Journal of Prosthetic Dentistry

Article	Citations
News and Notes	159
Sponsoring Organizations and Liaisons	122
Letter to the editor in regard to the article “Occlusal devices in France: An assessment of professional practice”	120
Sponsoring Organizations and Liaisons	91
Use of aluminum foil to facilitate open-tray implant impressions	85
Digital design and fabrication of a guiding template for preparing occlusal rest seats in removable partial denture abutments	82
Estimating Ni, Cr, Co, and Mo release from 3 dental casting alloys in saliva and blood at 6 and 12 months by using inductively coupled plasma mass spectroscopy	80
Dental mini-implant designs to support overdentures: Development, biomechanical evaluation, and 3D digital image correlation	78
Coordinate-based data analysis of the accuracy of five intraoral scanners for scanning completely dentate and partially edentulous mandibular arches	72
News and Notes	69
Can researchers attract serendipity?	69
Short-term and long-term success and survival rates of implants supporting single-unit and multiunit fixed prostheses: A systematic review and meta-analysis	69
CAD-CAM of elastic plugs with multilayer porous channels following 3D construction of jaw cyst-mucosa-dentition after decompression: A dental technique	67
Influence of splinting scan bodies or incorporating three-dimensionally printed scan aids on the trueness of complete arch digital scans	67
Letter to the Editor regarding, “Antimycotic prophylaxis with multispecies probiotics against oral candidiasis in new complete denture wearers: A randomized clinical trial”	66
News and Notes	63
Sponsoring Organizations and Liaisons	61
CAD-CAM milled complete dentures with custom disks and prefabricated artificial teeth: A dental technique	58
Impact of dental restorations and removable prostheses on potentially malignant oral mucosal disorders in the general population	58
Alignment accuracy of soft tissue and implant position scans captured by using four intraoral scanners and an intraoral photogrammetry system with and without coded healing abutments	55
Effect of industrial scanner and framework material interaction on the marginal gaps of CAD-CAM complete arch implant frameworks	55
Bilabial-protruding, mouth-opening and tongue-depressing stent for proton radiation therapy	54
Digital versus conventional prosthetic workflow for dental students providing implant-supported single crowns: A randomized crossover study	54
Discrepancies of centric occlusion located by using a conventional method and four intraoral scanners combined with a computer-aided design program: A pilot investigation	53
Influence of scan extension and starting quadrant on the accuracy of four intraoral scanners for fabricating tooth-supported crowns	51

Custom-fabricated nasal conformers and surgical stents in the management of midfacial acid burn injuries: A clinical report	51
Effect of 2-ethylhexyl salicylate incorporation on the color stability of different maxillofacial silicone elastomers after outdoor weathering	50
News and Notes	50
Analysis of the esthetic preferences of Spanish laypersons and dentists regarding the different width proportions of the maxillary anterior teeth	50
Nasal function in patients with maxillectomy using various obturator designs	49
A cross-sectional study for prevalence and risk factors of peri-implant marginal bone loss	49
Fracture resistance of additive manufactured and milled implant-supported interim crowns	47
Volumetric and dimensional accuracy assessment of CAD-CAM–manufactured dental prostheses from different materials	46
Over 14-year survival of pressed e.max lithium disilicate glass-ceramic complete and partial coverage restorations in patients with severe wear: A prospective clinical study	46
Clinical performance of short and extrashort dental implants with wide diameter: A systematic review with meta-analysis	45
Performance of the ChatGPT-3.5, ChatGPT-4, and Google Gemini large language models in responding to dental implantology inquiries	45
Effects of long-term cinnamaldehyde immersion on the surface roughness and color of heat-polymerized denture base resin	44
Effect of short-term increase in occlusal vertical dimension on masticatory muscle electrical activities and pressure-to-pain threshold: A crossover clinical study	43
Long-term effect of gastric juice alternating with brushing on the surface roughness, topography, and staining susceptibility of CAD-CAM monolithic materials	43
Evaluation of physicomechanical properties of milled versus 3D-printed denture base resins: A comparative in vitro study	43
Cast metal sprue as an alternative to dental floss for splinting open tray impression copings for complete-arch implant impressions	42
A comparison between commercially available artificial intelligence-based and conventional human expert-based digital workflows for designing anterior crowns	42
A three-dimensionally printed template for locating the screw channel in a cement-retained implant-supported crown: A digital workflow	41
Amphotericin B, fluconazole, and nystatin as development inhibitors of Candida albicans biofilms on a dental prosthesis reline material: Analytical models in vitro	40
Alveolar ridge preservation in periodontally compromised molars with buccal or lingual bone defects: A retrospective case series	40
Accuracy of complete arch implant scans recorded by using intraoral and extraoral photogrammetry systems	40
Management of unfavorable implant positions and angulations in edentulous maxillae with different complete-arch fixed prosthetic designs: A case series and clinical guidelines	40
Are implant-supported removable partial dentures a suitable treatment for partially edentulous patients? A systematic review and meta-analysis	40
Quality of life assessment in patients with a unilateral orbital defect provided with an interim prosthetic rehabilitation: A randomized crossover clinical trial	40
Comparing survival rates of endodontically treated teeth restored either with glass-fiber-reinforced or metal posts: A systematic review and meta-analyses	39
Using autogenous tooth graft for alveolar ridge preservation: A systematic review and meta-analysis	39
Edge chipping of translucent zirconia	39
Effect of a dynamic navigation device on the accuracy of implant placement in the completely edentulous mandible: An in vitro study	38
Articulation distortion in Mandarin-speaking individuals with complete arch maxillary implant-supported fixed dental prostheses	37
Effect of cement space settings on the marginal and internal fit of 3D printed definitive resin crowns	37
Evaluation of ceramic adherence to cobalt-chromium alloys fabricated by different manufacturing techniques	36
Utilizing additively manufactured custom devices to record mandibular motion by using optical jaw tracking systems: A dental technique	35
The link between abutment configuration and marginal bone loss in subcrestally placed posterior implant-supported restorations	35
Digital workflow for definitive immediately loaded complete arch CAD-CAM implant-supported prosthesis in 3 appointments without using intraoral scanning	35
Three-dimensional finite element analysis of zygomatic implants for rehabilitation of patients with a severely atrophic maxilla	34
Effectiveness of postprocessing on 3D printed resin biocompatibility in prosthodontics: A systematic review	34
Mechanical stability of dental CAD-CAM restoration materials made of monolithic zirconia, lithium disilicate, and lithium disilicate–strengthened aluminosilicate glass-ceramic with and without fatigue	34
News and notes	34
Translucency and flexural strength of translucent zirconia ceramics	34
Socket shield technique in implant dentistry: An AI-based bibliometric analysis	33
Effect of different endodontic access preparations on the biomechanical behavior of lithium disilicate and resin nanoceramic onlay restorations: An in vitro and 3D finite element analysis study	33
ChatGPT performance in prosthodontics: Assessment of accuracy and repeatability in answer generation	33
Effect of universal adhesives and self-etch ceramic primers on bond strength to glass-ceramics: A systematic review and meta-analysis of in vitro studies	33
Dental prosthesis use and mortality: A time-varying exposure analysis with machine learning	33
Digital replication of the peri-implant soft tissue contour of implant-supported crowns: A dental technique	33
Clinical performance of direct composite resin versus indirect restorations on endodontically treated posterior teeth: A systematic review and meta-analysis	32
Effect of zirconia etching solution on the shear bond strength between zirconia and resin cement	32
Influence of base design on the manufacturing accuracy of vat-polymerized diagnostic casts: An in vitro study	32
News and Notes	31
Sponsoring Organizations and Liaisons	31

JPD digital	30
Transdentinal cytotoxicity of resin luting cements using the bovine and human dentin barrier	30
Editorial Review Board	30
Effect of silver diamine fluoride on the surface roughness of dental ceramics	30
Effect of a vinegar-hydrogen peroxide mixture on the surface properties of a cobalt-chromium alloy: A possible disinfectant for removable partial dentures	30
The Essentials	30
Three-dimensional analysis of the interchangeability of a semiadjustable articulator system in service over time	30
A chairside technique for addressing food impaction in implant-supported crowns	30
Comparative analysis of Candida spp. isolated from complete denture wearers with and without an HIV diagnosis	30
Sponsoring Organizations and Liaisons	30
Evaluation of prosthetic screw loosening in all-on-four implant-supported restorations with two different connection systems	29
Letter to the Editor regarding, “Screw loosening in angulation-correcting single implant restorations: A systematic review of in vitro studies” by Pitman et al	29
Influence of the postpolymerization type and time on the flexural strength and dimensional stability of 3D printed interim resins	29
Oral microbial colonization on titanium and polyetheretherketone dental implant healing abutments: An in vitro and in vivo study	29
Optimization of the dimension of computer numerical control–milled polyetheretherketone clasps: An in vitro evaluation of accuracy	29
Evaluation of the relationship between metallurgical properties and metal-ceramic bond characteristics of Co-Cr alloys manufactured by different techniques	28
Analysis of flexural strength and Weibull modulus of printed and milled zirconia: A systematic review	28
Surface roughness, stainability, and translucency of additively manufactured zirconia with different build orientations and firing processes after coffee thermocycling	28
Anatomic CAD-CAM post-and-core systems: A mastication simulation study	28
Clinical performance and patient-related outcome measures of digitally fabricated complete dentures: A systematic review and meta-analysis	28
Effect of surface treatment and cleaning on the bond strength to polymer-infiltrated ceramic network CAD-CAM material	28
Biocompatibility of polymethyl methacrylate heat-polymerizing denture base resin copolymerized with antimicrobial monomers	28
Effect of different disinfection protocols on the surface properties of CAD-CAM denture base materials	28
Long-term results of a randomized clinical trial of 2 types of ceramic crowns in participants with extensive tooth wear	28
Influence of tooth preparation design on margin discrepancy and internal gap in digitally fabricated fixed complete coverage zirconia prostheses: A systematic review of in vitro studies	28
Table of Contents	28
Prosthetic rehabilitation of meth mouth with implant-supported fixed dental prostheses: A clinical report	27
One-time definitive attachment connection versus healing abutment placement for an implant-retained mandibular overdenture: Peri-implant metabolic activity	27
Mechanical complications of implant-supported restorations with internal conical connection implants: A 14-year retrospective study	27
Sponsoring Organizations and Liaisons	27
Effect of different surface treatments on the biaxial flexural strength of zirconia ceramics	26
Development of 3-dimensionally printed denture base material utilizing hybrid polymer: A preliminary investigation	26
Integration of intraoral scanning and conventional processing to fabricate a definitive obturator: A dental technique	26
Immediately loaded FP-1 interim fixed implant prosthesis for a patient with amelogenesis imperfecta using photogrammetry and a same day 3D-printing protocol: A clinical report	25
Comparison of two arbitrary cast transfer systems with a kinematic facebow for mounting a maxillary cast on a semiadjustable articulator	25
Response to letter to Editor on “Occlusal re-establishment and clinical complications of resin-bonded fixed partial dental prostheses (RBFPDP) cemented at an increased occlusal vertical dimension (OVD	25
Do preheated composite resin or adhesive resin layer strengthen the feldspar ceramic?	25
Predictability of single versus double-barrel vascularized fibula flaps and dental implants in mandibular reconstructions: A systematic review and meta-analysis of prospective studies	25
Vertical eruption of anterior maxillary teeth adjacent to single-implant–supported crowns: An assessment after a 3-year follow-up period	25
Mechanical and optical properties of additively manufactured denture base resin in different colors modified with antimicrobial substances: An in vitro study	25
Cast-free fabrication of a digital removable partial denture with a polyetheretherketone framework	25
Reducing the need to maintain fixed complete dentures by providing gold occlusal surfaces: A clinical report	25
Comparisons of analog and digital methods to produce an accurate trial restoration	25
Improving wear resistance of acrylic resin denture teeth by using zirconia complete crowns fabricated with a CAD-CAM double-scanning method: A clinical report	24
Impression material lodged in the hypopharynx: A clinical report	24
Influence of different print orientations on properties and behavior of additively manufactured resin dental devices: A systematic review and meta-analysis	24
Evaluation of clinical performance of additively manufactured and milled polyetheretherketone (PEEK) inlays compared with indirect composite resin inlays over a one-year follow-up: A randomized clinic	24
Self-perception and self-representation preference between 2-dimensional and 3-dimensional facial reconstructions among dentists, dental students, and laypersons	24
Rotational path removable partial mandibular resection prostheses: A case series of patients with mandibular symphyseal defects	24
A technique to verify implant abutment position intraorally by using a vacuum thermomolded guide	24
Use of an optical jaw tracking system to capture the envelope of function when designing interim and definitive prostheses: A dental technique	24
Evaluation of mandibular implant-supported fixed prosthesis retained by 3 dental implants, 1 straight and 2 angled: A retrospective clinical study	24
Magnitude of misfit threshold in implant-supported restorations: A systematic review	23
Replacement of missing lateral incisors for patients with cleft lip and palate: A decision-making tree based on a systematic review of the literature	23
A completely digital approach to replicating functional and esthetic parameters in mandibular implant-supported complete-arch prostheses	23
Use of a dual-purpose implant scan body to obtain both digital and analog records for complete arch fixed implant restorations	23
A technique to avoid the entrapment of excess residual luting cement in soft-tissue irregularities underneath fixed dental prostheses by using polytetrafluoroethylene tape	23
A digital workflow for implants in the esthetic zone: A clinical report from dentofacial diagnosis to cast-free prosthesis delivery with a 1-year follow up	23
Effect of different implant angulations and insertion-removal cycles on the retentive force of zirconia and coated titanium denture attachments: An in vitro study	23
Digital verification and correction of digital intraoral scans for fixed implant rehabilitation of edentulous arches: A dental technique	23
Clinical performance of CAD-CAM partial-coverage restorations: Experienced versus less-experienced operators	22
A two-year clinical trial of enamel wear opposing 5Y-TZP and lithium disilicate crowns	22
Is temporomandibular joint involvement more frequent in patients with epilepsy? A clinical study	22
Effect of pulp chamber depth on the accuracy of endocrown scans made with different intraoral scanners versus an industrial scanner: An in vitro study	22
Comparison of the strain developed around implants with angled abutments with two reinforced polymeric CAD-CAM superstructure materials: An in vitro comparative study	22
Effect of three-dimensionally printed surface patterns on the peak tensile load of a plasticized acrylic-resin resilient liner	22
Table of Contents	22
The patient-specific anatomical articulator	22
A comparison of the shear bond strength between denture teeth and denture base resins manufactured either conventionally or with a 3D printer	22
Evaluating augmented reality e-typodont to improve a patient’s dental implant health literacy	22
Influence of coloring techniques on the surface characteristics and color stability of a monolithic zirconia ceramic	21
A fully digital approach to replacing an obturator prosthesis using a 3D printed closed hollow bulb: Α dental technique	21
Estimating the occurrence of labial bone perforation and implantation into the maxillary sinus maxillary premolars based on the morphology of maxillary premolars: A clinical study	21
Complications of 3D printed dentures: A systematic review	21
Simulating mandibular movements and articulator design	21
Evaluation of the sealing capability and morphological fit of prefabricated dowels and fiber-reinforced composite resin: An in vitro study	21
Performance of fixed dental prostheses up to 6 years—A massive data analysis	21
A technique for improved gingival esthetics on complete arch implant-supported acrylic resin prototype prosthesis	21
Table of Contents	21
Fabrication of additively manufactured custom impression copings based on stock abutments	21

Performance and efficacy of a recently introduced diamond rotary instrument: Cutting, surface preparation, and cleanability	21
Implant retained prosthesis on a free fibula flap: A challenging procedure for prosthetic and soft tissue management	21
A modified tray for making an ocular impression	20
Dental implant-abutment fracture resistance and wear induced by single-unit screw-retained CAD components fabricated by four CAM methods after mechanical cycling	20
Accuracy of complete arch nonsplinting and noncalibrated splinting implant scanning techniques recorded by using five intraoral scanners	20
Comparative analysis of the physical, chemical, and microbiological properties of Ti-6Al-4V disks produced by different methods and subjected to surface treatments	20
The Essentials	20
Retrospective clinical study of monolithic zirconia crowns fabricated with a straightforward completely digital workflow	20
Effect of implant loading protocols and associated factors on the success rate of implant therapy: A retrospective clinical study	20
Table of Contents	20
Analysis of risk factors related to early implant failure: A retrospective study	20
Interimplant papilla reconstruction at second-stage surgery: A technique	20
Effects of conventional and heated tobacco product smoking on discoloration of artificial denture teeth	20
Validity and reliability of a proposed anterior implant esthetic index (AIEI)	20
An up to thirty-year retrospective study on the success and survival of single unit and splinted implant-supported crowns in a dental school setting	20
Influence of gingival color on the color differences of dental laminate veneers	20
Effect of layer thickness setting on the adaptation of stereolithography apparatus–fabricated metal frameworks for removable partial dentures: An in vitro study	20
Surface trueness and precision of interim restorations fabricated by digital light processing and CAD-CAM milling systems	20
The 50 most cited articles on soft tissue integration of dental implants: A bibliometric analysis	20
Influence of artificial landmarks on the accuracy of complete arch scans in the partially edentulous maxilla: An in vitro study	20
Improving the precision of recordings acquired with digital occlusal analyzers: A dental technique	20
Virtual facebow techniques: A scoping review	19
Micro-CT analysis of marginal and internal fit of milled and pressed polyetheretherketone single crowns	19
Wear resistance of 3D printed occlusal device materials	19
Relationships between jaw deformity and the occlusal plane in cone beam computed tomography scans	19
Surface roughness and stainability of CAD-CAM denture base materials after simulated brushing and coffee thermocycling	19
Optimal design of the retainer and connector for a lithium disilicate resin-bonded fixed partial denture: A finite element analysis study	19
Distortion of printed resin surgical guides after autoclave sterilization and chemical disinfection	19
Impact of profile angle of CAD-CAM abutment on the marginal bone loss of implant-supported single-tooth posterior restorations	19
Masticatory function and cognition in older adults: A population-based study	19
Response Letter to the Editor regarding, “Impact of WhatsApp on improving denture care knowledge and the awareness of the relationship between edentulism and general health”	19
Measuring tooth movement with treatment using the Dahl principle: An observational study	19
Determining of canine position by multiple facial landmarks to achieve natural esthetics in complete denture treatment	19
Impact of implant-abutment connection design on biological and mechanical outcomes in posterior single-tooth restorations: A randomized clinical trial	19
An in vitro evaluation of 2 methods for retrieving fractured abutment screw fragments from the intaglio of 4 different implant systems	19
Evaluation of the intaglio surface shape of implant-supported complete-arch maxillary prostheses and its association with biological complications: An analytical cross-sectional study	19
Postextraction ridge preservation by using dense PTFE membranes: A systematic review and meta-analysis	19
Manufacturing accuracy of the intaglio surface of definitive resin-ceramic crowns fabricated at different print orientations by using a stereolithography printer	19
Fabrication of CAD-CAM custom-made bar clip for implant-supported overdentures using an intraoral scanner: A dental technique	18
The Essentials	18
The Glossary of Prosthodontic Terms 2023	18
An indirect method of verifying passive fit of complete arch implant-supported frameworks fabricated from photogrammetry scans	18
Automated scoring and augmented reality visualization software program for evaluating tooth preparations	18
Radiopaque fiducial markers as an aid to fabrication of an implant surgical guide for a patient with orthodontic brackets: A dental technique	18
Direct guided restorations from planning to definitive restoration: A clinical report	18
Comments regarding Ereifej NS, Oweis YG, El Manaseer W, Al Omoush S, Abu Awwad M, Sartawi S. Simplified versus conventional complete dentures: A randomized crossover clinical trial. J Prosthet Dent 20	18
Effect of connector height and retainer occlusal thickness on the fracture resistance of posterior 4-unit monolithic 5Y-TZP fixed partial dentures after thermomechanical aging	18
Long-term assessment of the periodontal health of removable partial denture wearers: A systematic review and meta-analysis	18
Editorial Review Board	18
Effect of multiple firings on the marginal fit of monolithic zirconia crowns: An in vitro study	17
A digital workflow for tooth-supported complete overdentures with a composite resin injection technique to manage the treatment of a child with ectodermal dysplasia	17
Estimation of microbiota and interleukin-1 beta in tears and conjunctival secretions of patients with ocular defects after using unilateral ocular prosthesis	17
Comparative clinical evaluation of removable partial denture frameworks fabricated traditionally or with selective laser melting: A randomized controlled trial	17
Effect of serum vitamin D, calcium, and phosphorus on mandibular residual ridge resorption in completely edentulous participants: A clinical study	17
The Essentials	17
Funding assistance and global productivity in the field of implant overdentures: A bibliometric analysis of 35 years	17
Efficacy of a radiographic film holder adapter in generating radiographs of dental implants with improved geometric accuracy and sharpness	17
Effect of different surface treatments on PEEK-enamel bonds: Bonding durability and mechanism	17
A completely digital workflow to fabricate a double-layered template for anterior esthetic veneers	17
Changes in bone graft height and influencing factors after sinus floor augmentation by using the lateral window approach: A clinical retrospective study of 1 to 2 years	16
Response to Letter to the Editor regarding, “An experimental study of flexural strength and hardness of zirconia and their relation to crown failure loads”	16
Time-and cost-effective 3-dimensional-printing workflow to rehabilitate worn dentitions: A clinical report	16
Optimizing the esthetic outcome by using screw-retained implant abutment crowns: A 3-year clinical follow-up	16
Radiotherapy molds: An approach to fabricating facial moulage	16
Polytetrafluoroethylene relative isolation for adhesive cementation of dental restorations	16
Associated variables of peri-implant bone resorption for dental implants placed in the fibular reconstructed maxilla and mandible of patients with oral cancer: A retrospective clinical study	16
Does the interimplant scan body distance impact the scanning accuracy of an intraoral photogrammetry system?	16
Effect of reusing impression posts and scan bodies on recording accuracy	16
Radiographic template used to facilitate the alignment of digital scans to computed tomography scans with extensive beam hardening artifacts	16
Visual and instrumental color evaluation of computerized color matching system for color reproduction of maxillofacial prostheses	16
Immediate placement of a previously manufactured interim screw-retained implant-supported crown by using the implant position determined in the guided implant planning	16
Evaluation and comparison of retention and patient satisfaction with milled polyetheretherketone versus metal maxillary obturators	16
Effect of implant abutment screw materials and tightening protocols on reverse tightening values: An in vitro study	16
Mounting digital casts on a virtual articulator by using two-dimensional facial photographs with a facebow: A technique	16
Letter to the Editor regarding “Effect of daily use of an enzymatic denture cleanser on Candida albicans biofilms formed on polyamide and poly(methyl methacrylate) resins: An in vitro study.” J Prosth	16
Effect of sealing gel on the microleakage resistance and mechanical behavior during dynamic loading of 3 implant systems	16
The future of dental research and clinical care: Big data and blockchain technology	16
Comparison of loupes versus microscope-enhanced CAD-CAM crown preparations: A microcomputed tomography analysis of marginal gaps	15
Illuminant metameric effects on interbrand and intrabrand color differences of direct composite resins	15
Bonding affinity and durability of recycled zirconia	15
Digitally designed and additively manufactured tooth reduction guides for porcelain laminate veneer preparations: A clinical report	15
A digital workflow for fabricating an interim obturator after partial maxillary resection	15
Flexural strength and mode of failure of interim implant-supported fixed dental prostheses following different conversion techniques and structural reinforcement	15
The diagnostic template in the digital era: A technique for fabricating a diagnostic trial restoration by using a two-piece additively manufactured index	15
Prospective cohort study to evaluate narrow diameter implants for the restoration of a missing maxillary lateral incisor in patients with a cleft palate: Five-year results	15
Clinical performance of and patient satisfaction with conventional complete dentures with different occlusal schemes: A systematic review of systematic reviews	15
Immediate loading of definitive restorations in partially edentulous patients requiring an implant-supported prosthesis: A scoping review	15
An analog-digital hybrid technique for immediate dentures with idealized border extensions	15
Comparison of tensile properties and porcelain bond strength in metal frameworks fabricated by selective laser melting using three different Co-Cr alloy powders	15
Patient satisfaction with different types of craniofacial prostheses	15
A digital workflow for fabricating a mandibular guide plane prosthesis for patients about to undergo hemimandibulectomy: A dental technique	15
Guided implant surgery workflow in edentulous patients: A precise and rapid technique	15
The pull-through technique: A simplified clinical guide for anterior composite resin restorations	15
Comparison of vertical marginal gap and internal fit of chairside laminate veneers fabricated from advanced versus conventional lithium disilicate ceramics: An in vitro study	15
Sponsoring Organizations and Liaisons	15