Polymer

Article	Citations
In situ polymerised polyaniline films over multi-walled carbon nanotubes coatings for enhanced photoelectrochemical performance	205
Sn(II)2-ethylhexanoate-catalyzed polymerizations of l-lactide in solution – Solution grown crystals of cyclic Poly(l-Lactide)s	169
A structural, DFT and experimental investigation of the ring stability and ring-opening polymerization behaviour of cyclic thionylphosphazenes in the presence of Lewis acid catalysts	139
Simultaneously excellent dielectric properties and flexibility in one dimensional CCTO nanowire filled ABS/PVDF bicomponent polymer composites	109
Polymer crystallization and optical birefringence modulated by solvent evaporation in sessile droplets	102
The flexibility of periphery enhances the electrochemical reversibility of ferrocenyl-terminated polyphenylene dendrimers	92
Dielectric properties OF 40SiO2–40P2O5–20ZrO2 /sulfonated styrene-ethylene-butylene-styrene hybrid membranes for proton exchange membrane fuel cells	87
Investigating the role of polymer size on ionic conductivity in free-standing hyperbranched polyelectrolyte membranes	77
Augmentation of dye-sensitized solar cell photovoltaic conversion efficiency via incorporation of terpolymer Poly(vinyl butyral-co-vinyl alcohol-co-vinyl acetate) based gel polymer electrolytes	66
Elasticity of single flexible polymer chains in good and poor solvents	65
In situ polymerisation of stereospecific propylene nanocomposites blends. Optimising mechanical properties	63
Crystallization and multiple melting behavior of oriented thick lamellae in isotactic polypropylene	63
Exploration of the rapid growth of high-molecular-weight oligomers in the later stage of diisocyanate self-polymerization	63
Solid-state structure, phase transition, and shape-memory properties of network copolymers with hyperbranched units containing s-benzenetricarbamide cores	60
In-situ decorating diene-rubber with carbamyl maleamic handles as sacrificial units toward network reinforcement	59
Bio-based polymer blend with tunable properties developed from paramylon hexanoate and poly(butylene succinate)	55
Combined role of regioregularity and molecular weight on melt-crystallization and self-nucleation of poly(3-hexylthiophene)	55
Effect of structural isomerism on physical and gas transport properties of Tröger's Base-based polyimides	55
Facile transfer of monolayer graphene onto polyethylene via van der Waals interactions to prepare layered composite membranes	54
Relationship between microstructure changes and embrittlement during chemo-oxidative degradation of bimodal HDPE with short chain branches	54
Synthesis and covalent immobilization of redox-active metallopolymers for organic phase electrochemistry	54
Hyperbranched bio-based waterborne sizing coating for enhancing the wettability of carbon fibre and interfacial adhesion of fibre/epoxy composites	54
Influence of nanoparticles on cylinder-forming linear triblock copolymers	54
Assembly and integration of conductive polypyrrole 2D nanofilm on protein nanolayer and the multiple potential applications	53
Reprocessible nanohybrid shish-kebab superstructures of poly (lactic acid) crystallites evolving in quiescent melt: Soft epitaxy nucleation in correlation with mechanics	53

Solid electrolyte membranes based on polybenzimidazole containing graphitic carbon nitride moiety (PBICN) for high-temperature fuel cell applications	53
Enthalpy relaxation of unconstrained and constrained amorphous phase for low isotacticity polypropylene	53
An easy synthesis of small, stable and water-compatible superparamagnetic protein-specific molecularly imprinted nanoparticles	52
Graphical abstract TOC	52
Linking interfacial energies with proton conductivity in sulfonated poly (ether ether ketone) nanocomposite	51
Editorial Board	51
A facile strategy to construct biocompatible fluorescent nanoparticles for intracellular bioimaging	50
Calendar	50
Graphical abstract TOC	49
Graphical abstract TOC	49
Contents continued	48
Editorial Board	48
Trimodal polyethylene polymer design for more sustainable packaging applications	48
Manipulative pore-formation of polyimide film for tuning the dielectric property via breath figure method	48
Graphical abstract TOC	47
On elastic anisotropy of 3D printed acrylonitrile butadiene styrene structures	46
Impact of pendent naphthalenedimide content in random double-cable conjugated polymers on their microstructures and photovoltaic performance	45
Graphical abstract TOC	45
Graphical abstract TOC	44
Graphical abstract TOC	44
Formulation based predictive cure kinetics modelling of epoxy resins	43
About the crystallization of cyclic and linear poly(L-lactide)s in alcohol-initiated and Sn(II)2-ethylhexanoate-catalyzed ROPs of L-lactide conducted in solution	43
2-Hydroxyethyl and 2-hydroxypropyl derivatives of phenylenediamines as pre-accelerators for unsaturated polyester resins	42
Graphical abstract TOC	42
Unraveling the role of counter anions on optical and microwave absorption characteristics of flexible copolymers	42
Thermally stable and highly porous separator based on cellulose acetate by glycolic acid	42
Molecular dynamics simulations of several linear homopolymers: Assessment and comparison of shock properties	42
Molecular insights of DGEBA/MeTHPA three-dimensional resin network from design to heat transfer mechanism: Dynamic simulation and experimental research	42
Controllable fabrication of high-quality magnetic nanofiber membranes using variable magnetic field-assisted electrospinning technology	42
Effect of self-assembly of nucleator adsorbed at the interface by H-bonding on the crystallization and mechanical behaviors of iPP hybrids	41
Advancing circular economy: Comparative analysis of recycled and virgin carbon fiber 3D printed composites on performance and eco-efficiency	41
Nano-assembly and optical properties of difluoroboron dibenzoylmethane-polysilane	41
Polymerization of acrylonitrile in dimethyl carbonate: A kinetic and mechanistic study	41
Quantitative analysis of polar crystalline fractions in poly(vinylidene fluoride) electrospun fibers and electrosprayed films	40
Editorial Board	40
Propagation of a chemo-mechanical phase boundary in polyacrylate gels	40
Contents continued	40
Rheological and structural properties of nanofluids based on hydrolyzed polyacrylamide and aminated carbon nanotubes for enhanced oil recovery	39
Modelling relative humidity and temperature effects on CO2 gas transport in polyetherimide	38
Assessment for stretchability condition of polymers and Time-Temperature Superposition Principle; first step towards a test for recycled PET?	38
Fracture behaviors of double network elastomers with dynamic non-covalent linkages: A molecular dynamics study	38
The effect of chain rigidity and microstructure on gas separation performance of the cardo-based polyimides	38
Influence of precursor solvent and confined environment on the polymorphic transition in electrospun Poly(l-lactide) fibers	38
Contact antibacterial and biocompatible polymeric, composite with copper zeolite filler and copper oxide, nanoparticles: A step towards new raw materials for the biomedical industry	37
Self-assembly of block copolymers on surfaces exposed to space-confined solvent vapor annealing	37
Enhanced formation of stereocomplex crystallites in Poly(l-lactic acid)/Poly(d-lactic acid) blends by silk fibroin nanodisc	36
A novel hydrophobic all-biomass aerogel reinforced by dialdehyde carboxymethyl cellulose for oil/organic solvent-water separation	36
The enhanced adsorption properties of molecular imprinted polymer material prepared using nitroxide-mediated Radical Deactivation Reversible Polymerization	36
Preparation and application of high strength, high transparency, and high impact resistance polyurethane elastomers by controlled cross-linking	36
Styrene-ethylene-butylene-styrene (SEBS) melt-blown fibers for oil spill remediation and oil barrier geotextiles	36

Efficient one-pot synthesis of CO2-based functional polycarbonates combining ROCOP and ROMP	36
Effect of conversion on epoxy resin properties: Combined molecular dynamics simulation and experimental study	35
Photo-crosslinkable and ultrastable poly(1,4-butadiene) based organogel with record-high reversible elongation upon cooling and contraction upon heating	35
Trouble-free combination of ω-alkenylmethyldichlorosilane copolymerization-hydrolysis chemistry and metallocene catalyst system for highly effective and efficient direct synthesis of long-chain-branch	35
Multiscale molecular simulations of grafted materials	35
Polynaphthoylenebenzimidazoles for gas separation – Unexpected PIM relatives	35
Mold temperature- and molar mass-dependent structural formation in micro-injection molding of isotactic polypropylene	35
Temperature and strain rate sensitivity of yield strength of amorphous polymers: Characterization and modeling	35
Structural evolution of ultra-high molecular weight polyethylene gel film stretching at different temperatures with reservation of shish crystals	35
Synthesis and electrochromic properties of all donor polymers containing fused thienothiophene derivatives with high contrast and color efficiency	35
Pressurization induced crystallization of iPP containing self-assembly β-nucleating agents: Role of pressurization rate and temperature	34
Heterogeneous mesoscopic structure modulation enhancing dielectric strength of polypropylene insulation	34
RTV silicone rubbers cured by polyhedral oligomeric silsesquioxane and ladder-like polysilsesquioxane: Thermostability, long-term thermal properties, and pyrolysis mechanism	34
Revisiting maleic anhydride-grafted biopolymers for improved compatibility and toughening of PLA/PBAT blends: Effects of molecular weight and grafting ratio	34
Microstructure evolution and mechanism of PLA/PVDF hybrid dielectrics fabricated under elongational flow	34
Boric acid bridged cyclodextrins-based polymers for selective adsorption of binary dyes	34
Facile physical modification of ultrathin polyethylene by trace poly(vinyl alcohol)	34
Synthetic polyurethane nanofibrous membrane with sustained rechargeability for integrated air cleaning	33
Preparation and characterization of organosilicon RAFT-modified anionic surface sizing agents	33
Interfacial polymerization of self-standing ABC-stacking Covalent organic framework membranes for dye separation	33
Flame retardant epoxy resin toughened and strengthened by a reactive compatibilizer	33
Effect of grafting density on the adsorption of end-grafted polymer chains	32
Structural evolution and related physical properties of machine direction oriented poly(butylene succinate-co-adipate) films	32
Fluoro-polymer functionalization for enhanced interfacial adhesion and mechanical properties in polymer bonded explosives	32
Editorial: Recent advances in radical ring-opening polymerization	32
Microstructure evolution during cooling and reheating of the physical gel composed of SEBS copolymer and crystallizable paraffin	32
Decoration of conjugated polyquinoxaline dots on mesoporous TiO2 nanofibers for visible-light-driven photocatalysis	32
Advances in self-healable and 3D printable biobased elastomers	32
Tuning of structural/functional feature of carbon fibers: New insights into the stabilization of polyacrylonitrile	32
Superhydrophobic polycarbonate blend monolith with micro/nano porous structure for selective oil/water separation	32
Effect of the crosslinking degree on the microstructure and thermomechanical properties of a polymer grouting material	32
Poly(ether ketone nitrile)/Poly(vinylidene fluoride) Separators Reinforced by Li6.5La3Zr1.5Ta0.5O12 for enhanced thermal stability and safety in lithium-ion batteries	32
Self-healing and malleable waterborne polyurethane bearing aliphatic disulfide linkages with hydrophobic branching chains	31
Effect of water content on physical adhesion of polyacrylamide hydrogels	31
Effects of microstructure on the retention of proton conductivity of Nafion/SiO2 composite membranes at elevated temperatures:An in situ SAXS study	31
Microwave-functionalized natural tannic acid as an anticorrosive UV-curable coating	31
A microfluid-on-microfluid phase separation strategy fabricates high-throughout porous polyimide separator for lithium-ion batteries	31
Graphene with different groups on the interfacial properties of carbon fiber/epoxy composites	31
Enhanced mechanical and thermal properties of phenolic-type phthalonitrile nanocomposites with fumed silica nanoparticles	31
Graphical abstract TOC	31
A tough conductive hydrogel with triple physical cross-linking, pH-Responsive swelling behaviors, and excellent strain sensitivity	31
Structure and performance of silica/functionalized solution-polymerized styrene butadiene rubber/epoxidized butadiene rubber nanocomposites	31
Thermally and mechanically robust self-healing supramolecular polyurethanes featuring aliphatic amide end caps	31
Synthesis of double-shell microcapsule containing MOF as the curing agent of epoxy resin	31
The nature of the gamma dielectric relaxation in diglycidyl ether Bisphenol-A (DGEBA) based epoxies	30
Physically crosslinked PAA/Lys-BPEA hydrogel with rapid self-healing and long-term antibacterial activities	30
An emulsion swelling route to surface-wrinkled polystyrene-silica colloidal nanocomposite particles	30
Strategy for improving high-temperature properties of polyisoprene vulcanizates by addition of polymorphic TBIR	30
Deconvolution of the segmental and chain modes in amorphous polymers: Do the short-chain modes affect the bulk relaxation?	30
Polyurethane coatings from formulations with low isocyanate content using a transurethane polycondensation route	30
Synthesis and characterization of a benzoyl modified Pebax materials for gas separation applications	30
Novel donor-acceptor-donor type electrochromic polymers based on 1,3-indandione modified triphenylamine derivatives as new acceptor units	30
Effects of annealing prior to stretching on strain induced crystallization of polyethylene terephthalate	30
Curing behavior and thermal properties of phthalonitrile resins derived from benzyl alcohol	30
Continuous fabrication of flexible, high-performance PEDOT: PSS thermoelectric fiber without post-processing	30
Reprocessable, malleable and intrinsically fire-safe epoxy resin with catalyst-free mixed carboxylate/phosphonate transesterification	30
Synergetic effect of microfluidic flow and ultrasonication on chains pre-ordering in conjugated polymer solution	30
Asymmetrical formation of isomorphism in the crystalline/crystalline blend of poly(butylene succinate) and poly(butylene fumarate)	29
Preparation of biphenyl-containing polybenzoxazines with low dielectric constants and high thermal stability	29
Zwitterionic dual-network strategy for highly stretchable and transparent ionic conductor	29
Compatibilized polylactide/polyamide 11 blends containing multiwall carbon nanotubes: Morphology, rheology, electrical and mechanical properties	29
Multiphase modeling of pressure-dependent hydrogen diffusivity in fractal porous structures of acrylonitrile butadiene rubber-carbon black composites with different fillers	29
Wood flour/-poly(methyl methacrylate)/capric acid polymer composites as form-stable phase change materials for thermal energy management	29
Comparison of the melt memory effects in matched fractions segregated from Ziegler-Natta and metallocene-made isotactic polypropylene with similar total defect content	29
Porous polyimide composite films containing mesoporous hollow silica nanospheres with ultralow dielectric constant and dissipation loss	29
Multiscale characterization and design of cellulose composites based on polymers with movable cross-links	29
Designing easily accessible tridentate hafnium catalysts for ethylene/1-octene copolymerization	29
Advances and challenges of artificial cells in life: A review	28
Graphical abstract TOC	28
Graphical abstract TOC	28
Molecular dynamics simulations of active entangled polymers reptating through a passive mesh	28
Study on relaxation behavior of all-polymer PVDF-based films containing dielectric fluoroelastomer	28
Solid-state polymerization of diaminomaleonitrile: Toward a new generation of conjugated functional materials	28
Manipulation of the spacing between the donor and acceptor by gradual side-chain modification to reduce energy loss of the organic solar cells	28
Construction of stimuli-responsive and mechanically-adaptive thermoplastic elastomeric materials	28
Green synthesis of 2-hydroxypropyl-β-cyclodextrin polymers crosslinked by citric acid for highly efficient removal of methylene blue	28
Design and fabrication of thermoplastic elastomer with ionic network: A strategy for good performance and shape memory capability	28
Corrigendum to “Engineering a biopolymer for vascular embolization based on fundamental polymer principals[Polymer 309, (2024) 127437]	28
In situ FTIR analysis for the determination of imidization degree of polyimide precursors	28
Facile fabrication of durable and flexible superhydrophobic surface with polydimethylsiloxane and silica nanoparticle coating on a polyethylene terephthalate film by hot-roll lamination	28

Editorial Board	27
Vinyl-containing covalent organic frameworks co-polymerized with imidazolium ionic liquids for the efficient cycloaddition of CO2 with epoxides	27
Tri(phenylethynyl)Bismuth: A promising and low-toxic pre-catalyst for stereoselective ring-opening polymerization of rac-lactide	27
Calendar	27
End-pulled polymer translocation through a many-body flexible pore	27
Mechanical reinforcement and confinement in elastomeric corn starch/bentonite nanocomposites	27
Synthesis of water-soluble tetrafunctional urethane acrylate bearing a pentaerythritol core and its radical polymerization behaviors in an aqueous solution	27
Graphical abstract TOC	27
Graphical abstract TOC	27
Extraction of intrinsic effects of glassy domain cross-linking on the tensile properties of ABA block copolymer elastomers via photo cross-linking approach	27
Editorial Board	27
Upcycling of waste thermosets into multiple-responsive supramolecular materials via acid-catalyzed oxidation	26
Strengthened interface as flame retarding belt: Compatibilized PLLA/PP blends by reactive boehmite nanorods	26
Shape recovery behavior and mechanical performance of 4D printed Polyurethane/MWCNT nanocomposites under γ-irradiation	26
Tuning structure in 3D-printed scaffolds of polylactide by extensional stress and its influence on properties	26
Polyimide resins with superior thermal stability, dielectric properties, and solubility obtained by introducing trifluoromethyl and diphenylpyridine with different bulk pendant groups	26
Quantitative analysis of chiral transitions and its implication for non-classical crystallization in isotactic polypropylene	26
Synthesis and thermal-responsive behavior of a polysiloxane-based material by combined click chemistries	26
Polyphosphazene with excellent superhydrophobicity, electrical insulation, flame-retardancy, and mechanical durability for composite insulators	26
Graphical abstract TOC	26
Crystallinity enhancement of extruded polypropylene containing poly(vinyl alcohol) fibers prepared in situ	26
Correlating crystalline structure with charge mobility in conjugated statistical copolymers for field-effect transistors	26
Incorporating GSE4 peptide in PEG/hyaluronic acid hydrogels to promote the alveolar epithelial differentiation of mesenchymal stem cells	26
Mechanisms determining different planar orientations in PPO films crystallized by guest sorption	26
A peroxide-based conjugated triazine framework as a luminescent probe for p-nitroaniline and Fe3+ detection	26
Ether-containing polycarbonate-based solid polymer electrolytes for Dendrite-Free Lithium metal batteries	25
A comprehensive picture on chain walking olefin polymerization	25
Novel antimicrobial polysaccharide hydrogel with fertilizer slow-release function for promoting Sesamum indicum L. seeds germination	25
Structured globules with twisted arrangement of helical blocks: Computer simulation	25
Backbiting-minimized synthesis of fluorosilicone copolymers with promoter by anionic ring-opening polymerization	25
Preparation of flexible monolithic hemoadsorbent from C/W emulsions for endotoxin removal	25
Electrospinning of epoxy fibers	25
Enhanced mechanical and thermal properties of ionic liquid core/silica shell microcapsules-filled epoxy microcomposites	25
Green processing strategy to fabricate silica-filled biobased elastomers with excellent heat oil resistance	25
A new strategy for constructing polypropylene composite foams with excellent ablation resistance and flame retardancy	25
Polyurethane based thin hydrogels for sustained protein delivery	25
Adsorption-desorption effect on physical aging in PMMA-silica nanocomposites	25
Thermally remendable bismalemide-MWCNT/DA-epoxy nanocomposite via Diels-Alder bonding	25
Moisture crosslinking and properties of ethylene-vinyl acetate rubber	25
Smart upconversion nanocapsules: Harnessing photodegradation and glutathione responsiveness of polymers for controlled release of Payloads	25
Enhancing wettability and adhesive properties of PVDF-based substrates through non-thermal helium plasma surface modification	25
Effects of silica/carbon black hybrid nanoparticles on the dynamic modulus of uncrosslinked cis-1,4-polyisoprene rubber: Coarse-grained molecular dynamics	25
Modification of fabric via co-grafted with fluorine-free carbene polymer and its hydrophobicity	25
The “solvent” effect of short arms on linear and nonlinear shear rheology of entangled asymmetric star polymers	25
Single-molecule study on the force-induced melting in syndiotactic polypropylene single crystals	25
An in-depth investigation of the C2 polymer as a next-generation transdermal drug delivery platform	25
The performance of polyethersulfone nanocomposite membrane in the removal of industrial dyes	25
Highly thermostable high molecular-weight low k PIM polymers based on 5,5′,6,6′-tetrahydroxy-3,3,3′,3′-Tetramethylspirobisindane, decafluorobiphenyl, and bisphenols	25
Synthesis internal-plasticized PVC copolymer resin from industrial application view: Copolymerization of vinyl chloride with poly(ethylene glycol) monomethyl ether methacrylate via suspension polymeri	24
The bio-based phthalocyanine resins with high Tg and high char yield derived from vanillin	24
Polyimide solution with reversible sol-gel transition by construction of dynamic π-π stacking	24
Fabricating coconut palm-based rigid polyurethane foam with enhanced compressive strength using biomass waste	24
Biomimetic design of polyisoprene rubber with terminal synergistic effects leading to mechanical properties and creep resistance boost	24
Amphiphilic polymer Co-networks based on cross-linked tetra-PEG-b-PCL star block copolymers	24
Poly(vinyl alcohol)/MXene biomimetic aerogels with tunable mechanical properties and electromagnetic interference shielding performance controlled by pore structure	24
Cavitation in die drawn poly(4-methyl-1-pentene) during second-stage tensile deformation	24
Design and force sensing performance study of flexible pressure sensor based on crosslinked PVC gel	24
Surface-enhanced nucleation in immiscible polypropylene and polyethylene blends: The effect of polyethylene chain regularity	24
Crystallinity effect on electron-induced molecular structure transformations in additive-free PLA	24
Green synthesis of a novel P/N/S containing bio-based flame retardant and its applications in poly(lactic acid): rapid self-extinguish, anti-dripping, and excellent mechanical performance	24
Luminescent molecularly imprinted polymer nanocomposites for emission intensity and lifetime rapid sensing of tenuazonic acid mycotoxin	24
Innovative poly(2,6-dimethy-1,4-phenylene) oxide nanomaterials by shear spinning solution	24
Effect of process parameters on interlaminar properties of thermoplastic composite: Molecular dynamics simulation and experimental verification	24
Density functional theory studies of polypyrrole and polypyrrole derivatives; substituent effect on the optical and electronic properties	23
Highly sensitive and flexible micro-patterned PPy/PDMS strain sensors with enhanced conductivity and stretchability for wearable electronics	23
Fluorescent aggregate structure revealed in bisphenol F epoxy thermoset	23
Preparation of high elastic bimodal cells biodegradable foam	23
Preparation and molecular simulation of hyper-dispersant modified BN filled natural rubber thermally conductive composite	23
All-in-one benzophenone structure realizes the simultaneous improvement of flexibility and radiation resistance of polyurethane	23
Synergetic effect of MXene/MoS2 heterostructure and gradient multilayer for highly sensitive flexible piezoelectric sensor	23
Supertoughened poly(lactic acid) containing low content of poly(ethylene oxide) with balanced mechanical property: The role of mesophase and phase morphology	23
Weakly negative permittivity from three-dimensional printed polydimethylsiloxane/graphene films in the radio frequency band	23
Toughening and strengthening epoxy resin with flame retardant molecular structure based on tyrosine	23
The relationship between the structure of stearic acid diamide lubricants and the lubrication properties in acrylonitrile-butadiene-styrene resins	23
Silver nanoparticles prepared by solid-state redox route from HEC for conductive, long-term durable and recycling artificial soft electronics	23
A facile one-pot route to elastomeric vitrimers with tunable mechanical performance and superior creep resistance	23
Relation between the amount of glycerol, glass transition temperature, and ion content of styrene-methacrylate ionomers	23
Glass transition of random heteropolymers: A molecular dynamics simulation study in melt, in water, and in vacuum	23
Contents continued	23
Dendritic polyphenylene framework as a light-harvesting shell for highly emissive [2.2]Paracyclophane core	23
Facile construction of polypropylene foam with dense oriented cell structure and enhancing-ductility mechanism	23
Graphical abstract TOC	22
A self-healing polydimethylsiloxane elastomer with high strength and high modulus	22
Interfacial localization of CNCs in PLA/PBAT blends and its effect on rheological, thermal, and mechanical properties	22
Analysis of the aging and stabilization processes in cyclic polyolefins containing various natural or synthetic stabilizers	22
Coarse-grained molecular dynamics simulations of nano-deformation behavior of epoxy adhesives’ interface during atomic force microscopy (AFM) mechanical testing	22
Necessity of interfacial interaction on toughness improvement for iPP/mSEBS blends	22
Synthesis and characterization of a novel catalyst based on magnetic chitosan beads for oxidoreductase enzyme biomimetic immobilization	22
Preparation of silica/natural rubber masterbatch using solution compounding	22
Sizable iodine uptake of porous copolymer networks bearing Tröger's base units	22
Polypropylene assisted phase separation nylon-6 antistatic composites: MWCNTs-NH2 and CB-NH2 as hybrid conductive nanofillers	22
Construction of mechanically strong and dual network-induced elastomeric materials with self-healing functionality	22
Design and mediated hydrogen bonding strength of Poly(styrene-alt- N–(ethyl–4–hydroxyphenyl)maleimide) copolymer to enhance miscibility with hydrogen bonded acceptor homopolymers	22
Polysulfone grafted with anthraquinone-hydroanthraquinone redox as a flexible membrane electrode for aqueous batteries	22
Enhance the thermal conductivity and mechanical properties of CF/PPBESK thermoplastic composites by growth ZnO nanowires with tunable length and diameter on prepreg	22