Journal of Composite Materials

Article	Citations
Fabrication of biopolyethylene-based biocomposites with coffee ground waste: Effect of polyethylene-graft-maleic anhydride	115
Eco-friendly and multifunctional aluminum flake/carbon fiber/cellulose composite papers with electromagnetic interference shielding	68
Evaluating the mechanical behavior of carbon composites with varied ply-thicknesses using acoustic emission measurements	60
Structure-property relationships of 3D woven fabric composites: A critical review through bibliometric and content analyses	58
Understanding the role of bond point strain in the mechanical response of nonwoven polypropylene materials	47
Time-dependent damage development during creep in carbon woven-ply polyphenylene sulfide laminates above the glass transition temperature	45
Mapping internal strain fields of fused filament fabrication metal filled polylactic acid structure using digital volume correlation	43
Assembly of thermoplastic composites in the single strap joint configuration under bending	41
Effect of weaving parameters on fiber structure of 3D woven preforms: A Micro-CT investigation	40
Group effect and bearing capacity of multi-bolted connection for pultruded GFRP laminate	37
Development and application of nonwovens based on palm fiber as reinforcements of unsaturated polyester	34
UV protective bio-based epoxy/carbon quantum dots nanocomposite coatings: Synthesis and investigation of properties	32
Halloysite infused jute fiber/poly (3-hydroxy-butyrate-co-3-valerate) bionanocomposites: Thermal, mechanical and fire retardant properties	32
The compressive damage mechanism of carbon nanotube/carbon fiber reinforced composites under high strain-rate loading: Effect of reinforcement synergy	30
Novel ecological starch-based biocomposite films reinforced with acetate-intercalated layered double hydroxides: Enhanced optical, dielectric, and mechanical properties	30
Expression of concern: “Effect of friction and shear strength enhancement on delamination prediction”	30
Numerical simulations of the splitting tensile behaviour of needle-punched carbon/carbon composites	29
The evaluation of the relationship between the microstructure and properties of the tire tread containing carbon black/silica hybrid nanoparticles	29
Experimental and numerical investigations on the mode I delamination growth behavior of reinforced laminates via a ZPI (Z-pin pre-hole insertion) technique	29
Fabrication and characterization of copper and copper alloys reinforced with graphene	28
Production and an advanced model for electrical conductivity of silicone rubber/carbon nanotube nanocomposites as outdoor insulator housing material	28
Experimental and numerical study of the mechanical response and progressive failure of Hexel IM2-12K/Epocast 50-A1 composite	28
Numerical modeling and experimental validation of low velocity impact of woven GFRP/CFRP composites	28
Unveiling pressing effects in FDMSP metal–composite parts using in-situ µCT testing	26
Preparation and assessment of nanocomposites based on natural rubber latex reinforced with multiwall carbon nanotubes for Gamma rays shielding applications	26

Cohesive zone phase field model for electromechanical fracture in multiphase piezoelectric composites	25
Effect of interference installation method on interfacial properties and fatigue failure behavior of bolted composite joints	25
Skin thickness effects on failure mechanisms in foam infilled composite sandwich structures	25
Bioderived materials for stimuli-responsive, adaptive, and neuromorphic systems: A perspective	25
Effects of organically-modified montmorillonite and alkalinization on physical, mechanical, chemical, morphological, and thermal properties of wheat straw/recycled polypropylene nanocomposites	25
A multi-bandgap metamaterial with multi-frequency resonators	25
An experimental study on the flexural behaviour of symmetric and asymmetric marine composite sandwich beams	25
Residual mechanical performance of lightweight fiber-reinforced geopolymer mortar composites incorporating expanded clay after elevated temperatures	25
Synergistic effect of ultrasonically assisted exfoliated MWCNTs by ZrO2 nanoparticles on thermo-mechanical and anti-corrosive properties of epoxy nanocomposites	24
Viscoelastic and mechanical behavior of the thermoset composite interleaved with electrospun polybutadiene	24
Micro Computed Tomography based stochastic design and flow analysis of dry fiber preforms manufactured by automated fiber placement	24
Effect of Kaolin powder on the static and dynamic behavior of heterogeneous laminate constituted of functionally graded material layers	24
Investigation of physical, mechanical, and thermal properties of glass fiber reinforced polymer composites strengthened with KH550 and KH570 silane-coated silicon dioxide nanoparticles	23
A strain rate dependent and anisotropic failure material model for short fiber reinforced plastics based on energy density accounting for local fiber orientation	22
Wear behavior and wear mechanism of iron foam reinforced SiCp/A359 interpenetrating phases composites at high temperature	22
Two optimization problems for the auxeticity properties of anisotropic composite laminates	22
Compression-compression fatigue performances of hybrid unidirectional/woven carbon-fiber reinforced composite laminates after LVI	21
Nanocomposites of low-density polyethylene and nanocellulose: An alternative route using bleached cellulose nanofibers gel suspension	21
Post-consumer high density polyethylene/zirconium phosphate and aluminum hydroxide composites: Assessment of physico-mechanical and flame retardancy properties	21
Manufacturing of prestressed glass fiber reinforced polymer rebars and effect of fiber pretension on durability of rebars after conditioning in alkaline solution	20
Mechanical, morphological and electrical insulation properties of alkali-treated palm kernel shell particles reinforced polypropylene composite developed for industrial applications	20
Improving the damage tolerance of Si3N4 by forming laminate composites with refractory metals	20
Half-thickness z-pin effect on the interlaminar and the intralaminar properties of polyimide z-pin reinforced polymer composites	19
Automated tape laying path generation method of complex surfaces under multiple constraints	19
A parametric numerical study for the processing of highly reactive thermoset resins for liquid moulding applications	18
Experimental study of the interfacial micromechanics of multifunctional unidirectional carbon fiber reinforced polymer composite laminates with copper mesh	18
Thermomechanical vibration and stability of effectively homogenized FGM beam with temperature-dependent shear correction factors	18
Modeling of the creep behavior of epoxy/yerba-mate residue composites	18
Optimum formulation design of natural fiber-reinforced composites (NFRC) for automotive applications	17
Dynamic behaviour of flax fibre-reinforced polymer pipes subjected to harmonic excitation	17
Injection repair of CFRP using a multi-Wall carbon nanotubes-modified epoxy resin: Flexural and compression behavior	17
Synthesis of polymeric microcapsules filled with castor oil to enhance tribological properties in epoxy resin	17
Progressive failure analysis and taguchi-based optimisation of filament-wound composite tubes subjected to internal pressure using continuum damage mechanics approach	17
Mechanical properties of sandwich panels with corrugated carbon fiber cores	17
Environmental affected mechanical performance of additively manufactured carbon fiber–reinforced plastic composites	17
In situ compressive behavior of carbon fibers reinforced PolyEtherEther Ketone laminates exposed to one-sided heat flux	16
A hybrid additive manufacturing process for production of functional fiber-reinforced polymer composite structures	16
Comparative study on the evolution of process-induced residual stresses and deformations in thick and ultra-thick vacuum-infused laminates for wind turbine blades	16
Experimental investigation of buckling behavior of E-glass/epoxy laminated composite materials with multi-walled carbon nanotube under uniaxial compression load	16
Effects of carbon black on epoxidized natural rubber composites: Rheological, abrasion, and mechanical study	15
Development of coating removal From carbon fiber reinforced plastic skin surfaces by abrasive jet machining	15
Efficient strategies for reliability analysis and uncertainty quantification for filament-wound cylinders under internal pressure	15
Designing optimized geometry and fiber orientation of composites for dynamic tension via artificial intelligence	15
Uncertainty quantification in free vibration and aeroelastic response of variable angle tow laminated composite plate	15
Nanoclay role in improving compression after impact strength of the carbon/epoxy composites	15
Direct-write 3D printing of UV-curable composites with continuous carbon fiber	15
Compressive behavior of triaxially braided metal-CFRP hybrid lattice structures	15
On the strength of polymeric composites exposed to long-term Ultra-Violent radiation	15
Investigation of vibration characteristics of cracked aluminum plates repaired with carbon fiber composite patches	15
Effects of multiple post cure cycles on properties of composite carbon fibre and epoxy materials	15

Impact response of thermoplastic composites – Experiments and modeling	14
Effects of silver nanowires and their surface modification on electromagnetic interference, transport and mechanical properties of an aerospace grade epoxy	14
Thermal conductivity of crack-containing media: A numerical study	14
Progressive damage analysis for fatigue life prediction in plain weave composites: A multi-scale approach	14
Phenomenological model for predicting thermoelectromechanical response of 2-2 piezocomposite	14
Fibre failure assessment in carbon fibre reinforced polymers under tensile loading using in situ synchrotron X-ray computed tomography	14
Investigation of the hybridization effect on mechanical properties of natural fiber reinforced biosourced composites	14
Numerical lamb wave modeling and analysis for cure cycle shortening of carbon fiber composites	14
Effect of manufacturing conditions on the mechanical behaviour of short fibre reinforced PA6 parts manufactured with screw extrusion additive manufacturing	14
Experimental study on failure behaviour of stiffened composite panel under combined shear and compressive loading	14
Performance evaluation of foam-filled honeycomb panels with reinforcements using experimental testing and machine learning	14
A 3-D micromechanical framework to study damage propagation and failure of printed aligned discontinuous fiber-reinforced composites	13
Optimization of nozzle for pre-impregnated continuous fiber reinforced 3D printing	13
Void content classification for acceleration sensor embedded glass-fiber reinforced components made by resin transfer molding	13
Enhancement of the contact behavior of a quasi-isotropic carbon fiber/epoxy matrix laminate with an elastic body by modifying the fiber-matrix interphase using graphene nanoplatelets	13
An efficient micromechanics-based finite element model for failure analysis of laminated composites	13
Buckling analysis of perforated stiffened composite plates with interfacial debonding under hygrothermal and in-plane edge loadings	13
New jig adapted for compression fatigue tests on composite materials	13
Rate dependent compressive failure and delamination growth in multidirectional composite laminates	13
The effect of automated fiber placement process parameters on interlaminar shear strength of uncured prepreg bonded samples	13
A novel multi-stage concurrent topology optimization for variable-stiffness structures	13
Investigation of the microstructure, mechanical and wear performance of friction stir-processed AA6061-T6 plate reinforced with B4C particles surface composite	13
Autonomous material composite morphing wing	13
Dry sliding wear and viscoelastic performance of aluminum-based hybrid composites reinforced with SiC and metallic glass particles	13
Special Issue on Impact and Dynamic Response	13
Effects of wax and graphene concentrations on cutting force in drilling GFRP composites: A comprehensive study using a full factorial design of experiments	12
Tensile strength and anisotropy of repeated hot-rolled carbon nanotube/aluminum matrix composites	12
Effect of 0.5% CNT reinforcement of a glass fiber composite on strength and cyclic damage induced by transverse and out-of-plane compressive loads	12
Impact resistance of composite circular corrugated core sandwich structures	12
Experimental assessment of the stacking sequence/fiber angle combined effect on the energy absorption of GFRP composite structures	12
Bolt-bearing behavior of hybrid CFRP-steel laminates at low temperature	12
Investigation of combustion and mechanical properties of huntite-hydromagnesite and intumescent flame retardants in polypropylene composites	12
Experimental and numerical investigation of fracture characteristics in hybrid steel/composite and monolithic angle-ply laminates	12
Numerical analysis of the in-plane shear behavior of commingled fiber glass–polypropylene composite reinforcement using hypoelastic constitutive model	12
Tensile creep performance of unidirectional sisal/epoxy composites under different curing conditions	12
Tensile properties of thermoset composites based on yarn structures from recycled carbon fibre and low melting temperature Co-polyamide fibre	12
Torsion modulus to hollow glass microsphere additives in unsaturated polyester resin: Dynamic and deformation energy methods	12
Compressive testing of thermoset composites reinforced with high-performance polymer fibres	12
Prediction of creep failure life for unidirectional CFRP with heat-resistant epoxy resin as matrix exposed to high temperature under tension load	12
Investigation of shear thickening fluid (STF) impregnated interlayer hybrid composites under low-velocity impact loading	11
Development of the hardness, three-point bending, and wear behavior of self-lubricating Cu-5Gr/Al2O3-Cr3C2 hybrid composites	11
Analyzing photovoltaic module mechanics using composite plate theories and finite element solutions	11
Parametric process optimisation of automated fibre placement (AFP) based AS4/APC-2 composites for mode I and mode II fracture toughness	11
Enhancing the flexural capacity of reinforced concrete beams: A comprehensive review of inorganic composite solutions	11
Investigation of the spring-back phenomenon in two-dimensional bending of continuous glass fiber-reinforced polyamide composite sheets	11
High velocity impact response of corrugated core composite sandwich structures	11
Comparative study on 3D fused deposition modeling of PLA composites reinforced with flax, PALF, and hemp fibres	11
Efficient homogenization of honeycomb sandwich panels using orthotropic core simplification and Finite Element-based method: A comparative study	11
Three-stage channel sprays carbon nanotubes onto carbon fibers surface, preparing high performance carbon fibers composites	11
Predicting the fiber orientation of injection molded components and the geometry influence with neural networks	11
A multi-objective investigation of warpage and mechanical performance in FDM-printed thermoplastic composites	11
The mechanical behaviour of 3D carbon/carbon composites under biaxial tensile-compressive loading	11
Structural and nonlinear J-integral fracture toughness for nanoclay toughened ternary HDPE/LDPE-g-MA/ABS blend nanocomposites	11
Hybrid yarn structures as a promising approach for thermoplastic biocomposites	11
Effects of ring stiffeners on the underwater collapse behavior of carbon/epoxy composite tubes	11
Analysis and experimental evaluation framework for buckling and post-buckling of composite stiffened panels	11
Co-bonding of aerospace composite joints with reflowable adherend interfaces	10
Fiber reinforced polypropylene composites interfacial behavior improvement fabricated by cold plasma jet SiOx nanoparticles deposition	10
Optimisation of process-induced residual stresses in composite laminates by different genetic algorithm and finite element simulation coupling methods	10
Methods to increase the mechanical performance of composite adhesive joints: An overview with focus on joints with natural fibre composite adherends	10
Dynamic crushing of composite coupons: An experimental and numerical study	10
Investigation into high-speed impact response of composite sandwich structures	10
Effects of graphene, alumina, and their hybrid on dynamic mechanical behavior of epoxy-based nanocomposites	10
Comparative study of failure analysis in glass fiber reinforced laminated pin joints under cyclic and static loading conditions	10
Development of a flexible fiber-reinforced material with high protective performance for use in high-pressure water jet work	10
Estimation of the three-dimensional permeability tensor of engineering textiles using artificial neural networks	10
The chemical functionalization advantages of carbon nano heli-coil reinforcements for multifunctional polymeric nanocomposites	10
Effect of load, sliding frequency, and temperature on tribological properties of graphene nanoplatelets coated carbon fiber reinforced polymer composites	10
Characterization of the extruded polypropylene filled with cement kiln dust composite	9
Engineering the geometry of novel yarns for flexible, hybrid composites Part I: Multiple breaks	9
Experimental study on the effect of fiber length and weight ratio of sugarcane bagasse on the mechanical properties of sugarcane bagasse-glass fiber reinforced polyester composites	9
Secondary silane grafting on aramid fibers improves the interfacial bonding performance in textile composite materials	9
Electrical properties of melt-mixed polypropylene and as-grown carbon nanofiber composites: Analysis of their interphase via the AC conductivity modeling	9
The effect of ultra-low concentrations of aramid nanofibers on the structural and thermal characteristics of polylactic acid-based nanocomposites	9
Exploring pseudo-ductility in hybrid glass/carbon fiber veils laminates	9
An experimental study on the bearing strength of pin-loaded ceramic particles filled woven glass/epoxy composites	9
Damage monitoring in hybrid composites under projectile impact loading	9
Empirical modeling of force and temperature in drilling bone-simulating hybrid composites	9
Tensile properties and failure mechanism of the SiCf/SiC minicomposite with multi-layered (BN/SiC)n interfacial coatings at room temperature	9
Experimental investigations of the fire behavior of composites impacted by kerosene/air turbulent flame	9

Effect of loading frequency on the strain of MI-SiC/SiC composites	9
Fatigue performance investigation of perforated and bolted pultruded glass fiber reinforced polymer laminates based on experiment and digital images	9
Damage history in composite laminates: Matrix cracks leading to delaminations	9
Tension system design based on heated-mandrel winding process	9
Effect of pre-curing on thermoplastic-thermoset interphases	9
Jatobá wood flour: An alternative for the production of ecological and sustainable PCL biocomposites	9
Long-term sea water effect on the failure behaviour of adhesively strap joints	9
Expression of concern	9
Towards better understanding the stiffness of nanocomposites via parametric study of an analytical model modeling parameters and experiments	9
Additively manufacturing bioimitated multi-layered medical composite trauma plates	9
Evaluation of bending after impact and piezoresistive behavior of seawater aged glass fiber reinforced polymer composites containing hybrid carbon nanofillers	9
Numerical simulations of combined size effects acting on an open-hole laminated composite plate under tension	8
Experimental and numerical study on open-hole tension/compression properties of carbon-fiber-reinforced thermoplastic laminates	8
Multi-scale modeling and 3D printing of PLA composites reinforced with boron nitride, single-walled carbon nanotube, and graphene oxide	8
Study of the hygrothermal aging of a phenolic matrix and glass fiber composite	8
Effect of functional additives and natural fibers on the thermal and mechanical properties of compression-molded PLA biocomposites	8
Surrogate analytical models of damage localization in metal matrix composites	8
Spark plasma sintering of ZrO2 reinforced Ni-Cr alloy: Microstructure and mechanical behavior	8
The effect of imperfect bonding on stress distribution in fibrous composites	8
Mechanical characterization of granular actuators	8
Effect of low velocity impact at different temperatures on hybrid adhesives in aluminium-composite single lap joints	8
Metamaterial force-chain behavior of re-entrant honeycomb with improved mechanical properties	8
On the understanding and prediction of tribological properties of Al-TiO2 nanocomposites using artificial neural network	8
Improved hardness and wear resistance in B 4 C–SiC–TiC reinforced AA6061 composites produced by powder metallurgy: A comparative study of monolithic	8
Incorporation of carbon-based nanoparticles into epoxy adhesives: Enhancing mechanical properties through plasma functionalization and morphology analysis	8
Maleated nanolignin as a new coupling agent for wood-plastic composites	8
A general leading-order asymptotic theory of thin microstructural plates and uncertainty quantification of the elastic performance of composite laminates	8
A comparative study on the creep behaviour of ozone treated jute fabric/epoxy composites filled with ozonized and pulverized plant fibres	8
Characterization of carbon fibers recovered from 3D woven CFRPs via pyrolysis and solvolysis	8
Mechanical performance and failure analysis of a fabric subjected to ballistic impact using multi-scale numerical modelling	8
Superior wear resistance and friction stability in brake materials via triple-boron alloying	8
Enhancement of mechanical and structural properties of jute fabric-reinforced polyester composites via alkali treatment	8
Towards the development of a fire retardant sugar-cane bagasse ply for composite manufacture: A flammability study	8
Insights into the influence of microstructure on strength and damage progression in carbon/carbon composites	8
Fatigue strength of self-piercing riveted joints of carbon fiber reinforced composite and Al5052 alloy plates	8
Progressive damage analysis of laminated dovetail specimens and calibration for damage models based on Bayesian inversion	8
PAN-based fiber-reinforced carbon-carbon composites for improved fire retardancy and thermal and electrical conductivities for harsh environments	8
Comparison of off-axis angle on the low velocity impact behaviors for carbon-fiber-reinforced polymer laminates	8
Meshfree simulation of progressive damage in composite laminates using discrete element analysis	8
Effect of MWCNT and selective localization of MWCNTs on electrical conductivity of sPS/PET/graphite composites for a bipolar plate application	8
Novel tooling for direct melt impregnation of textile with variotherm injection moulding: Methodology and proof of concept	8
Investigation of the ballistic impact performance of B 4 C-added para-aramid/epoxy composites	8
An analytical investigation of self-temperature-compensated stretchable piezoresistive nanocomposites containing hybrid carbon black/carbon nanotube nanofillers	8
Wear and friction behavior of composite materials reinforced with carbon fiber and Kevlar	8
Probabilistic integrity assessment of filament wound CFRP pressure vessels	8
A novel post-processing method for progressive failure analysis of brittle composite compression	8
A resistor network model for analysis of current and temperature distribution in carbon fibre reinforced polymers during induction heating	8
Analysis of damage mechanisms in fiber-reinforced ceramic matrix composites under thermomechanical loading at intermediate and high temperatures	8
Expression of concern	8
Stacked generalization ensemble learning strategy for multivariate prediction of delamination and maximum thrust force in composite drilling	8
Optimization of low-velocity impact behavior of FML structures at different environmental temperatures using taguchi method and grey relational analysis	8
The effect of model dimensionality on compression strength of fiber reinforced composites	8
Assessment of the feasibility of vegetable-based polyurethane composites reinforced with long coconut fibers impregnated with clove oil via supercritical CO 2 for pr	8
Experimental investigation of the effective parameters and performance of different types of structural tools in drilling CFRP/AL alloy stacks	7
Investigation of the quasi-static crash response of circular glass-aramid hybrid composite tubes	7
High-strength magnesium composites reinforced with Sn–Ca and GNs–Y₂O₃ for automotive use	7
Comparative review of fiber treatments, processing, and tensile strength and modulus of hemp-polymer composites	7
Comparation of failure criterions for pin loaded composite plates under fatigue loads	7
Thermo-visco mechanical behavior of glass fiber reinforced thermoplastic composite	7
Mapping of cracking sequence of polyvinyl alcohol-steel hybrid fiber reinforced high-strength engineered cementitious composite under uniaxial tension	7
Research on NCF fabric CFRP pultrusion beam mechanical performance and laminate design for railway vehicle application	7
Structure, performance, and crystallization behavior of Turkey leonardite and raw kaolin added polylactic acid composite films	7
Achieving highly accurate cavity thickness measurements in fabric compaction	7
Comparison of FDMed and compression molded biocomposites in polylactic acid and food flour waste	7
Interface wear effects in ceramic composite crack opening	7
Enhancing mechanical properties and structural behavior of PLA/wood composites through annealing at 50°C and 100°C	7
Eco-friendly synthesis of a monomeric sizing agent and its effectiveness in carbon fiber reinforced poly (aryl ether ketone) composites	7
Fatigue and static damage in curved woven fabric carbon fiber reinforced polymer laminates	7
Consistent approach to onset theory	7
Investigating microstructural features of the carbon nanotube-aluminum hybrid active plate on diffusion induced stresses in the bilayer electrode with initial stretching	7
Effect of water on the mechanical and thermal properties of natural fibre reinforced hybrid composites	7
Drilling of natural fiber-reinforced based polyurethane foam composite	7
Investigation on thermal conduction of graphite film enhanced carbon fiber polymer composite by laser flash analysis	7
Numerical model of curved composite tiles under low-velocity impact loading	7
Piezoresistive response of carbon nanotube and carbon fiber/epoxy composites under cyclic loading	7
An experimental study of the behaviour of sandwich composite panels under low-speed loading	7
Surface grafting of Poly (ether ether ketone) on silica particles as novel filler for dental composites: Physico-chemical characterization	7
Retraction Notice	7
On the mechanical and mathematical properties of the stiffness and compliance coupling tensors of composite anisotropic laminates	7
Analysis of the fracture characteristic volume (FCV) for laminated composite structures with stress concentrations in compression	7
Physical analysis and statistical investigation of tensile and fatigue behaviors of glass fiber-reinforced polyester via novel fibers arrangement	7
Optimization design of variable stiffness composite cylinders based on non-uniform rational B-spline curve/surface	7
A study on energy dissipation of aramid composite reinforced with a new shear thickening gel (n-STG)/PVA polymer matrix	7
Preforming of non-crimp fabrics with distributed magnetic clamping and Bayesian optimisation	7
Study of the tensile mechanical properties and failure mechanisms of CFRP screwed joints	7
A multiphase flow approach to gas permeability of composite facesheets during Co-cure of honeycomb core sandwich structures	7
Multi-scale stochastic dynamic analysis of a damaged pretwisted composite strip	7
A hydrophobic coating on cellulose nanocrystals improves the mechanical properties of polyamide-6 nanocomposites	6
Enhancement of mechanical, physical, and electrical performances of epoxy composites by inclusion nano-particles: A review	6
Revolutionizing copper pipe durability: Shielding against corrosion with graphene oxide through electrophoretic application	6
Assessment of damping and flexural behaviour of hybrid fibre-particulate composites	6
Improving the impact resistance and damage tolerance of fibre reinforced composites: A review	6
A novel natural fiber from plane tree (Platanus orientalis L.) fruits to reinforce polypropylene composites	6
Determination of mechanical properties of nanocomposites reinforced with spherical silica nanoparticles using experiments, micromechanical model and finite elements method	6
Impact of Winkler-Pasternak foundation parameters on the buckling behavior of composite plates reinforced with FG-CNT in a parabolic distribution	6