OOIR: Observatory of International Research

Papers

(The TQCC of Journal of Applied Polymer Science is 6. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-08-01 to 2026-08-01.)

Article	Citations
	188
	160
Synthesis of a Phosphorus‐Based Polymer Antistatic Agent and the Impact on Polypropylene Properties	151
Cover Image, Volume 142, Issue 31	121
β‐CD and Succinonitrile Reinforced Polymer Electrolytes for All‐Solid‐State Lithium Metal Batteries	103
	101
Gypsum‐Based Self‐Leveling Mortars Modified With an Emulsified Waterproofing Agent: Physical and Mechanical Properties and Microstructure	83
Preparation of Polyacrylonitrile Brushes Using Microliter Volumes via Surface‐Initiated Photoinduced ATRP	78
Sustainable and biodegradable poly(butylene succinate‐co‐terephthalate)/poly(propylene carbonate) blown films with enhanced compatibility, mechanical, and barrier properties	69
Synthesis and Conformational Relationship of New Fluorinated Acrylate Polymer‐Based Internal Mold Release Agents	62
Shape Memory Polymers With High Response Temperature and Application in Wellbore Stability	61
Cover Image, Volume 141, Issue 13	57
Magnetite‐Functionalized Molecularly Imprinted Polymer for Selective Removal of Dimethyl Phthalate	53
Preparation and characterization of reprocessable poly(1,2,3‐triazolium)	50
Fatigue Behaviors and Damage Modeling of Track Slab‐SCC Interfaces in CRTS III Slab Tracks: Influence of Polymer Modification	50
Cover Image, Volume 139, Issue 36	49
Editorial Board, Aims & Scope, Table of Contents	46
Influence of unipolar electric fields on the behavior of dielectric elastomer actuators based on plasticized acrylonitrile‐butadiene rubber (NBR)	45
Investigation into transport behavior of platinum‐Nafion interface with functionalized graphene oxide	45
E/Z reversible photoisomerization of methyl orange doped polyacrylic acid‐based polyelectrolyte brush films	43
Cover Image, Volume 140, Issue 13	42
Editorial Board, Aims & Scope, Table of Contents	41
Aliphatic‐aromatic copolyesters containing monophenyl terephthalic acid and biphenyl 4,4′‐oxybisbenzoic acid: Influence of composition and chemical microstructure on thermal and mechanical properties	40
Microbubble on fiber method to determine the contact angle between steel substrates and highly viscous molten PEKK and PA 6	39
Morphological, thermal, and solid‐state viscoelastic properties of thermoplastic polyester elastomer‐graphitic carbon nitride composites	39

Effect of CeO₂ NPs on stability of regenerated silk fibroin against UV‐aging	39
An efficient new method for electrospinning chitosan and heparin for the preparation of pro‐angiogenic nanofibrous membranes for wound healing applications	38
Synthesis of polystyrene derivative‐silica hybrids via in situ thiol‐ene reaction in the sol–gel process	37
High‐performance graphitic nanoplatelets & high‐density polyethylene nanocomposites	36
Synthesis of novel biphenyl‐fused alicyclic tetracarboxylic dianhydride and its performance in thermostable and transparent colorless polyimides	36
Efficient synthesis of phosphorus containing melamine salt for enhancing flame retardancy of poly(lactic acid)/polyamide 11 blends	36
Preparation and performance study of self‐crosslinking functionalized poly(aryl piperidine) anion exchange membrane	35
Asymmetrically structured polyvinylidene fluoride composite for directional high absorbed electromagnetic interference shielding	35
Effect of Mussel‐Inspired Polydopamine Functionalized Hydroxyapatite on the Properties of Natural Rubber Latex Films	34
Enhanced dielectric and mechanical properties of polylactic acid/polycaprolactone blends by introducing double‐layer carbon nanofillers	34
A highly efficient melamine/red phosphorus flame retardant for polyurethane‐based foams	34
Fine‐tuning of fully‐aromatic polyamide membrane for fluorinated water purification	33
Evaluation of Nano‐Zinc Borate Effects on Thermal Properties, Morphology, Antibacterial Activity, and Drug Release Behavior of Starch/Gelatin Hydrogel Films for Biomedical Applications	33
	32
	32
A viscoelastic–viscoplastic modeling approach for amorphous polymers in vacuum forming simulation	32
Synthesis and thermal characterization of polyesters and copolyesters containing selenium with potential self‐healing behavior	32
Effect of homemade PON compounded with expanded graphite ratio on flame retardancy of polystyrene resin	31
High‐Efficient Photochromic P123/WO_x Films via Semi‐Annealing for Enhanced Optical Data Storage	31
Dielectric elastomers with large actuation strain and high output force	30
Solvent‐Free Approach for Performance Regulation in Transparent Waterborne Polyurethane Acrylate Dispersions Through Excessive Neutralization	30
3D‐Printed Pinewood Biochar‐Reinforced Polylactic Acid/Polybutylene Adipate‐ co ‐Terephthalate (PLA/PBAT) Composites: A Green Solution for High‐Performan	30
PEG‐based polymer coated proppants in supercritical CO₂: A new approach in current fracturing protocols	30
Fatty acid modified cellulose: Preparation and application as green multi‐functional additive in a tyre tread formulation	30
Effect of air gap induction on the morphological microstructure of polyether sulfone hollow fiber membrane	29
Versatile and Environmentally Sustainable Triboelectric Nanogenerator Utilizing Bio‐Ingorganic Hybrid Fibers for Low‐Frequency Energy Harvesting	29
Optimized Pore‐Filled PTFE Anion Exchange Membranes Incorporating Graphene Oxide for Durable Electrochemical Applications	29
PEKK /Polydopamine‐Coated Magnesium Hybrids Fabricated by Spark Plasma Sintering: Processing and Improved Mechanical Properties	29
Electrochemical performances and antibacterial activity of green synthesized cobalt oxide nanoparticles and poly (o‐Phenylenediamine) based textile supercapacitor	28
Editorial Board, Aims & Scope, Table of Contents	28
Nanoconfinement‐Tailored g‐C ₃ N ₄	28
Composites produced from waste plastic with agricultural and energy sector by‐products	28
Combined effect of montmorillonite Cloisite 30B and graphene nanoplatelets on high‐density polyethylene matrix under high strain rate dynamic compression	28
Editorial Board, Aims & Scope, Table of Contents	28
Surface coatings of contact lenses for cell sheet transplantation	28
Correction to “Acid catalyzed epoxy–methylolphenol thermosets: A structure–property study”	28
Manipulating Recyclable Epoxy Vitrimer With Superior Thermal and Mechanical Performance via Multiple Dynamic Imine Enhancement	28
Moisture‐Tolerant Polyurethane‐Based Bone Cement Containing Enoxacin for the Sex‐Specific Repair of Osteoporotic Defects	28
Isocyanate‐chitin modified microspheres for chiral drug separation in high performance liquid chromatography	27
Engineering Layer‐by‐Layer Modified Porcine Acellular Dermal Matrix for Abdominal Wall Repair: A Multifunctional Approach to Overcome Infection, Inflammation, and Adhesion Challenges	27
Synthesis and characterization of epoxy resin‐polydicyclopentadiene interpenetrating polymer networks by UV‐initiated simultaneously frontal polymerization	27
Development of Phosphorus‐Doped Carbon Nitride‐Coated Ammonium Polyphosphate Flame Retardant and Its Effect on the Fire Safety of Epoxy Resins	27
Improved performance of polyvinylidene fluoride membrane blended with modified multi‐walled carbon nanotubes by electret treatment	27
High vinyl polybutadiene rubber/polypropylene thermoplastic elastomer blends: Optimization of internal mixing process parameters and screening of processing methods	27
Enhancement of electrospun UHMWPE fiber performance through post‐processing treatment	27
Photo‐controllable cationic homopolymerization and random copolymerization of vinyl ethers based on iridium salt photocatalyst	27
A synergistic strategy for fabricating a highly flexible poly(m‐phenylene isophthalamide) nanofiber‐reinforced polyimide aerogel for high‐temperature filtration	27
Solid polymer electrolyte membrane based on cationic polynorbornenes with pending imidazolium functional groups for all‐solid‐state lithium‐ion batteries	27
Controllable Preparation of Hydroxyl‐Terminated Liquid Polydiene Rubber Featuring High 1,4‐Content by Neodymium‐Mediated Coordinative Chain Transfer Polymerizations Strategy	27
Synergistic flame retardant effect of cerium‐based DOPO derivative and intumescent flame retardants in polypropylene	26

Machine learning investigation of polylactic acid bead foam extrusion	26
Al₂O₃/graphene/PVDF‐HFP radiative cooling coating reinforced heat dissipation of BIPV modules	26
Chemical combination of nano‐silica and alkaline lignin for property enhancement of polylactic acid‐based composite films	26
Fe₃O₄‐nanoparticle‐functionalized 3D‐printed injectable microgel	26
Enhancement of the dielectric energy storage performance of PVDF‐TrFE composite film via core‐shell structured (1‐x)Ba(Ti_0.8Zr_0.2)O₃‐x(Ba_0.7Ca	26
Smart anti‐fouling and self‐repairing polymer brushes for efficient oil–water separation	26
Melamine as cross‐linking agent for mono‐cyclic benzoxazine with aldehyde groups: higher crosslinking density and thermal properties	26
Hydrophobic deep eutectic solvent‐based ionic conductive gels with highly stretchable, fatigue‐resistant and adhesive performances for reliable flexible strain sensors	26
Triple Stimuli Responsive p( NIPAM ‐co‐ MAA ‐co‐ SPMA	26
Step‐wise non‐solvent induced phase separation of polyacrylonitrile/thermoplastic polyurethane self‐supportive filtration membranes	26
Surface modification for enhanced Anti‐Wetting properties of electrospun omniphobic membranes in membrane distillation	26
Thermo‐oxidative degradation behavior of poly(vinyl chloride) insulation for new and overloaded wires via TG‐FTIR	26
Corrosion inhibition of Q235 steel by epoxy coatings containing FG@ZIF‐8	26
Preparation and Gas Separation Performance of Ionic Liquid Modified Covalent Organic Framework/Fluorinated Polyimide Mixed Matrix Membranes	26
4D printing of bilayer tubular structure with dual‐stimuli responsive based on self‐rolling behavior	26
Effect of Multi‐Walled Carbon Nanotubes on the Properties of EPDM Composites Reinforced With Polyimide Short Fibers Prepared by Solution Wet Mixing	25
Hybrid Polymer Nanocomposite of Ionically Crosslinked Chitosan/Tin Oxide Nanoparticles for Eosin Y Dye Removal: Isotherm, Kinetic, and Adsorption Optimization	25
Reinforcement Mechanisms in Core@Shell ZnO / PP Composites: Machine Learning‐Driven Filler Optimiz	25
Correlation between non‐isothermal crystallization kinetics and morphology in poly(ε‐caprolactone)/poly(styrene‐co‐acrylonitrile) blends considering the blend phase behavior: Effects of poly(ε‐caprola	25
Effect of addition of triallyl isocyanurate and post‐ultraviolet irradiation on the selected properties of composites of poly(lactic acid), poly(butylene succinate) and nano‐sized calcium carbonate	25
Evaluation of Eudragit/Polycaprolactone/2,3‐Diphenyl‐3‐Hydroxyflavone Derivative Composite Electrospun Nanofibers for Sustained Drug Delivery	25
Novel poly(ester amide) derived from tyrosine amino acid for targeted pulmonary drug delivery of fluticasone propionate	24
Probing the Synergistic Effect of Modified Polyoctadecyl Acrylate and Asphaltenes on the Flowability of Waxy Oil	24
Study on Mechanical and Tribological Properties of Nitrile Butadiene Rubber and Hydrogenated Nitrile Butadiene Rubber Blends Reinforced With Spherical Nano‐	24
Bio‐Based Copolymer Design Enables Microstructured PEBA Membranes for Efficient Propane Separation	24
Sorbitol‐Modified Poly(Propylene Carbonate) for High‐Performance Biodegradable Mulch Films: Synergistic Enhancement of Thermal, Mechanical, and Degradable Properties	24
Harmless photonic crystal tattoo with angle‐independent structural color based on SiO₂ nanoparticles and silk fibroin	24
Influence of Amorphous Silica‐Aluminas Acidic Sites Concentration on the Flame‐Retarding Properties and on the Thermal Stability of Intumescent Polypropylene Composites	24
Phthalonitrile Co‐Resin Blends for Improved Processing and Oxidative Stability	24
Synthesis and characterization of novel main‐chain benzoxazines containing cycloaliphatic and aliphatic structures and their thermal and dielectric properties	24
A Bilayered Electrospun Vascular Graft Enabling Differentiation of Adipose Derived Mesenchymal Stem Cells Toward Smooth Muscle Lineage	24
In Vitro and In Vivo Evaluation of Wound Dressing Based on PCL Nanofibers Loaded With Linum usitatissimum	24
Accessible approach of fabricating pH‐responsive nanofibrous membranes with photothermal effect as antibacterial wound dressings	24
Effect of ChCl : MEA DES Ratio on Plasticization and Performance of Thermoplastic Starch/Lignin Bl	24
Effects of a liquid metal co‐filler on the properties of epoxy/binary filler composites	24
A new bio‐based flame retardant simply synthesized: Improving the flame retardancy and thermal stability of low‐density polyethylene together with melamine cyanurate	23
Production and comprehensive characterization of PVA/chitosan transdermal composite mats loaded with bioactive curcumin; evaluation of its release kinetics, antioxidant, antimicrobial, and	23
Chemical bonding and hydrogen bonding facilitated higher interfacial interaction of PA6/BF/POSS composites	23
Inserting urethane into 1,2,3‐triazole click‐cured solid propellant binder to form microphase separation and enhance mechanical and combustible performances	23
Investigating the hydrophilicity of phenol formaldehyde foams: Effects of synthesis parameters	23
A facile method for synthesis of novel phenyl phosphates flame retardants and their application in epoxy resin	23
Effects of tributyrin as plasticizer in poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) on processability, mechanical, and thermal properties	23
Co‐axial electrospinning of liposomal propolis loaded gelatin‐zein fibers as a potential wound healing material	23
Radiation Crosslinked Marine Polysaccharide Aqueous Gel Quercetin Silver Nanocomposite for Synergistic Treatment of Acne	23
One‐pot immobilization of formate dehydrogenase on silica nanoparticles based on catechol chemistry with or without polyethyleneimine	23
Editorial Board, Aims & Scope, Table of Contents	23
Preparation and Performance Characterization of Novel Shale Inhibitors	23
Optimization of the Vulcanization Process of Thick Rubber Based on a New Vulcanization Kinetic Model	23
Preparation and Performance of PVA–Benzoxazine Membranes for the Rejection of Some Heavy Metals via Pervaporation	23
Microstructure Tuning and Performance Enhancement of Polystyrene Foams via Ball‐Milled Biochar–Induced Nucleation in Supercritical CO	23
Large π‐Conjugated Structure Strategy for Optimizing Polyimide Film‐Forming Properties and Developing Gas Fluorescence Sensors	22
A Study on the Effects of Multiple Factors on the Irradiation Aging of EPDM Composites: Experimental and Machine Learning Approaches	22
Extrusion Coating of Poly(Hydroxyalkanoates) ( PHAs ) and Blends: Modifying the Mechanical Properties and Water Vapor Barrier Performance	22
Tribological behavior of silicon nitride reinforced polycarbonate nanocomposites	22
Editorial Board, Aims & Scope, Table of Contents	22
DMTMM‐mediated grafting reaction of glucuronic acid on chitosan	22
Synthesis and performance evaluation of crosslinker for seawater‐based fracturing fluid	22
High‐damping ultralow−gel nonpolar elastomeric polymer through thiol−ene photo−click chemistry reaction	22
Probing the Effect of Prepolymerization on the Structure and Properties of Phthalonitrile Resin/Basalt Fiber Composites	22
Preparation of Environment‐Friendly PBAT ‐Based Foams With Enhanced Mechanical and Antibacterial Performance via PVA	22
Hierarchical Micro/Nano‐Architected Nylon Mesh Integrated With Metal–Organic Framework, Cellulose Nanocrystal, and Graphene Oxide for High‐Efficient Oil–Water Separation	22
Synergistic effect of thermoplastic polyester elastomer and polytetrafluoroethylene in situ fibrillation on the resilience and compression strength of long‐chain branched polypropylene foam	22
Preparation and properties of cellulose nanofibers/α‐zirconium phosphate nanosheets composite polyvinyl alcohol ion‐conductive organohydrogel and its application in strain sensors	21
Bio‐Inspired Graded and Uniform Cylindrical Lattices Fabricated by Material Extrusion 3D Printing: An Experimental and Numerical Investigation	21
Flame‐resistant and tough polyvinyl alcohol film with ultraviolet‐absorbing capacity	21
Study on preparation and anticorrosive performance of a new high hydrophobic anticorrosive coating	21
Electron and Gamma‐Ray Shielding Performance of Glass Fiber‐Reinforced Polyester Composites With Inorganic Fillers	21
A new characterization approach for heat sealing of polymer packaging films identifying optimum sealing parameters using Pareto‐based trade‐off analysis	21
Optical and mechanical properties of PNIPAm‐MWCNTs and PNIPAm‐GO composites	21
Enhancing dynamic viscoelastic performance of flax fiber/fly ash hollow cenosphere‐reinforced composites coated by in situ fabrication of ultrasonically synthesized nanotitanium dioxide	21
Experimental study on the availability of polyurethane foam used as compressible layers in subsea tunnels	21
Effects of Incorporation of Organic Montmorillonite on Improving the Wear Resistance of Nylon 66/Glass Fiber Based Composites and the Mechanisms	21
Preparation of modified polylactic acid fiber containing anti‐hydrolysis agents	21
Evaluation of PET recyclability and characterization of modified reprocessed‐PET for industrial application	21
Impact of Electromagnetic Pulse ( EMP ) on Conductive Rubber Gasket Electromagnetic Shielding Performance	21
Biodegradable Mulch Film With Improved Mechanical and Barrier Properties for Sustainable Agricultural	21
Enhancement of sustainable fused deposition modeling 3D‐printing with agave Americana fiber‐reinforced poly(lactic) acid biofilaments	21
Thermal, Dielectric, and Microwave Shielding Efficiency of the Lead Ferrite‐RGO Nanocomposite‐Reinforced PVA‐PEG Films	21
Tricomponent polymer aerogels containing cellulose nanocrystals and chitin nanofibers and their use in aerogel/hydrogel hybrids as fibrocartilage replacements	21
Effect of Sulfonamide Functionalization on the Corrosion Inhibition Efficiency of Chitosan for Carbon Steel in 1.0 m HCl : Experimental and Computati	21

Bending Deformation of Soft Magnetic Elastomer Under an External Magnetic Field	21
A stretchable flexible strain sensor with high sensitivity and fast response fabricated by embedded 3D printing of the hybrid polydimethylsiloxane/conductive carbon paste composites	21
Experimental Evaluation and ANN ‐Based Prediction of Polymer Spur Gears Fabricated by Additive Manufacturing	21
The Analysis of Wettability and Mechanics of Polyimide Film With Atmospheric Pressure Plasma Treatment	20
Biomedical Translation Potential of Shape‐Memory Polymers: Design Considerations, Emerging Applications and Challenges	20
Innovative Polymer Nanocomposite of P(VDF‐TrFE)/PEDOT:PSS/MgO for High‐Performance Supercapacitors	20
Study on the Relationship Between the Microstructure and Density of Polyacrylonitrile‐Based Pre‐Oxidized Fibers	20
Bio‐Inspired Functionalization of Carbon Nanotubes and Their Effect on the Anti‐Fouling Properties of Polysulfone Ultrafiltration Membranes	20
Polyvinyl (alcohol)/chitosan active film supplemented with Sonneratia ovata extract and Piper betel L. oil for fresh‐cut beef preservation	20
Bilayer Superwetting Nickel Foam ( NF ) Composite Used for the Efficient Separation of Oil‐in‐Water Emulsion	20
CNTs‐coated TPU/ANF composite fiber with flexible conductive performance for joule heating, photothermal, and strain sensing	20
Study of hybrid isocyanate and high‐mono‐hydroxymethyl urea content urea‐formaldehyde resins	20
Editorial Board, Aims & Scope, Table of Contents	20
Preparation and Characterzation of High‐Thermal‐Stability PI / PEKK Composite Films	20
Click Preparing UV‐Curable Polybutadiene Films With Good Thermal and Mechanical Performances by Using Multifunctional Mercaptan as a Cross‐Linking Agent	20
Preparation of PEK‐C‐toughened epoxy structural adhesive for bonding CF/PEEK composites	20
Efficient removal of Cr(VI) from aqueous solutions using chitosan/Na‐alginate bio‐based nanocomposite hydrogel	20
Compatibilization and Characterization of Recycled Polyolefin Blends Using α‐Olefin Elastomers for Sustainable High‐Performance Materials	20
Novel protective coating based on the prepared Cu (II) and Co (II)‐containing linoleic poly(esteramide) as new anticorrosive and antimicrobial binders for industrial applications	20
Optical Band Gap and Dielectric Relaxation in Biopolymer of Polyvinylidene Fluoride ( PVDF ) and Thermoplastic Polyurethane (	20
Oil‐based epoxy and their composites: A sustainable alternative to traditional epoxy	20
Catalyst‐free epoxy resins with high‐performance and excellent healing efficiency via interpenetrating networks	20
Bio‐Surfactant (Sophorolipids) Pre‐Coating for Thin‐Film Composite Membranes With Enhanced Dye Separation Performance	20
A Facile Strategy to Construct 3D Nanofiber‐Assembled Freestanding Aerogel With Superlight and Efficient Thermal Insulation Properties	20
Novel phase‐change PDA‐Ni@GNS/CNF‐C/SA/PEG composites with ultrahigh shape stability and latent heat as thermal management material for microelectronic devi	20
Lightweight, robust, porous heterocyclic para‐aramid aerogel hollow fibers for multifunctional applications	20
Study of antifouling and decolorization effect in polyethersulfone membranes improved with dendrimer‐modified metal–organic frameworks	20
Self‐Healing and Recyclable Waterborne Polyurethane With Ultra‐High Toughness Based on Dynamic Covalent and Hydrogen Bonds	20
Synthesis of IPDI@PU Microcapsule Curing Agent and Its Curing Behavior for Epoxy Resin	20
Effect of Confinement on Gas Barrier and Mechanical Properties of Rheologically Mismatched Multilayer TPU Films	20
Effect of thermal stretching on properties of poly (arylene ether nitrile)/aramid staple fiber composites	20
Lightweight Composite Aramid Nanofiber Aerogel With Multistage Pores and Layered Structure for Acoustic and Thermal Insulation	20
Dense and Highly Wrinkled Polyamide Nanofiltration Membrane via Synergistic PEI – TiO	20
Improved high‐temperature energy storage density at low‐electric field in BOPP/PVDF multilayer films	20
Structure–property evolution of poly(ethylene terephthalate)/poly(trimethylene terephthalate) side‐by‐side self‐crimp filament	20
Synthesis of diacylglycerol‐terminated lipid–polymer conjugates: Application to cell surface modification	19
Flexible Wearable Sensor Based on a Chemically Cross‐Linked PAALi / EG /Zn(	19
A Hierarchically Structured Fe ₃ O ₄	19
Using multi‐component carbon composite as current collector in ultra‐battery	19
Editorial Board, Aims & Scope, Table of Contents	19
Mechanical fatigue of recycled and virgin high‐/low‐density polyethylene	19
Identification of Multilayer Packaging Materials by Selective Dissolution and Precipitation With Minimal Concentration of Solvents, FTIR , and	19
Effects of crystallization temperature and cooling rate on the polymorphism of trans‐1,4‐polyisoprene vulcanizate	19
Chitosan‐based self‐healing hydrogel mediated by poly(acrylic‐methacrylic acid) exhibiting high biocompatibility and anti‐tumor activity	19
Fabrication and performance evaluation of an innovative asymmetric polyethersulfone composite membrane for efficient methyl blue filtration	19
Magnetically induced PSA composited CNT‐Fe₃O₄ ultrafiltration membrane	19
Noncovalent Cross‐Linked Network‐Reinforced High‐Toughness Polyvinyl Alcohol/Hyperbranched Polyester Films Obtained Through Solution Blending	19
Wet continuous mixing technique based on full formula of carbon black	19
Homogeneous polyurethane foaming systems containing polyester diol, ethylene glycol, and alkylated polyethylenimine‐CO₂ adducts	19
Chiral resolution of ketoprofen by modified polymethyl methacrylate microspheres	19
A dual‐stimuli responsive supramolecular nanovector anchoring folic acid ligands for targeted delivery of anti‐colorectal drug hydroxycamptothecin	19
Preparation and Characterization of Optical PMMA / ZIF ‐8 Composite Films for Potential Gas Sensin	19
Phase change composites derived from chromium‐containing leather solid waste for efficient solar‐thermal energy storage	19
Improved Dewatering of Mature Fine Tailings Using High Molecular Weight Polyacrylamide Grafted From an Activated Carbon Surface by Surface‐Initiated ATRP	19
Editorial Board, Aims & Scope, Table of Contents	19
	19
Photochromic performance optimization of polyurethane microcapsules by interfacial polymerization method	19
Cotton From Industrial Waste Modified for Effective Absorption of Oil Spills	19
Synthesis of Novel Bio‐Based Schiff Base Flame Retardant to Improve the Fire Safety of Epoxy Resin	19
Enhancing fresh strawberry preservation: Fabrication and characterization of electrospun fibers decorated with functionalized graphene oxide	19
Synthesis and properties of semicrystalline non‐isocyanate polyurethane with tunable triple shape memory properties	19
Editorial Board, Aims & Scope, Table of Contents	19
Modified Si₃N₄ filler enhancing the energy storage performance and thermal stability of a P(VDF‐HFP) based composite	19
Dual‐Loading Strategy Constructing Smart Coatings With Novel Hydroxyapatite/ZIF‐8 Composites	18
Supercritical CO₂‐assisted formation of metal–organic framework‐loaded porous polystyrene membranes for dye removal	18
Preparation of Cerium Oxide/Nylon 6 Nanocomposite and Its UV Shielding Performance	18
	18
Dihydromyricetin encapsulated gelatin‐dialdehyde‐β‐cyclodextrin hydrogels for antibacterial application	18
Preparation and Properties of Semi Aromatic Poly(Ester Amide)s Fibers Based on 6‐Aminohexanol	18
Facile One‐Step Fabrication of Carboxylic Acid‐Functionalized PolyHIPE for Efficient Heavy Metal and Dye Removal From Water	18
Editorial Board, Aims & Scope, Table of Contents	18
Development of poly(vinyl acetate) adhesive with hot water resistance via constructing semi‐IPN/IPN structures with hydroxymethylated lignin	18
Selective Distribution of Silica Nanoparticles in Epoxy/Thermoplastic Blends and Its Impact on Mechanical Properties	18
Gel‐Polymer Electrolytes Based on Organophosphorus Polyurethanes for Lithium Power Sources	18
Anisotropy induced in magnetic field in GNPs/epoxy composites used as an effective heat dissipation electronic packaging material	18
Synthesis and properties of trifluoromethyl organosilicon cycloaliphatic epoxy monomers for cationic photopolymerization	18
Structure and properties of bio‐based poly(trimethylene terephthalate)/polyamide 56 blends prepared by melt mixing	18
Volumetric Swelling Behavior of PAAm / PVA IPN ‐Based Particulate Agents and Plugging Control Desi	18
Modification of poly(styrene‐b‐isobutylene‐b‐styrene) using hyaluronic acid via surface graft polymerization and cytotoxicity investigation	18
Preparation and Performance Study of PLA‐/PBAT‐Based TPV	18
Preparation, acidolysis kinetics and scale inhibition performance of low molecular weight poly(maleic anhydride‐alt‐vinyl acetate) based on self‐stabilized precipitation polymerization	18
Incorporating Thiolated Gelatin via Thiol–Ene Reaction Into Polyurethane for Hybrid Nanocomposite of GO/Alkened‐PU: Antioxidant and Antibacterial Evaluation	18
Performance Comparison and Ablation Mechanism Study of Short‐Cut High‐Silica Oxide Fiber and Aramid Fiber Reinforced Silicone Rubber Thermal Protection Coatings	18
Amphoteric ionic polymer large temperature difference retarder for long sealing section cementing low‐density cement slurry: Preparation, application, and working mechanism	18
Glutaric Anhydride as Additive for the Development and Optimization of N‐Acetyl‐L‐Cysteine‐Conjugated Mucoadhesive Galactomannan Microspheres for Extended Release of Glimepiride	18
Optimization of the Electrospinning Process to Create an Active Bilayer Nanostructured Wound Dressing Based of PLA and Ibuprofen	18
Study on Preparation and Performance of Low Water Absorption Thermal Insulation Coating Using Aluminate Coupling Agent‐Modified Hollow Glass Microspheres	18
Machine Learning‐Based Automatic Scratch Performance Quantification on Polymeric Surfaces	17
Rapidly photocrosslinkable modified PF‐127 hydrogels for treatment of hemorrhage	17
Synthesis of a graft‐functionalized flame retardant based on DOPO and its application on the surface of terylene/cotton fabrics	17
Reactive Flame Retardation Strategy Inspired High‐Performance Rigid Polyurethane Foam With Superior Charring Ability and Low Fire Toxicity	17
Properties and morphology of polylactic acid composites reinforced by orientation aligned calcium carbonate whisker	17
	17
Study on the Degradation Behavior and Performance Evolution of Rubber in Hot‐Air Aging Environments	17
Preparation of polyaniline‐aniline modified silicon dioxide composite with synergistic anticorrosion effect for waterborne epoxy anticorrosive coatings	17