OOIR: Observatory of International Research

Papers

(The H4-Index of Journal of Colloid and Interface Science is 109. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-05-01 to 2025-05-01.)

Article	Citations
Nano-architectonics of Pt single-atoms and differently-sized nanoparticles supported by manganese-oxide nanosheets and impact on catalytic and anti-biofilm activities	349
Designed formation of C/Fe3O4@Ni(OH)2 cathode with enhanced pseudocapacitance for asymmetric supercapacitors	226
Tunicate-inspired polyallylamine-based hydrogels for wet adhesion: A comparative study of catechol- and gallol-functionalities	218
Ultrasmall RuM (Mo, W, Cr) Decorated on Nitrogen-doped Carbon Nanosheet with Strong Metal-support Interactions for Electrocatalytic Hydrogen Generation in Wide pH Range	211
Multifunctional Two-Dimensional Bi2Se3 nanodisks as a Non-Inflammatory photothermal agent for glioma treatment	211
Nickel oxide/copper nanocluster anchored in carbon-nitride nanosheets realizing ultrahigh stability and broad potential range for zero-gap membrane flow reactor towards CO2-into-CO electroreduction	208
Outside Front Cover	206
Tuning the shell structure of peptide nanotubes with sodium tartrate: From monolayer to bilayer	198
Liquid-liquid phase separation of immiscible polymers at double emulsion interfaces for configurable microcapsules	195
Inside Back Cover	194
In-vitro evaluation of the evaporation retardation by Meibomian lipids in homogeneous and non-homogeneous evaporation	191
Inside Back Cover	187
Editorial Board	181
Assembly and recognition mechanisms of glycosylated PEGylated polyallylamine phosphate nanoparticles: A fluorescence correlation spectroscopy and small angle X-ray scattering study	180
Nanowire sulfide/carbon composite with high electrochemical performance in potassium-ion batteries	177
Doping and facet effects synergistically mediated interfacial reaction mechanism and selectivity in photocatalytic NO abatement	173
Outside Front Cover	169
Editorial Board	168
Colloidal dynamics of emulsion droplets in mouth	167
Stability, flow alignment and a phase transition of the lipidic cubic phase during continuous flow injection	165
Editorial Board	165
Specific locations of blue and green-emitting units in dual emissive carbon dots and their reversible emitting properties due to switchable inter-chromophoric interactions	164
Editorial Board	163
How do terminal modifications of short designed IIKK peptide amphiphiles affect their antifungal activity and biocompatibility?	162
Editorial Board	161

Filler dimensionality effect on the performance of paraffin-based phase change materials	161
Hollow urchin-like Mn3O4 microspheres as an advanced sulfur host for enabling Li-S batteries with high gravimetric energy density	160
“Mending with silk” enhances aged silk with mechanical and antibacterial properties	154
Accelerating charge separation in p-n heterojunction photocathode for photoelectrochemical oxygen reduction and evolution in photo-enhanced zinc-air battery	153
Insight into interfacial dynamics of photogenerated carriers in Cs3Bi2I9/Au heterostructure nanocomposites for high-sensitivity broadband photodetection with negative photoconductivity	152
Antibacterial cationic porous organic polymer coatings via an adsorption-contact-photodynamic inactivation strategy for treatment of drug-resistant bacteria	150
Boosting the reversibility of Zn anodes via synergistic cation–anion interface adsorption with addition of multifunctional potassium polyacrylate	149
Towards high performance room temperature sodium-sulfur batteries: Strategies to avoid shuttle effect	148
Defect suppression and photoresponsivity enhancement in methylammonium lead halide perovskites by CdSe/ZnS quantum dots	148
Plasma and magnetron sputtering constructed dual-functional polysulfides barrier separator for high-performance lithium-sulfur batteries	146
Strengthening perovskite interfaces with in-situ polymerized self-assembled monolayers	144
Energy band modulation of Li2O-rGO core–shell as cathode sacrificial additive enables capacity enhancement of hard carbon anode in Li-ion batteries	144
Dual-vacancies modulation of 1T/2H heterostructured MoS2-CdS nanoflowers via radiolytic radical chemistry for efficient photocatalytic H2 evolution	144
Dual-site and carbon-ring moiety modulation of polymeric carbon nitride for improved cooperative photocatalysis	142
Clusters induced electronic delocalization of single atom sites toward efficient electrocatalytic urea synthesis from CO2 and N2	142
Wetting behavior in the inertial phase of droplet impacts onto sub-millimeter microstructured surfaces	140
Detecting ion-specific forces between fatty acid colloids and salt crystals in brines using colloidal probe AFM	139
A novel empirical and rheometric assessment of viscoelastic hydrogel implant cohesiveness	138
Unveiling the reaction mechanism of photocatalytic H2 evolution coupled with selective bio-mass monosaccharide upgrading over single palladium atom-engineered carbon-rich graphitic carbon nitride	138
Outside Front Cover	136
Uncovering the performance of amorphous tungsten oxide electrodes within Zn-ion electrolytes toward stable aqueous electrochromic devices	136
Integrated Janus gel with bilayered heterostructure for high-performance supercapacitors	136
Superhydrophilic three-dimensional porous spent coffee ground reduced palladium nanoparticles for efficient catalytic reduction	135
Fluid interface calorimetry	133
Label-free tracking of whole-cell response on RGD functionalized surfaces to varied flow velocities generated by fluidic rotation	132
Porous Fe5Si3 intermetallic anode for the oxygen evolution reaction in acidic electrolytes	131
Stable EMT type zeolite/CsPbBr3 perovskite quantum dot nanocomposites for highly sensitive humidity sensors	131
Efficient carbon dioxide electroreduction over rationally designed heterogeneous Ag2S-Au nanocomposites	131
Efficient mitigation of lithium dendrite by two-dimensional A-type molecular sieve membrane for lithium metal battery	130
Petaloid bimetallic metal-organic frameworks derived ZnCo2O4/ZnO nanosheets enabled intermittent lithiophilic model for dendrite-free lithium metal anode	130
Nickel-catalyzed in situ synthesis of UHMWPE/TiO2 composites with enhanced mechanical properties and adjustable photocatalytic degradabilities	130
Novel reduced heteropolyacid nanoparticles for effective treatment of drug-induced liver injury by manipulating reactive oxygen and nitrogen species and inflammatory signals	128
Dual-doped medium-entropy phosphides for complete urea electrolysis	128
Dip coating of cylinders with Newtonian fluids	127
Precursor-film-driven ultra-early depinning of the three-phase contact line	127
Fabrication of optimal oxygen vacancy amount in P/Ag/Ag2O/Ag3PO4/TiO2 through a green photoreduction process for sustainable H2 evolution under solar light	127
Solvation of nonionic poly(ethylene oxide) surfactant Brij 35 in organic and aqueous-organic solvents	126
Nanocrystalline erdite from iron-rich sludge: Green synthesis, characterization and utilization as an efficient adsorbent of hexavalent chromium	126
Improving interfacial thermal transport in silicon-reinforced epoxy resin composites with self-assembled monolayers	125
Multifunctional molybdenum-tuning porous nickel-cobalt bimetallic phosphide nanoarrays for efficient water splitting and energy-saving hydrogen production	125
Crystal structure regulation of trititanium pentoxide for advanced zero-strain lithium storage anode	124
Impact of metallic coating on the retention of 225Ac and its daugthers within core–shell nanocarriers	124
Semimetallic state transition in Two-Dimensional carbon nitride covalent networks and enhanced electrocatalytic activity for nitrate to ammonia conversion	124
Dual-functional gold nanorods micro pattern guiding cell alignment and cellular microenvironment monitoring	124
Swiss roll nanoarrays for chiral plasmonic photocatalysis	123
Engineering dual-crystal configurations in perovskite oxides boosts electrocatalysis of lithium–oxygen batteries	123
FLIM nanoscopy resolves the structure and preferential adsorption in the co-nonsolvency of PNIPAM microgels in methanol-water	123
Nitrogen-doped carbon-coated Cu0 activates molecular oxygen for norfloxacin degradation over a wide pH range	123
Active microparticle propulsion pervasively powered by asymmetric AC field electrophoresis	122
Concerns and breakthroughs of combining ionic liquids with microwave irradiation for the synthesis of Ru nanoparticles via decarbonylation	122

Tumor associated antigens combined with carbon dots for inducing durable antitumor immunity	122
Computational screening of highly selective and active electrocatalytic nitrogen reduction on single-atom-embedded artificial holey SnN3 monolayers	122
Self-assembled Au-CQDs nanofluids with excellent solar absorption and medium–high temperature stability for solar energy harvesting	121
Facile decoration of fluorinated metal–organic frameworks on copper foil for regulated lithium deposition and robust solid electrolyte interface	121
Evaluating the Rheo-electric Performance of Aqueous Suspensions of Oxidized Carbon Black	120
Editorial Board	120
Nucleation and growth mechanisms of an electrodeposited Ni–Se–Cu coating on nickel foam	120
Highly stable cathodes for proton exchange membrane fuel cells: Novel carbon supported Au@PtNiAu concave octahedral core-shell nanocatalyst	119
Nanofibrous Ru/SnO2 heterostructure as robust bifunctional electrocatalyst for high-performance overall hydrazine splitting and Zn-hydrazine battery	119
Transitioning the production of lipidic mesophase-based delivery systems from lab-scale to robust industrial manufacturing following a risk-based quality by design approach augmented by artificial int	118
Ti3C2 MXene with pillared structure for hybrid magnesium-lithium batteries cathode material with long cycle life and high rate capability	117
Unravelling the anionic stability of an ether-based electrolyte with a hard carbon or metallic sodium anode for high-performance sodium-ion batteries	116
Outside Front Cover	116
The design of chemisorption and catalysis synergistic defender for efficient room temperature sodium-sulfur batteries	116
Porous ZrO2 encapsulated perovskite composite oxide for organic pollutants removal: Enhanced catalytic efficiency and suppressed metal leaching	115
A system of FRET dyes designed to assess the degree of nano-scale contact between surfaces for interfacial adhesion	115
Corrigendum to “Inhibition of alanine-serine-cysteine transporter 2-mediated auto-enhanced photodynamic cancer therapy of co-nanoassembly between V-9302 and photosensitizer” [J. Colloid Interface Sci.	115
Outside Front Cover	114
Inside Back Cover	114
Bioinspired nonwetting surfaces for corrosion inhibition over a range of temperature and corrosivity	113
High-temperature continuous hydrothermal post treatment derived g-C3N4 for enhanced photocatalytic H2 production	113
Yolk-shell ZnO@C-CeO2 ternary heterostructures with conductive N-doped carbon mediated electron transfer for highly efficient water splitting	112
Hierarchical ZIF-decorated nanoflower-covered 3-dimensional foam for enhanced catalytic reduction of nitrogen-containing contaminants	112
Amphiphilic nonionic block and gradient copoly(2-oxazoline)s based on 2-methyl-2-oxazoline and 2-phenyl-2-oxazoline as efficient stabilizers for the formulation of tailor-made emulsions	112
CoS2-TiO2@C Core-Shell fibers as cathode host material for High-Performance Lithium-Sulfur batteries	111
Assessing the Effect of Surface Coating on the Stability, Degradation, Toxicity and Cell Endocytosis/Exocytosis of Upconverting Nanoparticles	111
Simultaneous modification of dual-substitution with CeO2 coating boosting high performance sodium ion batteries	111
Small molecule induced interfacial defect healing to construct inverted perovskite solar cells with high fill factor and stability	111
Hierarchical Cu2O/NiFeCo layered double hydroxide nanoarrays on copper foam obtained by a self-sacrificial templated route for a highly efficient oxygen evolution reaction	111
C@MoS2 modified separator as efficient trapper and catalysis for promoting polysulfide conversion in Li-S battery	111
A fully 3D printed electronic skin with bionic high resolution and air permeable porous structure	110
Halloysite nanotubes modified poly(vinylidenefluoride-co-hexafluoropropylene)-based polymer-in-salt electrolyte to achieve high-performance Li metal batteries	110
Janus bimetallic materials as efficient electrocatalysts for hydrogen oxidation and evolution reactions	110
Facile one-step strategy for the formation of BiOIO3/[Bi6O6(OH)3](NO3)3·1.5H2O heterojunction to enhancing photocatalytic activity	109
Fabrication of monodisperse gold-copper nanocubes and AuCu-cuprous sulfide heterodimers by a step-wise polyol reduction	109
A slip-spring framework to study relaxation dynamics of entangled wormlike micelles with kinetic Monte Carlo algorithm	109
SnOx surface modified Sr2Fe1.5Mo0.5O6−δ cathode with enhanced electrocatalytic activities for direct CO2 electrolysis in solid oxide electrolysis cells	109
High-entropy Pt18Ni26Fe15Co14Cu27 nanocrystalline crystals in situ grown on reduced graphene oxide with excellent electromagnetic absorption properties	109
A novel differential display material: K3LuSi2O7: Tb3+/Bi3+ phosphor with thermal response, time resolution and luminescence color for optical anti-counterfeiting	109
Functional partitioning synergistically enhances multi-scenario nitrate reduction	109