Journal of Chemical Engineering of Japan

Papers
(The TQCC of Journal of Chemical Engineering of Japan is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-03-01 to 2024-03-01.)
ArticleCitations
Integrating Canonical Variate Analysis and Kernel Independent Component Analysis for Tennessee Eastman Process Monitoring13
Flame Propagation Characteristics of Deposited Coal Dust Explosion Driven by Airflow Carrying Coal Dust10
Studies of Phase Equilibria in Ternary KBr–SrBr<sub>2</sub>–H<sub>2</sub>O and NaBr–SrBr<sub>2</sub>–H<sub>2</sub>O Systems at 308 K9
Analysis of Endoscopic Injectability and Post-Ejection Dripping of Yield Stress Fluids: Laponite, Carbopol and Xanthan Gum8
Prediction of the Performance of Capture Chromatography Processes of Proteins and Its Application to the Repeated Cyclic Operation Optimization7
Canonical Variate Nonlinear Principal Component Analysis for Monitoring Nonlinear Dynamic Processes7
Effects of Porosity and Ni/Al Molar Ratio in Ni–Al Oxide Precursors on Porous Intermetallic Nickel Aluminide Nanopowders Prepared by Chemical Route7
Product Characteristics and Interaction Mechanism in Low-Rank Coal and Coking Coal Co-Pyrolysis Process7
Nanoparticle Separation through Deterministic Lateral Displacement Arrays in Poly(dimethylsiloxane)7
Removal of Phenol from Oil Mill Effluent Using Activated Carbon Prepared from Kernel Shell in Thailand’s Palm Industry7
Accelerated Method for Designing Flow-Through Chromatography of Proteins7
Thermal Conductivity for Polymer Composite Materials: Recent Advances in Polyimide Materials6
Sinter-Necked, Mixed Nanoparticles of Metallic Tungsten and Tungsten Oxide Produced in Fuel-Rich Methane/Air Tubular Flames6
Preparation of Polystyrene Microcapsules Containing Saline Water Droplets via Solvent Evaporation Method and Their Structural Distribution Analysis by Machine Learning6
Recovery of Phosphoric Acid and Calcium Phosphate from Dephosphorization Slag6
CO<sub>2</sub> Capture from a Simulated Dry Exhaust Gas by Internally Heated and Cooled Temperature Swing Adsorption6
Hydrodynamic and Mass Transfer Correlation in a Microbubble Aerated Stirred Tank Reactor5
A Novel Fault Detection Scheme Based on Difference in Independent Component for Reliable Process Monitoring: Application on the Semiconductor Manufacturing Processes5
Activity Enhancement of a Carbon Electrode Material for Vanadium Redox Flow Battery by Electron-Beam Irradiation5
Optimization of Flow-Through Chromatography of Proteins5
Arsenic Removal from Aqueous Solutions by Forward Osmosis5
Liquid–Liquid Extraction of Cd(II) and Zn(II) Using a Novel Tetraalkylphosphonium-Based Ionic Liquid5
Rheology and Stability of Magnetorheological Fluids Prepared with Three Types of Stabilizers4
Enhancement of the Catalytic Activity Associated with Carbon Deposition Formed on NiO/γ-Al<sub>2</sub>O<sub>3</sub> Catalysts during the Direct Dehydrogenation of Isobutane4
Integral Function to Optimize Mass Exchange Network Synthesis Model4
Dependence of Phosphorus Recovery on Acid Type during Dissolution–Precipitation Treatment of Incineration Ash of Chicken Manure4
Modeless Start-Up Control for Operational Flexibility of Combined Cycle Power Plants4
Numerical Analysis of Silica Coating Effect on Pt Cathode Catalyst in Polymer Electrolyte Fuel Cells4
Application of Hydrothermal Leaching Technology to Spent LIB Cathode Materials with Citric Acid Using Batch-type Device and Flow System4
Industrial Crystallization of Potassium Sulfate Using a Suspension Crystallizer: Inclusion of Mother Liquor and an Impurity Distribution Model4
Generation of Monodisperse Microbubbles with a Controlled Size of Less Than 10 µm at a Generation Rate on the Order of 10<sup>5</sup> Bubbles/s in Glass Capillary Microfluidic Devices4
Identifying Parameters from Discharging and Relaxation Curves of Lithium-Ion Batteries Using Porous Electrode Theory4
Synthesis of CaMg(CO<sub>3</sub>)<sub>2</sub> from Concentrated Brine by CO<sub>2</sub> Fine Bubble Injection and Conversion to Inorganic Phosphor4
Effect of Alkali Metal Addition to a Ru/CeO<sub>2</sub> Catalyst Prepared by NaBH<sub>4</sub> Reduction on the Catalytic Performance for H<sub>2</sub> Production vi4
Effect of Alumina Particles on Simultaneous Lipid Extraction and Biodiesel Production from Microalgae under Ultrasonic Irradiation4
Recent Advances in Carbon Dioxide Separation Membranes: A Review3
Enabling Metal Sustainability with Polymer Inclusion Membranes: A Critical Review3
Effect of Plastics on the Photodegradation Behavior of Chlorophenols3
Evaluation of Concentrated Seawater Discharge from the Salt Manufacturing Process for the Crystallization of CaMg(CO<sub>3</sub>)<sub>2</sub> Using the CO<sub>2</sub&g3
Integrated Evaluation of POME Treatment by Dielectric Barrier Discharge Based on Yield of H<sub>2</sub> and CH<sub>4</sub>, EEM and Removal of COD3
Numerical Optimization of Particle Dispersion in Wave Bioreactor for Static Cell Cultivation3
Effect of Heat-Treatment Temperature of Carbon Gels on Cathode Performance of Lithium-Air Batteries3
A GRU Network-Based Approach for Steam Drum Water Level Predictions3
Bayesian Optimization for Hydrodynamic Characterization of a Cylindrical Orbitally Shaken Bioreactor with a Bump at the Bottom3
Carbon Deposition Assisting the Enhancement of Catalytic Activity with Time-on-Stream in the Dehydrogenation of Isobutane over NiO/Al<sub>2</sub>O<sub>3</sub>3
A Numerical Study on the Exact Onset of Flow Instabilities in Thermo-Solutal Marangoni Convection Driven by Opposing Forces in a Half-Zone Liquid Bridge under Zero Gravity3
Arc Behavior and Temperature Distribution in Water Thermal Plasma with Mist Generation3
Development of Novel Positively Charged Nanofiltration Membranes Using Interfacial Polymerization, Followed by Plasma Graft Polymerization3
Hydrogen Production by Steam Reforming of Methane in Biogas Using Membrane Reactors with Dimethoxydimethylsilane-derived Silica Membranes Prepared by Chemical Vapor Deposition3
Syntheses of Layered Double Hydroxides from de-K Bittern and Their Anion Exchange Property3
Synthesis of SAPO-34 Membrane and Its Application to the Separation of Water/Acetic Acid Mixtures by Vapor Permeation3
Effect of Additives on the Rapid Destruction Process of Particle Aggregates in a Startup Shear Flow3
An Approach to Simulate Vapor Phase Reactions of Coal Volatiles in a Reducing Section of the Two Stage Entrained Flow Gasifier with a Detailed Chemical Kinetic Model2
Development of ZIF-8 Membranes for Propylene/Propane Separation by Direct Growth on a ZnO-Modified Support without Activation2
Detachment of Submicron Particles from Substrates Using the Suspension-Assisted Ultrasonic Method2
Physical-Principle Based Extended Attributes for Process Fault Detection2
A Numerical Study for the Growth of InGaSb Crystals with a Flatter Interface by Vertical Gradient Freezing under Normal Gravity and Utilizing Bayesian Optimization2
Sparse Principal Component Analysis Using Particle Swarm Optimization2
Design of Minimal Waste Process for Levulinic and Formic Acids Production from Glucose by Using Choline Chloride Added Aluminum Chloride Catalyst System2
Modeling Hydrogen Sulfide Removal Using Sodium Carbonate in Rotating Packed Beds: A Contribution Ratio Analysis2
Effect of Sn<sub>x</sub>Pt<sub>y</sub> Alloy Structures in SnPt Bimetallic Nanoparticle Catalysts on Catalytic Activity for Hydrogenation of Acetic Acid2
Reductive Adsorption of Chromium(VI) by Coal-Based Activated Carbon2
Adaptive Soft Sensor Modeling Method for Time-varying and Multi-Dimensional Chemical Processes2
Development of a Simple Correlation between the Mal Distribution Factor and Geometrical Parameters of the Two-Direction Vapor Horn Gas Distributor2
Development of Hydrogen Permselective Membranes for Propylene Production2
Estimation of the Just Suspension Speed of Mixed Particles in a Solid-Liquid Stirred Tank2
Combined Process to Recycle Scrap Tire Rubber and Degrade Dye Wastewater with Sub/Supercritical Water2
Supercritical Carbon Dioxide Extraction of a Biaryl from Model Product Solutions of a Flow Suzuki–Miyaura Coupling Reaction2
Numerical Investigation on Suspension Culture in an Orbitally Shaken Cylindrical Bioreactor2
Sorption of Antibiotics, Pharmaceuticals, and Personal Care Products in Water on Didodecyldimethylammonium Bromide-Montmorillonite Organoclay2
Additive Effect on Lithium Silicate Pellets for Thermochemical Energy Storage2
Acceleration of Bromine Oxyacid Generation and Organic Compound Decomposition by O<sub>3</sub> Fine Bubble Injection into an Aqueous Solution Containing Bromide Ions2
Fabricating and Evaluating the Sterilization Effect of Composite Coal-Tar Pitch-Based Spherical Activated Carbon (TiO<sub>2</sub>/CB/Coal-Tar-Pitch-SAC)2
Experiments on Pressure Distribution of a Low Specific-Speed Centrifugal Pump with Atypical Open Impeller2
Solid–Liquid Equilibria of KCl in Polyethylene Glycol 6000–H<sub>2</sub>O Mixed Solvent at 288.2, 298.2, and 308.2 K: Experiment and Correlation2
Hollow-Form LaNiO<sub>3</sub> Perovskite Catalyst for PM Combustion Using Carbon Fibers as a Template2
Green Leaching of Metallic Platinum Using an Ionic Liquid with Synergistic Organic Acid–Chlorinating Agent Additives2
Recovery of Rare Metals from Spent Denitrification Catalysts in Coal-Fired Power Plants2
Effect of Fluid Flow on Crystallization in a Segmented Flow Microchannel2
Convolutional Neural Networks for Multi-Stage Semiconductor Processes2
Partition of Amino Acids in Aqueous Two-Phase Systems Comprising Hydrophilic Organic Solvents and Salts2
Numerical Simulations of Seeded Batch Crystallization Demonstrating the Effect of Stochastic Nucleation on Crystal Product Quality2
Effect of pH on Hydrolysis of Biodegradable Polyethylene Terephthalate2
Evaluation of Reslurry Rate for Particle Design of Spherical Crystalline Agglomerates via Crystallization2
An Improved Non-negative Matrix Factorization Method for Dynamic Industrial Fault Diagnosis2
Anion Exchange Membrane Water Electrolyzers: An Overview2
Biodegradable Crosslinked Chitosan Gel Microbeads with Controlled Size, Prepared by Membrane Emulsification-External Gelation and Their Application as Reusable Adsorption Materials2
Study on a Recirculation Microreactor System for Gas–Liquid Reactions2
A Novel Fault Detection and Diagnosis Scheme Based on Independent Component Analysis-Statistical Characteristics: Application on the Tennessee Eastman Benchmark Process2
Solvothermal Carbonization of Wood Chips via the Dechlorination of PVC in Glycerol2
Proposal of Index for Reaction Improvement Using Structured Catalyst2
A Prototype Method for Selecting Interventions for Enhancing Medication Adherence in Medicine Taking Processes2
Mercury Forms Contained in Desulfurization Gypsums2
Enhancement of the Catalytic Activity Associated with Carbon Deposition Formed on NiO/Al<sub>2</sub>O<sub>3</sub> during the Dehydrogenation of Ethane and Propane2
Effect of Methane Injection Methods on the Preparation of Silicon Nanoparticles with Carbon Coating in Induction Thermal Plasma2
Using Stacked Auto-Encoder and Bi-Directional LSTM For Batch Process Quality Prediction2
Gas Absorption Enhancement of Slug Flow in the Presence of Non-Porous Silica Fine Particles2
0.042418956756592