Kovove Materialy-Metallic Materials

Papers
(The median citation count of Kovove Materialy-Metallic Materials is 0. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-03-01 to 2025-03-01.)
ArticleCitations
The effect of boron nitride (h-BN) and silicon carbide (SiC) on the microstructure and wear behavior of ZA40/SiC/h-BN hybrid composites processed by hot pressing12
Effect of directionality of AZ31 magnesium alloy sheets produced by continuous variable cross-section direct extrusion on corrosion behavior9
Microstructural and mechanical behavior of unique aluminum matrix composites reinforced with pre-synthesized Al/Cu core-shell particulates3
Effect of lithium on mechanical and corrosion properties of friction stir back extruded Al-Cu-Mg alloy3
Study of thermal properties of the aluminium EN AW 2024-T3 alloy2
"Effect of plasma spraying parameters on microstructure and thickness and porosity of WC-CrC-Ni coatings deposited on titanium "2
Development of a sustainable novel aluminum alloy from scrap car wheels through a stir-squeeze casting process2
The effect of deformation temperature in metastable austenite zone on microstructure evolution, mechanical and corrosion properties of high Cr ferritic-martensitic steel1
Study on corrosion behavior of Sb-Sn high-strength weathering steel under simulated industrial atmospheric environment1
Effect of heat treatment temperature on the microstructure and hardness of AlCoCrNiFe high-entropy alloy sintered by hot oscillating pressing1
"Tribological performance of ceramic-based films under different tribo-test media and vacuum conditions "1
Microstructure and mechanical properties of fibre laser welded joints of CP780 and TRIP690 steel1
Improving the mechanical properties and corrosion resistance of Mg-2Zn-0.5Zr-1.5Dy alloy by combining hot extrusion with subsequent fluorinated coating1
"Investigation of the influence of low-frequency harmonic oscillations on deposited metal "1
Effect of boron addition on microstructure and toughness of Ti-containing weld metals1
"Investigation of microstructure evolution of Inconel 939 joint diffusion brazed using an amorphous liquated Ni-Cr-Fe-Si-B interlayer "1
Effects of ultrasonic peening on corrosion fatigue and corrosion behavior of welded AA5086-H32 aluminum alloy1
Effect of arc remelting on microstructure and pitting corrosion resistance of 441 ferritic stainless steel1
Influence of nano-Si3N4(P) hybridization on the mechanical and quasi-static compression behaviour of AA6082-Metakaolin composites0
Improvement and characterization of the surface properties of AA 5083 aluminum alloy by plasma spraying methods0
Diffusion brazing of Nicrofer 5520 (IN-617) superalloy using an amorphous Ni-Cr-Si-B interlayer: Microstructural characterization and mechanical properties0
Study of electronic and optical properties of As-doped TiO2 using first principles0
The influence of the casting method on mechanical properties of A356-Al2O3 nanocompositeEffect of boron addition on microstructure and toughness of Ti-containing weld metals0
The effect of laser pre-oxidation of stainless steel on joining to polyamide by the LAMP method0
Increasing wear resistance of components made of 50MnSi4 steel by Fe-Cr-C-Mo based hardfacing alloys0
"Influence of spark plasma sintering and conventional sintering on microstructure and mechanical properties of hypereutectic Al-Si alloy and hypereutectic Al-Si/B4C composites "0
Experimental investigation of sinterability of PVA-coated Magnesium powders via mechanical milling using Electric Field-Assisted Sintering Technique0
Experimental evaluation and FE simulation of phase transformations and tensile stresses in hot forging and controlled cooling0
Optimizing microstructure and mechanical properties of NiAl-9Mo alloy by Zr addition and suction casting process0
"Compressive properties of an Al-matrix syntactic foam filled with Al2O3 hollow sphere "0
Design and testing of a simple structural component for space applications0
High temperature deformation behaviour of as-cast Al0.4Co0.9Cr1.2Fe0.9Ni1.2(Si, Ti, C, B)0.375 complex concentrated alloy during tensile and compression tests0
Crystal structure, magnetic and thermal properties of the non-stoichiometric alloys Tb0.95Pd2.20Mn0.85 and Dy1.00Pd2.15Mn0.850
Evaluation of residual stress, surface hardness, roughness, and wear resistance of AZ31 in SMAT process using Taguchi analysis0
"Phase segregation and surface properties in liquid Ga-Tl alloys predicted by modified self-association model "0
Characterization of Al2Ti/Al3Ti-based intermetallic and Al2O3/TiO2-based oxide composite coatings fabricated on Ti6Al4V alloy0
The influence of heat treatment on mechanical, thermal, and structural properties of AISI D2 steel0
Fabrication of SiC and h-BN particle-reinforced Cu-Sn-Zn sliding alloy by powder metallurgy and characterization0
Study of mechanical and wear behaviour of AA5083 graphene reinforced composites0
Tensile properties of as-cast and aged Pb-Sn-Ca alloys for positive grids of lead-acid batteries0
"Precipitation behavior prior to hot roll in the cold-rolled Al-Mg and Al-Mg-Zr alloys "0
Effect of zinc addition on the tribological behavior of aluminum-based close cell metal foams0
A new test for evaluating crack sensitivity of materials during welding0
Effect of antimony addition on the microstructure modification and properties evolution of hypereutectic Al-Si-Zr alloy0
Influence of heat treatments on microstructure and wear behavior of AISI H13 tool steel0
The yttrium substitution impact on mechanical properties of biodegradable Mg66Zn30Ca4 alloy0
"Initiation mechanism on transverse microstructure and properties inhomogeneity of hot-rolled low-carbon steel plate "0
"Effect of tempering process on mechanical properties of high titanium microalloyed steels containing niobium "0
"Evaluating the mechanical and tribological characteristics of aluminium hybrid composites incorporating ZrO2 and graphite micro-particles "0
Effect of duty cycle on properties of Ni-P-(sol) Al2O3 nanocomposite coatings prepared by pulse-assisted sol-gel method0
Effect of thickness and build direction on the mechanical behavior and microstructure of AISI 316L stainless steel produced by Laser Beam Powder Bed Fusion0
Effects of supersonic fine particle bombardment on the microstructure and properties of an Mg-1.8Zn-0.5Zr-1.5Gd biological magnesium alloy0
Study on the microstructure and mechanical properties of annealed TC4/6061/AZ31B/6061/TC4 symmetrical clad sheets0
Kinetics simulation of TiB2 layers on the titanium alloy (Ti6Al4V) obtained by liquid boriding process0
Effect of 5.31Ti (at.%) content used as ternary in quaternary Cu-rich high-temperature shape memory alloy cast via arc melting0
Impact of RE/Ba change on RE2O3 phase and BaZrO3 nanorods at low temperature in REBCO superconducting film0
Effects of hot deformation on microstructure evolution, hardness, and intergranular corrosion of 7085 aluminum alloy sheets0
A comparison of the performance of cold work tool steels used in die-making0
Waste metals based metal-matrix ceramic-reinforced composites for friction applicationsStructural properties and cyclic oxidation behavior of Ni-Al-Y superalloys0
"The resonance between the mixing energy and the elastic strain energy as the reason for the composition modulation effect appearance during the spinodal decomposition of GaInPAs solid solutions "0
Microstructure and properties of steady magnetic field-assisted laser welded joints of CP780-TRIP590 steels0
Metallurgical characterization of natural aging effects on pre-deformed Al 7075/T651 alloy during retrogression and re-aging heat treatment0
Appropriate cumulative fatigue damage models for fatigue life estimation applied to high-strength steels0
Effect of  phase precipitation on grain growth and mechanical properties of Inconel 718 prepared by selective laser melting0
Corrosion behavior of CoCrNiAl high entropy alloy and other typical metals in simulated acid rain solution0
Comparison of the microstructure of ERNiCrFe-7A deposited metal by cold wire GTAW and hot wire GTAW0
Comparative study on the effect of (Cr, Mo, V)-alloying on transformation and mechanical behavior of 0.2 wt.% C TRIP-assisted steel0
"Hot deformation behavior, processing map, and microstructural evolution of Mg-Zn- Zr magnesium alloy "0
Austempering Ce-La inoculated solution strengthened ferritic ductile cast irons0
Evaluation of welding parameters effects in friction stir welding of AZ31B Mg alloy0
Microhardness and corrosion behavior of thermally treated Fe38Ni36B18Si8 metallic glass0
Structural properties and cyclic oxidation behavior of Ni-Al-Y superalloys0
"Al24.2Si3.25Cu24.2Ni24.2Ti24.2 high-entropy intermetallic alloy: Effect of nitrogen environment sintered microstructure and mechanical properties "0
Comparison between spark plasma sintering and hot extrusion for solid-state recycling of Al-Si-Cu-Fe alloy chips0
Microstructure, mechanical properties of dissimilar friction stir welded AA6063/AA5052 alloys, and optimization of process parameters using Box Behnken-TOPSIS approach0
Formation mechanism of surface exudation in Cu-Sn alloy prepared by horizontal continuous unidirectional solidification0
Effect of graphene codeposition on tribological behavior of Ni-plated anodic hard coating0
Evolution of the AA2030 alloy microstructure in the ECAP process0
Effect of heat treatment on the microstructure and fatigue behaviour of AISI 4130 steel0
Influence of tool rotational speed on the microstructure and mechanical behavior of friction stir processed AA 7050 aluminum alloy0
Numerical simulation of thermal conductivity of graphite flake/Cu composites with interfacial characteristics0
Research on the microstructure and electrical conductivity in hypereutectic Al-Si compacts and B4C added composites fabricated by conventional, microwave, and spark plasma sintering0
Fatigue crack growth behavior of Al 2014 alloy subjected to cryogenic rolling and post-rolled annealing0
Study on microstructure and properties of typical copper foils0
Creep behavior and microstructural characterization of iron-nickel and nickel-based superalloys0
Fracture mechanism of mechanically alloyed Al composite0
"Investigation of the effect of shot blasting on the surface properties of the HA coatings processed by the EPD method "0
Analysis of mechanical and microstructural characteristics of AISI 430 stainless steel welded by GMAW0
"High-cycle fatigue and tensile strength of AZ91 Mg alloy with MAO-epoxy duplex coating "0
Thermal properties and container compatibility of (Al0.8Si0.2)100−xBix phase change energy storage alloys0
Studying the impact of multi-pass friction stir processing on microstructure and mechanical properties of low-carbon steel0
Study of high-temperature deformation behavior and thermal processing diagram of cast TA15 titanium alloy0
Grain refinement, texture evolutions, and strengthening of a recycled aluminium alloy subjected to tube channel pressing0
Analysis of thermal deformation behavior and workability of 37CrS4 special steel0
Vanadium in copper-graphite composite0
An LSTM-PSO model for forecasting the flow behavior of a Ni-based superalloy during hot deformation0
Modeling roughness surface Rp of 3D selective laser melting metal materials0
Experimental study about the influence of Wire EDM parameters on surface roughness and kerf width of Ti-3Al-2.5V superalloy0
Stress corrosion cracking behavior of an as-extruded Mg-1.8Zn-0.5Zr-1.5Gd magnesium alloy in a simulated body fluid0
Effect of diamond particle type on the thermal properties of diamond/copper composites0
Diffusion behavior of Cr and V elements in the 50CrVA steel under high-temperature oxidation and surface treatment processes0
Experimental study on rapid evaluation of modification effect of hypoeutectic Al-Si alloy based on melt solidification process resistivity monitoring0
Effect of cold rolling reduction rate on high-temperature plasticity of 3207 duplex stainless steel0
Effect of electric field on high-temperature decarburization of 0.9%C-Fe steel0
Orthogonal experiment and hardening mechanism investigation on the effect of heat treatment parameter on Sb-modified Mg2Si/Al-8Si composites0
A novel method based on probability theory for simultaneous optimization of multi-object orthogonal test design in material engineering0
Taguchi analysis of shot peening parameters for surface hardness, wear resistance, roughness, and residual stress in Ti-6Al-4V alloy0
"The impact of shielding gas composition and welding speed on weld quality in MAG welding: An experimental study "0
0.053076982498169