Polimery

Article	Citations
Influence of various forms of cellulose on the mechanical properties of polymer composites modified in a constant magnetic field	35
Influence of FFF process parameters and macrostructure homogeneity on PLA impact strength	22
A new polysaccharide-based ion-exchange resin for industrial wastewater treatment	19
Effect of acidic saliva on monomer leaching and surface roughness of 3D-printed and milled denture-base materials	12
Modification of photosensitive resin with fumed silica	11
Proces wytłaczania jednoślimakowego z zastosowaniem dozownika − zwiększanie skali	7
Determination of moxifloxacin hydrochloride in AVELOX pharmacological formulations using modified potentiometer sensors	5
Effect of reaction time on the structure and optical properties of P3HT/MWCNT-OH nanocomposites	5
Hybrid polymer composites with enhanced energy absorption	5
New legal regulations on nanoforms of substances in the context of the legal certainty principle	5
4-methyl-4-[2-(naphthalene)-2-oxoethyl] morpholin-4-ium iodide as a water soluble photoinitiator	5
Rheological properties of polypropylene composites with calcium carbonate under high shear rates	4
Influence of prophylactic fluoride agents on the color changes and surface roughness of polymer and rhodium coated nickel-titanium orthodontic archwires	4
Synthesis of molecularly printed methyl methacrylate-based polymers for the detection of di(2-ethylhexyl) phthalate and dibutyl phthalate	4
The impact of reduced graphene oxide on the properties of polyamide 6	4
The improvement in properties of polyester resin-based composites using a new type of silane coupling agent	3
Wpływ selektywnego spiekania laserowego na relaksację naprężeń w PA12	3
Synthesis and characterization of a citric and lipoic acids-derived dendrimer	3
Strength of threaded connections additively produced from polymeric materials	3
The influence of steam sterilization on the deflection of 3D printing shapes	3
Mechanical properties under quasi-static loading of the core made of flax/poly(lactic acid) composite	3
Pyrazole-based photoinitiator with antibacterial activity	3
Environmentally hazard and toxic exoskeletons of marine crustaceans wastes in synthesizing N-deacetylated chitin	2
Wpływ stopnia polimeryzacji bloku estrowego na strukturę oraz właściwości blokowych terpolimerów estrowo-eterowo-amidowych	2
Morphology and selected properties of kenaf fiber/cornhusk reinforced corn starch hybrid biocomposites	2

PolyMaS: A new software to generate high molecular weight polymer macromolecules from repeating structural units	2
Homo- and copolymerization of 2-benzothiazoylacrylamide with α-methyl styrene and methyl acrylate: synthesis, characterization and reactivity	2
Influence of molecular weight on dielectric properties and piezoelectric constant of poly(vinylidene fluoride) membranes obtained by electrospinning	2
Lignosulfonamides as a new group halogen free flame retardant for PLA	2
Geometrical accuracy of injection-molded composite gears	2
Nanokompozyty na osnowie polipirolu w ochronie metali przed korozją – przegląd literatury	2
Prediction of air permeability and effective thermal conductivity of multifilament polyester yarn by finite element analysis	2
Sustainable materials in the flexible packaging industry – an overview	2
Modification of poly(vinyl chloride) by aromatic amines: application to the extraction of some metal cation	2
The course of Mg(OH)2 modified polyethylene extusion process	2
Requirements for the content of harmful substances in market products of plastics and rubber. Part IV. Toys	2
Novel multicomponent functionalized biopolymers with enhanced thermal and dielectric properties	2
Synthesis and photochemical stability of polymeric derivatives formed by the reaction of acrylamide and succinic anhydride copolymer with dyes	2
Class C fly ash as a substitute for mineral fillers in asphalt mixtures	2
Effect of heat treatment on the tensile properties of incrementally processed modified polylactide	2
Sage-modified polydimethylsiloxane applied as antibacterial wound dressing material	2
Effect of alternative carbon-based filler on rubber compounds properties	2
Progress in the development of acrylic resin-based powder coatings – an overview	2
The influence of salivary pH on the adhesion of Candida to acrylic prosthetic materials obtained using conventional and digital techniques	2
Application of cyber-physical systems for additive manufacturing of polymer products	2
Hydroxyapatite-polymer composites with tannin as a chelating agent: crystal structure and mechanical properties	2
Thermal characteristics and recycling of bolus – a polyurethane-based material used in radiotherap	1
Influence of the addition of chitin nanocrystals on the characteristics of cellulose acetate films	1
Graphene oxide-modified cellulose acetate membranes with improved Congo red removal efficiency	1
Wymagania dotyczące zawartości substancji szkodliwych w wyrobach rynkowych z tworzyw sztucznych i gumy. Cz. III. Sprzęt elektryczny i elektroniczny, baterie i akumulatory	1
The effect of funcionalized ethylene-n-octene copolymer on mechanical properties of bioPET with organic waste fillers	1
Effect of conductive carbon black on the lightning strikes resistance of carbon fiber-reinforced epoxy resin	1
Liquid heat capacity of an amorphous poly(lactic acid)	1
Various forms of rice starch as iron cation polymer sorbents	1
Nanocellulose from agricultural waste as an emerging material for nanotechnology applications – an overview	1
Surface roughness of photoacrylic resin shapes obtained using PolyJet additive technology	1
Morphology and selected properties of NR/BR/CNT nanocomposites effect of ethanol-assisted mixing	1
Effect of ethanol-assisted mixing on the selected properties and homogeneity of NR/BR blends	1
PA 10.10 and PA 6 composites with glass or basalt fibre: mechanical properties in dry and wet state	1
The use of PLA filled with fibrillar nanocellulose from wastepaper as an expansion joint material	1
Elektroprzędzone struktury ażurowe do zastosowań w inżynierii środowiska	1
Influence of storage time on the useful properties of silicone pressure-sensitive adhesives	1
Preparation and characterization of halogen-free flame retardant MCA core-shell microcapsules coated with melamine or acrylic acid resin	1
The effect of printing velocity on the temperature and viscosity of the polymer thread at the nozzle exit in 3D printers	1
Mechanical characterization of Abutilon Indicum fiber nonwoven fabric epoxy composite materials	1
Aminated PVC cross-linked with 2,2’-dichlorodiethyl ether as heavy metal absorber	1
Carbon nanotubes-based sensor for ammonia gas detection – an overview	1
Organosilicon polymer for the release of antimicrobial drugs	1
Analysis of shrinkage stresses arising during polymerization of orthodontic adhesive systems	1
Effect of batched water exposed to a constant magnetic field on the properties of concrete filled with waste fly ash, phosphogypsum and starch	1
Influence of weather conditions on the durability of acrylic-polyurethane car coatings in an industrial area	1
Chitosan/Arabic gum /ZnO bionanocomposite as a novel antibacterial agent	1
Fotoutwardzalne kompozyty poliestrowe wzmocnione włóknem szklanym i naturalnym stosowane w renowacji systemów rurowych	1
Mikroplastik w środowisku naturalnym	1
Effect of moisture on breakdown strength and glass transition temperature of bio-polyamide reinforced with glass or basalt fiber	1

Spiro-cyclotriphosphazene with three functional end groups: synthesis and structure characterization of new polycyclotriphosphazenes with Schiff-base groups	1
Wpływ dodatków uniepalniających na bazie Sb2O3 na palność PVC	1
Emulsje wodne z utlenionych wosków polietylenowych stabilizowane środkami niejonowymi	1
Polymer composites used to manufacturing Naturacustic® acoustic screens	1
Effectiveness of polyethylene glycol-coated silica on ions adsorption in industrial wastewater	1
Potato starch plasticization by natural deep eutectic solvent	1
Novel polyamide 6 nanocomposites with graphene oxide-modified silica	0
Thermal and physico-mechanical properties of biodegradable materials based on polyhydroxyalkanoates	0
Diffuse plasma surface modification of natural rubber-based composite	0
Protective paints from natural resources: composition and properties	0
Equality in the creation of carbon dioxide equivalent	0
The influence of the gap diameter on the polymer thread temperature and velocity at the exit of the 3D printer nozzle	0
Stabilization of poloxamine and poloxamer block copolymer complexes in chlorinated organic solvents – mathematical modelling	0
Hydrogels based on poly(2-hydroxyethyl methacrylate) and nettle extract	0
Synthesis and characterization of condensed Schiff bases and their iron salts with aldamine	0
Quality improvement of gear wheels obtained from polymer materials by shaving process	0
Production and characterization of polyurethane/expanded graphite composites for industrial food preservation	0
Effect of conventional and digital methods and aging on the shear bond strength of orthodontic brackets with temporary crowns based on aged PMMA	0
Composites based on conductive polymer with carbon nanotubes in DMMP gas sensors – an overview	0
New intumescent coatings for protection flammable materials interior and outside buildings	0
Wymagania dotyczące zawartości substancji szkodliwych w wyrobach rynkowych z tworzyw sztucznych i gumy. Cz. I. Opakowania, w tym materiały i wyroby z tworzyw sztucznych przeznaczone do kontaktu z żywn	0
Optical properties of polyetherketoneketone based indirect dental restorations veneered with composite	0
Vitamin E-loaded polymeric nanoparticles from biocompatible adipate-based copolymer obtained using the nanoprecipitation method	0
Thermal and mechanical properties of PLA/ENR thermoplastic vulcanizates compatibilized with tetrafunctional double-decker silsesquioxanes	0
Effect of TEOS on the rheological properties of polyvinylidene fluoride and poly(vinylidene fluoride-co-hexafluoropropylene)	0
The influence of accelerated aging on selected mechanical properties of polypropylene with organic fillers	0
HDPE/hydroxyapatite/zeolite composite – characterization and in vitro cytotoxicity	0
Effect of high shear rate on the mechanical properties of polyethylene, poly(ethylene terephthalate), polystyrene and polypropylene waste blend	0
Evaluation of surface roughness parameters of anatomical structures models of the mandible made with additive techniques from selected polymeric materials	0
Durability of chain transmission obtained using FFF technology	0
Analiza składu kopolimeru na podstawie symulacji małych układów reakcyjnych	0
Aqueous emulsions from oxidized polyethylene waxes stabilized with non-ionic agents	0
Terminology relating to nano-, micro- and macroporous polymer materials - an overview	0
Influence of synthesis conditions on molecular weight as well as mechanical and thermal properties of poly(hexamethylene 2,5-furanate)	0
Wpływ spieniania chemicznego na strukturę i wybrane właściwości PA6 wzmocnionego włóknem szklanym	0
The use of chitosan as an effective carrier of theophylline - an anti-asthmatic drug	0
The use of thermoplastic polyurethane composites to develop a model of the renal pelvicalyceal system by 3D printing	0
Antimicrobial sustainable biopolymers for biomedical plastics applications – an overview	0
Polimeryzacja aniliny w środowisku stałego pola magnetycznego	0
Wpływ długości łańcucha aminowego i modyfikacji lignosulfonianu wapnia na palność i stabilność termiczną lignosulfonamidów	0
PLA/PBAT blends for blown film extrusion	0
Influence of sisal fibre modification on the microbial stability of poly(hydroxybutyrate-co-valerate): thermal analysis	0
Utilization of textile denim sludge waste in high load-bearing structural applications	0
Influence of the preparation method on selected properties of PLA nanofibers modified with lavender oil	0
Study of cellular structures built from self-similar models and repeatable structures manufactured by FDM/FFF technology	0
Innovative polymer composites based on biomedical materials	0
Analysis of the influence of selected Slicer parameters on the mapping accuracy in the FFF method	0
Mechanical and thermal properties of rigid PVC and graphene nanocomposites obtained by melt–mixing	0
Effect of glycerol on the properties of coconut oil cake reinforced poly(lactic acid)	0
Effect of low-temperature plasma-treated bentonite on rubber compounds properties	0
Effect of HNT on mechanical and thermal properties of poly(lactic acid)/polypropylene carbonate blends	0
Influence of terephthalic and orthophthalic units on the properties of polyols and polyurethane foams	0
Analysis of the polymeric abrasive paste regeneration for abrasive flow machining	0
Synthesis and characterization of ammonium polymer for anion removal in aqueous solutions	0
EVA/zinc oxide nanocomposites for active food packaging: selected physical, and microbial properties	0
Validation procedures for assessing the properties of anti-vandal materials for applications in public transport vehicles	0
Effects of poly(vinyl alcohol) matrix on the release of substances from the fragrance composition	0
Heterogeneous polymers degradation – microplastic	0
Effect of carbon nanotubes on the structure and properties of polymer-bitumen binder	0
Thermal stability and degradation kinetics of bio-based low-density polyethylenes	0
Gamma-induced grafting of rice straw cellulose with polyvinylpyrrolidone	0
Synthesis and characterization of modified PVC waste with different diamines for Hg(II) removal	0
Smart composite nanofibers based on PLA/PEG with the addition of clove oil as thermal regulators	0
UV-curable powder transparent coatings based on oligo(meth)acrylic resins	0
The effect of natural fillers on the mechanical properties and flammability of low-density polyethylene	0
Pre-treatment effect on the structure of bacterial cellulose from Nata de Coco (Acetobacter xylinum)	0
Mechanical and thermal properties of cotton-bamboo fabric/glass fiber epoxy composites	0
The effect of natural Gongura roselle fiber on the mechanical properties of 3D printed ABS and PLA composites	0
The influence of quaternary ammonium salts on mechanical properties of light-cured resin dental composites	0
Accelerated aging studies of the selected commercial films	0
Multi-screw extruders – an overview	0
Cut-resistant functional coated aramid knitted textiles	0
The use of soluble resin for additive manufacturing of automotive industry prototypes	0
Pickering emulsion polymerization of styrene towards alfa-functionalized polystyrene latex: parameters and process conditions	0
The effect of basalt knitted fabric on the properties of green epoxy resin	0
Modyfikowany napełniacz polimerów jako efektywny adsorbent jonów Cu(II) z roztworu wodnego	0
Zwiększanie skali procesu jednoślimakowego wytłaczania tworzyw polimerowych	0
Poly(L-lactic acid)/deproteinized natural rubber blends with enhanced compatibility	0
Wymagania dotyczące zawartości substancji szkodliwych w wyrobach rynkowych z tworzyw sztucznych i gumy. Cz. II. Produkty gumowe, w szczególności materiały i wyroby z gumy przeznaczone do kontaktu z ży	0
Novel N,N’-bis(2,4-dimethoxybenzylidene)ethylenediamine PVC membrane electrode for the potentiometric iron selective sensor based on Schiff base ligand	0

A pH-responsive biopolymer-based multiple emulsion prepared in a helicoidal contactor for chemotherapeutics delivery	0
Application of sulfonate polymer for detection of cations in industrial wastewater by capillary liquid chromatography	0
Polymer and composite materials used in medicine	0
Influence of natural fillers on the thermal and mechanical properties of epoxy resin composites	0
Influence of UV on the self-adhesive properties of silicone pressure-sensitive adhesives	0
Synthesis of polymer-grafted gold nanoparticles via gamma radiation	0
Cryogenically treated goat and human hair reinforced hybrid polymer composites	0
The effect of plasticizers and chitosan concentration on the structure and properties of Gracilaria sp.-based thin films for food packaging purpose	0
Effect of kaolinite modified with Co(II), Cu(II) and Ni(II) salts on selected properties of tread rubber blend	0
Polymer composites for obtaining human anatomic structures	0
The use of modified silica to control the morphology of polyamide 11 and poly(phenylene oxide) blends	0
The influence of calcium carbonate and its modifications on the extrusion process and selected functional properties of polypropylene cast films	0
Thermal and mechanical properties of poly(L-lactic acid) nucleated with N,N’-bis(phenyl) 1,4-naphthalenedicarboxylic acid dihydrazide	0
Thermal aging resistance of natural rubber compounded with conjugated Schiff base	0
Synthesis and characterization of multifunctional polymer additives for lubricating oils based on 2-ethylhexyl acrylate and N-isopropylmethacrylamide	0
Influence of polymer flow rate, mold cavity volume and injection speed on selected properties of polypropylene molded parts	0
Influence of the pre-treatment of nanofibers obtained from mushrooms on the mechanical properties of the paper	0
Effect of UV-radiation on IR, BR, and SBR elastomers FT-IR spectra	0
Pineapple leaf fibers as a reinforcement of biocomposites - an overview	0
New boron selective sorbents for sorption – membrane hybrid system	0
Thermal properties of porous sodium polyacrylate/silica nanocomposites	0
The new functional filler TiO2-SiO2/polyhedral oligomeric hybrid silsesquioxane as a potential modifier of polyethylene	0
Crosslinked poly(hydroxybutyl acrylate-co-acrylamide) based hydrogels: synthesis, characterization, and performance evaluation in heavy metal removal	0
Wpływ obróbki powierzchni stopów aluminium na trwałość klejonych połączeń	0
Preparation and characterization of attapulgite microcapsules coated with acrylic polymer	0
Chitosan with the addition of zeolite and ZnO nanoparticles as a new antibacterial agent	0
The effect of hyaluronic acid concentration on the rheological and tribological properties of artificial synovial fluid base solutions	0
Adhesion between orthodontic bracket and dental ceramics	0
Synthesis of hydrogel nanocomposites and their application in removing dyes and impurities	0
Synthesis and applications of calcium-aluminum layered double hydroxides - an overview	0
Morphology and selected properties of cellulose acetate membranes for environmental applications	0
Mechanical properties of sandwich products obtained by 3D printing from PLA-PLA/Al2O3	0
The influence of filler and FDM printing parameters on the strength of PLA	0
Ink based on poly(3,4-ethylene dioxythiophene), poly(sulfonostyrene) and silver nanoparticles (PEDOT/PSS/SNP) blends for fabrics printing	0
Modification of bentonite nanoclay for textile application	0
Effect of shells number and machining on selected properties of 3D-printed PLA samples	0
Influence of mosaic patterns in filament-wound tubes on mechanical behaviour under axial compression loading	0
Wybrane właściwości mechaniczne modeli polimerowych wytworzonych metodą hybrydowego szybkiego prototypowania	0
Effects of carbon nanotubes and graphene on the structure and properties of natural rubber	0
Poly(vinyl chloride)-supported triazoles grafted onto calix[4]arene for chromium ions extraction	0
Enhanced aging resistance of poly(ε-caprolactone)/brewers’ spent grain composites	0
The kinetic degradation of LDPE films subjected to aggressive environments	0
Polymer composites for medical applications as artificial bones	0
Influence of mold design and injection parameters on warpage deformation of thin-walled plastic parts	0
Polymer materials to produce wrist-hand orthoses using the additive method	0
Structural, morphological and thermal properties of microcrystalline cellulose extracted from coconut husk fiber	0
Incremental processing of polymer materials using the INDUSTRY 4.0 network structure	0
Atmospheric plasma treatment of rubber and its effect on surface characteristics	0
Requirements for the content of harmful substances in market products of plastics and rubber. Part V. Vehicles and their equipment	0
Molecular docking studies on the phytoconstituents as therapeutic leads against SARS-CoV-2	0
Zinc and graphene oxide composites as new protective coatings for oil and gas pipes	0
Thermal properties and processability of modified poly(L-lactide): the role of phenylacetic acid hydrazide derivative	0
Biocompatibility of electrospun PVA-based nanocomposite with chemical vapor deposition-derived graphene monolayer	0
Synthesis of double network nanohydrogel and its performance in release of doxorubicin	0
Rubber devulcanization in the planetary extruder – processing properties and structure	0
Structure and properties of self-extinguishing rigid polyurethane foam with inorganic filler	0
Biopolymers as renewable polymeric materials for sustainable development - an overview	0
Aging behavior of three-proof polyurethane coatings under UV radiation	0
Influence of torsion on the structure of machine elements made of polymeric materials by 3D printing	0
Nanogels obtained by gamma radiation induced polymerization	0
Functionalization methods of carbon fibers – an overview	0