Journal of Macromolecular Science Part B-Physics

Papers
(The TQCC of Journal of Macromolecular Science Part B-Physics is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-04-01 to 2024-04-01.)
ArticleCitations
Artificial Neural Network Modeling of the Water Absorption Behavior of Plantain Peel and Bamboo Fibers Reinforced Polystyrene Composites31
Preparation of Self-healing Natural Rubber/Polycaprolactone (NR/PCL) Blends20
Enhanced Dielectric Properties of the ZnO and TiO2 Nanoparticles Dispersed Poly(Vinyl Pyrrolidone) Matrix-Based Nanocomposites17
Experimental Analysis and Optimization of Mechanical and Physical Properties of Light-Weight Bulk Molding Compound by Design of Experiment12
Broadband Radio Frequency Dielectric Permittivity and Electrical Conductivity of Dispersed Tin Oxide and Silica Nanoparticles in Poly(Ethylene Oxide)/Poly(Methyl Methacrylate) Blend Matrix-Based Nanoc10
Polyvinyl Butyral with Different Acetalization Degrees: Synthesis and Solubility Parameters9
Preparation of Chitosan/Polyvinyl Alcohol Electrospinning Nano-Membranes Using the Green Solvent, Plasma Acid8
Synthesis and Application of Covalently Grafted Magnetic Graphene Oxide Carboxymethyl Cellulose Nanocomposite for the Removal of Atrazine From an Aqueous Phase8
In-vitro Degradation Behaviors of Poly(L-lactide-co-glycolide-co-ε-caprolactone) Microspheres8
Empirical Determination of Pressure-Volume-Temperature-Entropy Equation of State of Polyethylene in Isothermal, Isobaric and Isochoric Ensembles8
Thermal, Optical, and Color Modification in Makrofol VLG 7-1 Nuclear Track Detector Due to Gamma Irradiation8
Surface Hydrophilic Modification of Polypropylene Fibers and Their Application in Fiber-Reinforced Cement-Based Materials8
Phase Structure Analysis and Composition Optimization of Poly(Lactic Acid)/Poly(Butylene Adipate-co-terephthalate) Blends7
Structure and Properties of Multi-walled Carbon Nanotube/Acrylonitrile Butadiene Styrene Nanocomposite Specimens Prepared by Fused Deposition Modeling7
Diffusion Kinetics of Vitamin B12 from Alginate and Poly(vinyl acetate) Based Gel Scaffolds for Targeted Drug Delivery7
Compositional Influence of Synthesized Magnetic Nanoparticles on Epoxy Composites: Dielectric, Magnetic, and Optical Characteristics7
Empirical Determination of the Partition Function of Polyethylene Based on Its Pressure-Volume-Temperature-Entropy Isochoric Equation of State6
Effects of Chitosan and Nano Titanium Dioxide on the Mechanical, Physicochemical and Antibacterial Properties of Corn Starch Films6
Direct Resinification of Two (1→3)-β-D-Glucans, Curdlan and Paramylon, via Hot-Press Compression Molding6
Antibacterial Activity of AgNO3Incorporated Polyacrylonitrile/Polyvinylidene Fluoride (PAN/PVDF) Electrospun Nanofibrous Membranes and Their Air Permeability Properties6
Polyacrylonitrile (PAN)/Polyvinyl Alcohol (PVA) Electrospun Nanofibrous Membranes Synthesis, Characterizations, and their Air Permeability Properties6
Preparation of Poly(Acrylic Acid) Grafted Reduced Graphene Oxide/Polyacrylamide Composite Hydrogels with Good Electronic and Mechanical Properties by in-situ Polymerization6
An Insight into the Diffusion of Unsaturated Polyester (UP) Resin into Expanded Graphite (EG) to Improve the Mechanical Properties of the UP/EG Composites6
Preparation and Properties of Poly(D,L-lactide-co-glycolide-co-ε-caprolactone)/1,4-Butanediamine Modified Poly(lactide-co-glycolide) Blend Porous Microspheres6
Anti-Bacterial Activity of Chitosan-Alginate-Poly (Vinyl Alcohol) Hydrogel Containing Entrapped Peppermint Essential Oil6
Effect on the Viscometric Properties of Sodium Carboxymethylcellulose in a Dimethylacetamide and Acetone Mixture6
A Thermal Conductive Epoxy Composite based on Spherical MgO Particles and Boron Nitride Sheets6
Mechanistic Study of the Flame Retardancy of Epoxy Resin With a Novel Phosphorus and Silicon-Containing Flame Retardant5
Polyvinyl Butyral/SiO2 Nanoparticles Composite Coating on Poly(vinylidene fluoride) Separators for Lithium-Ion Batteries5
Preparation and Degradation Behaviors of Poly(L-lactide-co-glycolide-co-ε-caprolactone)/1,4-butanediamine Modified Poly(lactic-co-glycolic acid) Blend Film5
A Facile Method for Selection of Solvents for Fabrication of Polypropylene Membranes by Thermally Induced Phase Separation5
Investigation of the Effect of Diisocyanate on the Thermal Degradation Behavior and Degradation Kinetics of Polyether-Based Polyurethanes5
Synthesis and Characterization of ZnO Nanoparticles and Their Natural Rubber Composites5
Preparation and Properties of BN/Si3N4/Epoxy Composites5
Empirical Determination of the Pressure–Volume– Temperature–Entropy Equation of State of Polyethylene in Isothermal, Isobaric and Isochoric Ensembles: II. Correlation Between the Equations of State in5
Optimization and Characterization of Polyurethane Electro-Spun Nano-Membranes Used for the Surfaces of Sound Absorbent Multi-Layer Sheets5
Remediation of Vanadium (V) and Chromium (III) Ions from Aqueous Media by Modified Nanocellulose Obtained from Coconut Coir5
Empirical Determination of the Internal Energy of Polyethylene based on the Pressure-Volume-Temperature-Entropy Equation of State5
Fire Retardancy and Thermogravimetric Kinetics of Thiol-Ene Degradation as Affected by Added 9,10-Dihydro-9-Oxa-10-Phosphaphenanthrene-10-Oxide (DOPO)5
Novel Polysilicone Flame-Retardant Functionalized Carbon Nanotubes: Synthesis, Characterization and Flame Retardancy as Used in Epoxy-Based Composites5
Characterization, Antistatic Treatment and Spinnability of Bio-based Polyamide 5,6 Staple Fibers5
Tribological Behavior and Thermal Stability of Thermoplastic Polyimide/Poly (Ether Ether Ketone) Blends at Elevated Temperature5
Recrystallization Behavior and Mechanical, and Carbonizing Properties of Feather Keratin Resin Sheets Produced by Hot-Compression Molding5
Rheological Behavior of a Quaternary Ammonium Copolymer in the Presence of Inorganic Salts5
Preparation of Zinc Hydroxystannate Coated Dendritic-Fibrillar Barium Carbonate and its Flame Retardant Effect on Soft Poly (Vinyl Chloride)5
Preparation and Mechanical, Thermal and Oil-resistance Properties of Acrylic Rubber Nanocomposites Reinforced with Cellulose Nanocrystals4
Preparation and Characterization of Poly(l-lactide-co-glycolide-co-ε-caprolactone) Porous Microspheres4
Semi-Crystalline Polyaniline with an Enhanced Conductivity Synthesized with a Novel Binary Dopant Sulfonic Acid-Surfactant: Mechanical, Electrical and Shielding Performances of Nylon/PANI Conductive F4
Crosslinked Low-Density Polyethylene/Polyhedral Oligomeric Silsesquioxanes Composites: Effects of Crosslinker Concentration on the Mechanical, Thermal, Rheological, and Shape Memory Properties4
Optimization of Key Parameters Affecting Swelling Capacity of Poly(acrylamide-co-acrylic acid) Hydrogels in Salt Water Using Response Surface Methodology (RSM)4
Synergistic Effects of Thermal and Near-Infrared Radiation Heating on the Self-Healing Effect of Shape Memory Polyethylene Elastomer Nanocomposites4
Effect of a Novel Graphene on the Flame Retardancy and Thermal Degradation Behavior of Epoxy Resin4
Functionalization of Graphene Oxide with Polysilicone: Synthesis, Characterization and Fire Retardancy in Thiol-Ene Systems4
Kinetic Study of the Effect of the Micellar Concentration of Sodium Dodecyl Sulfate on the Spectroscopic, Morphological and Electrical Characteristics of a Polyaniline Prepared by a Hybrid Micro-Nanoe4
Dielectric Response Triggered by a Non-ferroelectric Phase Transition in Poly(Vinylidene Fluoride)/Poly(Ethylene Glycol)/Halloysite Composites4
Photodegradation of Decabromo Diphenyl Ether Flame Retardant in Poly (Acrylonitrile Butadiene Styrene) (ABS)4
Comprehensive Study of the Effect of the Addition of Four Drag Reducing Macromolecules on the Pressure Drop and Heat Transfer Performance of Water in a Finned Tube Heat Exchanger4
Effect of Organoclay on the Rheology, Morphology, Thermal and Mechanical Properties of Nanocomposite Fibers Based on Polypropylene/Poly(Trimethylene Terephthalate)/Organoclay4
Characterization of β-Cyclodextrin Hybridized Diatomite as Potential Delivery Systems of Oxaliplatin and 5-Fluorouracil Drugs; Equilibrium Modeling of Loading and Release Kinetics4
Synthesis, Characterization and Demulsification Performance of Polymethylamyldiallylammonium Chloride4
Anomalous Phase Transition, Polarization Switching, and Relaxation in a Novel Composite Consisting of Dimethylammonium Aluminum Sulfate Hexahydrate and Oxidized Multiwalled Carbon Nanotubes3
Performance of SiO2 Filled Functional Polypropylene Substrates for 5th Generation Communication3
Synergistic Action of Polyethylene Glycol/Expanded Graphite/Cellulose Nanofibers With Superior Infrared Stealth Performance3
Improvement in Thermal Conductivity of Through-Plane Aligned Graphite Flake/Silicone Modified Epoxy Resin Composites3
Rheological, Mechanical, and Thermal Properties of Ultrahigh Molecular Weight Polypropylene/Low Molecular Weight Polypropylene Blends3
Empirical Determination of the Isoenthalpic and Isoentropic Equations of State of Polyethylene Based on the Pressure–Volume–Temperature–Entropy Equation of State3
Nanocomposite Membranes Based on Imidazole-Functionalized Chitin Nanowhiskers for Direct Methanol Fuel Cell Applications3
Interrelation Between Ionic Conduction and Ions Fraction of Biopolymer Electrolytes Based on Alginate Doped With NH4Cl3
Effect of Multi-Monomer Grafted Polyolefin Elastomer/Polypropylene on the Structure and Properties of Polypropylene/Montmorillonite Nanocomposites3
Crystallization, Phase and Mechanical Behaviors of Linear Low Density Polyethylene/Thermoplastic Polyolefin Elastomer Blends3
Effect of Micelle Size on the Dielectric Relaxation and Dynamic Behavior of Reverse Micelles Using the Open-Ended Coaxial Line Technique3
Adsorptive Removal of Methylene Blue Dye from Aqueous Solutions by Polyvinyl Alcohol/Activated Carbon Nanocomposite Hydrogels3
A New Monte Carlo Simulation of Low-Density-Polyethylene Polymerization for Prediction of its Microstructure as a Result of Various Process Conditions3
Fabrication and Characterization of Zwitterionic Coatings with Anti-oil and Anti-biofouling Activities3
Fire Retardancy and Thermal Degradation Kinetics of Epoxy Composites Containing Polyaminopropylphenylsilsesquioxane3
Preparation and Properties of Sodium Alginate/Silk Fibroin Microcarriers3
Preparation and Adsorption Performance of Cellulose Acetate Fiber-Chitosan/Titanium Dioxide Surface Layers Composite Membranes Prepared Based on a Sol-Gel Method3
Design of Experiments for the Effect of pH, Storage Time and Zinc Oxide Content on the Antibacterial Properties of Low-Density Polyethylene (LDPE)/Zinc Oxide Nanocomposites3
Empirical Determination of the Pressure-Temperature Phase Diagram of Polyethylene Based on the Pressure-Volume-Temperature-Entropy Gibbs Free Energy Equation of State3
A pH-Sensitive Chitosan/Oxidized-Kappa-Carrageenan based Nano-Antibiotic for Sustained and Controlled Release of Amoxicillin2
Controlled Release of Novel Volatile Corrosion Inhibitor (VCI) Nanoparticles Incorporated in Low Density Polyethylene (LDPE) Films for Steel Coverings: Correlation of Experimental Results with Molecul2
Polymerization Mechanism and Kinetics of Preparation of Methacrylic Acid-Ethyl Acrylate Copolymer Emulsion Reverse Demulsifier2
Characterization of Amphiphilic Cobaltocenium Copolymers via Size Exclusion Chromatography with Online Laser-Light Scattering and Viscometric Detectors2
Effect of Tetrapropylammonium Iodide Doping Amounts on the Structural, Electric and Optical Characteristics of the PVA/PVP2
The Effect of Type of Filler on Microphase Separation and Reinforcement in Polyurethane Based Composites2
Thermal Degradation, Kinetic Analysis and Char Formation in the Pyrolysis of Poly(melamine-co-phenolic resin) Copolymer2
Exploration of the Nucleation-Growth Effect of Cetyltrimethylammonium Bromide for High β-Poly(Vinylidene Fluoride) Crystallization2
Calcium Salt of L-Isoleucine-Phthalate: An α-Nucleating Agent That Enhances the Crystallization Behavior and Mechanical Properties of Isotactic Polypropylene2
Largely Improved Mechanical Properties of Polyurethane Nanocomposites via In Situ Polymerization with Low Loading of Graphene Oxide2
Thermal Properties of Olive Pomace Filled Linear Low Density Polyethylene Bio-Composites2
In Situ Biomineralized Phosphorylated Poly(l-Glutamic Acid)/Sodium Alginate Injectable Hydrogels2
Composite Polypropylene Fibers Modified with High Density Polyethylene and Graphene2
Preparation and High-temperature Resistance of Phenolic Resin/Silicone Rubber Ceramifiable Composites2
Study on Preparation and Performance of Reactive Polyurethane Hot Melt Adhesives Based on a Polycarbonate Diol and a Polyester Diol2
A Study on the Physical Properties of Polycarbonate/Acrylonitrile-Butadiene-Styrene Blends with Various Thermal Stabilizers to Secure the Safety of Automobile Passengers2
Modification of Heterocyclic Para-Aramid Fibers with Chlorine Groups and the Interfacial Properties of the Fiber/Epoxy Composites2
Miscibility of Poly(Methyl Methacrylate) and Poly(Vinylidene Fluoride) Examined by Thermally Stimulated Depolarization Current and Dielectric Relaxation Spectroscopy2
Preparation and Biocompatibility Characterization of Regenerated Silk Fibroin Films2
Effect of Rosin Resin on the Properties of Natural Rubber/Polyester Layered Fibers2
Synthesis and In Situ Gelation Behavior of Thermoresponsive Poly(N-isopropylacrylamide)/Chitosan Microgels2
Synergistic Effects of Multi-Wall Carbon Nanotubes and Polycaprolactone on the Thermal and Mechanical Properties of Polylactic Acid2
Optical and Color Investigation of the Effect of Laser Radiation on Polyaniline/Polyvinyl Pyrrolidone/Zinc Sulfide Nanocomposite Films2
Empirical Determination of the Partition Function of Polyethylene Based on Its Pressure-Volume-Temperature-Entropy Isochoric Equation of State. II. The Pressure and Entropy Expressed by the Modified P2
Kinetic Evaluation of 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide as a Flame Retardant for Epoxy Resins2
Influence of the Matrix Molecular Weight on the Morphology and Properties of Poly(Ethylene Terephthalate)/Poly(Ethylene-Octene) Blends2
Effect of Reactive Extrusion Process Parameters on Thermal, Mechanical, and Physical Properties of Recycled Polyamide-6: Comparison of Two Novel Chain Extenders2
Crystallization Behavior of Bombyx mori Silkworm Fibroin in Liquid Silk in Static and Flow States: Influence of the Interactions of the Sericin Fractions with the Fibroin2
Non-isothermal Crystallization Kinetics Behavior of Pure Low-density Polyethylene and Low-density Polyethylene/Styrene-butadiene Rubber Thermoplastic Vulcanizates2
Preparation and Properties of Composite Hydrogels Based on Microgels Containing Chitosan2
Effect of Phenolic Resin and Nano-Calcium Carbonate Particles on the Curing Kinetic of Epoxy Composites2
Electro-Optical and Thermophysical Characterization of Poly (Tripropylene Glycol Di-Acrylate)/Liquid Crystal Composite Materials Prepared by Polymerization Induced Phase Separation2
Exploring the Structural, Optical and Dielectric Behaviors of Poly(Methyl Methacrylate)/Multiwalled Carbon Nanotubes/MnFe 2 O 4 -Z2
Dyeing Behavior and Multi-Functionalities of Polylactide/Poly (Ethylene Terephthalate) Conjugate Fibers Produced by High-Speed Melt-Spinning2
Effects of Heterogeneous Linear Polyether Segments on the Membrane Breathability of Nonionic Polyurethane2
0.02190113067627