Journal of Aerosol Science

Article	Citations
Risk assessment of airborne transmission of COVID-19 by asymptomatic individuals under different practical settings	166
From low-cost sensors to high-quality data: A summary of challenges and best practices for effectively calibrating low-cost particulate matter mass sensors	156
Fundamental protective mechanisms of face masks against droplet infections	141
Modeling the formation and growth of atmospheric molecular clusters: A review	104
Evaluation of decontamination methods for commercial and alternative respirator and mask materials – view from filtration aspect	94
Breath-, air- and surface-borne SARS-CoV-2 in hospitals	86
A review of contact force models between nanoparticles in agglomerates, aggregates, and films	76
Insights into the evaporation characteristics of saliva droplets and aerosols: Levitation experiments and numerical modeling	75
Overview of measurements and current instrumentation for 1–10 nm aerosol particle number size distributions	63
Effects of aerosol type and simulated aging on performance of low-cost PM sensors	60
Evaluation of nine machine learning regression algorithms for calibration of low-cost PM2.5 sensor	52
Effects of renewable fuel and exhaust aftertreatment on primary and secondary emissions from a modern heavy-duty diesel engine	41
A review of liquid sheet breakup: Perspectives from agricultural sprays	39
Atmospheric clusters to nanoparticles: Recent progress and challenges in closing the gap in chemical composition	38
Tutorial: Guidelines for implementing low-cost sensor networks for aerosol monitoring	37
Optimization of an air-liquid interface in vitro cell co-culture model to estimate the hazard of aerosol exposures	37
SARS-CoV-2 in residential rooms of two self-isolating persons with COVID-19	36
Tutorial: Understanding the transport, deposition, and translocation of particles in human respiratory systems using Computational Fluid-Particle Dynamics and Physiologically Based Toxicokinetic model	35
Aerosol generation from different wind instruments	35
Advanced aerosol technologies towards structure and morphologically controlled next-generation catalytic materials	34
Long-term evaluation and calibration of three types of low-cost PM2.5 sensors at different air quality monitoring stations	31
Impact of outdoor air on indoor airborne microbiome under hazy air pollution: A case study in winter Beijing	30
Perspectives for regulating 10 nm particle number emissions based on novel measurement methodologies	30
Viable SARS-CoV-2 Delta variant detected in aerosols in a residential setting with a self-isolating college student with COVID-19	29
A systematic investigation on the effects of temperature and relative humidity on the performance of eight low-cost particle sensors and devices	29

Evaluation of white-box versus black-box machine learning models in estimating ambient black carbon concentration	28
Understanding vapor nucleation on the molecular level: A review	28
Size, concentration, and origin of human exhaled particles and their dependence on human factors with implications on infection transmission	27
Passive bioaerosol samplers: A complementary tool for bioaerosol research. A review	26
The effects of meteorological conditions and long-range transport on PM2.5 levels in Hanoi revealed from multi-site measurement using compact sensors and machine learning approach	26
Outward and inward protection efficiencies of different mask designs for different respiratory activities	25
Calibration of optical particle size spectrometers against a primary standard: Counting efficiency profile of the TSI Model 3330 OPS and Grimm 11-D monitor in the particle size range from 300 nm to 10	25
Examination of the evolution of iron oxide nanoparticles in flame spray pyrolysis by tailored in situ particle sampling techniques	24
Atmospheric aging processes of bioaerosols under laboratory-controlled conditions: A review	24
An experimentally validated model of diffusion charging of arbitrary shaped aerosol particles	24
Prediction of the carrier shape effect on particle transport, interaction and deposition in two dry powder inhalers and a mouth-to-G13 human respiratory system: A CFD-DEM study	24
Effects of dust particle sphericity and orientation on their gravitational settling in the earth’s atmosphere	24
The size-mobility relationship of ions, aerosols, and other charged particle matter.	23
Composite micro/nano fibrous air filter by simultaneous melt and solution electrospinning	23
High-efficiency dry powder aerosol delivery to children: Review and application of new technologies	23
An improved numerical model for epidemic transmission and infection risks assessment in indoor environment	23
Efficient bi-directional coupling of 3D computational fluid-particle dynamics and 1D Multiple Path Particle Dosimetry lung models for multiscale modeling of aerosol dosimetry	22
The effect of oral and nasal breathing on the deposition of inhaled particles in upper and tracheobronchial airways	22
The effectiveness of drones in measuring particulate matter	22
Modeling of the transport, hygroscopic growth, and deposition of multi-component droplets in a simplified airway with realistic thermal boundary conditions	22
A data-driven approach for characterizing community scale air pollution exposure disparities in inland Southern California	21
Behavior of ultrafine particles in electro-hydrodynamic flow induced by corona discharge	21
The role of the driving dynamics beyond RDE limits and DPF regeneration events on pollutant emissions of a Euro 6d-temp passenger vehicle	21
Utilization of scattering and absorption-based particulate matter sensors in the environment impacted by residential wood combustion	21
On black carbon emission from automotive disc brakes	21
Particle emissions from mobile sources: Discussion of ultrafine particle emissions and definition	20
New explicit correlations for the critical sticking velocity and restitution coefficient of small adhesive particles: A finite element study and validation	19
Efficacy of single pass UVC air treatment for the inactivation of coronavirus, MS2 coliphage and Staphylococcus aureus bioaerosols	18
Aerosol hazards in operating rooms: A review of numerical and experimental studies	18
Regional deposition of the allergens and micro-aerosols in the healthy human nasal airways	18
Photochemistry of single optically trapped oleic acid droplets	18
Overview of methods to characterize the mass, size, and morphology of soot	18
Assessment of a regulatory measurement system for the determination of the non-volatile particulate matter emissions from commercial aircraft engines	18
Solid particle number emissions of 56 light-duty Euro 5 and Euro 6 vehicles	17
Atmospheric-pressure particle mass spectrometer for investigating particle growth in spray flames	17
Computational investigation of prolonged airborne dispersion of novel coronavirus-laden droplets	17
Technical note: Using k-means to identify soot aggregates in transmission electron microscopy images	17
Investigation on sub-23 nm particles and their volatile organic fraction (VOF) in PFI/DI spark ignition engine fueled with gasoline, ethanol and a 30 %v/v ethanol blend	17
Risk assessment and mitigation of airborne disease transmission in orchestral wind instrument performance	17
Tutorial: Aerosol characterization with digital in-line holography	17
Computational analysis of a 3D mucociliary clearance model predicting nasal drug uptake	17
Simultaneous temporal, spatial and size-resolved measurements of aerosol particles in closed indoor environments applying mobile filters in various use-cases	16
Investigating the effectiveness of condensation sink based on heterogeneous nucleation theory	16
Helical fluid-particle flow dynamics for controlling micron-particle deposition in a representative human upper lung-airway model	16
Orientation of non spherical prolate dust particles moving vertically in the Earth’s atmosphere	16
Tutorial: The discrete-sectional method to simulate an evolving aerosol	16
Background PM10 atmosphere: In the seek of a multifractal characterization using complex networks	16
A comprehensive review of particle loading models of fibrous air filters	16
3D printer particle emissions: Translation to internal dose in adults and children	16
Technical note: Understanding the effect of COVID-19 on particle pollution using a low-cost sensor network	15

Impact of the competition between aggregation and surface growth on the morphology of soot particles formed in an ethylene laminar premixed flame	15
Multispecies aerosol evolution and deposition in a human respiratory tract cast model	15
Morphology of particulate deposits formed on a single filter fibre by exposure to mixed aerosol flow	15
The effect of incident angle on the rebound behavior of micro-particle impacts	15
An experimental investigation on the settling velocity and drag coefficient of micrometer-sized natural, IG-110, NG-CT-10 and A3-3 graphite particles	15
Estimation of the deposition of ultrafine 3D printing particles in human tracheobronchial airways	15
Evaluation of the polyhedral mesh style for predicting aerosol deposition in representative models of the conducting airways	15
Particulate emissions of heavy duty diesel engines measured from the tailpipe and the dilution tunnel	15
Antibiotic resistance genes and antibiotic sensitivity in bacterial aerosols and their comparisons with known respiratory pathogens	14
Particle synthesis by rapid expansion of supercritical solutions (RESS): Current state, further perspectives and needs	14
Deposition features of inhaled viral droplets may lead to rapid secondary transmission of COVID-19	13
An effect of fibrous filters modification with MTMS aerogel structure on oil mist filtration dynamics	13
Exceeding a resolving power of 50 for virus size determination by differential mobility analysis	13
Importance of cloud motion and two-way momentum coupling in the transport of pharmaceutical nasal sprays	13
Improvement of aerosol spray scavenging efficiency with water mist	13
Air quality during and after the Commonwealth Games 2018 in Australia: Multiple benefits of monitoring	13
A molecular dynamics study of collisional heat transfer to nanoclusters in the gas phase	13
From monomers to agglomerates: A generalized model for characterizing the morphology of fractal-like clusters	13
Coated soot particles with tunable, well-controlled properties generated in the laboratory with a miniCAST BC and a micro smog chamber	13
The effect of nasal airway obstruction on the dispersion and deposition of inhaled volatile droplets in the human nasal cavity: A numerical study	13
A comparative study on effective density, shape factor, and volatile mixing of non-spherical particles using tandem aerodynamic diameter, mobility diameter, and mass measurements	12
Influence of agglomerate morphology on micro cold spray of Ag nanopowders	12
Numerical simulation of the aerosol formation and spreading in an air-conditioned train compartment	12
Simultaneous measurement of spatially resolved particle emissions in a pilot plant scale baghouse filter applying distributed low-cost particulate matter sensors	12
Effect of the carrier gas on the structure and composition of Co–Ni bimetallic nanoparticles generated by spark ablation	12
Technical note: Impact of face covering on aerosol transport patterns during coughing and sneezing	12
Assessment of air quality in car cabin in and around Paris from on-board measurements and comparison with 2007 data	12
Impact of washing cycles on the performances of face masks	12
Effects of agglomerate characteristics on their collision kernels in the free molecular regime	12
Evidence of inter-particles collision effect in airflow resuspension of poly-dispersed non-spherical tungsten particles in monolayer deposits	12
Tutorial: Langevin Dynamics methods for aerosol particle trajectory simulations and collision rate constant modeling	12
On the reactive coagulation of incipient soot nanoparticles	11
The application of statistical shape modeling for lung morphology in aerosol inhalation dosimetry	11
Stochastic population balance methods for detailed modelling of flame-made aerosol particles	11
Effective density and metals content of particle emissions generated by a diesel engine operating under different marine fuels	11
Aerosol dynamics simulations of the anatomical variability of e-cigarette particle and vapor deposition in a stochastic lung	11
Spray characteristics from nasal spray atomization	11
Aerosol analysis using quantum cascade laser infrared spectroscopy: Application to crystalline silica measurement	11
Evaluation of viral RNA extraction methods to detect porcine reproductive and respiratory syndrome and influenza A viruses from used commercial HVAC air filters from swine farms	11
Monodisperse droplets and particles by efficient neutralization of electrosprays	11
Size-resolved aerosol emissions from lignocellulosic biomass and biomass constituent pyrolysis under variable dilution temperatures	10
Tutorial: Dynamic organic growth modeling with a volatility basis set	10
Assessment of stochastic models for predicting particle transport and deposition in turbulent pipe flows	10
Effect of flow geometry on the nanoparticle output of a spark discharge generator	10
A hybrid in vitro in silico framework for albuterol delivery through an adult ventilator circuit to a patient-specific lung airway model	10
Towards a concentration closure of sub-6 nm aerosol particles and sub-3 nm atmospheric clusters	10
Significance of sources and size distribution on calibration of low-cost particle sensors: Evidence from a field sampling campaign	10
A molecular dynamics survey study of impact-induced amorphization in yttria nanoparticles	10
Detection of SARS-CoV-2 in the air in Indian hospitals and houses of COVID-19 patients	10
The standard operating procedure for Airmodus Particle Size Magnifier and nano-Condensation Nucleus Counter	10
Characterization of mesoscale inhomogeneity in nonwovens and its relevance in the filtration of fine mists	10
Combining instrument inversions for sub-10 nm aerosol number size-distribution measurements	9
Photochemical transformation and secondary aerosol formation potential of Euro6 gasoline and diesel passenger car exhaust emissions	9
Using two-dimensional distributions to inform the mixing state of soot and salt particles produced in gas flares	9
Influence of alveolar mixing and multiple breaths of aerosol intake on particle deposition in the human lungs	9
The impact of moderately absorbing aerosol on surface sensible, latent, and net radiative fluxes during the summer of 2015 in Central Europe	9
Characterization of a Kanomax® fast condensation particle counter in the sub-10 nm range	9
Characterization techniques for heterogeneous nucleation from the gas phase	9
On-line compositional measurements of AuAg aerosol nanoparticles generated by spark ablation using optical emission spectroscopy	9
Effect of breathing profiles on nebuliser drug delivery targeting the paranasal sinuses in a post-operative nasal cavity	9
Low-pressure flame synthesis of carbon-stabilized TiO2-II (srilankite) nanoparticles	9
Influence of aerosol electrical charging state and time of use on the filtration performance of some commercial face masks for 10–150 nm particles	9
Generating an aerosol of homogeneous, non-spherical particles and measuring their bipolar charge distribution	9
Laboratory evaluation of the Alphasense OPC-N3, and the Plantower PMS5003 and PMS6003 sensors	9
Inter-species variabilities of droplet transport, size change, and deposition in human and rat respiratory systems: An in silico study	9
Particulate emissions from turbulent diffusion flames with entrained droplets: A laboratory simulation of gas flaring emissions	8
The fractal characteristics of atmospheric coated soot: Implication for morphological analysis	8
Sampling and conditioning of engine blow-by aerosols for representative measurements by optical particle counters	8
Measuring electrostatic charge on pneumatically generated spray drops	8
Deposition characteristics of soot and tire-wear particles on urban tree leaves	8
A hybrid CFD – Deep Learning methodology to improve the accuracy of cut-off diameter prediction in coarse-grid simulations for cyclone separators	8
Novel inertial impactor for nanoparticle classification without particle loading effect	8
Dynamics of aerosol generation and release – Dry powder inhaler performance considerations	8
Characterising the silver particle generator; a pathway towards standardising silver aerosol generation	8
Experimental study of particle deposition on patterned microstructured surfaces in a chamber environment	8
Clustering and collision of Brownian particles in homogeneous and isotropic turbulence	8
Electrospray plume evolution: Influence of drag	8
A new coupling setup of DMA, CPC and sp-ICP-MS with increased versatility	8
Inhaled aerosol dosimetry: Research-related needs and recommendations	8
Deformation and film formation mechanisms during high velocity impact of silicon carbide nanoparticles	8

Air change per hour and inlet area: Effects on ultrafine particle concentration and thermal comfort in an operating room	8
Effect of low-cost recirculating portable air filtration on aerosol particle deposition and concentration in a conference room: Experiment, theory, and simulation comparison	8
Application of the “Rock'n’Roll” (RNR) resuspension model with non-zero slip velocities on particle and substrate surfaces	7
Development and optimization of Stationary Electrostatic Bioaerosol Sampler (SEBS) for viable and culturable airborne microorganisms	7
Multiplexed electrospray emitters fabricated by rapid laser micromachining	7
The generalized quadrature method of moments	7
An effective PBPK model predicting dissolved drug transfer from a representative nasal cavity to the blood stream	7
Investigation of droplet size distribution for vibrating mesh atomizers	7
Modeling of the electrical interaction between desert dust particles and the Earth’s atmosphere	7
Three-dimension soft X-ray tomographic reconstruction of particulates emitted from a diesel engine	7
Experimental and atomistic study of high speed collisions of gold nanoparticles with a gold substrate: Validation of interatomic potentials	7
Macroscale simulation of particle loading in electrostatically charged filters	7
Simulations of TiO2 nanoparticles synthesised off-centreline in jet-wall stagnation flames	7
A critical note on filtering-face-piece filtration efficiency determination applying EN 149	7
Characterization of atmospheric-pressure spark generated atomic silver and gold clusters by time-of-flight mass spectrometry	7
Multi-fidelity uncertainty quantification of particle deposition in turbulent pipe flow	7
Online ion mobility spectrometry of nanoparticle formation by non-thermal plasma conversion of metal salts in liquid aerosol droplets	7
A singularly narrow 29 nm aerosol size standard based on the ΦX174 bacteriophage	7
Effect of aerosol sampling conditions on PM2.5 sampling accuracy	7
Droplet size distribution, atomization mechanism and dynamics of dental aerosols	7
Gas and ceramic particle velocities for micro-cold spray	7
A novel approach for reducing uncertainties in soot volume fraction estimates from light extinction measurements	7
In Vitro to ex Vivo/In Vivo Correlation (IVIVC) of dissolution kinetics from inhaled particulate solutes using air/blood barrier models: Relation between in vitro design, lung physiology and kinetic o	7
Multi-year analysis of aerosol optical properties at various timescales using AERONET data in tropical West Africa	7
A novel method to investigate detachment of particulate structures from an elastic single fiber at low gas flow velocities	7
A numerical tool to calculate ion mobility at arbitrary fields from all-atom models	6
The influence of cooling rate on condensation of iron, aluminum, and uranium oxide nanoparticles	6
Virtual impaction in compressible flows with pressure recovery	6
Hydrogen-assisted spark generation of silver nanoparticles: The effect of hydrogen content on the signal intensity in surface-enhanced Raman spectroscopy	6
A consistent formation free energy definition for multicomponent clusters in quantum thermochemistry	6
Automated bidirectional coupling of multiscale models of aerosol dosimetry: Validation with subject-specific deposition data	6
Translating nanoparticle dosimetry from conventional in vitro systems to occupational inhalation exposures	6
Shaping electrospray deposition profile by a quadrupole: From circular to elliptical patterns	6
Chemical characterization of the water-soluble organic nitrogen in the maritime aerosol	6
Scavenging of laser-generated aerosols with electrostatic-charged spray droplets	6
Approximated expression of the hygroscopic growth factor for polydispersed aerosols	6
Aerosolization triggers immediate antibiotic resistance in bacteria	6
A sheathed virtual impactor – Microseparator for improved separation of sub- and supercritical sized particles	6
Improving quantitative analysis of spark-induced breakdown spectroscopy: Multivariate calibration of metal particles using machine learning	6
Comparison and evaluation of enumeration methods for measurement of fungal spore emission	6
A simple approach to simulate corona-charged electret filters	6
Influence of large seed particle on acoustic particle interaction dynamics: A numerical study	6
Numerical study of effects of device design on drug delivery efficiency for an active dry powder inhaler	6
Prediction of the transport, deposition, and absorption of multicomponent E-cigarette aerosols in a subject-specific mouth-to-G10 human respiratory system	6
A tutorial guide on new particle formation experiments using a laminar flow reactor	6
Investigation of aerosol generation through laser cleaning of various surfaces and optimization of mist & spray scavenging	5
The effect of the mucus layer and the inhaled air conditions on the droplets fate in the human nasal cavity: A numerical study	5
Aerosol regional deposition of electronic cigarette emissions using an original ex vivo respiratory model	5
Tutorial: Guide to error propagation for particle counting measurements	5
Retrieval of refractive indices of ten volcanic ash samples in the infrared, visible and ultraviolet spectral region	5
Computational modelling of an aerosol extraction device for use in COVID-19 surgical tracheotomy	5
Numerical and experimental investigation on the performance of a ventilated chamber for low-cost PM sensor calibration	5
Lung deposition versus inhalable sampling to estimate body burden of welding fume exposure: A pilot sampler study in stainless steel welders	5
Cluster activation studies with a diffusive condensation particle counter: Effect of chemical composition	5
Effects of soot volume fraction on local gas heating and particle sizing using laser induced incandescence	5
Optimization of swirler type dry powder inhaler device design – Numerical investigation on the effect of dimple shape, inlet configuration and mouthpiece constriction	5
Singularly narrow size distributions of 200 nm polystyrene latex spheres determined by high resolution mobility analysis	5
A quantitative criterion to predict atomic disordering during high velocity nanoparticle impact	5
A numerical study of bipolar charging and neutralization of ultrafine particles with uniformly generated heterogeneous ions	5
Development of computational fluid dynamics methodology for characterization of exhalation delivery system performance in a nasal airway with Draf-III surgery	5
Performance characteristics of a small scale cyclone separator operated in different flow regimes	5
Applicability of benchtop multi-wavelength polar photometers to off-line measurements of the Multi-Angle Absorption Photometer (MAAP) samples	5
AeroSolved: Computational fluid dynamics modeling of multispecies aerosol flows with sectional and moment methods	5
Dissipation and adhesion in collisions between amorphous FeO nanoparticles	5
Retrieval of aerosol properties from in situ, multi-angle light scattering measurements using invertible neural networks	5
Activation of sub-3 nm organic particles in the particle size magnifier using humid and dry conditions	5
Mobility analysis of nanocluster formation and growth from titanium tetraisopropoxide in a flow tube reactor	5
Aerosol deposition in the pulmonary acinar region: Influence of wall motion and interparticle collisions	5
Temperature and pressure effects on the performance of the portable TSI 3007 condensation particle counter: Implications on ground and aerial observations	5
Electrostatic precipitation of exhaled particles for tensiometric examination of pulmonary surfactant	5
High resolution characterization of a sheathed axisymmetric variable supersaturation condensation particle sizer	5
Adhesion forces of radioactive particles measured by the Aerodynamic Method–Validation with Atomic Force Microscopy and comparison with adhesion models	5
Modeling particle-particle binary coagulation rate constants for spherical aerosol particles at high volume fractions using Langevin Dynamics simulations	4
On the interplay between pressure and gravitational forces in coalescing filters	4
Quantification of soot deposit on a resistive sensor: Proposal of an experimental calibration protocol	4
A numerical study of effects of aerosol particles on the electric activities of a thunderstorm with a 1.5D aerosol-cloud bin model	4
Examining chemical composition of gas turbine-emitted organic aerosol using positive matrix factorisation (PMF)	4
Minimizing the coincidence error in particle size spectrometers with digital signal processing techniques	4
Effect of vessel size scale on the aerosol spray scavenging efficiency with water mist	4
Application of finite element method to General Dynamic Equation of Aerosols – Comparison with classical numerical approximations	4
Nanofibrous aerosol sample filter substrates: Design, fabrication, and characterization	4
Numerical scattering simulations for estimating soot aggregate morphology from nephelometer scattering measurements	4
Lab-on-printed circuit board based water harvesting condensation particle counter for ubiquitous monitoring of airborne ultrafine particles	4
Effects of the test aerosol on the performance of periodic technical inspection particle counters	4
Internal mixing air-assisted spray nozzle for large droplets: Experimental measurements and numerical simulations	4
Online shape and density measurement of single aerosol particles	4
Horizontal injection spray drying aerosol generator using an ultrasonic nozzle with clean counter flow	4
Determining real-time mass deposition with a quartz crystal microbalance in an electrostatic, parallel-flow, air-liquid interface exposure system	4
PPWD-SDEP-IC monitoring system for atmospheric precursor inorganic gases and PM2.5 water-soluble ions	4
Comparison of the service life of an automotive cabin air filter under dust loading conditions of the laboratory environment and on-road driving	4
Silicon nanocluster anion-argon cation recombination via hybrid continuum-molecular dynamics calculations	4
Multi-mechanism theory of aerosol capture by fibrous filters, including fiber diameter/orientation dispersity and particle morphology effects. Preliminary tests vs. data for mobility-selected submicro	4
Modelling nanoparticle agglomeration in the transition regime: A comparison between detailed Langevin Dynamics and population balance calculations	4
Comparison of models to predict the collection efficiency of an axial cyclone with a spindle vane	4
Effect of walls with large scale roughness in deposition efficiency for 90-degree square bend configurations	4