Journal of Applied Polymer Science

Article	Citations
Comparison of temperature rise within pulp chamber during light curing of composite restoration	134
	94
Polymer melting temperatures and crystallinity at different pressure applied	81
Performances of novel poly(diaryloxyphosphazene) based heat shielding materials with various fibrous reinforcements	74
Editorial Board, Aims & Scope, Table of Contents	69
Novel phase‐change PDA‐Ni@GNS/CNF‐C/SA/PEG composites with ultrahigh shape stability and latent heat as thermal management material for microelectronic devi	68
High vinyl polybutadiene rubber/polypropylene thermoplastic elastomer blends: Optimization of internal mixing process parameters and screening of processing methods	66
	63
	62
Enhancement of the dielectric energy storage performance of PVDF‐TrFE composite film via core‐shell structured (1‐x)Ba(Ti0.8Zr0.2)O3‐x(Ba0.7Ca	61
Dispersion stability of chitosan grafted graphene oxide nanosheets in cementitious environments and their effects on the fluidity of cement mortar nanocomposites	60
Effect of air gap induction on the morphological microstructure of polyether sulfone hollow fiber membrane	58
Phosphorus/nitrogen compound and zinc hydroxystannate‐modified graphene oxide for efficient flame retardancy and smoke suppression of epoxy resin	58
Experimental study on the availability of polyurethane foam used as compressible layers in subsea tunnels	55
Effect of Mussel‐Inspired Polydopamine Functionalized Hydroxyapatite on the Properties of Natural Rubber Latex Films	54
Segmental and interfacial dynamics quantitatively determine ion transport in solid polymer composite electrolytes	53
Self‐Healing and Recyclable Waterborne Polyurethane With Ultra‐High Toughness Based on Dynamic Covalent and Hydrogen Bonds	53
An efficient new method for electrospinning chitosan and heparin for the preparation of pro‐angiogenic nanofibrous membranes for wound healing applications	52
Pervaporation of dichloromethane‐cyclopentane and methylal‐cyclopentane mixtures through membranes from chloroprene rubber	51
Synthesis of graphene oxide functionalized by phytic acid for anticorrosive reinforcement of waterborne epoxy coating	51
A new characterization approach for heat sealing of polymer packaging films identifying optimum sealing parameters using Pareto‐based trade‐off analysis	50
Sustainable and biodegradable poly(butylene succinate‐co‐terephthalate)/poly(propylene carbonate) blown films with enhanced compatibility, mechanical, and barrier properties	49
Polyvinyl (alcohol)/chitosan active film supplemented with Sonneratia ovata extract and Piper betel L. oil for fresh‐cut beef preservation	48
Well‐dispersed poly(ether‐ether‐ketone)/multi‐walled carbon nanotubes nanocomposite for harsh environment applications	48
Cover Image, Volume 141, Issue 13	47

In situ cross‐linking capability of novel amine‐functionalized graphene with epoxy nanocomposites	47
Cover Image, Volume 139, Issue 36	47
Application of process simulation and statistical method to acrylamide polymerization in a batch reactor	46
Oxidized cyclodextrin inclusion tea tree oil to prepare long‐lasting antibacterial collagen scaffold for enhanced wound healing	45
The effects of carbon nanotubes selective location on the structures and properties of polyphenylene sulfide/polyamide 66 fibers	44
UV curable micro‐structured shape memory epoxy with tunable performance	44
Effects of tributyrin as plasticizer in poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) on processability, mechanical, and thermal properties	44
Characterization of wood‐filled thermoplastic polyurethanes for the injection molding process	41
A facile method for synthesis of novel phenyl phosphates flame retardants and their application in epoxy resin	41
A viscoelastic–viscoplastic modeling approach for amorphous polymers in vacuum forming simulation	41
Preparation of modified polylactic acid fiber containing anti‐hydrolysis agents	39
Effect of homemade PON compounded with expanded graphite ratio on flame retardancy of polystyrene resin	39
Effect of addition of triallyl isocyanurate and post‐ultraviolet irradiation on the selected properties of composites of poly(lactic acid), poly(butylene succinate) and nano‐sized calcium carbonate	39
Microencapsulation of bisphenol A‐bis(diphenyl phosphate) by Pickering emulsions polymerization and its application in water‐borne polyacrylic acid coatings	38
Fine‐tuning of fully‐aromatic polyamide membrane for fluorinated water purification	38
Influence of unipolar electric fields on the behavior of dielectric elastomer actuators based on plasticized acrylonitrile‐butadiene rubber (NBR)	37
Influence of DBD treated nano‐Al2O3 on thermal and electrical insulation properties of epoxy nanocomposites at high temperatures	37
Enhancing dynamic viscoelastic performance of flax fiber/fly ash hollow cenosphere‐reinforced composites coated by in situ fabrication of ultrasonically synthesized nanotitanium dioxide	36
E/Z reversible photoisomerization of methyl orange doped polyacrylic acid‐based polyelectrolyte brush films	36
An edible erodible semi‐interpenetrating polymer network as a microcapsule shell to protect probiotic bacteria during reconstitution of powdered infant formula at elevated temperatures	34
Synthesis and performance evaluation of crosslinker for seawater‐based fracturing fluid	34
	33
PEG‐based polymer coated proppants in supercritical CO2: A new approach in current fracturing protocols	33
	33
Preparation and characterization of reprocessable poly(1,2,3‐triazolium)	32
Editorial Board, Aims & Scope, Table of Contents	32
High‐performance graphitic nanoplatelets & high‐density polyethylene nanocomposites	32
Cross‐linked cationic polyvinyl alcohol for improving mechanical strength of paper	32
Photo‐controllable cationic homopolymerization and random copolymerization of vinyl ethers based on iridium salt photocatalyst	31
Accessible approach of fabricating pH‐responsive nanofibrous membranes with photothermal effect as antibacterial wound dressings	31
Synthesis of polystyrene derivative‐silica hybrids via in situ thiol‐ene reaction in the sol–gel process	30
A stretchable flexible strain sensor with high sensitivity and fast response fabricated by embedded 3D printing of the hybrid polydimethylsiloxane/conductive carbon paste composites	30
Study of hybrid isocyanate and high‐mono‐hydroxymethyl urea content urea‐formaldehyde resins	30
Reutilization of crystalline waste plastics for modified asphalt using twin‐screw extrusion: Polyethylene and polypropylene as typical subjects	30
Cover Image, Volume 140, Issue 13	30
UV curing: An alternative method for fixation of β‐carotene containing microparticles substances onto cotton fabrics by acrylic binder	29
Sulfonated Chitosan and HKUST‐1 metal organic frameworks based hybrid membranes for direct methanol fuel cell applications	29
Flame‐resistant and tough polyvinyl alcohol film with ultraviolet‐absorbing capacity	29
One‐pot immobilization of formate dehydrogenase on silica nanoparticles based on catechol chemistry with or without polyethyleneimine	29
Superior stretchable and tough P(AA‐co‐AAm)/silica hybrid hydrogels enabled by acid‐mediated radiation polymerization	29
Thermal degradation kinetics of industrial batch crosslinked polyethylene	29
A novel phosphorus compound acting as a substitute of DOPO for flame retard of epoxy resin	28
Solid polymer electrolyte membrane based on cationic polynorbornenes with pending imidazolium functional groups for all‐solid‐state lithium‐ion batteries	28
Correlation between non‐isothermal crystallization kinetics and morphology in poly(ε‐caprolactone)/poly(styrene‐co‐acrylonitrile) blends considering the blend phase behavior: Effects of poly(ε‐caprola	28
Synthesis of waterborne polyurethane nanocomposite adhesives of bio‐based polyol from rapeseed cake residual and cellulose nanowhisker	28
Investigation into transport behavior of platinum‐Nafion interface with functionalized graphene oxide	28
Click Preparing UV‐Curable Polybutadiene Films With Good Thermal and Mechanical Performances by Using Multifunctional Mercaptan as a Cross‐Linking Agent	28
Combined effect of montmorillonite Cloisite 30B and graphene nanoplatelets on high‐density polyethylene matrix under high strain rate dynamic compression	27
Enhancement of electrospun UHMWPE fiber performance through post‐processing treatment	27
Surface modification for enhanced Anti‐Wetting properties of electrospun omniphobic membranes in membrane distillation	27

Improved performance of polyvinylidene fluoride membrane blended with modified multi‐walled carbon nanotubes by electret treatment	27
Correction to “Acid catalyzed epoxy–methylolphenol thermosets: A structure–property study”	27
Erratum	26
Synergistic effect of thermoplastic polyester elastomer and polytetrafluoroethylene in situ fibrillation on the resilience and compression strength of long‐chain branched polypropylene foam	26
Hierarchical Micro/Nano‐Architected Nylon Mesh Integrated With Metal–Organic Framework, Cellulose Nanocrystal, and Graphene Oxide for High‐Efficient Oil–Water Separation	26
Wet continuous mixing technique based on full formula of carbon black	26
Large π‐Conjugated Structure Strategy for Optimizing Polyimide Film‐Forming Properties and Developing Gas Fluorescence Sensors	26
Space charge performance of epoxy composites with improved thermal property at high temperature under high electric field	26
Thermo‐oxidative degradation behavior of poly(vinyl chloride) insulation for new and overloaded wires via TG‐FTIR	26
Solvent‐Free Approach for Performance Regulation in Transparent Waterborne Polyurethane Acrylate Dispersions Through Excessive Neutralization	26
Corrosion inhibition of Q235 steel by epoxy coatings containing FG@ZIF‐8	26
Synthesis and characterization of epoxy resin‐polydicyclopentadiene interpenetrating polymer networks by UV‐initiated simultaneously frontal polymerization	26
Preparation of PEK‐C‐toughened epoxy structural adhesive for bonding CF/PEEK composites	25
Toughness enhancement of polyamide 6,12 with intermolecular hydrogen bonding with 3‐pentadecylphenol	25
	25
Simultaneously improving thermal conductivity and dielectric properties of poly(vinylidene fluoride)/expanded graphite via melt blending with polyamide 6	25
Smart anti‐fouling and self‐repairing polymer brushes for efficient oil–water separation	25
Synthesis and Conformational Relationship of New Fluorinated Acrylate Polymer‐Based Internal Mold Release Agents	25
Acrylate polymer prepared by dispersion polymerization and its crude oil emulsion demulsification performance	25
Synthesis of novel biphenyl‐fused alicyclic tetracarboxylic dianhydride and its performance in thermostable and transparent colorless polyimides	25
Effects of a liquid metal co‐filler on the properties of epoxy/binary filler composites	25
Effect of thermal stretching on properties of poly (arylene ether nitrile)/aramid staple fiber composites	25
Aliphatic‐aromatic copolyesters containing monophenyl terephthalic acid and biphenyl 4,4′‐oxybisbenzoic acid: Influence of composition and chemical microstructure on thermal and mechanical properties	25
pH‐sensitive and charge‐reversal Daunorubicin‐conjugated polymeric micelles for enhanced cancer therapy	25
Asymmetrically structured polyvinylidene fluoride composite for directional high absorbed electromagnetic interference shielding	24
Preparation and properties of cellulose nanofibers/α‐zirconium phosphate nanosheets composite polyvinyl alcohol ion‐conductive organohydrogel and its application in strain sensors	24
Isocyanate‐chitin modified microspheres for chiral drug separation in high performance liquid chromatography	24
Electrochemical performances and antibacterial activity of green synthesized cobalt oxide nanoparticles and poly (o‐Phenylenediamine) based textile supercapacitor	24
Fatigue Behaviors and Damage Modeling of Track Slab‐SCC Interfaces in CRTS III Slab Tracks: Influence of Polymer Modification	24
High‐damping ultralow−gel nonpolar elastomeric polymer through thiol−ene photo−click chemistry reaction	24
Probing the Effect of Prepolymerization on the Structure and Properties of Phthalonitrile Resin/Basalt Fiber Composites	24
Improvement of thermo‐mechanical and fatigue crack growth resistance of tire sidewall compound by introducing syndiotactic polybutadiene	24
Silacyclobutane‐functionalized cyclosiloxanes as photoactive precursors for high thermal stability, low dielectric constant and low dielectric loss polymers	24
High‐performance atactic polypropylene modified bitumen blends fabricated via conventional, hot, and in‐situ blending techniques	24
Bio‐Inspired Graded and Uniform Cylindrical Lattices Fabricated by Material Extrusion 3D Printing: An Experimental and Numerical Investigation	24
Locust bean gum‐polyvinyl alcohol hydrogels: Synthesis, characterization, swelling behaviors, and mathematical models	23
A synergistic strategy for fabricating a highly flexible poly(m‐phenylene isophthalamide) nanofiber‐reinforced polyimide aerogel for high‐temperature filtration	23
Tribological behavior of silicon nitride reinforced polycarbonate nanocomposites	23
Fabrication of zinc oxide‐coated microcrystalline cellulose and its application in truck tire tread compounds	23
Study of theself‐healingproperties of agedasphalt‐binderregenerated using residualsoybean‐oil	23
Structure–property evolution of poly(ethylene terephthalate)/poly(trimethylene terephthalate) side‐by‐side self‐crimp filament	23
Fatty acid modified cellulose: Preparation and application as green multi‐functional additive in a tyre tread formulation	23
Synthesis and thermal characterization of polyesters and copolyesters containing selenium with potential self‐healing behavior	23
Flexible anodic bonding for the bonding between elastomer and metal	23
DMTMM‐mediated grafting reaction of glucuronic acid on chitosan	23
Morphological, thermal, and solid‐state viscoelastic properties of thermoplastic polyester elastomer‐graphitic carbon nitride composites	23
Enhancement of sustainable fused deposition modeling 3D‐printing with agave Americana fiber‐reinforced poly(lactic) acid biofilaments	22
Synthesis and characterization of biobased polyester PVC plasticizers to industrial manufacturing of tubes	22
Composites produced from waste plastic with agricultural and energy sector by‐products	22
Dielectric elastomers with large actuation strain and high output force	22
Microbubble on fiber method to determine the contact angle between steel substrates and highly viscous molten PEKK and PA 6	22
Chemical combination of nano‐silica and alkaline lignin for property enhancement of polylactic acid‐based composite films	22
Surface coatings of contact lenses for cell sheet transplantation	22
Halochromic PLA/PEG as real‐time solution and vapor sensing	22
A new bio‐based flame retardant simply synthesized: Improving the flame retardancy and thermal stability of low‐density polyethylene together with melamine cyanurate	22
Al2O3/graphene/PVDF‐HFP radiative cooling coating reinforced heat dissipation of BIPV modules	22
High‐Efficient Photochromic P123/WOx Films via Semi‐Annealing for Enhanced Optical Data Storage	22
Preparation of poly(melamine‐formaldehyde‐2,2′‐bis(trifluoromethyl)benzidine) high‐performance fibers	22
Accelerating the stabilization of polyacrylonitrile fibers by nitrogen pretreatment	21
Novel poly(ester amide) derived from tyrosine amino acid for targeted pulmonary drug delivery of fluticasone propionate	21
Magnetite‐Functionalized Molecularly Imprinted Polymer for Selective Removal of Dimethyl Phthalate	21
Additivity of the mechanical properties for acrylonitrile‐butadiene‐styrene resins	21
Fabrication and characterization of dual layer PEBAX‐SiO2/polyethersulfone nanocomposite membranes for separation of CO2/CH4 gases	21
Evaluation of PET recyclability and characterization of modified reprocessed‐PET for industrial application	21
Optical and mechanical properties of PNIPAm‐MWCNTs and PNIPAm‐GO composites	21
Co‐axial electrospinning of liposomal propolis loaded gelatin‐zein fibers as a potential wound healing material	21
Permselectivity improvement of PEBAX® 2533 membrane by addition of glassy polymers (Matrimid® and polystyrene) for CO2/N2 separation	21
Preparation and Performance of PVA–Benzoxazine Membranes for the Rejection of Some Heavy Metals via Pervaporation	21
Shape Memory Polymers With High Response Temperature and Application in Wellbore Stability	21
Novel protective coating based on the prepared Cu (II) and Co (II)‐containing linoleic poly(esteramide) as new anticorrosive and antimicrobial binders for industrial applications	21
4D printing of bilayer tubular structure with dual‐stimuli responsive based on self‐rolling behavior	21
Effects of Incorporation of Organic Montmorillonite on Improving the Wear Resistance of Nylon 66/Glass Fiber Based Composites and the Mechanisms	21
Study on preparation and anticorrosive performance of a new high hydrophobic anticorrosive coating	21
Lightweight Composite Aramid Nanofiber Aerogel With Multistage Pores and Layered Structure for Acoustic and Thermal Insulation	21
Efficient synthesis of phosphorus containing melamine salt for enhancing flame retardancy of poly(lactic acid)/polyamide 11 blends	20
Fe3O4‐nanoparticle‐functionalized 3D‐printed injectable microgel	20
Preparation and performance study of self‐crosslinking functionalized poly(aryl piperidine) anion exchange membrane	20
Synthesis of IPDI@PU Microcapsule Curing Agent and Its Curing Behavior for Epoxy Resin	20
Photochromic performance optimization of polyurethane microcapsules by interfacial polymerization method	20
Step‐wise non‐solvent induced phase separation of polyacrylonitrile/thermoplastic polyurethane self‐supportive filtration membranes	20

Effect of acids and freeze–thaw on the durability of modified rubberized concrete with optimum rubber crumb content	20
Synergistic flame retardant effect of cerium‐based DOPO derivative and intumescent flame retardants in polypropylene	20
Study of antifouling and decolorization effect in polyethersulfone membranes improved with dendrimer‐modified metal–organic frameworks	20
Investigating the hydrophilicity of phenol formaldehyde foams: Effects of synthesis parameters	20
Catalyst‐free epoxy resins with high‐performance and excellent healing efficiency via interpenetrating networks	20
Effect of adding different silane coupling agents on metal friction and wear in mixing process	20
Mechanical performance and supermolecular morphology of void free polypropylene manufactured by fused filament fabrication	20
CNTs‐coated TPU/ANF composite fiber with flexible conductive performance for joule heating, photothermal, and strain sensing	20
Harmless photonic crystal tattoo with angle‐independent structural color based on SiO2 nanoparticles and silk fibroin	20
Effect of oligomers from epoxidized soybean oil and sebacic acid on the toughness of polylactic acid/bamboo fiber composites	20
Machine learning investigation of polylactic acid bead foam extrusion	20
Innovative Polymer Nanocomposite of P(VDF‐TrFE)/PEDOT:PSS/MgO for High‐Performance Supercapacitors	20
Oil‐based epoxy and their composites: A sustainable alternative to traditional epoxy	20
Preparation of a water‐dispersible nano‐photoinitiator oriented towards 3D printing hydrogel with visible light	20
Hydrophobic deep eutectic solvent‐based ionic conductive gels with highly stretchable, fatigue‐resistant and adhesive performances for reliable flexible strain sensors	20
Experimental optimization of process parameters on mechanical properties and the layers adhesion of 3D printed parts	20
Tricomponent polymer aerogels containing cellulose nanocrystals and chitin nanofibers and their use in aerogel/hydrogel hybrids as fibrocartilage replacements	19
Synthesis of doxorubicin‐loaded PBMA‐b‐POEGMA micelles and assessment of its anticancer activity against breast cancer cells (4T1)	19
Synthesis and characterization of novel main‐chain benzoxazines containing cycloaliphatic and aliphatic structures and their thermal and dielectric properties	19
Preparation and performance of polyether elastomer with a combination of polyurethane and polytriazole	19
Lightweight, robust, porous heterocyclic para‐aramid aerogel hollow fibers for multifunctional applications	19
Improve the compatibility and crystallization ability of polyhedral oligomeric silsesquioxanes and poly (ethylene terephthalate) by using transesterification method	19
Quantifying alignment in carbon nanotube yarns and similar two‐dimensional anisotropic systems	19
Chemical bonding and hydrogen bonding facilitated higher interfacial interaction of PA6/BF/POSS composites	19
Production of high quality green textile filaments from carboxymethylated cellulose covalently cross‐linked by reactive green 19 dye	19
Effect of CeO2 NPs on stability of regenerated silk fibroin against UV‐aging	19
Internal topology and water transport in tetrafunctional epoxy resins	19
Production and comprehensive characterization of PVA/chitosan transdermal composite mats loaded with bioactive curcumin; evaluation of its release kinetics, antioxidant, antimicrobial, and	19
Enhanced dielectric and mechanical properties of polylactic acid/polycaprolactone blends by introducing double‐layer carbon nanofillers	19
Evolution of the electrical resistivity at rest and during oscillatory shearing of co‐continuous morphology (PP/PMMA)/MWCNT systems	19
Improved high‐temperature energy storage density at low‐electric field in BOPP/PVDF multilayer films	19
Homogeneous polyurethane foaming systems containing polyester diol, ethylene glycol, and alkylated polyethylenimine‐CO2 adducts	19
Synthesis of a Phosphorus‐Based Polymer Antistatic Agent and the Impact on Polypropylene Properties	19
Inserting urethane into 1,2,3‐triazole click‐cured solid propellant binder to form microphase separation and enhance mechanical and combustible performances	19
Structure and performance control of high‐damping bio‐based thermoplastic polyurethane	19
Electro‐conductive nanofibrous structure based on PGS/PCL coated with PPy by in situ chemical polymerization applicable as cardiac patch: Fabrication and optimization	19
Efficient removal of Cr(VI) from aqueous solutions using chitosan/Na‐alginate bio‐based nanocomposite hydrogel	19
Ultrafine palladium nanoparticles confined in polydopamine functionalized chlorinated poly(vinyl chloride) nanofibers for Heck reaction	19
A highly efficient melamine/red phosphorus flame retardant for polyurethane‐based foams	19
Synthesis and properties of elevated temperature hydrogels for enhanced oil recovery based on AM/AMPA/NVP copolymer and silica nanoparticles	19
Thermoresponsive nanocomposite hydrogels with high mechanical strength and toughness based on a dual crosslinking strategy	19
Melamine as cross‐linking agent for mono‐cyclic benzoxazine with aldehyde groups: higher crosslinking density and thermal properties	19
High thermal resistance amorphous copolyesters synthesized from bio‐based 2,5‐furandicarboxylic acid	18
Assessment of blue crab Shell (Callinectes sapidus) particles as bio‐based filler to EPDM rubber	18
Green composites of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) and sugarcane bagasse fibers plasticized with triethyl citrate: Thermal, mechanical and morphological properties	18
Editorial Board, Aims & Scope, Table of Contents	18
Impacts of cellulose nanofibers on the morphological behavior and dynamic mechanical thermal properties of extruded polylactic acid/cellulose nanofibril nanocomposite foam	18
	18
Cover Image, Volume 139, Issue 4	18
Polyamidoamine dendrimers of the third generation–chlorin e6 nanoconjugates: Nontoxic hybrid polymers with photodynamic activity	18
Effect of melting temperatures on the orientation and rheology of polyacrylate/silica (PAcr/SiO2) composite microspheres in twin‐screw extruder	18
	18
Preparation and properties of transparent powder filled soft poly(vinyl chloride) composite film with high transparency	18
	18
On the thermogravimetric analysis of polymers: Polyethylene oxide powder and nanofibers	18
Synthesis of cellulose based super absorbent and its excellent oil–water separation properties	18
Effect of polydopamine deposition on wool fibers on the construction of melanin	18
Reinforcement of styrene‐acrylonitrile polymer bulk with glass nanofibers to introduce photoluminescent bricks	18
	18
	18
Editorial Board, Aims & Scope, Table of Contents	18
Editorial Board, Aims & Scope, Table of Contents	18
Gelatin‐based air‐entraining agents for ordinary portland cement: Chelate Ca2+ and reduce surface tension	18
Polyethylene based on molecular weight design for eco‐friendly asphalt	18
Synthesis and properties of trifluoromethyl organosilicon cycloaliphatic epoxy monomers for cationic photopolymerization	18
Electrically conductive nanocomposites based on poly(lactic acid)/flexible copolyester blends with multiwalled carbon nanotubes	18
A dual‐stimuli responsive supramolecular nanovector anchoring folic acid ligands for targeted delivery of anti‐colorectal drug hydroxycamptothecin	18
	18
Editorial Board, Aims & Scope, Table of Contents	18
Effects of crystallization temperature and cooling rate on the polymorphism of trans‐1,4‐polyisoprene vulcanizate	18
A poly(l‐lactic acid) braided stent with high mechanical properties during in vitro degradation in bile	18
Creation of adjacent monolithic and self‐forming porous fragments in a polymerizing layer by optical scanning stereolithography	18
Editorial Board, Aims & Scope, Table of Contents	18
Long‐term and fast‐bactericidal activity of methacrylamide‐based copolymer for antibiofilm coatings and antibacterial wipes applications	18
A Comparative Study on Friction Performance and Mechanical Properties of Printed PETG Materials With Different Patterns	17
Preparation of microcellular polycaprolactone/cellulose nanocrystal/carbon black conductive composites using the Pickering emulsion method combined with supercritical batch foaming technology	17
Effect of sintering on processability vis‐a‐vis microcellular foaming of ultrahigh molecular weight polyethylene	17
Controllable construction of “degressive gradient” transition layer on carbon fibers surface to enhance interfacial properties of carbon fiber/epoxy composites by layer upon layer assembly of carbon n	17
Fabrication and properties of polyhydroxybutyrate/kaolin nanocomposites and evaluation of their biocompatibility for biomedical applications	17
Enhancing polyethylene‐based nanocomposites through ethylene plasma polymerization of carbon nanotubes and sequential ultrasound dispersion with melt mixing method	17
Extrusion 3D printing of a multiphase collagen‐based material: An optimized strategy to obtain biomimetic scaffolds with high shape fidelity	17
Tribological performances of cellulose nanocrystals in water‐based lubricating fluid	17
Preparation of an oxyalkylated lignin‐g‐polylactic acid copolymer to improve the compatibility of an organosolv lignin in blended poly(lactic acid) films	17
Anisotropy induced in magnetic field in GNPs/epoxy composites used as an effective heat dissipation electronic packaging material	17
Silk fibroin/calcium alginate composite modifying supermacroporous molecularly imprinted membrane synthesis for high performance on recognizing bovine hemoglobin	17
Bio‐polymer modified nanoclay embedded forward osmosis membranes with enhanced desalination performance	17
Study of polypropylene/polyethylene terephthalate blends compatibilized with polypropylene double‐grafted maleic anhydride and epoxy resin	17
Electrospray deposition ofin‐situ UV‐photoactivatedpolyimide films	17
Effects of Molecular Structure Design on the Thermal, Mechanical, and Dielectric Properties of Polyarylene Ether Nitrile for Low‐Dielectric Applications	17
Synergistic flame retardancy of aluminum diethylphosphinate and piperazine pyrophosphate/β‐cyclodextrin in polylactic acid	17
Magnetically induced PSA composited CNT‐Fe3O4 ultrafiltration membrane	17
Synthesis and characterization of poly [(3,4‐ethylenedioxy) thiophene]:polystyrene sulfonate (PEDOT:PSS) for energy storage device application	17
Antimicrobial and anticancer potential of novel polyaspartate derivatives synthesized via quaternary ammonium grafting	17
Surface modification of the Nylon 6,6 and wasted glass fiber‐Nylon 6.6 coatings using atmospheric plasma treatment	17
Structural modification of UHMWPE fiber through hybridization and CNT reinforcement for ballistic applications	17