Mechanics of Solids

Papers
(The median citation count of Mechanics of Solids is 0. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-11-01 to 2024-11-01.)
ArticleCitations
Fractional Operator Viscoelastic Models in Dynamic Problems of Mechanics of Solids: A Review48
Exponential Stability of Laminated Beams with Interfacial Slip16
Homogenization of Porous Piezocomposites with Extreme Properties at Pore Boundaries by Effective Moduli Method15
APPLICATION OF NEURAL NETWORKS FOR MODELING SHOCK-WAVE PROCESSES IN ALUMINUM15
Multimode Model for Fatigue Damage Development14
ON THEORY OF ORIENTED TENSOR ELEMENTS OF AREA FOR A MICROPOLAR CONTINUUM IMMERSED IN AN EXTERNAL PLANE SPACE13
Reflection and Transmission of Plane Waves in Nonlocal Generalized Thermoelastic Solid with Diffusion12
Development of Discrete Contact Mechanics with Applications to Study the Frictional Interaction of Deformable Bodies11
Analysis of the Dynamics of the Formation of a Tether Group of Three Nanosatellites Taking into Account Their Motion around the Centers of Mass10
On Solutions of the Equations of Motion of a Gyrostat with a Variable Gyrostatic Moment8
Tensors with Constant Components in the Constitutive Equations of a Hemitropic Micropolar Solids8
Coupled Thermoelasticity of Hemitropic Media. Pseudotensor Formulation8
Nonlocal Memory Dependent Derivative Analysis of a Photo-Thermoelastic Semiconductor Resonator7
Dispersion of Rayleigh waves in an elastic layer imperfectly attached to a microcontinuum substrate7
Flexural Waves in an Electrically Short Hard Dielectric and Functionally Graded Piezoelectric Layer7
A Study of Negative Poisson’s Ratio of 3D Printed Auxetic Structures7
Analytical Solution of Hyperbolic Deformable Disk having Variable Density7
Classical and Multi-Level Constitutive Models for Describing the Behavior of Metals and Alloys: Problems and Prospects (as a Matter for Discussion)6
Singularities in Dynamic Systems Involving Elastic Elements and Dry Friction6
Approach to Constructing a Hydraulic Fracture Trajectory in a Rock Mass Near a Mine Working6
AUTOROTATION MODES OF DOUBLE-ROTOR DARRIEUS WIND TURBINE6
Reflection Phenomenon of Thermoelastic Wave in a Micropolar Semiconducting Porous Medium6
Piecewise-Linear Yield Loci of Angle-Ply Reinforced Medium of Different-Resisting Rigid-Plastic Materials at 2D Stress State6
Numerical Method of Discontinuous Displacements in Spatial Problems of Fracture Mechanics6
Energy Absorption and Gradient of Hybrid Honeycomb Structure with Negative Poisson’s Ratio6
GENERALIZATION OF THE ALGEBRAIC HAMILTON–CAYLEY THEORY6
Contact Problems for a Porous Composite in the Presence of Friction Forces6
IMPACT OF NONLINEAR PROPERTIES OF ELECTROSTATIC CONTROL SENSORS ON THE DYNAMICS OF A CYLINDRICAL RESONATOR OF A WAVE SOLID-STATE GYROSCOPE6
SEISMIC BARRIERS FOR PROTECTION AGAINST SURFACE AND HEADWAVES: MULTIPLE SCATTERS AND METAMATERIALS5
ANALOGY BETWEEN THE EQUATIONS OF ELASTICITY AND THE GENERAL THEORY OF RELATIVITY5
Factorization of the Main Hyperbolic Differential Operator of the Micropolar Elasticity Theory5
The Schouten Force Stresses in Continuum Mechanics Formulations5
Semi-Regular Precession of an Asymmetrical Rigid Solid Body Filled with a Liquid5
Controlling the Spatial Motion of a Rigid Body Using Biquaternions and Dual Matrices5
Torsion of Non-Uniform Cylindrical and Prismatic Rods Made of Ideally Plastic Material under Linearized Yield Criterion5
DYNAMIC CONTROL OF COMPOUND STRUCTURE WITH LINKS OF VARIABLE LENGTH5
Dispersion of Transverse Wave in Magnetoelastic Anisotropic Layered Structure Crammed with Piezoelectric and Self-Reinforced Half Space5
Experimental Studies of the Deformation, Destruction and Filtration in Rocks: A Review5
An Algebraic Algorithm of Pseudotensors Weights Eliminating and Recovering5
APPLICATION OF THE CONJUGATE GRADIENT METHOD TO SOLVING DISCRETE CONTACT PROBLEMS FOR AN ELASTIC HALF-PLANE5
WAVE PROPAGATION IN COUPLE STRESS MICROPOLAR VISCOELASTIC GENERALIZED THERMOELASTIC SOLID5
Natural Vibrations of Truncated Conical Shells Containing Fluid5
Analytical Solution of Axisymmetric Contact Problem for a Poroelastic Layer5
Dynamic Behavior of a Beam Lying on a Generalized Elastic Foundation and Subject to a Moving Load5
Novel Manipulability for Parallel Mechanisms with Prismatic-Revolute Actuators, GA-DP Trajectory Planning Application5
On Determination of the Thermomechanical Characteristics of a Functionally Graded Finite Cylinder4
Analysis of Love Waves in Pre-Stressed Layer Sandwiched between Dry Sandy Layer and Couple Stress Substrate4
Modeling of Thermoelastic-Visco-Plastic Deformation of Flexible Reinforced Plates4
Experimental Investigation of the Properties of Auxetic and Non-Auxetic Metamaterials Made of Metal During Penetration of Rigid Strikers4
PROBLEM ON TORSION OF RODS MADE OF A HARDENING MATERIAL UNDER THE ACTION OF VARIABLE EXTERNAL PRESSURE USING A LINEARIZED PLASTICITY CONDITION4
Analysis of Lamb Problem in Non-Locally Non-Uniform Semi-Infinite Saturated Foundation4
Influence of the Crystal Structure and Type of Interatomic Bond on the Elastic Properties of Monatomic and Diatomic Cubic Crystals4
MODEL FOR ANALYSIS OF THE STRESS-STRAIN STATE OF THREE-LAYER CYLINDRICAL SHELLS WITH RECTANGULAR CUTOUTS4
On the Stabilization of the Regular Precessions of Satellites by Means of Magnetic Moments4
New Fractional Order Model of Thermoporoelastic Theory for a Half Space Saturated with Fluid4
Periodic Contact Problems for a Half-Space with a Partially Fixed Boundary4
On the Main Hypotheses of the General Mathematical Theory of Plasticity and the Limits of Their Applicability4
On a Study of the Contact Problem for an Inhomogeneous Elastic Strip4
BROAD AND LOW FREQUENCY BANDGAP IN TRUSS CORE SANDWICH BEAM4
Regular Precession of a Gyrostat in Three Uniform Fields4
APPLICATION OF THE FINITE FRACTURE MECHANICS APPROACH TO ASSESS THE FAILURE OF A QUASI-BRITTLE MATERIAL WITH A CIRCULAR HOLE4
Elastic wave reflection/transmission in non-homogeneous magneto-electro-elastic nanoplates based on the modified couple stress theory4
DISPERSION AND SPATIAL LOCALIZATION OF BENDING WAVES PROPAGATING IN A TIMOSHENKO BEAM LAYING ON A NONLINEAR ELASTIC BASE4
Dynamic Axisymmetric Tension of a Thin Round Ideally Rigid-Plastic Layer4
NEW SOLUTION TO THE PROBLEM OF A CRACK IN AN ORTHOTROPIC PLATE UNDER TENSION4
DEFORMATION MECHANICS OF A SHALLOW SHELL4
SPATIAL EFFECT OF INERTNESS OF ELASTIC WAVES ON A SPHERE4
Optimal Acceleration or Braking of Massive Flywheels at the Strength Limit4
Experimental and Numerical Simulation of Mechanical Behaviour of Ultrafine Grained AA 2014 Al Alloy4
The Modeling for the Normal Contact Stiffness and Damping of Anisotropic Interface4
MATHEMATICAL MODELING OF THE AMPLITUDE OF TRANSVERSE VIBRATIONS OF HOMOGENEOUS RODS UNDER LONGITUDINAL IMPACT4
Elastoplastic Analysis of a Rotating Solid Shaft Made of Linear Hardening Material4
Subharmonic Oscillations in the Near-Circular Elliptic Sitnikov Problem4
Diffraction of Sound Waves at an Elastic Cylinder with an Inhomogeneous Coating in the Vicinity of the Boundary of an Elastic Half-Space4
The Emerging of Stress Triaxiality and Lode Angle in Both Solid and Damage Mechanics: A Review4
STRESS STATE OF AN ELASTIC PLANE WITH ONE OR MORE INCLUSIONS OF ARBITRARY SHAPE: THE CASE OF IDENTICAL SHEAR MODULI4
On Solvability of Boundary Value Problems for Elastic Micropolar Shells with Rigid Inclusions4
Model of Shear Elastic-Plastic Deformation of a Thin Adhesive Layer4
A COMPLEX APPROACH TO THE INTERPRETATION OF THE MOTION OF A SOLID WITH A FIXED POINT4
Flat Dynamics of a Homogeneous Parallelepiped with Dry Friction4
Relaxation of Residual Stresses in a Surface-Hardened Cylinder under Creep Conditions and Rigid Restrictions on Linear and Angular Deformations4
Impact of Some Perturbations on the Generalized Elliptic Hill Problem4
The Dynamics of a Three-Dimensional Tuning Functionally Graded Plate Gyroscope3
Perforation of Layered Structures by a Spherical Rigid Body3
Study on the Effect of Relaxation Time and Mode-I Crack on the Wave through the Magneto-Thermoelasticity Medium with Two Temperatures3
Nonlinear Vibration Behavior of Aero-Engine Rotor-Bearing System in Maneuvering Flight3
Hole-Drilling Method in Residual Stress Diagnostics3
NUMERICAL–ANALYTICAL METHOD FOR SEARCHING FOR THE AUTOROTATIONS OF A MECHANICAL SYSTEM WITH TWO ROTATIONAL DEGREES OF FREEDOM3
Numerical Study on Single and Multi-Layered Concrete Target Against Steel Projectile Impact3
On the Stability Loss of a Rapidly Rotating Polymetallic Disc3
Model of a Micromechanical Mode-Localized Accelerometer with an Initially Curved Microbeam as a Sensitive Element3
Bifurcation and Chaos of Functionally Graded Carbon Nanotube Reinforced Composite Cylindrical Shell with Piezoelectric Layer3
Compressible models of shaped charge jet in water3
COMPATIBILITY EQUATIONS AND STRESS FUNCTIONS IN ELASTICITY THEORY3
Method for Generating Asynchronous Self-Sustained Oscillations of a Mechanical System with Two Degrees of Freedom3
Torsional Vibration Analysis of a Core-Shell Piezoelectric Semiconductor Rod3
Heating of Thermoelastic Half-Space with Fractional Order Strain and Variable Thermal Conductivity3
Exact Solution for Dynamic Deflection of Fluid-Conveying Nanotubes Flexibly Restrained at the Ends by Means of Green’s Function Method3
Exact Solution to the Contact Problem in a Quarter-Plane of a Multilayer Medium by the Universal Simulation Method3
Time-Optimal Movement of Platform with Oscillators3
Algorithm for Solving Discrete Contact Problems for an Elastic Strip3
Study on the optimal vibration isolation design and effect of composite multilayer wave impeding block in unsaturated soil3
Analysis of Stress Concentration with a Controlled Error in Thin-Walled Structures (Transport and Launch Container)3
Studying the Properties of Metamaterials with a Negative Poisson’s Ratio when Punched by a Rigid Impactor3
On the Motion of a Point Particle on a Homogeneous Gravitating Ball with a Spherical Cavity in the Presence of Dry Friction3
Dispersion Analysis of Torsional Waves in a Corrugated Monoclinic Crystal Medium Cladded with a Void-Type Porous Layer and Viscous-Sandy Substrate3
Damage and Fatigue Fracture of Structural Elements in Various Cyclic Loading Modes3
Results of Experimental and Theoretical Studies of the Possibilities of the Resonance Method of Ice Cover Destruction3
Lyapunov Functional Method in the Stability Problem of Volterra Integro-Differential Equations with Infinite Delay3
MECHANICAL CHARACTERISTICS OF REINFORCED AND THREE-LAYER SHELLS BASED ON METAMATERIALS, TAKING INTO ACCOUNT OPERATIONAL DAMAGE3
Indentation behavior of a hard film resting on a soft substrate3
Influence of Anisotropy on the Deformation of a Polymer Composite with Shape Memory3
Research on the Lamb Problem in Semi-Infinite Space of Non-Uniform Unsaturated Soil3
Objective Tensors and Their Mappings in Classical Continuum Mechanics3
Piecewise Linear Plastic Potentials as a Tool for Calculating Plane Transient Temperature Stresses3
STRESS FUNCTIONS IN ELASTICITY THEORY3
SH-Wave-Induced Crack Propagation in a Magnetoelastic Material under Initial Stress3
ON THE CYCLIC DEFORMATION OF THE SHELL OF THE COMBUSTION CHAMBER OF A MULTIPLE-ACTION LIQUID-PROPELLANT ROCKET ENGINE3
Steady Motions of a Symmetric Isosceles Tetrahedron in a Central Force Field3
A Study of Thermo-Mechanical Interactions in the Rotating Micropolar Elastic Solid with Two Temperatures Using Memory-Dependent Derivative3
Influence of an Electrostatic Field on Saw in Prestressed Ferroelectric Heterostructures3
Reflection and Refraction Phenomenon of Waves At The Interface of Two Non-Local Couple Stress Micropolar Thermoelastic Solid Half-Spaces3
Study of the Mechanical Properties of Thin-Film Membranes Made of Oxide and Silicon Nitride3
Geomechanical Analysis of the Wellbore Wall Breakouts Formation3
Homogenization Studies of Carbon/Epoxy Composites2
Comparison Between Two Constitutive Equations Based on High Temperature Creep Test of GH31282
Analysis of dynamic behavior of vehicle shimmy system with stochastic clearance2
Distribution Analysis of Multiple Limit Cycles of Vehicle Shimmy System with Consideration of Joint Clearances2
Quaternion Methods and Regular Models of Celestial Mechanics and Space Flight Mechanics: Local Regularization of the Singularities of the Equations of the Perturbed Spatial Restricted Three-Body Probl2
ESTIMATION OF TAKING INTO ACCOUNT THE MOMENT PROPERTIES OF THE MEDIUM ON THE EXAMPLE OF A NONSTATIONARY AXISYMMETRIC PROBLEM2
Dynamic Response of a Shallow Lined Tunnel to SH Waves in a Homogeneous Half Space2
REPRESENTATION OF DISPLACEMENTS IN A SPATIAL HARMONIC PROBLEM OF THE THEORY OF ELASTICITY USING TWO SCREW VECTORS2
Optimal Traction Control in High-Speed Maneuvering under Dry Friction Conditions2
Comparative Creep Analysis of Spherical Shell Made up of Different Materials2
Research on Random Induced Vibration Response of Stone Pavement by Engineering Construction Material Vehicles2
Dynamic Response of Concrete Subjected to High Rate of Loading: a Parametric Study2
Anharmonic Waves in a Mindlin–Herrmann Rod Immersed in a Nonlinearly Elastic Medium2
Characterization of Torsional Wave in a Bonded Corrugated Dry Sandy Geomedia2
Dynamic Increase Factor of Concrete Subjected to Compression and Tension by using Split Hopkinson Pressure Bar Setup: Overview2
Development of Tensile Split Hopkinson Pressure Bar Technique for Studying the Dynamic Behaviour of Metals2
A Finite Element-Meshless Hybrid Method (FEMLHM) of Elasticity Problem and Its Applications2
NUMERICAL MODELING OF THE FATIGUE LIFE OF STRUCTURAL STEELS UNDER SINGLE-FREQUENCY AND DUAL-FREQUENCY LOADING2
Effect of Initial Stress and Inclined Load on Generalized Micropolar Thermoelastic Medium Possessing Cubic Symmetry with Three-Phase-Lag Model2
Waves Trapped by Semi-Infinite Kirchhoff Plate at Ultra-Low Frequencies2
Controlling the Planar Motions of a Rigid Body Using a Movable Mass2
On the Determination of the Mechanical Characteristics of Rod Elements Made of Functionally Graded Materials2
Estimation of the Geomechanical State of the Marginal Zone of a Coal Seam Containing a Flimsy Layer2
On Strong Ellipticity and Infinitesimal Stability in Third-Order Nonlinear Strain Gradient Elasticity2
Investigation of the Errors of Fast Trigonometric Interpolation in Solving the Problem of Stresses in a Bar2
Influence of Thermal Expansion in an Inhomogeneous Stationary Temperature Field on the Inhomogeneous Stress-Strain State of an Incompressible Elastomer Solid under Static Finite Deformations2
Numerical Investigation of the Parametric Effect on the Strength of Filament-Wound Riser under Combined Loads2
EVOLUTIONARY MODEL OF FATIGUE FRACTURE UNDER IRREGULAR LOADING2
Action of an Oblique Seismic Wave on an Underground Pipeline2
Control of the Rotation of a Solid (Spacecraft) with a Combined Optimality Criterion Based on Quaternions2
Impact of Initial Stress on Wave Propagation in Exponentially Graded Isotropic Nonlocal Generalized Thermoelastic Solid Medium2
Transition Processes in Tippe-Top Dynamics2
Short-Term Forecast of the Earth’s Pole Motion, Taking Into Account Lunar Disturbances2
STABILITY OF AN INFINITELY LONG CYLINDRICAL SHELL LOADED WITH EXTERNAL PRESSURE CREATED BY A RIGID EXTERNAL ENVIRONMENT2
Linear Transverse Oscillations of the Space Elevator Cable2
Effects of Combined Loadings on the Bearing Performance of a Typical Pile Foundation2
A New Digital Speckle Correlation Method for Studying the Dynamic Fracture Parameters of Rocks under an Impact Load2
ON THE MOTION OF AN ELASTIC INEXTENSIBLE RING2
Modified Moore–Gibson–Thompson Thermoelastic Model with Hyperbolic Two Temperatures Effect on Semiconducting Thermoelastic Solid Cylinder2
New Fractional Application on A homogenous Isotropic Thermo-Poroelastic Half-Space2
Stability Criterion for Stationary Solutions of the Equations of a Multi-Current Model of a Synchronous Gyroscope in a Gimbal. 22
Class of Auto-Oscillating Systems2
Influence of Different Factors on the Most Vulnerable Position of Steel - Aluminum Composite Target Plate under Constant Surface Density2
WAVE PROCESSES IN VISCOELASTIC TOPOGRAPHIC WAVEGUIDES2
Prediction of crack initiation angle in brittle structures containing inclined cracks2
Experimental Study of the Effect of Anisotropy on the Orientation of Breakouts in Wells2
A Study of Plane and Rayleigh Waves in a Microstructural Medium: the Role of Size Dependency and Thermal Effects2
A New Hybrid Method, Density-Shape-Element Removal (D-S-ER), for the Optimization of Continuum Structures2
Elasto-Plastic Stress Analysis in a Tube Made of Isotropic Material and Subjected to Pressure and Mechanical Load2
Dynamic Regimes of Biaxial Stretching of a Thin Ideally Rigid-Plastic Rectangular Plate2
Inhomogeneous Problem of the Theory of Elasticity in a Half-Strip. Exact Solution2
To the Static Stability of the Cross-Sectional Shape of a Pipeline, Cylindrical Shell, Carbon Nanotube2
Block-Based Synthesis of a Tracking System for a Twin-Rotor Electromechanical System with Constraints on State Variables2
Sound Diffraction on a Sphere with an Inhomogeneous Coating in a Plane Waveguide2
Modeling of Creep Deformation in an Internally Pressurized Transversely Isotropic Spherical Shell Subjected to a Thermal Gradient2
Solution for the Geometric Elastostatic Inverse Problem by Means of Not Completely Overdetermined Boundary Data2
Capillary Adhesion of Elastic Bodies under the Conditions of Partial Slip2
On a Class of Semi-Regular Gyrostat Precessions with Variable Gyrostatic Moment2
EXPERIMENTAL AND THEORETICAL RESULTS FOR STRAIN MEASUREMENT USING FIBER BRAGG GRATING SENSORS EMBEDDED INTO THE MATERIAL2
On One Mechanical Model of Self-Organization of Nanoparticles2
PROPER GENERALIZED DECOMPOSITION METHOD FOR STRESS ANALYSIS OF FUNCTIONALLY GRADED MATERIALS1
Elastic and mechanical properties of Y1 – xScxN alloying system as a function of Sc content: First principles study1
A New Approach to the Combination of Load Interaction Effects and Damage Functions in Fatigue Life Prediction Based on Ductile Dissipation Energy1
Spatially One-Dimensional Boundary Value Problems of Coupled Thermoelasticity: Generalized Functions Method1
Quaternion Methods and Regular Models of Celestial Mechanics and Space Flight Mechanics: The Use of Euler (Rodrigues–hamilton) Parameters to Describe Orbital (Trajectory) Motion. I: Review and Analysi1
Comparison of Isothermal and Adiabatic Elasticity Characteristics of the Single Crystal Nickel-Based Superalloy CMSX-4 in the Temperature Range Between Room Temperature and 1300°C1
PARAMETRIC CONTROL OF FLOAT OSCILLATIONS1
Modeling of Viscoelastic-Viscoplastic Behavior of Flexible Reinforced Plates1
CONTACT BETWEEN A SMOOTH INDENTER AND A TWO-LAYER ELASTIC HALF-SPACE WITH COMPLICATED CONDITIONS ON THE SURFACE1
The Application of the Isogeometric Method Based on Bézier Extraction for the Thermo-Plastic Analysis of Welded Steel Plate1
Critical State Models in Non-Cohesive Media Mechanics (Review)1
Theoretical Study on Interference of Shaped Charge Jet with Liquid-Filled Enclosed Structure1
Dynamics of a Non-Ideal Gyroscopic Rotor System with Translational-Rotational Coupling Effect of External and Internal Damping1
A Dynamicly Consistent Model of Normal Reactions at Points of a Mobile Platform Contact with a Surface Taking Account of the Design of Mecanum Wheels and Multicomponent Friction1
Asymptotic Study of Plate Bending for a Strongly Orthotropic Material1
Statement of the Problem of Precessions of a Solid with a Fixed Point in Three Homogeneous Force Fields. Precession-Isoconic Body Movements1
FAILURE-DELAY EFFECT UNDER INFLUENCE PULSE DYNAMIC LOADS1
Investigation of the Retarding Mechanism of Skin on Medium-Low Speed Projectiles in the Bionic Composite Target1
Delamination Propagation and Crack Growth Analysis of Composite Beams Using a Layer Wised Virtual Crack Closure Technique1
EFFECTIVE ELASTIC MODULI OF PERFORATED PLATES CONTAINING A RECTANGULAR LATTICE OF CIRCULAR HOLES1
Memory Effects on Rayleigh Waves Propagation in a Micropolar Thermoelastic Half Space1
Research on the Dynamic and Reliability of Planar Multi-Link Mechanisms with Multiple Clearances1
INFLUENCE OF TEMPERATURE AND LOAD ON THE FRICTION COEFFICIENT BETWEEN CARBON FIBERS1
Accounting for Nonlinearity of Resonator Oscillations in the Identification of Parameters of Solid-State Wave Gyroscopes of Different Types1
Peculiarities of Body Balance on Hinged Supports and Sliding Closure1
On the Dynamics of an Inhomogeneous Prestressed Electroelastic Medium under Exposure to an External Electric Field1
A Corten-Dolan model considering material strength degradation1
Contact with Intermolecular Interactions for a Viscoelastic Layer (Self-Consistent Approach): Feature Analysis of the Indenter Approach/Retract Process1
Influence of Different Factors on the Anti-Penetration Performance of Three-Layer Steel - Aluminum Composite Structure under Equal Surface Density1
HYBRID ORIENTATION SYSTEM FOR ORBITAL SPACECRAFT1
On the Contact Problem for a Wavy Cylinder and an Elastic Half-Plane1
Variant of the Relationship between the Mechanical and Adhesive Properties of Solid Materials1
Comparative Study of Free Vibration for Carbon Nanotube-Reinforced Composite Plates Based on Various Higher-Order Plate Theories1
Analytical Approximation of Functional Dependences of the Geodesic Line Parameters1
Investigations on Stress Relaxation Behavior of Structural Planes Using Shear Tests1
Stability of an Infinitely Long Cylindrical Shell under the Action of External Pressure Created by Winding Flexible Filaments1
Exemplification in Exact and Approximate Secular Equation of Surface Wave Along Distinct Interfaces with Sliding Contact1
Dynamics of a Wind Turbine with Two Moving Masses Using the Galloping Effect1
A Novel Decentralized Adaptive Control Strategy for an Open-Chain Robotic Manipulator1
Theoretical Aspects of the Application of Pochhammer-Chree Waves to the Problems of Determining the Dynamic Poisson’s Ratio1
Theory of Imperfections of Three-Dimensional Tuning Plate Gyroscope. Part I: Material Imperfections1
Axisymmetric Wave Propagation in Functionally Grade Cylinder with Isotropic and Transversely Isotropic Concentric Layers1
STEADY-STATE CREEP OF A LONG NARROW RECTANGULAR MEMBRANE INSIDE A LOW RIGID MATRIX WITH A PROPORTIONAL DEPENDENCE OF THE MAGNITUDE OF THE TRANSVERSE PRESSURE ON TIME1
Modified Theory of Plasticity for Monotonic and Cyclic Deformation Processes1
Influence of Gravity and Hall Current on a Two-Temperature Fiber-Reinforced Magneto-Visco-Thermoelastic Medium Using a Modified Green-Lindsay Model1
A Finite Element Formulation for Highly Deformable Elastoplastic Beams Accounting for Ductile Damage and Plane Stress State1
FUNDAMENTAL QUESTIONS OF THE THEORY OF COMBINED FREE TWO-MODE GYROSCOPES1
Four-Bar Linkage: Reducibility of the Configuration Space and Transfer Function1
Stress State of Unbounded Space Near a Cylindrical Cavity with a Non-Circular Cross-Section for Aging Elastic-Viscoplastic Materials1
SOLUTION OF THE PROBLEM ON THE EXPANSION OF A SPHERICAL CAVITY IN TERMS OF ESTIMATION OF THE RESISTANCE TO THE PENETRATION OF A SOLID INTO THE SOIL1
Calculation of the Stress-Strain State of a Polymer Composite in a Direct Electric Current Field1
Ice Cover Modeling in Predicting the Interaction of Ships and Offshore Structures with Ice1
Calculations of the Evolution of Planetary Orbits1
AXISYMMETRIC WAVE PROPAGATION IN TRANSVERSELY ISOTROPIC PIEZOELECTRIC FUNCTIONALLY GRADE CYLINDER1
TRAIN STARTING EQUATION1
Control Systems Depending on a Parameter: Reachable Sets and Integral Funnels1
Linear and Nonlinear Plane Longitudinal Waves in the Slepyan–Palmov Medium1
Some Solutions of the Theory of Elasticity for a Rectangle1
LIMIT CYCLES IN THE DYNAMICS OF AN ELASTICALLY MOUNTED AERODYNAMIC PENDULUM1
On the Calculation of Nonlinear Buckling of a Bar1
Numerical Calibration of Stress Intensity Factor for Transversely Isotropic Central Cracked Brazilian Disk1
3D MODELS OF CONTROLLABLE HINGED MECHANISMS WITH LINKS OF VARIABLE LENGTH FOR HUMAN EXOSKELETONS1
On a Method for Solving Boundary Value Problems of the Dynamical Theory of Elasticity in a Quarter Plane1
Control of the Dynamic Parameters of a Flat Beam Structure by Selection of Fixing1
Stability of Circulatory Systems under Viscous Friction Forces1
Effect of Inclined Load and Initial Stress on Plane Waves of Thermoelastic Rotating Medium via Three-Phase-Lag Model1
0.058977842330933