Journal of Prosthetic Dentistry

Article	Citations
News and notes	302
Letter to the Editor regarding, “Antimycotic prophylaxis with multispecies probiotics against oral candidiasis in new complete denture wearers: A randomized clinical trial”	197
News and Notes	141
Use of aluminum foil to facilitate open-tray implant impressions	129
News and Notes	125
Sponsoring Organizations and Liaisons	122
Clinical performance of short and extrashort dental implants with wide diameter: A systematic review with meta-analysis	105
Analysis of the esthetic preferences of Spanish laypersons and dentists regarding the different width proportions of the maxillary anterior teeth	105
Coordinate-based data analysis of the accuracy of five intraoral scanners for scanning completely dentate and partially edentulous mandibular arches	99
Sponsoring Organizations and Liaisons	99
Response to Letter to the Editor regarding “Acceptability and deviation of finish line detection and restoration contour design in single-unit crown: Comparative evaluation between 2 AI-based CAD soft	98
News and Notes	92
Dental mini-implant designs to support overdentures: Development, biomechanical evaluation, and 3D digital image correlation	88
Bilabial-protruding, mouth-opening and tongue-depressing stent for proton radiation therapy	87
Utilizing additively manufactured custom devices to record mandibular motion by using optical jaw tracking systems: A dental technique	82
Comparison of masticatory performance and oral health-related quality of life between immediate and conventional loading protocols for an implant-supported mandibular overdenture: A systematic review	81
Can researchers attract serendipity?	75
A three-dimensionally printed template for locating the screw channel in a cement-retained implant-supported crown: A digital workflow	72
News and Notes	69
A cross-sectional study for prevalence and risk factors of peri-implant marginal bone loss	66
Digital replication of the peri-implant soft tissue contour of implant-supported crowns: A dental technique	65
Effect of industrial scanner and framework material interaction on the marginal gaps of CAD-CAM complete arch implant frameworks	64
Discrepancies of centric occlusion located by using a conventional method and four intraoral scanners combined with a computer-aided design program: A pilot investigation	64
Using autogenous tooth graft for alveolar ridge preservation: A systematic review and meta-analysis	63
Quality of life assessment in patients with a unilateral orbital defect provided with an interim prosthetic rehabilitation: A randomized crossover clinical trial	61

Alveolar ridge preservation in periodontally compromised molars with buccal or lingual bone defects: A retrospective case series	60
Dental prosthesis use and mortality: A time-varying exposure analysis with machine learning	60
Effect of cement space settings on the marginal and internal fit of 3D printed definitive resin crowns	58
CAD-CAM of elastic plugs with multilayer porous channels following 3D construction of jaw cyst-mucosa-dentition after decompression: A dental technique	57
Table of Contents	55
Digital design and fabrication of a guiding template for preparing occlusal rest seats in removable partial denture abutments	54
Fully guided workflow of an implant-supported auricular prosthesis for partial ear loss: A dental technique	53
Response to Letter to the Editor regarding, “Dental implant planning using artificial intelligence: A systematic review and meta-analysis”	52
Mechanical stability of dental CAD-CAM restoration materials made of monolithic zirconia, lithium disilicate, and lithium disilicate–strengthened aluminosilicate glass-ceramic with and without fatigue	50
Impact of dental restorations and removable prostheses on potentially malignant oral mucosal disorders in the general population	50
Digital workflow for definitive immediately loaded complete arch CAD-CAM implant-supported prosthesis in 3 appointments without using intraoral scanning	49
Influence of scan extension and starting quadrant on the accuracy of four intraoral scanners for fabricating tooth-supported crowns	49
Effect of different endodontic access preparations on the biomechanical behavior of lithium disilicate and resin nanoceramic onlay restorations: An in vitro and 3D finite element analysis study	49
News and Notes	48
Socket shield technique in implant dentistry: An AI-based bibliometric analysis	48
Evaluation of physicomechanical properties of milled versus 3D-printed denture base resins: A comparative in vitro study	47
Alignment accuracy of soft tissue and implant position scans captured by using four intraoral scanners and an intraoral photogrammetry system with and without coded healing abutments	47
Prosthetic rehabilitation associated with the use of high-power laser following pelveglossectomy and radiotherapy for oral squamous cell carcinoma: A clinical report	46
Effect of a dynamic navigation device on the accuracy of implant placement in the completely edentulous mandible: An in vitro study	45
Trueness of implant orientation transfer produced by intraoral scanning of maxillary complete arch implant-supported restoration using different scan body designs: An in vitro study	45
Three-dimensional finite element analysis of zygomatic implants for rehabilitation of patients with a severely atrophic maxilla	44
Estimating Ni, Cr, Co, and Mo release from 3 dental casting alloys in saliva and blood at 6 and 12 months by using inductively coupled plasma mass spectroscopy	44
Articulation distortion in Mandarin-speaking individuals with complete arch maxillary implant-supported fixed dental prostheses	44
Over 14-year survival of pressed e.max lithium disilicate glass-ceramic complete and partial coverage restorations in patients with severe wear: A prospective clinical study	43
Effectiveness of postprocessing on 3D printed resin biocompatibility in prosthodontics: A systematic review	42
Short-term and long-term success and survival rates of implants supporting single-unit and multiunit fixed prostheses: A systematic review and meta-analysis	42
Are implant-supported removable partial dentures a suitable treatment for partially edentulous patients? A systematic review and meta-analysis	42
Effects of long-term cinnamaldehyde immersion on the surface roughness and color of heat-polymerized denture base resin	41
Performance of the ChatGPT-3.5, ChatGPT-4, and Google Gemini large language models in responding to dental implantology inquiries	41
Effect of short-term increase in occlusal vertical dimension on masticatory muscle electrical activities and pressure-to-pain threshold: A crossover clinical study	40
Digital versus conventional prosthetic workflow for dental students providing implant-supported single crowns: A randomized crossover study	40
Response to Letter to the Editor regarding, “Effects of different denture cleaning procedures on denture surface and Candida albicans adhesion”	40
Nasal function in patients with maxillectomy using various obturator designs	40
Volumetric and dimensional accuracy assessment of CAD-CAM–manufactured dental prostheses from different materials	40
Influence of base design on the manufacturing accuracy of vat-polymerized diagnostic casts: An in vitro study	40
Effect of different surface treatments on the bond strength between light-polymerized hard chairside relining material and computer-aided design and computer-aided manufacturing (CAD-CAM) milled dentu	40
Effect of universal adhesives and self-etch ceramic primers on bond strength to glass-ceramics: A systematic review and meta-analysis of in vitro studies	39
Translucency and flexural strength of translucent zirconia ceramics	39
Evaluation of ceramic adherence to cobalt-chromium alloys fabricated by different manufacturing techniques	39
Minimally invasive approach to hypoplastic stains with complementary color neutralization: A clinical report	38
Clinical performance of direct composite resin versus indirect restorations on endodontically treated posterior teeth: A systematic review and meta-analysis	38
Accuracy of complete arch implant scans recorded by using intraoral and extraoral photogrammetry systems	38
Letter to Editor: Concerns regarding “A digital approach to creating a positioning tray for a multiple implant impression and its clinical application” by Wei et al	38
A simplified digital workflow for reestablishing the vertical dimension of occlusion in a complete arch implant-supported prosthesis: A clinical report	37
Effect of 2-ethylhexyl salicylate incorporation on the color stability of different maxillofacial silicone elastomers after outdoor weathering	37
A comparison between commercially available artificial intelligence-based and conventional human expert-based digital workflows for designing anterior crowns	37
Use of CAD-CAM technology and a suture-anchor system for peri-implant keratinized tissue augmentation in the reconstructed jaw: A dental technique	37
ChatGPT performance in prosthodontics: Assessment of accuracy and repeatability in answer generation	37
Comparing survival rates of endodontically treated teeth restored either with glass-fiber-reinforced or metal posts: A systematic review and meta-analyses	37
Influence of splinting scan bodies or incorporating three-dimensionally printed scan aids on the trueness of complete arch digital scans	36

The Essentials	36
The link between abutment configuration and marginal bone loss in subcrestally placed posterior implant-supported restorations	36
Influence of the postpolymerization type and time on the flexural strength and dimensional stability of 3D printed interim resins	35
Response to Letter to the Editor: Clinical perspectives on custom prefabricated healing abutments and interim abutment or Ti-base supported alternatives	35
Predictability of single versus double-barrel vascularized fibula flaps and dental implants in mandibular reconstructions: A systematic review and meta-analysis of prospective studies	35
CAD-CAM ceramic material options for discolored teeth	34
Digital verification and correction of digital intraoral scans for fixed implant rehabilitation of edentulous arches: A dental technique	34
Use of a dual-purpose implant scan body to obtain both digital and analog records for complete arch fixed implant restorations	34
Mechanical complications of implant-supported restorations with internal conical connection implants: A 14-year retrospective study	34
Vertical eruption of anterior maxillary teeth adjacent to single-implant–supported crowns: An assessment after a 3-year follow-up period	33
A technique to avoid the entrapment of excess residual luting cement in soft-tissue irregularities underneath fixed dental prostheses by using polytetrafluoroethylene tape	33
Improving wear resistance of acrylic resin denture teeth by using zirconia complete crowns fabricated with a CAD-CAM double-scanning method: A clinical report	33
Do preheated composite resin or adhesive resin layer strengthen the feldspar ceramic?	33
One-time definitive attachment connection versus healing abutment placement for an implant-retained mandibular overdenture: Peri-implant metabolic activity	32
Sponsoring Organizations and Liaisons	32
Three-dimensional analysis of the interchangeability of a semiadjustable articulator system in service over time	32
The patient-specific anatomical articulator	32
Analysis of flexural strength and Weibull modulus of printed and milled zirconia: A systematic review	31
Cast-free fabrication of a digital removable partial denture with a polyetheretherketone framework	31
Sponsoring Organizations and Liaisons	31
News and Notes	31
Impression material lodged in the hypopharynx: A clinical report	31
Mechanical and optical properties of additively manufactured denture base resin in different colors modified with antimicrobial substances: An in vitro study	31
Immediately loaded FP-1 interim fixed implant prosthesis for a patient with amelogenesis imperfecta using photogrammetry and a same day 3D printing protocol: A clinical report	31
Sponsoring Organizations and Liaisons	31
Table of Contents	31
Influence of anti-aliasing and pixel offset slicing parameters on dimensional accuracy and surface characteristics of digital light processing printed monolithic zirconia crowns: An in vitro study	31
Effect of different implant angulations and insertion-removal cycles on the retentive force of zirconia and coated titanium denture attachments: An in vitro study	31
Editorial Review Board	31
Methodological considerations regarding, "Wear resistance of 3D printed denture teeth: Influence of printing technology and build orientation"	31
Oral microbial colonization on titanium and polyetheretherketone dental implant healing abutments: An in vitro and in vivo study	30
A chairside technique for addressing food impaction in implant-supported crowns	30
Surface roughness, stainability, and translucency of additively manufactured zirconia with different build orientations and firing processes after coffee thermocycling	30
Effect of adding a peak marker device to an implant cantilever beam torque wrench on torque value measurement	30
Influence of tooth preparation design on margin discrepancy and internal gap in digitally fabricated fixed complete coverage zirconia prostheses: A systematic review of in vitro studies	30
Effect of silver diamine fluoride on the surface roughness of dental ceramics	29
A technique to verify implant abutment position intraorally by using a vacuum thermomolded guide	29
Trueness of the subgingival finish line of veneer preparation scanned using an intraoral optical coherence tomography system	29
Self-perception and self-representation preference between 2-dimensional and 3-dimensional facial reconstructions among dentists, dental students, and laypersons	29
Comparison of two arbitrary cast transfer systems with a kinematic facebow for mounting a maxillary cast on a semiadjustable articulator	29
Rotational path removable partial mandibular resection prostheses: A case series of patients with mandibular symphyseal defects	29
Clinical performance and patient-related outcome measures of digitally fabricated complete dentures: A systematic review and meta-analysis	29
Evaluation of the relationship between metallurgical properties and metal-ceramic bond characteristics of Co-Cr alloys manufactured by different techniques	28
Evaluation of clinical performance of additively manufactured and milled polyetheretherketone (PEEK) inlays compared with indirect composite resin inlays over a one-year follow-up: A randomized clinic	28
Clinical protocol for fabricating a custom mouthguard for a completely edentulous boxer	28
Stress distribution of different attachment systems in mandibular implant overdentures: A 3D finite element study	28
Accuracy of marginal and internal fit of additively manufactured single unit crowns: A systematic review and meta-analysis	28
Influence of different print orientations on properties and behavior of additively manufactured resin dental devices: A systematic review and meta-analysis	27
Comparative analysis of Candida spp. isolated from complete denture wearers with and without an HIV diagnosis	27
Development of 3-dimensionally printed denture base material utilizing hybrid polymer: A preliminary investigation	27
Evaluation of mandibular implant-supported fixed prosthesis retained by 3 dental implants, 1 straight and 2 angled: A retrospective clinical study	27
Assessing mechanical properties and biosafety of dental zirconia for 3D printing and CNC milling	27
Replacement of missing lateral incisors for patients with cleft lip and palate: A decision-making tree based on a systematic review of the literature	27
Transdentinal cytotoxicity of resin luting cements using the bovine and human dentin barrier	27
Combining CAD-CAM technology with the stamp technique for direct composite resin restorations	27
A smartphone-guided digital grid method for accurate iris positioning in an ocular prosthesis: A dental technique	26
Effect of different disinfection protocols on the surface properties of CAD-CAM denture base materials	26
Effect of a vinegar-hydrogen peroxide mixture on the surface properties of a cobalt-chromium alloy: A possible disinfectant for removable partial dentures	26
Annual review of selected scientific literature: A report of the Committee on Scientific Investigation of the American Academy of Restorative Dentistry	26
Biocompatibility of polymethyl methacrylate heat-polymerizing denture base resin copolymerized with antimicrobial monomers	26
Comparisons of analog and digital methods to produce an accurate trial restoration	26
Comparison of 3D changes of 3Y, 4Y, and 5Y zirconia single crowns under different sintering protocols	26
Use of an optical jaw tracking system to capture the envelope of function when designing interim and definitive prostheses: A dental technique	26
Clinical performance of CAD-CAM partial-coverage restorations: Experienced versus less-experienced operators	26
Anatomic CAD-CAM post-and-core systems: A mastication simulation study	26
Evaluation of prosthetic screw loosening in all-on-four implant-supported restorations with two different connection systems	26
A digital workflow for implants in the esthetic zone: A clinical report from dentofacial diagnosis to cast-free prosthesis delivery with a 1-year follow up	26
Effect of different surface treatments on the biaxial flexural strength of zirconia ceramics	26
Optimization of the dimension of computer numerical control–milled polyetheretherketone clasps: An in vitro evaluation of accuracy	26
Prosthetic rehabilitation of meth mouth with implant-supported fixed dental prostheses: A clinical report	26
Ultrasonographic assessment of the effects of unilateral mastication on the temporal and masseter muscles	26
Letter to the Editor regarding, “Screw loosening in angulation-correcting single implant restorations: A systematic review of in vitro studies” by Pitman et al	26
Magnitude of misfit threshold in implant-supported restorations: A systematic review	25
Response Letter to the Editor regarding, “Impact of WhatsApp on improving denture care knowledge and the awareness of the relationship between edentulism and general health”	25
Is temporomandibular joint involvement more frequent in patients with epilepsy? A clinical study	25
Performance and efficacy of a recently introduced diamond rotary instrument: Cutting, surface preparation, and cleanability	25
Immediate functional interim restoration at second-stage surgery: A digital protocol for efficient implant restoration	25
Five-year clinical evaluation of Class II lesions restored with three indirect CAD-CAM materials (glass-ceramic, polymer-infiltrated ceramic, and composite resin with nanoscale filler): A randomized c	25
Comparative analysis of the physical, chemical, and microbiological properties of Ti-6Al-4V disks produced by different methods and subjected to surface treatments	24
Table of Contents	24

An up to thirty-year retrospective study on the success and survival of single unit and splinted implant-supported crowns in a dental school setting	24
Evaluating augmented reality e-typodont to improve a patient’s dental implant health literacy	24
The 50 most cited articles on soft tissue integration of dental implants: A bibliometric analysis	24
Performance of fixed dental prostheses up to 6 years—A massive data analysis	24
Table of Contents	24
Material effects on the long-term survival and complication rate of cemented implant-supported single crowns: A retrospective clinical study	24
Measuring tooth movement with treatment using the Dahl principle: An observational study	24
Evaluation of the sealing capability and morphological fit of prefabricated dowels and fiber-reinforced composite resin: An in vitro study	24
Interimplant papilla reconstruction at second-stage surgery: A technique	24
Relationships between jaw deformity and the occlusal plane in cone beam computed tomography scans	24
A comparison of the shear bond strength between denture teeth and denture base resins manufactured either conventionally or with a 3D printer	23
The Essentials	23
A modified tray for making an ocular impression	23
Accuracy of complete arch nonsplinting and noncalibrated splinting implant scanning techniques recorded by using five intraoral scanners	23
Distortion of printed resin surgical guides after autoclave sterilization and chemical disinfection	23
Retrospective clinical study of monolithic zirconia crowns fabricated with a straightforward completely digital workflow	23
Dental implant-abutment fracture resistance and wear induced by single-unit screw-retained CAD components fabricated by four CAM methods after mechanical cycling	23
Effects of conventional and heated tobacco product smoking on discoloration of artificial denture teeth	23
Validity and reliability of a proposed anterior implant esthetic index (AIEI)	23
Effect of three-dimensionally printed surface patterns on the peak tensile load of a plasticized acrylic-resin resilient liner	23
Estimating the occurrence of labial bone perforation and implantation into the maxillary sinus maxillary premolars based on the morphology of maxillary premolars: A clinical study	23
Radiopaque fiducial markers as an aid to fabrication of an implant surgical guide for a patient with orthodontic brackets: A dental technique	23
Simulating mandibular movements and articulator design	22
Determining of canine position by multiple facial landmarks to achieve natural esthetics in complete denture treatment	22
Influence of gingival color on the color differences of dental laminate veneers	22
Wear resistance of 3D printed occlusal device materials	22
Analysis of risk factors related to early implant failure: A retrospective study	22
Letter to the Editor: Potential data overlap in meta-analysis of robotic vs. freehand implant accuracy	22
Evaluation of the intaglio surface shape of implant-supported complete-arch maxillary prostheses and its association with biological complications: An analytical cross-sectional study	22
Optimal design of the retainer and connector for a lithium disilicate resin-bonded fixed partial denture: A finite element analysis study	22
String theory and triangular plates- Letter to the Editor regarding the article, “Sleeve-free detachable handpiece-guided dental implant device for improved visibility and irrigation: A dental techniq	22
Postextraction ridge preservation by using dense PTFE membranes: A systematic review and meta-analysis	22
An in vitro evaluation of 2 methods for retrieving fractured abutment screw fragments from the intaglio of 4 different implant systems	22
Implant retained prosthesis on a free fibula flap: A challenging procedure for prosthetic and soft tissue management	22
Manufacturing accuracy of the intaglio surface of definitive resin-ceramic crowns fabricated at different print orientations by using a stereolithography printer	22
A technique for improved gingival esthetics on complete arch implant-supported acrylic resin prototype prosthesis	21
A two-year clinical trial of enamel wear opposing 5Y-TZP and lithium disilicate crowns	21
Virtual facebow techniques: A scoping review	21
Impact of profile angle of CAD-CAM abutment on the marginal bone loss of implant-supported single-tooth posterior restorations	21
A method for quantitative assessment of occlusal contacts recorded by a digital occlusal analysis system	21
Effect of implant loading protocols and associated factors on the success rate of implant therapy: A retrospective clinical study	21
The Frankfurt proportion: The ratio between anterior tooth size and occlusal vertical dimension	21
Influence of artificial landmarks on the accuracy of complete arch scans in the partially edentulous maxilla: An in vitro study	21
Complications of 3D printed dentures: A systematic review	21
Agreement between digitally predicted and clinically verified occlusal contacts in computer-aided design and computer-aided manufacture (CAD-CAM) occlusal devices: A cross-sectional study	21
Impact of implant-abutment connection design on biological and mechanical outcomes in posterior single-tooth restorations: A randomized clinical trial	20
Rapid Digital Conversion 2.0: A cast-less workflow for complete arch implant-supported restorations	20
Improving the precision of recordings acquired with digital occlusal analyzers: A dental technique	20
Masticatory function and cognition in older adults: A population-based study	20
Micro-CT analysis of marginal and internal fit of milled and pressed polyetheretherketone single crowns	20
Surface trueness and precision of interim restorations fabricated by digital light processing and CAD-CAM milling systems	20
Surface roughness and stainability of CAD-CAM denture base materials after simulated brushing and coffee thermocycling	20
Comparative analysis of the microbial profiles in supragingival and subgingival plaques obtained from different dental prostheses	20
Impact of macrogeometry on the primary stability and bone markers of dental implants: A prospective, controlled, randomized, split-mouth clinical study	20
Table of Contents	20
The Glossary of Prosthodontic Terms 2023	20
A fully digital approach to replacing an obturator prosthesis using a 3D printed closed hollow bulb: Α dental technique	20
Influence of coloring techniques on the surface characteristics and color stability of a monolithic zirconia ceramic	20
Investigation of candidal colonization and adhesion on various dental restorative materials: An in vitro study	20
Effect of connector height and retainer occlusal thickness on the fracture resistance of posterior 4-unit monolithic 5Y-TZP fixed partial dentures after thermomechanical aging	20
Clinical assessment of scanning deviations of four intraoral scanner systems following the cut-out and rescan procedures with dental dam isolation	20
Long-term assessment of the periodontal health of removable partial denture wearers: A systematic review and meta-analysis	20
Editorial Review Board	19
Letter to the Editor regarding, “Effect of antibacterial agents on dentin bonding system: A systematic review and meta-analysis” by Lin et al	19
Fabrication of CAD-CAM custom-made bar clip for implant-supported overdentures using an intraoral scanner: A dental technique	19
A completely digital workflow to fabricate a double-layered template for anterior esthetic veneers	19
Comments regarding Ereifej NS, Oweis YG, El Manaseer W, Al Omoush S, Abu Awwad M, Sartawi S. Simplified versus conventional complete dentures: A randomized crossover clinical trial. J Prosthet Dent 20	19
Patient satisfaction with different types of craniofacial prostheses	19
Direct guided restorations from planning to definitive restoration: A clinical report	19
Response to Letter to the Editor regarding, “An experimental study of flexural strength and hardness of zirconia and their relation to crown failure loads”	19
Effect of implant abutment screw materials and tightening protocols on reverse tightening values: An in vitro study	19
Can fiber placement influence the fracture resistance of endodontically treated teeth with indirect partial ceramic restorations? A systematic review and meta-analysis	19
Bonding affinity and durability of recycled zirconia	19
Graftless complete arch rehabilitation using a facial approach for enhanced bone anchorage and prosthetic outcomes: A clinical report	19
The Essentials	19
A digital workflow for fabricating a mandibular guide plane prosthesis for patients about to undergo hemimandibulectomy: A dental technique	19
Radiotherapy molds: An approach to fabricating facial moulage	19
The pull-through technique: A simplified clinical guide for anterior composite resin restorations	18
A comparison of a handheld minicomputer and an external graphics processing unit in performing 3D intraoral scans	18
A computer-assisted endodontic access technique to remove fiber posts	18
An analog-digital hybrid technique for immediate dentures with idealized border extensions	18
Constructing nasal prosthesis morphological data based on a nonrigid registration algorithm	18
Response to Letter to the Editor regarding “Evaluation of accuracy of deep learning and conventional neural network algorithms in detection of dental implant type using intraoral radiographic images:	18
Sponsoring Organizations and Liaisons	18
Effect of implant scan body geometric modifications on the trueness and scanning time of complete arch intraoral implant digital scans: An in vitro study	18
Immediate placement of a previously manufactured interim screw-retained implant-supported crown by using the implant position determined in the guided implant planning	17
Guided implant surgery workflow in edentulous patients: A precise and rapid technique	17
Changes in bone graft height and influencing factors after sinus floor augmentation by using the lateral window approach: A clinical retrospective study of 1 to 2 years	17
Dimensional accuracy of different dental CAD software programs in fixed partial denture construction: An in vitro study	17
Digital design and fabrication of a template to prepare guiding planes in removable partial denture abutments	17
Erratum to Comparison of postinsertion adjustments between conventional and immediate complete dentures and their association with denture survival [The Journal of Prosthetic Dentistry 134/4 (2025) 12	17
The diagnostic template in the digital era: A technique for fabricating a diagnostic trial restoration by using a two-piece additively manufactured index	17
Retrieval of fractured implant screw: A dental technique	17
Effect of multiple firings on the marginal fit of monolithic zirconia crowns: An in vitro study	17
Retrospective analysis of dental implant fracture following loading: A retrospective clinical study	17