Journal of Macromolecular Science Part B-Physics

Papers
(The median citation count of Journal of Macromolecular Science Part B-Physics is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-11-01 to 2024-11-01.)
ArticleCitations
Artificial Neural Network Modeling of the Water Absorption Behavior of Plantain Peel and Bamboo Fibers Reinforced Polystyrene Composites32
Experimental Analysis and Optimization of Mechanical and Physical Properties of Light-Weight Bulk Molding Compound by Design of Experiment17
Thermal, Optical, and Color Modification in Makrofol VLG 7-1 Nuclear Track Detector Due to Gamma Irradiation15
Compositional Influence of Synthesized Magnetic Nanoparticles on Epoxy Composites: Dielectric, Magnetic, and Optical Characteristics13
Random Forest Regression Analysis for Estimating Dielectric Properties in Epoxy Composites Doped with Hybrid Nano Fillers10
Polyvinyl Butyral with Different Acetalization Degrees: Synthesis and Solubility Parameters10
Surface Hydrophilic Modification of Polypropylene Fibers and Their Application in Fiber-Reinforced Cement-Based Materials10
Broadband Radio Frequency Dielectric Permittivity and Electrical Conductivity of Dispersed Tin Oxide and Silica Nanoparticles in Poly(Ethylene Oxide)/Poly(Methyl Methacrylate) Blend Matrix-Based Nanoc10
Effect on the Viscometric Properties of Sodium Carboxymethylcellulose in a Dimethylacetamide and Acetone Mixture9
Synthesis and Application of Covalently Grafted Magnetic Graphene Oxide Carboxymethyl Cellulose Nanocomposite for the Removal of Atrazine From an Aqueous Phase9
In-vitro Degradation Behaviors of Poly(L-lactide-co-glycolide-co-ε-caprolactone) Microspheres9
Empirical Determination of Pressure-Volume-Temperature-Entropy Equation of State of Polyethylene in Isothermal, Isobaric and Isochoric Ensembles9
Optimization and Characterization of Polyurethane Electro-Spun Nano-Membranes Used for the Surfaces of Sound Absorbent Multi-Layer Sheets8
A Thermal Conductive Epoxy Composite based on Spherical MgO Particles and Boron Nitride Sheets8
Influence of Polyaniline on the Structural, Linear/Nonlinear Optical, and Dielectric Characteristics of Poly(Vinyl Chloride/Poly (Ethylene Oxide) Blends8
Preparation and Properties of BN/Si3N4/Epoxy Composites8
Antibacterial Activity of AgNO3Incorporated Polyacrylonitrile/Polyvinylidene Fluoride (PAN/PVDF) Electrospun Nanofibrous Membranes and Their Air Permeability Properties7
Polyacrylonitrile (PAN)/Polyvinyl Alcohol (PVA) Electrospun Nanofibrous Membranes Synthesis, Characterizations, and their Air Permeability Properties7
Phase Structure Analysis and Composition Optimization of Poly(Lactic Acid)/Poly(Butylene Adipate-co-terephthalate) Blends7
Preparation and Properties of Poly(D,L-lactide-co-glycolide-co-ε-caprolactone)/1,4-Butanediamine Modified Poly(lactide-co-glycolide) Blend Porous Microspheres7
Interrelation Between Ionic Conduction and Ions Fraction of Biopolymer Electrolytes Based on Alginate Doped With NH4Cl6
Anti-Bacterial Activity of Chitosan-Alginate-Poly (Vinyl Alcohol) Hydrogel Containing Entrapped Peppermint Essential Oil6
Preparation of Poly(Acrylic Acid) Grafted Reduced Graphene Oxide/Polyacrylamide Composite Hydrogels with Good Electronic and Mechanical Properties by in-situ Polymerization6
Optical and Color Investigation of the Effect of Laser Radiation on Polyaniline/Polyvinyl Pyrrolidone/Zinc Sulfide Nanocomposite Films6
Preparation and Characterization of Poly(l-lactide-co-glycolide-co-ε-caprolactone) Porous Microspheres6
A Facile Method for Selection of Solvents for Fabrication of Polypropylene Membranes by Thermally Induced Phase Separation6
Effects of Chitosan and Nano Titanium Dioxide on the Mechanical, Physicochemical and Antibacterial Properties of Corn Starch Films6
Empirical Determination of the Pressure–Volume– Temperature–Entropy Equation of State of Polyethylene in Isothermal, Isobaric and Isochoric Ensembles: II. Correlation Between the Equations of State in6
Empirical Determination of the Partition Function of Polyethylene Based on Its Pressure-Volume-Temperature-Entropy Isochoric Equation of State6
Remediation of Vanadium (V) and Chromium (III) Ions from Aqueous Media by Modified Nanocellulose Obtained from Coconut Coir6
XGBoost Regression Analysis of Dielectric Properties of Epoxy Resin with Inorganic Hybrid Nanofillers6
Nanocomposite Membranes Based on Imidazole-Functionalized Chitin Nanowhiskers for Direct Methanol Fuel Cell Applications6
The Tribological Properties of Polyimide/Polyamide Imide/Epoxy Coating Filled by WS 2 and ZnO Under Dry, Water, and Sediment Conditions5
Tribological Behavior and Thermal Stability of Thermoplastic Polyimide/Poly (Ether Ether Ketone) Blends at Elevated Temperature5
Empirical Determination of the Internal Energy of Polyethylene based on the Pressure-Volume-Temperature-Entropy Equation of State5
Adsorptive Removal of Methylene Blue Dye from Aqueous Solutions by Polyvinyl Alcohol/Activated Carbon Nanocomposite Hydrogels5
Characterization, Antistatic Treatment and Spinnability of Bio-based Polyamide 5,6 Staple Fibers5
Effect of a Novel Graphene on the Flame Retardancy and Thermal Degradation Behavior of Epoxy Resin5
Largely Improved Mechanical Properties of Polyurethane Nanocomposites via In Situ Polymerization with Low Loading of Graphene Oxide5
Characterization of β-Cyclodextrin Hybridized Diatomite as Potential Delivery Systems of Oxaliplatin and 5-Fluorouracil Drugs; Equilibrium Modeling of Loading and Release Kinetics5
Synergistic Effects of Multi-Wall Carbon Nanotubes and Polycaprolactone on the Thermal and Mechanical Properties of Polylactic Acid5
Polyvinyl Butyral/SiO2 Nanoparticles Composite Coating on Poly(vinylidene fluoride) Separators for Lithium-Ion Batteries5
Recrystallization Behavior and Mechanical, and Carbonizing Properties of Feather Keratin Resin Sheets Produced by Hot-Compression Molding5
Fire Retardancy and Thermogravimetric Kinetics of Thiol-Ene Degradation as Affected by Added 9,10-Dihydro-9-Oxa-10-Phosphaphenanthrene-10-Oxide (DOPO)5
Optimization of Key Parameters Affecting Swelling Capacity of Poly(acrylamide-co-acrylic acid) Hydrogels in Salt Water Using Response Surface Methodology (RSM)4
Performance of SiO2 Filled Functional Polypropylene Substrates for 5th Generation Communication4
Effect of Nano Quaternary Ni 1-x Zn x Fe 2-2x Mn 2x O 4
Semi-Crystalline Polyaniline with an Enhanced Conductivity Synthesized with a Novel Binary Dopant Sulfonic Acid-Surfactant: Mechanical, Electrical and Shielding Performances of Nylon/PANI Conductive F4
Crystallization, Phase and Mechanical Behaviors of Linear Low Density Polyethylene/Thermoplastic Polyolefin Elastomer Blends4
Synergistic Effects of Thermal and Near-Infrared Radiation Heating on the Self-Healing Effect of Shape Memory Polyethylene Elastomer Nanocomposites4
Preparation and Mechanical, Thermal and Oil-resistance Properties of Acrylic Rubber Nanocomposites Reinforced with Cellulose Nanocrystals4
Functionalization of Graphene Oxide with Polysilicone: Synthesis, Characterization and Fire Retardancy in Thiol-Ene Systems4
Preparation and Properties of Sodium Alginate/Silk Fibroin Microcarriers4
Crosslinked Low-Density Polyethylene/Polyhedral Oligomeric Silsesquioxanes Composites: Effects of Crosslinker Concentration on the Mechanical, Thermal, Rheological, and Shape Memory Properties4
Interaction Between 7-Ethyl-10-Hydroxycamptothecin and β-Lactoglobulin Based on Molecular Docking and Molecular Dynamics Simulations4
Manufacturing of Starch Nanocrystals Graft Polycaprolactone Catalyzed by Natural Clay: Synthesis, Characterizations, and Thermal and Antioxidant Properties4
Effect of Organoclay on the Rheology, Morphology, Thermal and Mechanical Properties of Nanocomposite Fibers Based on Polypropylene/Poly(Trimethylene Terephthalate)/Organoclay4
Kinetic Study of the Effect of the Micellar Concentration of Sodium Dodecyl Sulfate on the Spectroscopic, Morphological and Electrical Characteristics of a Polyaniline Prepared by a Hybrid Micro-Nanoe4
Empirical Determination of the Isoenthalpic and Isoentropic Equations of State of Polyethylene Based on the Pressure–Volume–Temperature–Entropy Equation of State3
Ultrahigh Low-Temperature Toughness of Polypropylene Composites with Low Ductile-Brittle Transition Temperature by Introducing Traces of Needlelike Wollastonite3
Study on Preparation and Performance of Reactive Polyurethane Hot Melt Adhesives Based on a Polycarbonate Diol and a Polyester Diol3
Effect of Tetrapropylammonium Iodide Doping Amounts on the Structural, Electric and Optical Characteristics of the PVA/PVP3
Fire Retardancy and Thermal Degradation Kinetics of Epoxy Composites Containing Polyaminopropylphenylsilsesquioxane3
Preparation and Biocompatibility Characterization of Regenerated Silk Fibroin Films3
Optical Transmission and Color Investigation of the Effect of Gamma Radiation on Polyvinyl Alcohol/Polyethylene Glycol/Polyvinyl Pyrrolidone Blend Films3
Optical and Color Properties of Gamma Irradiated Polyvinyl Alcohol - Sodium lignosulfonate-Cadmium sulfide Nanocomposite Films3
Exploring the Structural, Optical and Dielectric Behaviors of Poly(Methyl Methacrylate)/Multiwalled Carbon Nanotubes/MnFe 2 O 4 -Z3
The Influence of Polybutadiene-g-(Styrene-Acrylonitrile) Concentration on the Mechanical Properties and Flow Behavior of Acrylonitrile-Butadiene-Styrene Resin3
A Study on the Physical Properties of Polycarbonate/Acrylonitrile-Butadiene-Styrene Blends with Various Thermal Stabilizers to Secure the Safety of Automobile Passengers3
Anomalous Phase Transition, Polarization Switching, and Relaxation in a Novel Composite Consisting of Dimethylammonium Aluminum Sulfate Hexahydrate and Oxidized Multiwalled Carbon Nanotubes3
Effect of Reactive Extrusion Process Parameters on Thermal, Mechanical, and Physical Properties of Recycled Polyamide-6: Comparison of Two Novel Chain Extenders3
Preparation and Properties of Composite Hydrogels Based on Microgels Containing Chitosan3
Synergistic Action of Polyethylene Glycol/Expanded Graphite/Cellulose Nanofibers With Superior Infrared Stealth Performance3
Improvement in Thermal Conductivity of Through-Plane Aligned Graphite Flake/Silicone Modified Epoxy Resin Composites3
The Influence of Processing Conditions on the Mechanical Properties of Poly(Acrylonitrile-Butadiene-Styrene)/ Poly(Methyl Methacrylate) (ABS/PMMA) Blends3
Influence of the Matrix Molecular Weight on the Morphology and Properties of Poly(Ethylene Terephthalate)/Poly(Ethylene-Octene) Blends3
Preparation and Adsorption Performance of Cellulose Acetate Fiber-Chitosan/Titanium Dioxide Surface Layers Composite Membranes Prepared Based on a Sol-Gel Method3
Structural, Optical and Acoustical Characterization of Polyvinyl Alcohol Dispersed Cadmium Selenide Nanocomposites3
Empirical Determination of the Pressure-Temperature Phase Diagram of Polyethylene Based on the Pressure-Volume-Temperature-Entropy Gibbs Free Energy Equation of State3
Synthesis, Characterization and Demulsification Performance of Polymethylamyldiallylammonium Chloride3
Fabrication and Characterization of Zwitterionic Coatings with Anti-oil and Anti-biofouling Activities3
Thermal Degradation, Kinetic Analysis and Char Formation in the Pyrolysis of Poly(melamine-co-phenolic resin) Copolymer3
Modification of Heterocyclic Para-Aramid Fibers with Chlorine Groups and the Interfacial Properties of the Fiber/Epoxy Composites3
Exploration of the Nucleation-Growth Effect of Cetyltrimethylammonium Bromide for High β-Poly(Vinylidene Fluoride) Crystallization3
Polymerization Mechanism and Kinetics of Preparation of Methacrylic Acid-Ethyl Acrylate Copolymer Emulsion Reverse Demulsifier3
Rheological, Mechanical, and Thermal Properties of Ultrahigh Molecular Weight Polypropylene/Low Molecular Weight Polypropylene Blends3
Design of Experiments for the Effect of pH, Storage Time and Zinc Oxide Content on the Antibacterial Properties of Low-Density Polyethylene (LDPE)/Zinc Oxide Nanocomposites3
Preparation and Properties of Temperature-Sensitive Silver-Loaded Antibacterial Sericin/poly (N-isopropylacrylamide) Hydrogel2
Crystallization Behavior of Bombyx mori Silkworm Fibroin in Liquid Silk in Static and Flow States: Influence of the Interactions of the Sericin Fractions with the Fibroin2
Pyrolysis Behavior, Pyrolysis Kinetics, Heat Transfer and Pyrolysis Simulation of Almandine/Boron Phenolic Resin Ceramizable Composites2
Polyvinylidene Fluoride (PVDF) Crystallization Kinetics in an Electric Field2
Thermal Stability, Flame Retardancy and Flame Retardant Mechanisms of Hollow Glass Microspheres/Montmorillonite/Epoxy Sheet Molding Compound Composites2
Zero Valent Iron Impregnated Sodium Alginate Grafted (Acrylamide-Co-Acrylic Acid) Adsorbents for the Removal of Methylene Blue in Aqueous Systems2
Empirical Determination of the Pressure-Volume-Temperature-Entropy Equation of State of Polyethylene in Isothermal, Isobaric and Isochoric Ensembles: III. Correlation Between the Three Dimensional Pla2
Synthesis and In Situ Gelation Behavior of Thermoresponsive Poly(N-isopropylacrylamide)/Chitosan Microgels2
Empirical Determination of the Internal Energy of Polyethylene Based on the Pressure-Volume-Temperature-Entropy Equation of State. II. The Revised Internal Energy Based on the Zero Kelvin Isotherm2
Thermal Properties of Olive Pomace Filled Linear Low Density Polyethylene Bio-Composites2
Empirical Determination of the Partition Function of Polyethylene Based on Its Pressure-Volume-Temperature-Entropy Isochoric Equation of State. II. The Pressure and Entropy Expressed by the Modified P2
Effects of Heterogeneous Linear Polyether Segments on the Membrane Breathability of Nonionic Polyurethane2
Poly(ionic liquid) Grafted MXene via Si-ATRP and its Polyurethane Composite Foam: Mechanical, Flame Retardant and Sensing Properties2
Controlled Release of Novel Volatile Corrosion Inhibitor (VCI) Nanoparticles Incorporated in Low Density Polyethylene (LDPE) Films for Steel Coverings: Correlation of Experimental Results with Molecul2
Empirical Determination of the Pressure-Volume-Temperature-Entropy Equation of State of Polyethylene in Isothermal, Isobaric and Isochoric Ensembles: IV. The Modified Intrinsic Equation of State for t2
Synthesis and Characterization of Electro-Optic Polyurethaneimide-Polyimide Copolymers2
Structure and Properties of Natural Dye-Sensitized Nano-TiO2 Photocatalytic Self-Cleaning Cotton Fabrics2
Optical, Structural, and Dielectric Characteristics of Flexible PVA/PEG/ZnMn 2 O 4 /CuCo 2 O 2
Investigating the Effect of Fixation Tension on the Thermal Analysis Process and Crystal Structure of Polyacrylonitrile (PAN) Fibers2
Reprocessing Post-Consumer Expanded Polystyrene: Mechanical and Thermal Properties of Lightweight Concrete Made With Postconsumer Expanded Polystyrene2
The Effect of 1T Phase Molybdenum Disulfide on the Tribological Performance of Polyethylene Glycol2
Effect of Phenolic Resin and Nano-Calcium Carbonate Particles on the Curing Kinetic of Epoxy Composites2
Gamma Ray-Induced Changes in Polyvinyl Alcohol/Carboxymethyl Cellulose/Cadmium Selenide Nanocomposite Films: Optical Analysis for Optoelectronic Devices2
Effect of Rosin Resin on the Properties of Natural Rubber/Polyester Layered Fibers2
Composite Polypropylene Fibers Modified with High Density Polyethylene and Graphene2
Adsorption Mechanism of Xanthan Gum Based Hydrogel Adsorbent for the Removal of Cationic Methylene Blue from Aqueous Solutions2
Fatigue and Tensile Properties of Aramid Fibers Measured by Single Fiber Mechanical Tests2
Hollow Glass Microspheres/Montmorillonite/Epoxy Sheet Molding Compound Composites With Low Density and Excellent Mechanical Properties2
The Effect of Type of Filler on Microphase Separation and Reinforcement in Polyurethane Based Composites2
A Dual-Phase Approach to Reveal the Presence and the Impact of the TLLTransition in Polymers Melts. Part I: Predicting the Existence of Boyer’s TLLTransition from the Vogel–Fulch2
Abrasion and Mixed Sliding–Rolling Properties of Polyisoprene-Based Tread Rubber2
Preparation and High-temperature Resistance of Phenolic Resin/Silicone Rubber Ceramifiable Composites2
Discussion on Factors Affecting Dyeing of Bio-based Polyamide 5,6 Fibers Compared with Polyamide 6,6 Fibers2
Miscibility of Poly(Methyl Methacrylate) and Poly(Vinylidene Fluoride) Examined by Thermally Stimulated Depolarization Current and Dielectric Relaxation Spectroscopy2
Investigation of AC Conductivity Scaling and Dielectric Relaxation Dynamics of Chitosan/Iron Complexes2
Role of Cu/ZnO Nanostructures Doping on the Optical Behavior of Polyvinyl Alcohol/Polyvinyl Pyrrolidone/Graphene Composites for Optoelectronic Applications2
A Dual-Phase Approach to Reveal the Presence and Impact of the TLLTransition in Polymer Melts. Part II. The Theoretical and Practical Relevance of the TLLExistence and Characteri2
Gamma-ray Induced Changes in the Optical Properties of Silver-polyaniline Nanocomposites2
Calcium Salt of L-Isoleucine-Phthalate: An α-Nucleating Agent That Enhances the Crystallization Behavior and Mechanical Properties of Isotactic Polypropylene2
In Situ Biomineralized Phosphorylated Poly(l-Glutamic Acid)/Sodium Alginate Injectable Hydrogels2
A pH-Sensitive Chitosan/Oxidized-Kappa-Carrageenan based Nano-Antibiotic for Sustained and Controlled Release of Amoxicillin2
Morphological Transition and Associated Conductivity Shift in Emeraldine Polyaniline: Unraveling the Urbach Tail Analysis2
The Tribological and Mechanical Properties of Polyimide/Polyamide Imide/Epoxy Resin, Polytetrafluoroethylene-ZrO 2 Coating on an Engine Bearing2
Non-isothermal Crystallization Kinetics Behavior of Pure Low-density Polyethylene and Low-density Polyethylene/Styrene-butadiene Rubber Thermoplastic Vulcanizates2
Preparation of Injectable Sodium Alginate/Platelet Rich Plasma Porous Microcarriers2
Manifestation of the Relationship Between Molecular Relaxation Processes and Vibrational Dynamics of Polymers at Terahertz Frequencies in Their IR Spectra2
Structural, Optical and Electrical Studies on Poly(methyl methacrylate) Polymer Loaded with CuCo 2 O 4 /CuS Mixtures2
Totally Bio-based Kenaf Fiber-Feather Resin Green Composite1
Effect of Laser Radiation on the Linear and Nonlinear Optical Characteristics of Polyvinyl Alcohol/Carboxymethyl Cellulose/Nickel Oxide Nanocomposite Films1
Relationship between the Deformation Processes Occurring in Rubbers and Their Molecular Structure1
Controlling Lengthscales in Water-Solvent Induced Self-Organized Dewetting of Thin Polystyrene Films by Modulating the Surface Properties of the Substrate1
Hydrophilic Coating With Anti-fogging and Anti-icing Properties1
Interactions between Diphenylamine with 2-Hydroxypropyl β-Cyclodextrin based on Spectral, Biological and Theoretical Investigations1
Fabrication of Sodium Alginate Porous Scaffolds for Heavy Metal Ion Removal from Aqueous Solution1
Effect of Organic Solvent on (EO)78(PO)30(EO)78F68 Tri-Block Copolymer: Viscosity and Dynamic Light Scattering Measurements1
Enhancing the Flowability of Crude Oil-Water Emulsions in Pipeline Transportation using Trigonella foenum-graecum Extract1
Preparation and Properties of Phenolic Epoxy Modified Silicone Resin1
Effect of Swelling and Deswelling on the Elasticity of Polyacrylonitrile Gels Prepared by Freezing and Thawing Techniques1
Facile Fabrication of Nylon66/Multi-Wall Carbon Nanotubes/Polyvinyl Alcohol Nanofiber Bundles for Use as Humidity Sensors1
Synthesis and Characterization of Paramomycin-loaded CoFe2O4/Polyethylene Glycol – Poly (Lactic-co-glycolic Acid) Core-Shell Spheres for Treatment of Cutaneous Leishmaniasis1
Empirical Determination of the Helmholtz Free Energy and the Gibbs Free Energy of Polyethylene Based on the Pressure–Volume–Temperature–Entropy Equation of State and the Partition Function1
Preparation and Properties of Acetylated Cellulose Nanocrystals/Poly(butylene succinate-co-butylene adipate) Composites1
Radiation Effect of Vacuum Ultraviolet on the Performance of Polyimide Films1
Effect of silver particles on the crystal structure and the mechanical, optical and antibacterial properties of various polypropylene based plastomers and elastomers1
The Effects of Partial Deacetylation on the Ultrasonic Mechanical Treatment to Prepare Chitin Nanofibrils1
High-Temperature Stability of Natural Rubber Composites at High Temperatures in Short Time Ranges and Its Effect on Mechanical Properties1
Artificial Neural Network Modeling for Basic Dye Adsorption onto Montmorillonite1
Exploring the Adsorption Performance of Gum Xanthan/Poly (Acrylic Acid-co-2-(Diethlyamino)ethyl Methacrylate) based Adsorbent Toward Cationic and Anionic Dyes1
Effect of Hot Pressing on the Optical, Thermal, and Dielectric Properties of Solution Cast Prepared Nanocomposite Films Based on a Poly(Vinylidene Fluoride-co-Hexafluoropropylene) and Poly(Ethylene Ox1
Effect of MoS 2 on Simple and Novel PEG/κ-Carrageenan Hydrogels for TNBC Cancer Drug Delivery1
Preparation of TiO2 Composite Photocatalysts and their Photocatalytic Performance1
Structure–Property Relationships of Epoxidized Natural Rubber Vulcanizates1
Physico-Chemical, Mechanical and Morphological Properties of Biodegradable Films Based on Arrowroot Starch and Poly(vinyl alcohol)1
Improving the Mechanical Properties of Conventional Glass Ionomer Cement Through Using 4-Pentenoic Acid Modified Polycarboxylic Acid (PCA)1
Acetaminophen Removal in Aqueous Solutions via Enhanced Fenton-Like Degradation by Copper-Nickel Based Layered Double Hydroxides1
Preparation of Sulfonated Polystyrene-Iron Composite Material and Study of Their Cationic and Anionic Dyes Adsorption Properties1
Synthesis and Characterization of Gelatin/Poly N-Isopropylacryl Amide Nanocomposite Hydrogels by Response Surface Methodology1
Dielectric Characterization and Machine Learning-Based Predictions in Polymer Composites with Mixed Nanoparticles1
Doping Na+ into Polyvinyl Alcohol: Methacrylic Acid-Ethyl Acrylate (PVA/MAA:EA) Polymer Blend Electrolytes; A Way to Improve the Blend’s Thermal, Structural, Optical and Electrical Properti1
Mechanical Properties of Carbon Fiber/Epoxy Composites Modified with Micro- and Nano-Sized Magnesium Oxide Particles1
Modification of the Optical and Dielectric Characteristics of PVA/CMC/NiMoO 4 /TMAI Blends by Adding Carbon Nanoparticles1
In-Vitro Degradation Behaviors and Biocompatibility of Sodium Alginate/Platelet-Rich Plasma-Sr 2+ Porous Microcarriers1
Direct Resinification of Konjac Glucomannan via Hot-Press Compression Molding1
CO2 Capture Improvement in Polyetherimide Membranes: Effect of Ionic Liquid on the Molecular Mobility1
Effects of Polystrene (PS) Molecular Weight and Metal Oxide (TiO2) Content of PS Latex/TiO2 Nanocomposites on Their Film Formation Behavior1
Preparation and Characterization of Poly(lactide-co-glycolide-co-ε-caprolactone)- 1,4-Butanediamine-Modified Poly(lactide-co-glycolide)/Nano-Biaoactive Glass-β-Tricalcium Phosphate Composite Scaffolds1
Preparation of a New Zwitterionic Sulfobetaine Methacrylate Based Superabsorbent Copolymer Hydrogel and Its Adsorption Behavior Toward Cationic and Anionic Dyes1
Polylactic Acid (PLA) Film with the Incorporation of Fruit Peel Waste: A Short Review1
Preparation and Evaluation of Epoxy Based Material for High Performance Electronic Packaging through the Surface Modification of Fillers1
Comparative Study of the Structural, Mechanical and Electrochemical Properties of Polyacrylonitrile (PAN)-Based Polypyrrole (PPy) and Polyvinylidene Fluoride (PVDF) Electrospun Nanofibers1
A facile and efficient solvothermal degradation route for carbon fiber reinforced epoxy resin composite waste1
Preparation of Poly(Vinyl Alcohol)-Poly[2-(4-Acetylphenoxy)-2-Oxoethyl-2-Methylacrylate]/Poly(Vinyl Alcohol)-Cellulose Composite Membranes and Their Use in Purification of Wastewater1
Surface Grafting of Magnetic Carbon Nanotubes and Their Vertical Alignment in PVDF Asymmetric Ultrafiltration Membranes for Fast Nanochannel Construction1
Rheological Properties Study of Polymer Dispersed Liquid Crystals Doped by SiO 2 Nanoparticles1
Effect of a Reactive-Type Flame Retardant on Thermal Stability of Thiol-ene Composites1
Structure and properties of thermoplastic/thermoset-blended phenolic fibers1
Effects of Aging in an Aqueous Solution of NaCl on Impact Strength and Structure of Bisphenol A Polycarbonate1
Tailoring the Optical Properties of Polyvinyl Alcohol/Carboxymethyl Cellulose/Polyvinyl Pyrrolidone Blend Films Using Laser Irradiation for Their Application in Optoelectronic Devices1
Structural Characterization and Properties of Deep Eutectic Solvents Plasticized Chitosan Films1
Free Energy of Adsorption of Methylene Blue on Polyvinyl Chloride Containing Iron Oxide Nanoparticles Coated with Poly[2-(dimethylamino)ethyl methacrylate]1
Preparation and Characterization of Antibacterial Polycarbonate (PC) Using High Thermal Resistant Quaternary Fluoroalkyl Phosphonium Salts as Antibacterial Agents1
Properties of Thermoplastic High-ortho Phenolic Epoxy Fibers1
Grafting on Polystyrene on Different Parts of the Molecule and Determination of Metal Uptake Thereby1
Influence of Congored on the Optical, Dielectric and Thermal Behavior of Polymethyl Methacrylate and Polyvinyl Chloride1
In-Vitro Degradation Behaviors of Composite Scaffolds Based on Poly(Lactide-co-Glycolide-co-ε-Caprolactone), 1,4-Butanediamine Modified Poly(Lactide-co-Glycolide) and Bioceramics1
Synthesis and Characterization of Novel Polymeric-Sepiolite Composite Resin for Effective Water Softening: Applications in Batch and Column Adsorption1
Non-Isothermal Glass and Melt Crystallization of Poly(3-hydroxybutyrate) Biopolymer: Kinetics and Mechanisms1
A computational Finite Element Study for Optimizing the Biomedical Strength of MWCNT Reinforced Polymer Nanocomposites1
Engineering Biodegradable Sodium Alginate Films with Dragon Fruit Peel Powder and MgO Nanoparticles1
Chitosan/Gelatin/Starch-Based Films Plasticized with Olive Oil and Aloe-Vera Extract as a Potential Wound Dressing1
Research Progress on the Preparation of Composite Materials by Resin Film Infusion (RFI)1
Environmentally Friendly Poly(Vinyl Alcohol)/Poly(Methyl Methacrylate) Materials with High-Performance by a Facile Fabrication Strategy1
Effect of SbCl 5 Doping on the Electrical and Optical Properties of Polyamide Nylon 6 Films1
Tailoring the Microstructural, Optical, and Magnetic Properties of MgFe2O4 Nanoparticles Capped Polyethylene Glycol Through a Bio-Inspired Method1
Fire-Retardant Synergy of Tris(1-Methoxy-2,2,6,6-Tetramethyl-4-Piperidinyl)Phosphite and Melamine Hydrobromide/Aluminum Diethylphosphinate in Polypropylene1
Solubilization of Phenol in Micelles of (Ethylene Oxide)78(Propylene Oxide)30(Ethylene Oxide)78 Pluronic F68 Tri-Block Copolymer in Aqueous Suspensions1
A Molecular Dynamics Simulation Study of Amine-Carboxyl Ionic Interactions and Their Distribution in a Polysiloxanes Network1
Study on Preparation and Performances of the Triphenylmethane-4,4′,4″-Triisocyanate (TTI)/Epoxidized Soybean Oil Polyol (ESOP) Adhesives Modified by Vegetable Oil Polyol1
Characterization of Bitter Cassava Starch from the Town of Loum in Cameroon for Potential Use in Thermoplastic Composites1
Graphene Nanoplatelet and Multiwalled Carbon Nanotube Doping Effect on the Structural and Physical Properties of PolyVinyl Alcohol Composites1
Exploring the Optical Behavior of Gamma Ray Irradiated Polycarbonate/Poly(Methyl Methacrylate)/Polyethylene Oxide Blend Films1
Preparation and Properties of Sodium Alginate/Gelatin Hydrogel-Microspheres1
High Temperature Flexural Strength, Microstructure, and Phase Evolution of Quartz Fiber/Boron Phenolic Resin Ceramizable Composite Modified with W and B 4 C1
Structural Characterization, Thermal Stability and Non-Isothermal Kinetic Analysis of Decomposition of Poly(methylmethacrylate) and Titanium Dioxide Nanocomposites1
Preparation and properties of Polyvinyl alcohol (PVA) composite films by incorporation of γ- aminopropyltriethoxysilane(APTES) modified mesoporous silica (SBA-15) as filler1
Study of the Diamagnetic Properties of Liquid Polydimethylsiloxane (PDMS) with the Moses Effect1
In-Situ Formation of Samarium Methacrylate Rare Earth Complex for Improvement of the Durable Sealing Resilience of Ethylene Propylene Diene Monomer Rubber as a Sealing Material1
Thermal Stability, Crystallization, and Melting Behaviours of Iodine Doped Semiconducting Polyethylene Terephthalate (PET) Thin Films1
Enhanced Flowability and Slurry Characteristics of Limestone-water Suspensions Through the Integration of Coarse Particles and a Natural Additive1
Empirical Determination of the Pressure-Volume-Temperature-Entropy Equation of State of Polyethylene in Isothermal, Isobaric and Isochoric Ensembles: V. The Internal Energy, Enthalpy, Helmholtz Free E1
Investigation of the Microstructure of PAN Precursor Fibers Obtained at Various Processing Stages1
0.10802793502808