Journal of Engineering Mathematics

Papers
(The median citation count of Journal of Engineering Mathematics is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-05-01 to 2026-05-01.)
ArticleCitations
Axisymmetric plumes due to fluid injection through a small source in a wet porous medium36
Assessment of stresses and strains accompanying the degradation of the surface layer composition of a coated cylindrical part under operating conditions23
Padé-type high-order absorbing boundary condition for a coupled hydrodynamic wave model with surface tension effect18
Effects of turbulence at the ingress into landfill gas wells16
Effectiveness of the stress solutions of 3-D V-notched/cracked structures by using extended boundary element method16
Bounded absorbing sets for compressible non-Newtonian fluids14
Viscous instabilities induced by an initially piecewise linear concentration profile with a discontinuity13
Surface energy minimizing configurations for axisymmetric microparticles13
Vibration behavior of perforated nanobeams resting on elastic foundations with small-scale effects12
Evaluation of exciting force and moment by a vertical floating cylinder in appearance of a coaxial cylindrical obstacle in two-layer fluid12
Static bending behavior of a two-curvature nanoshell resting on a viscoelastic substrate12
Cole–Hopf linearization of the thermocapillary Marangoni dynamics of a two-dimensional bubble with insoluble surfactant11
Gradient dynamics approach to reactive thin-film hydrodynamics11
A new Petrov–Galerkin immersed finite element method for elliptic interface problems with non-homogeneous jump conditions11
Non-steady pressure-driven flow of a Bingham fluid through a channel filled with a Darcy–Brinkman medium11
Geometrically nonlinear analysis of isotropic and functionally graded plates using a quadrilateral strain-based finite element10
Phase separation of a binary fluid mixture under external forcing10
Laser-induced thermal stresses in fiber-reinforced elastic structures with voids9
Droplet impact onto a porous substrate: a Wagner theory for early-stage spreading9
Translating and pulsating Green function with an ice cover9
Modeling doppler ultrasound blood flow signals in vessels with various stenosis degrees8
Response of SH waves in inhomogeneous functionally graded orthotropic layered structure with interfacial imperfections8
Approximate solution of plane problems about stress concentrations in elastic bodies with voids8
Airy stress function for proposed thermoelastic triangular elements8
Lagrange multiplier and variational equations in mechanics8
On the smallness conditions for a PEMFC single cell problem8
Stress tensor components and stress intensity in a conductive strip subjected to a quasi-steady electromagnetic field8
Semi-analytical framework for dynamic stress concentration in semi-elliptical notches of thin walled piezoelectric media under SH-wave excitation and KNN8
A unified framework for sponge-layer relaxation methods and damping operators for conservation laws: application to the piston problem of gas dynamics7
Well-posedness analysis and numerical simulation of a radiofrequency ablation model in a porous medium7
Implicit interpolation method for immersed boundary methods7
Analytical solutions for steady groundwater flow through aquifer folds and faults7
Analysis of dynamic stress concentration in three different types of poro-viscoelastic rock medium7
Asymptotic solution of electromagnetic heating of skin tissue with lateral heat conduction7
Multi-scale analysis of solute transport in hydrodynamic fluid flows through a porous channel with anisotropic permeability and boundary absorption7
The unbalanced rotating cylinder partially filled with fluid; multiple scales analysis of a forced Korteweg–de Vries–Burgers equation7
Hygrothermal vibration control of cross-ply magneto-viscoelastic beams resting on Kerr’s foundations7
Crustal deformation of the Earth due to vertical dip-slip faulting7
An open-source finite element framework for Saint-Venant torsion of heterogeneous beams with arbitrary cross-sections6
Stress boundary layers for the Phan-Thien–Tanner fluid at the static contact line in extrudate swell6
Effect of internal heat source on stability analysis of a highly permeable vertical porous channel filled with nanofluid6
The linear stability of plane Couette flow with a compliant boundary6
Water wave interaction with a circular arc shaped porous barrier submerged in a water of finite depth6
Variationally and numerically coupled water-wave and surf zone hydrodynamics6
Evaporation-driven tear film thinning and breakup in two space dimensions6
Model order reduction for the input–output behavior of a geothermal energy storage6
Deriving thin-film averaged equations using computer algebra6
Probabilistic model for cracking localization in reinforced fibrous concrete beams6
Convection in a rectangular enclosure with internally heated porous medium: impact of boundary conditions5
Analytical treatments of time-fractional seventh-order nonlinear equations via Elzaki transform5
Electromagnetic excitation of a solid oblate spheroid in a lossless medium by a low-frequency magnetic dipole5
Energetic analysis of spreading of impacting drops on cold surfaces5
Direct and inverse problems in 2D isotropic elasticity using Eshelby and Lippmann–Schwinger integral formulations5
Correction: Analysis of a mathematical model for multi-phase motion and local non-equilibrium heat transfer in a blast furnace5
Analysis of pipe flow of a Giesekus fluid including the effect of Newtonian solvent viscosity5
The effect of particle–substrate adsorption on the deposition of particles from a thin evaporating sessile droplet5
Analytical solution for stress and settlement of strip footings resting on orthotropic jointed rocks: a parametric study5
Droplet levitation over non-isothermal surface of evaporating liquid layer5
Perspective on the description of viscoelastic flows via continuum elastic dumbbell models5
Extended finite similitude and dimensional analysis for scaling5
Lubrication flow in grinding5
Dynamic interfacial mechanics due to transiently adsorbing ionic surfactants5
Elastodynamic Green’s functions of transversely isotropic n-layer half- and full-spaces subjected to a surface or buried time-harmonic annular loading and associated material degeneracy4
The influence of slip boundary effect on the propagation of shear horizontal guided waves in a fluid-saturated porous medium4
MHD mixed convective hybrid nanofluid flow through a wedge saturated in porous medium under the effect of inclined magnetic field and Newtonian heating4
Existence and uniqueness results for well-posed laminated composite shell models4
Dynamic analysis and optimal control of a fractional-order HCV model with antibody immune response4
An analytical approach for steady and dynamic thermal stress problems of a power cable joint4
On the stability of hexagonal patterns in Marangoni convection4
Effect of normal impact load on four collinear rigid strips in an orthotropic medium4
Correction to: A numerical study on non-Fourier heat conduction model of phase change problem with variable internal heat generation4
Analytic calculation of two-dimensional linear viscous gravity–capillary waves on deep water generated by a moving forcing at non-critical conditions: wave patterns and spatial decay rate4
Approximate boundary conditions for a Mindlin–Timoshenko plate surrounded by a thin layer4
3D Chinese lantern-type stability loss of a cylinder composed of functionally graded materials under axial compression4
Axisymmetric thermoviscous and thermal expansion flows for microfluidics4
Existence of entropy weak solutions for 1D non-local traffic models with space-discontinuous flux3
Size-dependent free vibration analysis of multidirectional functionally graded nanobeams via a nonlocal strain gradient theory3
Generalised hydraulic rise over a rectangular disturbance in open channel flow3
Wave diffraction from the PEC finite wedge3
Transient sloshing in a prolate spheroidal container under aerospace excitations3
Scattering of plane SH waves by a concentric semi-cylindrical discontinuity and canyon3
Measurement model and accuracy analysis of parabolic ballistic projectile flight parameters based on random matrix3
Statistical inference of inverted Nadarajah–Haghighi distribution under type-II generalized hybrid censoring competing risks data3
Interfacial phase-change and geometry modify nanoscale pattern formation in irradiated thin films3
Nonlinear Rayleigh–Taylor instability in an accelerated soap film3
A computational framework for nonlinear multiphase flow in porous media using a meshfree method: numerical experiments and applications3
Stability analysis of helical soap films for the Plateau problem confined to a cylindrical tube3
A parametric study of the pipeline hammer phenomenon in plastic Bingham slurry flows using the finite element method3
Magnetohydrodynamic instability of fluid flow in a bidisperse porous medium3
Brattkus–Davis modes in the solution to the linear stability of plane stagnation-point flow3
Sixth-order parabolic equation on an interval: Eigenfunction expansion, Green’s function, and intermediate asymptotics for a finite thin film with elastic resistance3
A mathematical investigation of the influence of physical parameters on local surface heat flux of thin films3
Dynamic response of an isosceles trapezoidal railway embankment to an SH wave in a semispace anisotropic soil medium3
When buckling gets local: edge instabilities and modulated patterns3
A robust scheme for reduction of higher fractional-order systems2
The identification of obstacles immersed in a steady incompressible viscous fluid2
Evaluation of stress singularity orders and stress intensity factors for a circumferential V-notch in a round bar2
Nanoparticle uptake by a semi-permeable, spherical cell from an external planar diffusive field. III. Analysis of seeded plate experiments2
Extraction of density-layered fluid from a porous medium2
Structure-coupled gravity wave interaction with a submerged flexible porous barrier in deep water2
Steering a Thermocapillary Droplet Motion in Combined Couette–Poiseuille Flow2
Optimal control of higher-order Hilfer fractional non-instantaneous impulsive stochastic integro-differential systems2
Mixed-mode fracture behavior of FG orthotropic strip with multiple cracks subject to impact loads2
Nonstandard finite difference schemes for linear and non-linear Fokker–Planck equations2
Deformation of an elastic layer overlying smooth rigid base due to dip-slip fault2
Bounding pandemic spread by heat spread2
Analytical numerical and asymptotic solutions of MHD thermal boundary layer flow of Casson fluid over a permeable moving wedge2
Development of analytical and FEM solutions for static and dynamic analysis of smart piezoelectric laminated composite plates on elastic foundation2
Vertically integrated unconfined groundwater flow on sloping base2
Half-plane diffraction problems on a triangular lattice2
New mathematical methods for convection stability in bidisperse porous media with solute variations2
Buckling phenomenon of vertical beam/column of variable density carrying a top mass2
Hydrodynamic of surge radiation by a floating cylinder in the presence of bottom-mounted cylindrical obstacle in a two-layer fluid system2
New measurement method for the tensile strength of cement sheath2
Dynamic stress analysis of circular cavity in density inhomogeneous multi-layer soil structures containing a canyon2
A kernel-free boundary integral method for elliptic PDEs on a doubly connected domain2
A Nusselt number correlation for a superhydrophobic solid sphere encapsulated in a perfect plastron2
Effects of cake formation on flow and transport in a pleated membrane filter2
On the energy decay of a nonlinear time-fractional Euler–Bernoulli beam problem including time-delay: theoretical treatment and numerical solution techniques2
Buckling analysis of functionally graded plates subjected to combined in-plane loads2
A generalized approach to solving the mixed boundary value problem governing self-diffusiophoresis2
Concentration of mass in the vanishing adiabatic exponent limit of Aw–Rascle traffic model with relaxation2
Mechanical stresses in pouch cells: a reduced-order model2
Correction to: Similarity solutions for magnetogasdynamic shock waves in a rotating ideal gas using the Lie group-theoretic method2
An explicit construction of optimized interpolation points on the 4-simplex2
The behaviour of a flow from an elevated source into a less dense fluid2
Hopf bifurcation for a fractional van der Pol oscillator and applications to aerodynamics: implications in flutter2
A calculation method of splitting factor for volume coordinate generalized mixed elements2
Modelling, simulation and optimisation of seawater reverse osmosis – pressure-retarded osmosis (SWRO–PRO) hybrid units for seawater desalination1
Linear stability analysis of a rotating dielectric fluid layer under time-periodic electric field modulation1
Nonlinear analytical solution of a slender reinforced concrete element under axial tension1
A droplet in a ferrofluid droplet under a rotating magnetic field1
Multi-pulse jumping orbits and chaos of a fluid-conveying functionally graded cylindrical shell under piezoelectric and parametric excitations1
Influence of asymptotically-limiting micromechanical properties on the effective behaviour of fibre-supported composite materials1
A second-order-accurate approximation for the shape of a sessile droplet deformed by gravity1
Modelling the reduction of quartz in a quartz–carbon pellet1
Utilizing an imaginative approach to examine a fractional Newell–Whitehead–Segel equation based on the Mohand HPA1
Existence and uniqueness results for a nonlinear Budiansky-Sanders shell model1
Film evolution of a spherical soap bubble1
Non-axisymmetric stationary waves in a viscoelastic three-layered cylindrical shell1
Impact of interfacial imperfections and initial stress on the reflection and transmission of shear horizontal waves in a transversely isotropic model1
Mathematical modelling of laser-instigated magneto-thermo-mechanical interactions inside half-space1
Optimal system of Lie sub-algebras and numerical solution for shock wave in rotating non-ideal dusty gas with monochromatic radiation1
Dynamic sloshing in a rectangular vessel with porous baffles1
Stabilizing an adverse density difference in the presence of phase change1
Simple thermodynamic model of thermostats for a liquid into a tank: an analytical approach1
Numerical validation of analytical formulas for channel flows over liquid-infused surfaces1
Exact solution of the Graetz–Brinkman problem extended to non-Newtonian nanofluids flow in elliptical microchannels1
Numerical identification of the fractal orders in the generalized nonlocal elastic model1
A radial integration displacement discontinuity method with discontinuous isoparametric elements for 3D fracture simulations1
An annular crack in an elastic layer undergoing a torsion by an annular rigid disc1
Mathematical modeling of mitigation of carbon dioxide emissions by controlling the population pressure1
Spreading of rotating liquid annular ring with hysteresis effects1
An enhanced flux continuity three-dimensional finite element method for heterogeneous and anisotropic diffusion problems on general meshes1
On the lifetimes of two-dimensional droplets on smooth wetting patterns1
On the positive self-similar solutions of the boundary-layer wedge flow problem of a power-law fluid1
Effect of electromigration on onset of morphological instability of a nanowire1
Electromagnetohydrodynamic two-phase flow of immiscible electrolytes through an undulating hydrophobic microchannel1
Final epidemic size and optimal control of socio-economic multi-group influenza model1
Adaptive backstepping control for sensor-less haptic joysticks with uncertainty parameters1
Dynamics of a lipid-coated microbubble in a non-Newtonian liquid encapsulated by rigid confinement under dual frequency1
Effect of irregularity and inhomogeneity on Love wave propagation in sandwiched dry sandy media1
Analytic solution and numerical validation of the transient regime in dry surface grinding1
Stability analysis of a viscoelastic liquid in a channel flow with uniform wall suction/blowing1
Scattering of shallow asymmetric V-shaped canyon under cylindrical SH waves1
An inverse elastodynamic data reconstruction problem1
Analyses of aerodynamic forces on a three-dimensional pitching plate above surface waves1
Impulse response techniques for uncoupled identification of unknown groundwater transmissivity and storativity distributions1
Correction: An enhanced flux continuity three-dimensional finite element method for heterogeneous and anisotropic diffusion problems on general meshes1
Acceleration of a projected gradient algorithm for the Bingham flow problem by rigidity enforcement with penalty1
Adequate viscosity-induced porous boundary layer flow and heat transfer over a permeable wedge1
Buckling analysis of beams using higher-order theories and the Differential Transform Method1
Improved first-order shear deformation-based finite element approach for predicting free vibration frequencies of functionally graded sandwich doubly curved shallow shells1
On two initial-boundary-value problems for impact dynamics of metaconcrete rods1
Alternating minimization algorithm with a probability generating function-based distance measure1
Multi-objective optimization of the magnetic wiping process in dip-coating1
An alternative approach to inverse $$\mathcal {Z}$$-transform of rational functions1
0.29187393188477