61
Controlled nucleation of crystallization process as an efficient tool to tune the properties of corticosteroid API	60
Design optimization of hemispherical protrusion for mitigating elbow erosion via CFD-DPM	59
Mechanical and corrosion performance of Mg alloy via 3DP by full liquid phase sintering	58
Particulate flow and erosion modeling of a Pelton turbine injector using CFD-DEM simulations	58
Air curtain dust-collecting technology: Investigation of factors affecting dust control performance of air curtains in the developed transshipment system for soybean clearance based on numerical simul	57
Online size distribution measurement of dense iron green pellets using an efficient and multiscale nested U-net method	57
Investigation of optimal design and separation performance of the hydrocyclone with a vorticose involute-line diversion feeding body	56
Three-dimensional simulation of impinging jet atomization of soft mist inhalers using the hybrid VOF-DPM model	56
Roles of packing density and slurry film thickness in synergistic effects of metakaolin and silica fume	56
A coupled CFD–DEM model for tumbling mill dynamics—Effect of lifter profile	55
Vibratory mixing of pharmaceutical powders on a single-tablet-scale	55
Efficient DEM modeling of solid flavor particle mixing in a rotary drum	54
A numerical modeling framework for predicting the effects of operational parameters on particle size distribution in the gas atomization process for Nickel-Silicon alloys	54
Generation of 3D realistic geological particles using conditional generative adversarial network aided spherical harmonic analysis	53
Identification of gas-solid flow regimes using convolutional neural network techniques	53
Detachment of inclined spheroidal particles from flat substrates	53
Modelling and analysis on the segregation of copper concentrate particles in the feeding system of flash smelting process	52
Modeling and analysis of particle triboelectrification in pneumatic conveying	51
Dissipation behaviors in submerged beam-vibrated granular systems	50
Exploration of improved, roller-based spreading strategies for cohesive powders in additive manufacturing via coupled DEM-FEM simulations	50
A new model for predicting drag coefficient and settling velocity of irregularly shaped plant seeds	50
Study of local powder mixing in a screw reactor: Characterisation of the active layer renewal	50
Discrete magnification lens model: A new hybrid multi-scale modelling method for fluid-particle systems	50
Combining 10 meta-heuristic algorithms, CFD, DOE, MGGP and PROMETHEE II for optimizing Stairmand cyclone separator	50
Analyze of pipeline transport characteristics and optimization method of structural parameters in slurry shield circulation system with spiral structure	50
Multi-objective optimization of hydrocyclones using meta-heuristic algorithms and preference-informed decision-making	50
Modeling and analysis of hygroscopicity of energetic materials under various temperature and relative humidity conditions: A case study on ammonium nitrate	50
Euler-Lagrange simulation of dense gas-solid flow with local grid refinement	49
Further analysis of the near-plug gas flow conditions in micro gas-solid fluidized beds	49
Editorial Board	49
Graphical abstract TOC	48
Cyclic reduction of combusted iron powder: A study on the material properties and conversion reaction in the iron fuel cycle	48
Microencapsulated propolis powder: A promising ingredient of chewing gum	48
Photothermal evaporation characteristics of magnetic rGO/Fe2O3 nanofluid droplets	48
Mechanical properties are affected by coalescence mechanisms during sintering of metal powders: Case study of Al-Cu nanoparticles by molecular dynamics simulation	47
Experimental studies and numerical simulation of cold spray technique to investigate the effect of operating parameters on the thickness of Fe/TiO2 self-cleaning film	47
Strategic integration of MoO2 onto Mn0.5Cd0.5S/Cu2O p-n junction: Rational design with efficient charge transfer for boosting photocatalytic hydrogen production	46
Use of titania powders in the laser sintering process: Link between process conditions and product mechanical properties	46
Effects of operating parameters on the performance of moving bed filter	46
Improvements in dielectric, electrical and magnetic contributions in Ca0.5Co0.5CrxFe2-xO4 spinel ferrites by the substitution of Cr3+ ions	46
An investigation of the effect of powder flowability on the powder spreading in additive manufacturing	46
Predicting cold gas-solid flow in a pilot-scale dual-circulating fluidized bed: Validation of computational particle fluid dynamics model	45
Study on the effect of grain morphology on shear strength in granular materials via GPU based discrete element method simulations	44
Experimental study of multiscale dynamic characterization of the gas-solid phase in a disturbing rotary centrifugal air classifier using pressure signal testing and analysis methods	44
Resolved CFD-DEM simulation of proppant aggregating and bridging mechanisms in a narrowing fracture	44
Effect of clay crystal structure on froth rheology in flotation	44
Fractional-order modelling and dynamic analysis on a typical beam structure incorporated with a semi-active particle damping equipment	44
Experimental study of particle collision and rebound with moving walls	43

A two-fluid model for powder fluidisation in turbulent channel flows	43
Numerical study on particle deposition characteristics of turbine blade with cooling film	43
Gas-particle flow of pneumatic conveying in vertical pipes simulated using four-way coupled second-order moment method	42
A novel CFD-DEM coarse-graining method based on the Voronoi tessellation	42
Flotation of rhodochrosite fines induced by octyl hydroxamic acid as hydrophobic agglomerates	42
Micro-explosion of a two-component droplet: How the initial temperature of the water core affects the breakup conditions and outcomes	41
The influence mechanism of water-liquid CO2 treatment on the hydrophobicity of vitrinite and inertinite	41
Analysis and prediction of nucleation mechanisms in a bi-component powder bed with wettability differentials	41
Agglomeration of fine hydrophobic particles: 1D and 2D characterization by dynamic image analysis of in-line probe data	41
Influence of layer thickness and substrate bed on the void fraction of powder layers for laser powder bed fusion	40
Analysis of the breakage characteristics of rice particle beds under confined compression tests	40
Analysis of soil and soot deposits by X-ray computed microtomography	40
Dry scrubbing of gaseous HCl and SO2 with hydrated lime in entrained mixing reactor	40
Model construction method of discharge rate of eccentric silo	40
Effect of eccentricity on the particle flow characteristics in a double-orifice silo	40
Rheology of a dense granular bed penetrated by a rotating impeller	40
Conductive and radiative heat transfer mechanisms inform Nusselt number dependence on solid volume fraction for granular flows	40
Food vs packaging: Dynamics of oil migration from particle systems into fibrous material	40
Effects of particle size and flow properties on the performance of ceramic-coated separators in Lithium-ion batteries	40
Mechanism of inter-tablet coating variability: Investigation about the motion behavior of ellipsoidal tablets in a pan coater	39
A particle deposition model considering particle size distribution based on the Eulerian approach	39
Packing density of ternary cementitious particles based on wet packing method	39
A CFD-DEM investigation of powder transport and aerosolization in ELLIPTA® dry powder inhaler	39
Mixing performance of cohesive particles in a double barrel with differential velocity based on DEM	39
Including stochastics in metamodel-based DEM model calibration	39
Tailoring metal powders by dry nanoparticle coating for powder bed fusion applications	39
Particle image velocimetry for velocity measurement of muzzle flow: Detailed experimental study	39
Numerical simulation of drag on local particle cluster within a high void fraction environment in supercritical water	39
Deep neural network for generalizing and forecasting on-demand drying kinetics of droplet solutions	39
Applying conventional and intelligent approaches to model the minimum spouting velocity of vegetable biomasses in conical spouted beds	39
Influence of topography on the impact mechanism of dry granular flow: A DEM study	38
Contents continued	38
The role of powder morphology in particle movement behavior in laser powder bed fusion with an emphasis on fluid drag	38
A mesh-scale Monte Carlo method for modeling triboelectric charging of chemically identical particles	38
Removing Pb2+ and As(V) from polluted water by highly reusable Fe-Mg metal-organic complex adsorbent	38
Numerical investigations of translocation characteristics of non-spherical silica nanoparticles across pulmonary surfactant monolayer under different respiratory states using coarse-grained molecular	38
Graphical abstract TOC Continued	38
Dominance of cohesion of EG-water molecules over Van der Waals force between SiO2-ZnO nanoparticles in the liquid interface	38
Sampling of particulate materials - The grouping and segregation error: Theoretical derivation of a formula for the segregation factor	38
Editorial Board	38
Experimental study on particle velocity and acceleration length in pneumatic and hydraulic conveying systems	37
Iron-based oxygen carrier particles produced from micronized size minerals or industrial wastes	37
Graphical abstract TOC	37
Graphical abstract TOC	37
Rigidly-mounted roll mill as breakage tester for characterizing fine particle breakage	37
A novel methodology for data analysis of dynamic angle of repose tests and powder flow classification	36
Ultrasonic measurement of fill volume of bulk solids in discharge vessels	36
Numerical estimation of effective thermal conductivity of reconstructed 2D structures of cement-based building materials	36
A mechanistic analysis of particle flow in a pulsatile circulating dual fluidized bed for chemical looping technology based on CDF-DEM simulation	36
Experimental study on binary solids drying in a vibro-fluidized bed	36
Graphical abstract TOC	36
Editorial Board	35
Directed energy deposition powder stream modeling using a Gaussian beam ray representation	35
Graphical abstract TOC	35
New understanding on reduction mechanism and alloying process of rich manganese slag: Phase formation and morphological evolution	35
Implementation of CHyQMOM in OpenFOAM for the simulation of non-equilibrium gas-particle flows under one-way and two-way coupling	35
Effect of heterogeneous hydrophobic coating on floating of insoluble particles	35
Stirred media mill: A novel efficient technology for improving the physicochemical properties and aroma of matcha	35
Breaking agglomerates with low-velocity gas jets in a fluidized bed	35
A microscopic study on the mixing process of binary solids in bubbling fluidized bed	35
Implicit modelling of complex particulate structures: The effect of particle packing on agglomerate strength	35
Numerical investigation of sewage sludge combustion in a fluidized bed reactor: A comparison of 2D and 3D simulations	35
Influence of the adopted rheological model of plant suspension on the predicted resistance of its flow in the pipe	35
Particle size distribution recovery from non-Gaussian intensity autocorrelation functions obtained from dynamic light scattering at ultra-low particle concentrations	35
Evolution of particle morphology of quartz sand during one-dimensional compression	35
Phase transformations during fluidized bed reduction of New Zealand titanomagnetite ironsand in hydrogen gas	34
Prediction of fluidization behaviors of rough sphere with a TFM-DEM hybrid model	34
Research on the particle circulation flow and classification performance of multi-stage cylindrical hydrocyclones	34
Fabrication of TiAl alloys turbocharger turbine wheel for engines by metal injection molding	34
Printability enhancement and mechanical property improvement via in situ synthesis of carbon nanotubes on aluminium powder	34
Graphical abstract TOC	34
Bulk densities and flowability of mono-sized, binary mixtures and particle size distributions of glass spheres	34
Graphical abstract TOC	34
Online monitoring of dry powder mixing in a bin mixer	34
Development of drag force model for predicting the flow behavior of porous media based on genetic programming	34
Mechanism of Enhanced Flowability/Spreadability in 3D Printed Ni Alloy Powder	34
Discrete element analysis of diametrical compression of annular agglomerates	34
Axial segregation of granular mixtures in laterally shaken multi-trapezium channels	33
Combination and analysis of the lateral stress ratio and wall friction measurements	33
Discharge characteristics of non-gravity-driven powder in horizontal silos	33

Particle interactions with permeable drops in shear flow	33
Growth mechanism of metal iron particles with sulfur additives in direct reduction: First-principles calculations and experiments	33
Effect of airflow velocity on flame propagation and pressure of starch dust explosion in a pneumatic conveying environment	33
The effect of arrangement in multi-cyclone filters on performance and the uniformity of fluid and particle flow distribution	33
Physical characteristics of ground switchgrass related to bulk solids flow	33
Content continued	32
Structure and mechanical properties of Fe-10Cu alloy obtained by material extrusion-based additive manufacturing method with bimodal powder	32
Graphical abstract TOC	32
A widely applicable method to stabilize nanoparticles comprising oxygen-rich functional groups	32
Hard gelatine capsules: DEM supported experimental study of particle arrangement effect on properties and vibrational transport behaviour	32
Graphical abstract TOC	32
Graphical abstract TOC	32
Falling behavior of hollow particle with uniaxial through–hole: A case study using experiments and numerical simulations	32
Preparation of multifunctional gypsum composite with compound foaming process	32
Editorial Board	32
Editorial Board	32
Erosion of sand screens: A review of erosion prediction modelling approaches	32
Impact crushing of waste concrete for coarse aggregate liberation by water jet	32
Effect of nuclei particle shape and baffle setting on the drum granulation in iron ore sintering process	31
Research on particle retention in continuous horizontal fluidized bed based on CFD-DEM method	31
Sulfur impurity removal in magnesium aluminate spinel by acid treatment	31
Comparative study on the properties of cement grout modified with PAM and PANA at elevated temperatures	31
Study of fluidized bed freeboard for effect of Geldart A particles shape using particle image velocimetry (PIV)	31
Analysis of operational window in Freeman Technology uniaxial powder tester	30
Effect of particle size on the minimum ignition energy of aluminum powders	30
Effects of the controlled temperature in the production of high-shear granulated protein-containing granules	30
Solids dispersion in high density circulating fluidized beds	30
Numerical study of nanoparticle penetration characteristics in forked tubes using tracking particle identification	30
Contents continued	30
Application of nonlinear dynamics analysis to gas-solid flow system in horizontal pneumatic conveying of plastic pellets	30
Graphical abstract TOC	30
Editorial Board	30
Gas and particle instantaneous velocity measurement in swirling particle-laden turbulent reacting flow	30
Contents continued	29
Graphical abstract TOC	29
Theoretical and experimental analyses of energy distribution between particle and contact surface under static and dynamic loads	29
Investigation the effect of filling materials on chalcopyrite flotation	29
Residence time distribution and solids mixing of sawdust in a horizontal pulsed fluidized bed	29
Novel algorithm elucidating the tablet dividing mechanism in scored tablets and its experimental verification	29
Deagglomeration of fine granular materials under low-frequency vertical harmonic vibration	29
The correlation between the pre-consolidation and Instantaneous Yield Locus (IYL) of bulk solids	29
The formation of solid bridges during agglomeration in a fluidized bed: Investigation by Raman spectroscopy and image analyses	29
A rigid-flexible coupled dynamic model of a flip-flow vibrating screen considering the effects of processed materials	29
Toward reducing uncertainty quantification costs in DEM models of particulate flow: Testing simple, sensitivity-based, forward uncertainty propagation techniques	29
Characterization of intruder particle motion in a bladed mixer	29
Graphical abstract TOC	29
Preparation and behavior of sustained-release corrosion inhibitor microcapsules by centrifugation-coating method	29
Effects of ambient temperature and powder gas ratio on jet characteristics of O2 + CO2 and CaO particles injected by a swirl-type oxygen lance nozzle	28
Study of the stochastic dynamics of particles in the coal screening based on the Markov process	28
Graphical abstract TOC	28
Powder feeding enhancement of powder propellant supply system by using gas-permeable piston	28
Computational modeling of high pressure bubbling fluidized bed hydrodynamics using ilmenite particles	28
Graphical abstract TOC	28
Engineered inhalable micro-balloon shaped drug particles for carrier-free dry powder inhalation (DPI) application	28
Comparative evaluation of electrical resistance tomography, positron emission particle tracking and high-speed imaging for analysing horizontal particle-liquid flow in a pipe	28
Experimental investigation on the performance of hybrid electrostatic-fabric precipitators with different structures	28
The importance of humidity control in powder rheometer studies	28
Numerical studies of gas-solid flow behaviors and wall wear in a swirling fluidized bed	28
Collisional dissipation rate for binary mixtures of aspherical particles	28
Numerical simulation of the optimization for the inlet structure of the furnace in the Phosphogypsum reduction process by sulfur vapor	28
Graphical abstract TOC	28
A scaled MP-PIC method for bubbling fluidized beds	28
On the settling of spherical particles in power-law fluid at moderate Reynolds number	28
A new discrete element modelling approach to simulate the behaviour of dense assemblies of true polyhedra	28
Performance of a kaolin-doped, magnetic Cu-based oxygen carrier in biomass combustion	27
A critical assessment of the Energy Minimization Multi-Scale (EMMS) model	27
Case study of spontaneous heating of metal powder – Calorimetric solution	27
Investigation of the radiative heating of cubic particles with DEM/CFD and the BO/DO approach	27
Editorial Board	27
Bayesian calibration of GPU–based DEM meso-mechanics Part I: Parallelization of RVEs	27
Preparation of seeded granules to improve mechanical properties and various drug loading for pharmaceutical application	27
A 3D LBM-DEM study of sheared particle suspensions under the influence of temperature-dependent viscosity	27
Macrokinetic mechanosynthesis model comprising multidirectional factors characterizing the effect of mechanical treatment on the combustion of activated mixtures	27
Contents continued	27
Regimes of subsonic compressible flow in gas-particle systems	27
Graphical abstract TOC	27
Scale-up of granular material flow in an agitated filter dryer	27
Influencing factors of the mixing performance of a near-nozzle continuous mixer for 3D concrete printing: An analysis based on spatial Lacey mixing index (SLMI)	27
Size distribution evolution and viscosity effect on spherical submicrometer particle generation process by pulsed laser melting in liquid	27
Effect of layer thickness on spatters oxidation of Hastelloy X alloy during powder bed fusion-laser beam processing	26
Numerical simulation on the growth of polydisperse fine SiO2 particles by water vapor condensation	26
A modified correlation to calculate the transport velocity for pressurized chemical looping combustion	26
Immersed boundary method for considering lubrication effects in the CFD-DEM simulations	26
An environmentally friendly turnkey method to determine pore volume of powdered catalysts	26
A principal stress cap model for stresses in eccentric, circular hoppers	26
Graphical abstract TOC	26
DEM-based modelling framework for spray-dried powders in ceramic tiles industry. Part III: Validation procedure	26
Graphical abstract TOC	26
Dynamic modelling of trickle bed reactor: Case study of arabinose oxidation	26
Numerical investigation of three-dimensional flow over dual particles during settling	26
Laser powder bed fusion of a tungsten-nickel-ferrum alloy via in-situ alloying: Densification, microstructure, and mechanical properties	26
Graphical abstract TOC	26
Graphical abstract TOC	26
Graphical abstract TOC	26
Isothermal kinetics of carbothermic reduction of ilmenite concentrate with the addition of sodium carbonate	26