Powder Technology

Article	Citations
Graphical abstract TOC	273
Study of local powder mixing in a screw reactor: Characterisation of the active layer renewal	270
Synthesis of tungsten-doped TiO2 nano-onions via a layered amorphous-to-crystalline phase transition prepared by reactive laser ablation in liquid with post heat treatment	188
Decoupling calibration and coarse-graining: Quest for a generalized parameter set for DEM simulation of pharmaceutical powder	184
Novel magnetic hybrid bio-mixture with two types of nano powders for the targeted drug delivery systems: Characterize, prepare, stability, ultra-sonicated and the thermal management	165
Food vs packaging: Dynamics of oil migration from particle systems into fibrous material	147
Study on microstructure, mechanical properties and chloride ion binding of sea sand reactive powder concrete by multi-mineral admixture system	136
Evaluation of a new three-phase fluidised bed flotation column for industrial experiment study	110
Gas and particle instantaneous velocity measurement in swirling particle-laden turbulent reacting flow	99
Ti6Al4V alloy fabricated by gelcasting based on low-oxygen gel system using hydride-dehydride titanium alloy powders	92
Erosion of sand screens: A review of erosion prediction modelling approaches	83
Numerical investigations of translocation characteristics of multiple silica nanoparticles across pulmonary surfactant monolayer	83
Significant reduction in collector consumption by implementing ultrafine bubbles in lead and zinc rougher flotation	81
Numerical study of nanoparticle penetration characteristics in forked tubes using tracking particle identification	79
A microscopic study on the mixing process of binary solids in bubbling fluidized bed	78
Micro-level unloading behaviors of clay aggregates: A coarse-grained molecular dynamics study	74
Simulation study on the injection performance of the gas-solid injectors for large particles	73
Chiral separation of rotating robots through obstacle arrays	69
Numerical simulation of fluidized bed: A bibliometric analysis of research progress and prospects	69
Effect of eccentricity on the particle flow characteristics in a double-orifice silo	68
Agglomeration of fine hydrophobic particles: 1D and 2D characterization by dynamic image analysis of in-line probe data	67
Study the thermal radiation effects in gas-solid flows with gray and non-gray P1 models implemented in MFiX	66
Editorial Board	65
A novel feature extraction method for recognition of coal and gangue under wetting conditions	65
Modification and experimental validation of simplified Zehner-Bauer-Schlünder model for estimating effective thermal conductivity of gas–solid metal powder beds	63

Preparation of multifunctional gypsum composite with compound foaming process	63
Accurate calculation of major forces acting on magnetic particles in a high-gradient magnetic field: A 3D finite element analysis	62
Sparse view reconstruction and morphological characterization of falling particles through radiance field and visual hull	61
Breaking agglomerates with low-velocity gas jets in a fluidized bed	61
Numerical analysis on flow field characteristics and particle deposition distributions of DPF channels with different lengths based on lattice Boltzmann method	61
An efficient and green method to separate iron from refractory iron ore by amino mineral phase transformation	61
Content continued	60
Editorial Board	60
Evaluating the impact of stirrer design on powder behaviour in capsule filling using dyed lactose as tracer	60
Editorial Board	60
Predictive modelling approach for cottonseed plug velocity applying a circuit theory analogy	59
The significance of the trapped kink in granular segregation pattern formation	58
Corrigendum to “Flow characteristics of pneumatic conveying of stiff shotcrete based on CFD-DEM method” [ Powder Technology 397 (2022) 117109]	58
Comparative evaluation of electrical resistance tomography, positron emission particle tracking and high-speed imaging for analysing horizontal particle-liquid flow in a pipe	58
Simulation of gangue bulk tamping technology in solid filling mining: A method for performance evaluation	57
Concentration prediction of coarse particle two-phase flow in vertical pipe transportation based on machine learning ensemble and numerical simulation methods	57
DEM–SPH coupling method for the interaction between irregularly shaped granular materials and fluids	57
Air classification performances of the components within the varied feed blends	57
Interface and mechanical properties of graphene/copper composite with sonication induced Au decoration of graphene	57
Implementation of CHyQMOM in OpenFOAM for the simulation of non-equilibrium gas-particle flows under one-way and two-way coupling	56
HPC challenges and opportunities of industrial-scale reactive fluidized bed simulation using meshes of several billion cells on the route of Exascale	56
A new model for predicting drag coefficient and settling velocity of irregularly shaped plant seeds	55
Experimental and numerical analysis of structural inhomogeneity of grooved compacts	55
In-situ quantification of spatiotemporally resolved particle concentration in iron powder combustion using holographic imaging	54
Effect of TiO2 percentage on the hydrogen-based direct reducibility of high-grade pellets	53
A machine learning model for quickly predicting the inner states of ironmaking blast furnaces	53
Behaviors of a settling microswimmer in a narrow vertical channel	52
Flow behaviour of zeolite powders at high process temperatures	52
Study on dust suppression performance and field application of microbial dust suppressant based on microbial bacterial powder	52
Thermal phase transformation behavior of florencite and implications on the leaching recovery of rare earth elements (REEs)	52
P/M 18Cr ODS steels produced by mechanical alloying and hot powder forging	51
Resolved CFD-DEM simulation of proppant aggregating and bridging mechanisms in a narrowing fracture	51
Effects of the controlled temperature in the production of high-shear granulated protein-containing granules	51
Pore tortuosity and permeability of particulate composites with random packing superovoidal particles	51
Hydraulic heave in granular soils under hypergravity conditions	50
Experimental studies and numerical simulation of cold spray technique to investigate the effect of operating parameters on the thickness of Fe/TiO2 self-cleaning film	50
Characterization of the solids crossflow in a bubbling fluidized bed	50
Experimental study of particle collision and rebound with moving walls	50
Dynamic modelling of trickle bed reactor: Case study of arabinose oxidation	49
Surface to bulk synergistic restructuring of ultrahigh nickel-rich LiNi0.96Co0.02Mn0.02O2 cathode for high-performance sulfide-based all-solid-state batteries	49
Mechanochemical synthesis of layered Zn-Mo compounds as slow-release Mo fertilizers	48
Particle size distribution measurements under supercooled large drop conditions with Cloud Combination Probe in CARDC icing wind tunnel	48
Deep learning predicts shear stress in inclined dense granular flow	48
A treatise on occurrence, beneficiation and plant practices of tungsten-bearing ores	47
Cementitious binders modified with halloysite nanotubes for enhanced lead immobilization	47
Mixing performance of cohesive particles in a double barrel with differential velocity based on DEM	46
Compression prediction from single pellet press to industrial production presses	46
Study of photothermal conversion characteristics of metal oxide nanoparticles-based phase change materials	46
Variations in GARS powder microstructure as a function of powder chemistry and particle size	46
Particle deposition characteristics in concave dimple heat transfer channels with different inclination angles	46

Two-stage synthesis of spherical iron powders from steel industry by product	46
Enhancing the operation stability of lithium-rich layered oxide Li1.2Ni0.2Mn0.6O2 by synergistic pinning effect and interface reconstruction for high-energy-density lithium-ion batteries	46
Kinematics characteristics of the flip-flow screen with a crankshaft-link structure and screening analysis for moist coal	45
The pore structure and permeability evolution of thickened fine grained tailings during deposition consolidation	45
Innovative low energy production of controlled sized unilamellar liposomes by means of a spinning disk reactor	45
Analysis and graphical representation of particle size distributions	45
New insights on the role of seawater in sulfide ore flotation - A review	45
Impact of tailored textural properties of activated carbons on methane storage	45
A review on the suppression mechanism of typical flame retardants on the explosion of mine dust	45
Research on improving the spreadability of viscous powder in additive manufacturing	44
Identification of gas-solid flow regimes using convolutional neural network techniques	44
Surrogate drag model of non-spherical fragments based on artificial neural networks	44
Energy-based ball milling process design and dispersion behavior of high content CNTs/Cu composites	44
An investigation of the effect of powder flowability on the powder spreading in additive manufacturing	43
Efficiency of inertial particle separators	43
Analysis of pressure fluctuations in pneumatic conveying systems via pressure sensors – A review	42
New insights into the adsorption and assembly of mixed collectors with different carbon chain lengths on the low-rank coal flotation by sum-frequency vibration spectroscopy and molecular dynamics simu	42
Numerical simulation of the optimization for the inlet structure of the furnace in the Phosphogypsum reduction process by sulfur vapor	42
Calibration of wet sand and gravel particles based on JKR contact model	42
Cooling and phase evolution of a molten blast furnace slag particle	41
A numerical modeling framework for predicting the effects of operational parameters on particle size distribution in the gas atomization process for Nickel-Silicon alloys	41
Prediction of rod-like particle mixing in rotary drums by three machine learning methods based on DEM simulation data	41
Effect of back pressure on the separation performance of a hydrocyclone	41
Packing density of ternary cementitious particles based on wet packing method	41
Influence of layer thickness and substrate bed on the void fraction of powder layers for laser powder bed fusion	41
Effects of operating parameters on the performance of moving bed filter	40
Gas fluidization of natural graphite flakes	40
An Eulerian simulation of granular flow and heat transfer processes in moving bed heat exchangers based on μ(I) theory and ETC model	40
The microstructure of lignite and the seepage movement characteristics of ionic liquid solutions using 3D X-ray CT reconstruction	40
Influence of the flocculation effect on the rheological properties of cement slurry	40
Significantly improving microbially induced carbonate precipitation (MICP) performance by the joint effect of polyaspartic acid and poly-lysine	40
Effect of nuclei particle shape and baffle setting on the drum granulation in iron ore sintering process	40
A comparative assessment of CFD based LSTM and GRU for hydrodynamic predictions of gas-solid fluidized bed	40
Impacts of powder size on amorphous-crystalline transition behaviours in gas atomized Fe-rich alloy powders	39
An AFM-based approach for quantification of guest particle deformation during mechano-fusion	39
Thermoelastoplastic contact and charge characteristics of nonrotationally symmetric lunar dust particles	39
Exploring percolation of strong network in granular assemblies: the critical roles of particle shape and loading history dependency	39
Interparticle forces and their effects in particulate systems	39
Experimental investigation of segregation in a rotating drum with non-spherical particles	39
Discharge characteristics of non-gravity-driven powder in horizontal silos	39
Powder feeding enhancement of powder propellant supply system by using gas-permeable piston	39
Vapor-mediated impact of droplet on superheated powder bed	38
Editorial Board	38
Contents continued	38
Experimental investigation of the effect of interstitial liquid on the shear characteristics of geotechnical granular materials	38
Graphical abstract TOC	38
Microencapsulation of blends of Trapiá pulp with Brazilian tropical fruits subjected to ultrasound-assisted pretreatment	38
Editorial Board	38
The history of the international fine particle institute and some thoughts on the challenges and successes of particle science and technology	38
Analysis and prospects of the development status on the dust suppressant research field in the past 20 years	37
CPFD simulation of cluster effect on mass transfer and reaction in downer with FCC particles	37
Editorial Board	37
Method to determine envelope density for roller compacted ribbons by solid displacement of glass microspheres	37
On the gravitational fall of a non-spherical particle in a quiescent fluid medium	37
The impact of simplification on the accuracy and benchmarking of powder flowability measurements	37
The effects of humidity on the adhesion of pharmaceutical excipients to steel surfaces	37
Modelling pellet size and shape evolution during the breakage stage in spheronisation	37
A phase field model for the solid-state sintering with parametric proper generalized decomposition	36
Editorial Board	36
Editorial Board	36
Applicable scope of estimation of three-dimensional particle size distribution by the Goldsmith-Cruz-Orive and improved methods	36
Granular bed filtration of a liquid aerosol	36
Synthesis of α-Al2O3 nanoparticles with uniform size distribution by stearic acid-assisted mechanochemical method	36
Quantitative correlation of ethyl cellulose-resveratrol microspheres' specific surface area with degradation, release, and stability performances over time	36
Artificial neural network-based EMMS drag model for fluidized beds	36
Mechanistic research on the suppression of liquid hydrocarbon fuels by phosphate and bicarbonate-based solid-liquid biphasic extinguishing agents	35
Assessing the rheological properties of nano-modified coral-based cementitious materials by experimental study and machine learning modeling	35
Cuprous oxide modified nanoencapsulated phase change materials fabricated by RAFT miniemulsion polymerization for thermal energy storage and photothermal conversion	35
Effect of process parameters on porous structure properties of breathable materials fabricated by selective laser melting	35
Particle attrition-breakage model for CFD-DEM simulation based on FRM and WPM: Application in blast furnace raceway	35
Effect of nozzle inclination angle on characteristics of a gas jet in a gas-solid fluidized bed	35
Effect of cone section combination form on the separation performance of a biconical hydrocyclone	35
DNS-based study of binary wet particle collisions: Coupled modeling of agglomeration and separation	35
Internal friction and flowability of clay powder depend on particle moisture, size and normal stress	35
Diffusion of methane in mesoporous silica	35
Influence of cyclic water content changes during long-term storage on the mechanical stability of wood pellets	35
Experimental study on dynamics of a free-falling finite-size sphere associated with its collision with a wall in a boundary layer	35
Experimental and numerical analysis of granular phase flow behavior in a rotary bed reactor: Velocity profile study	35
Effect of extra inlets structure on cyclone wall erosion	34
Unravelling particle morphology and flour porosity of roller-milled green lentil flour using scanning electron microscopy and synchrotron X-ray micro-computed tomography	34

Investigation on relaxation properties of maize kernels based on the multicomponent structure	34
Numerical investigation on agglomeration of reduced iron ore powders in a fluidized bed and the inhibiting effects of non-adhesive additives	34
Numerical investigation on the swirling vortical characteristics of a Stairmand cyclone separator with slotted vortex finder	34
Experimental and numerical investigation of the collapse of binary mixture of particles with different densities	34
Anisotropic particle synthesis and characterization for lithium-ion battery electrode materials via precursor precipitate growth inhibitor	34
HMB-CFD study of oxygen-enriched pulverised coal combustion in an ironmaking blast furnace	34
Characteristics of local flow structure with different particle properties in a gas-solid diameter-varying fluidized bed	34
Synergistic effects of mixing waste activated carbon and coal in co-slurrying and CO2 co-gasification	34
Design of spherical agglomerates via crystallization with a non-toxic bridging liquid: From mechanism to application	34
A four-quadrant flow regime map for two-phase liquid-solids and gas-solids fluidization systems	33
Simple synthesis of conjugated polyvinyl alcohol derivative-modified ZnFe2O4 nanoparticles with higher photocatalytic efficiency	33
Development and calibration of discrete element model for layered gravel soils in forested areas	33
LBM-DEM simulation of particle deposition and resuspension of pre-deposited dynamic membrane	33
Determination of nucleation kinetics of cobalt sulfate by measuring metastable zone width and induction time in pure and sulfuric acid solution	32
Numerical investigation of nanofluid deposition in a microchannel cooling system	32
Serial artificial neural networks characterized by Gaussian mixture for the modelling of the Consigma25 continuous manufacturing line	32
A strain energy-based elastic parameter calibration method for lattice/bonded particle modelling of solid materials	32
Elasto-plastic and adhesive contact: An improved linear model and its application	32
Spray freeze dried uniform mannitol microspheres	32
Temperature influence on the triboelectric powder charging during dry coating of polypropylene with nanosilica particles	32
Effects of vibration on granular chute flow under low-gravity conditions	32
Co-combustion and pollutant formation characteristics of fine oil shale and lignite in a 75 t/h CFB boiler	32
Comminution energy and particulate properties of cutting and hammer-milled beech, oak, and spruce wood	32
Wet fluidization characterization of potash particles in a pulsation-assisted fluidized bed	32
Prediction of gas-solid nozzle performance based on CFD and response surface methodology	31
DEM study of particle segregation in the throat region of a blast furnace	31
Optimizing liberation of phosphate ore through high voltage pulse fragmentation	31
Bubble-particle detachment in flotation: A comparative study of the tangential and vertical direction	31
Crystal orientations of 1,3,5-triamino-2,4,6-trinitrobenzene-based polymer bonded explosives during the pressing process by neutron diffraction	31
Investigation of particle transport by a turbulent flow through a 90° bend pipe with electrostatic effects	31
Compare graphite flotation and coal flotation in Reflux Flotation Cell	31
Effect of back pressure on gas-solid distribution characteristics of cyclone distributor applied in powdered coal-fired circulating fluidized bed combustion system	31
Research on enhancement of screening performance of a novel drum screen based on the Discrete Element Method simulation	31
Particle erosion behavior in viscoelastic surfactant abrasive slurry jetting	31
Effect of precipitating agents on the magnetic and structural properties of the synthesized ferrimagnetic nanoparticles by co-precipitation method	31
Preparing a binder for cemented paste backfill using low-aluminum slag and hazardous oil shale residue and the heavy metals immobilization effects	31
Process-property correlations for spherical composite Al·Ti powders prepared by emulsion-assisted milling	31
Heterogeneous chemical structures of single pulverized coal particles and their evolution during pyrolysis: Insight from micro-Raman mapping technique	31
Ex situ and in situ functionalized Yb/Fe nanoparticles obtained by scanning pulsed laser ablation in liquids: A route to obtain biofunctionalized multiplatform contrast agents for MRI and CT imaging	31
Influence of nanoparticles on rheological properties and foam properties of mixed solutions of fluorocarbon and hydrocarbon surfactants	31
Lagrangian meshfree particle method (SPH) based simulation for granular flow in a rotating drum with regularized μ(I) elastoplastic model	30
Investigation on rock breakage by high-velocity water jet impact under different stress loading conditions: Fracture characteristic, stress and damage evolution laws	30
Ultrasonic agglomeration of flowing aerosol particles: Experiments and fixed pivot-based spatial population balance modeling	30
Deciphering the role of granule deformation and fragmentation for the tableting performance of some dry granulated powders	30
Fluidization magnetization roasting of limonite ore using H2 as a reductant: Phase transformation, structure evolution, and kinetics	30
Influence of nanoparticles on the foam thermal stability of mixtures of short-chain fluorocarbon and hydrocarbon surfactants	30
Scaling CFB risers: Maintaining microstructure dynamics	30
Compaction behavior of freeze-dried and spray-dried trypsin/lactose particulate systems	30
Reinforcement effect of fly ash with different morphologies on aluminum foam prepared via powder metallurgy	30
Swelling behavior and stress analysis of hematite pellets: Predicting failure through distortion energy criteria	30
Investigation of particle shape and ambient fluid on sandpiles using a coupled micro-geomechanical model	30
Design principles for wear liners with inserts in mining chutes	30
Geometric similarity on interparticle force evaluation for scaled-up DEM particles	30
Dynamic mechanical analysis of asphalt mortar samples containing millimetre-size capsules for self-healing purposes	30
Effect of cyclic mechanical treatment on the final properties of Nb + 2Si powder mixtures prepared for SHS	30
Light extinction and scattering to determine nanoparticle formation rates during droplet jetting in aluminum dust flames	30
Effects of AP powder topology on microscale combustion properties of AP/HTPB propellant	29
Analyzing strain localization of Chang'E-5 lunar regolith through discrete element analysis	29
A study on the impact of shifted feeding of a segregating binary mixture in continuous powder mixing	29
A comprehensive study of fines migration in internally unstable natural gas hydrate reservoirs	29
Experimental simulation and a reliable calibration method of rockfill microscopic parameters by considering flexible boundary	29
Effect of interfacial layer around core-shell nanoparticles on thermal conductivity of nanofluids	29
Production and characterization of silica materials from rice husk ash by different combustion processes	29
Stepwise oxidation of refractory pyrite using persulfate for efficient leaching of gold and silver by an eco-friendly copper(II)-glycine-thiosulfate system	29
Dedusting and inhibition of methane-coal dust hybrid explosion by ultrafine water mist containing SDS surfactant	29
Creep behavior of single coal particles based on uniaxial tests	29
Vibro-fluidization of cohesive particles	29
Hydrothermal, entropy generation and exergy performances analysis in a mini-channel with combination of longitudinal and transverse vortex generators using Al2O3 nanofluids	29
Magnetic properties of soft magnetic composites fabricated from amorphous Fe73Si11B11C3Cr2 powder by hot pressing under a low pressure	29
Vapor phase nucleation and sedimentation of dispersed nanodiamonds by MPCVD	29
Modeling and simulation of impact and breakage of maize kernels based on the DEM-PBM	29
Experimental study on the influence of surfactants in compound solution on the wetting-agglomeration properties of bituminous coal dust	29
Understanding surface roughness on vertical surfaces of 316 L stainless steel in laser powder bed fusion additive manufacturing	29
Why is the thermal conductivity of Janus nanofluid larger? – From the perspective of aggregation morphology	29
Evaluation of hydrodynamic behavior of urea granules in a pseudo-2D fluidized bed using drag models and comparison with PIV technique	29
Simulations of high-pressure fluid flow in a pre-cracked rock specimen composed of densely packed bonded spheres using a 3D CFD model and simplified 2D coupled CFD-DEM approach	29
Validation of mesoscience-based structural model for simulating gas–solid flows in circulating-turbulent fluidized beds	29
ParticleSeg3D: A scalable out-of-the-box deep learning segmentation solution for individual particle characterization from micro CT images in mineral processing and recycling	28
Effects of aggregate bulking and film thicknesses on water permeability and strength of pervious concrete	28
Discharge of vibrated granular silo: A grain scale approach	28
Basic hydrodynamics of a pilot-scale liquid-solid inverse fluidized bed	28
Numerical investigation on the clogging-collapsing events in granular discharge	28
Effect of separation space on the separation performance of cylindrical hydrocyclones	28
In-line image analysis of particulate processes with deep learning: Optimizing training data generation via copy-paste augmentation	28
Monodisperse and polydisperse packings of equiaxed concave particles: Effects of angularity and roughness	28
Solids holdup of Geldart group C particles desulfurization ash in a novel loop coupled circulating fluidized bed riser reactor	28
Numerical investigation on assessing the influence of diverse-shaped hybrid nanofluids on thermal performance of triple tube heat exchanger	28
Effects of water content on the evolution of capillary stress in unsaturated granular soils: DEM simulations	28
3D shape reconstruction and generation of natural pozzolan particles	28
Microwave-assisted calcination of spodumene for efficient, low-cost and environmentally friendly extraction of lithium	28
Thermo-mechanical performance assessment of geopolymer synthesized with steel slag and glass powder at elevated temperatures	28
Reg Davies' legacy for particle technology	28
Effect of adding a liquid combustible component and wood biomass to slurry fuel on spraying characteristics	28
Investigation of magnetite particle characteristics in relation to crystallization pathways	28
Dispersion characterizations and adhesion properties of epoxy composites reinforced by carboxymethyl cellulose surface treated carbon nanotubes	28