Japanese Journal of Applied Physics

Article	Citations
Physical reservoir computing—an introductory perspective	197
Recent advances and future prospects in energy harvesting technologies	69
Review on ferroelectric/polar metals	53
InGaN-based red light-emitting diodes: from traditional to micro-LEDs	44
Beyond silicene: synthesis of germanene, stanene and plumbene	39
Advances in color-converted micro-LED arrays	38
Review of plasma-based water treatment technologies for the decomposition of persistent organic compounds	37
High-NA EUV lithography: current status and outlook for the future	35
Effect of field cooling AC poling on electrical and physical properties for Pb(Mg1/3Nb2/3)O3-PbTiO3-based single crystals manufactured by a continuous-feedi	30
Design and characterization of a low-optical-loss UV-C laser diode	30
A possible origin of the large leakage current in ferroelectric Al1−x Sc x N films	29
Photoelectron Momentum Microscope at BL6U of UVSOR-III synchrotron	29
Impact of carbon in the buffer on power switching GaN-on-Si and RF GaN-on-SiC HEMTs	27
Recent progress of Ga2O3 power technology: large-area devices, packaging and applications	26
In-plane orientation control of (001) κ-Ga2O3 by epitaxial lateral overgrowth through a geometrical natural selection mechanism	26
Impact of atmospheric pressure plasma treated seeds on germination, morphology, gene expression and biochemical responses	25
Enhanced electric property of relaxor ferroelectric crystals with low AC voltage high-temperature poling	25
A spurious-free, steep band rejection filter using a LiTaO3/quartz heteroacoustic layer surface acoustic wave resonator	24
High-performance surface acoustic wave devices using composite substrate structures	24
On the thickness scaling of ferroelectricity in Al0.78Sc0.22N films	24
Recent progress in ferromagnetic semiconductors and spintronics devices	24
Fabrication and characterization of CH3NH3PbI3 solar cells with added guanidinium and inserted with decaphenylpentasilane	23
Cold sintering, enabling a route to co-sinter an all-solid-state lithium-ion battery	22
GaN substrates having a low dislocation density and a small off-angle variation prepared by hydride vapor phase epitaxy and maskless-3D	22
Future of 300 GHz band wireless communications and their enabler, CMOS transceiver technologies	22

Evaluation methods for materials for power ultrasonic applications	21
Efficiency improvement of AlGaN-based deep-ultraviolet light-emitting diodes and their virus inactivation application	21
Recent progress on AC poling of relaxor-PbTiO3 ferroelectric single crystals: a review	21
Fundamental aspects, recent progress and future prospects of inorganic scintillators	20
Potential of AgBiI4 rudorffites for indoor photovoltaic energy harvesters in autonomous environmental nanosensors	20
Nanoscale structural analysis of Bi0.5Na0.5TiO3	20
Strain-induced tunable optoelectronic properties of inorganic halide perovskites APbCl3 (A = K, Rb, and Cs)	20
Estimation of speed of sound using coherence factor and signal-to-noise ratio for improvement of performance of ultrasonic beamformer	19
Analysis of a high-power resonant-tunneling-diode terahertz oscillator integrated with a rectangular cavity resonator	19
Polarization control of ScAlN, ZnO and PbTiO3 piezoelectric films: application to polarization-inverted multilayer bulk acoustic wave and surface acoustic wave devices	19
Design for high-quality factor of piezoelectric-on-silicon MEMS resonators using resonant plate shape and phononic crystals	19
Crystal growth and characterization of topological insulator BiSb thin films by sputtering deposition on sapphire substrates	19
Why do electron traps at E C –0.6 eV have inverse correlation with carbon concentrations in n-type GaN layers?	18
Slip planes in monoclinic β-Ga2O3 revealed from its {010} face via synchrotron X-ray diffraction and X-ray topography	18
Novel electro-active shape memory polymers for soft actuators	18
Impact of annealing environment on electrical properties of yttrium-doped hafnium zirconium dioxide thin films prepared by the solution process	18
High-speed imaging of defects in thin plate by scanning elastic wave source technique using an airborne ultrasound phased array	18
Corrosion mechanism analysis of the front-side metallization of a crystalline silicon PV module by a high-temperature and high-humidity test	18
Scintillation light yield of Tb:Sr2Gd8(SiO4)6O2	18
Dosimetric properties of Tb-doped MgAl2O4 single crystals	18
Ultrasound-based lipid content quantification using double Nakagami distribution model in rat liver steatosis	17
Structural characterization of defects in EFG- and HVPE-grown β-Ga2O3 crystals	17
Measurement of electron temperature and density of atmospheric-pressure non-equilibrium argon plasma examined with optical emission spectroscopy	17
In-materioneuromimetic devices: dynamics, information processing and pattern recognition	17
Function of plasma and electrostatics for keeping quality of agricultural produce in post-harvest stage	17
CuInSe2 and related I–III–VI2 chalcopyrite compounds for photovoltaic application	16
Review of numerical simulation of atmospheric-pressure non-equilibrium plasmas: streamer discharges and glow discharges	16
Multiple aerial imaging by use of infinity mirror and oblique retro-reflector	16
Comparative study of piston mode designs for temperature-compensated surface acoustic wave resonators using SiO2/LiNbO3 structure	16
Estimation of viscoelasticity of radial artery via simultaneous measurement of changes in pressure and diameter using a single ultrasound probe	16
Wound treatment by low-temperature atmospheric plasmas and issues in plasma engineering for plasma medicine	16
Application of machine learning to stochastic effect analysis of chemically amplified resists used for extreme ultraviolet lithography	16
Thermodynamic and experimental studies of β-Ga2O3 growth by metalorganic vapor phase epitaxy	16
Direct visualization of a strain-induced dynamic stress network in a SEBS thermoplastic elastomer with in situ AFM nanomechanics	16
Overcoming the excessive compressive strain in AlGaN epitaxy by introducing high Si-doping in AlN templates	16
The quenching effects for depolarization temperature of (Bi0.5Na0.5)TiO3ceramics with Mn dopants	15
Verification of the influence of liver microstructure on the evaluation of shear wave velocity	15
Toward technological contributions to remote operations in the decommissioning of the Fukushima Daiichi Nuclear Power Station	15
A solidly mounted, high frequency, thickness shear mode bulk acoustic wave resonator using X-LiTaO3 thin plate and SiO2/Ta multilayer acoustic films	15
Resist thickness dependence of line width roughness of chemically amplified resists used for electron beam lithography	15
Halide perovskite memtransistor enabled by ion migration	15
Plan-view TEM observation of a single-domain κ-Ga2O3 thin film grown on ε-GaFeO3 substrate using GaCl3 precursor by mist chemical vapor deposition	14
Initial nucleation scheme of Ga2O3 on (0001) sapphire by mist CVD for the growth of α-phase	14
Fabrication of AlN templates by high-temperature face-to-face annealing for deep UV LEDs	14
Computational analysis of radiative Williamson hybrid nanofluid comprising variable thermal conductivity	14
Field cycling behavior and breakdown mechanism of ferroelectric Al0.78Sc0.22N films	14
Analysis of longitudinal leaky surface acoustic waves on LiNbO3/amorphous layer/quartz structure	14
Evolving conductive polymer neural networks on wetware	14
Evolution of patterning materials towards the Moore’s Law 2.0 Era	14
Weakly nonlinear theory on ultrasound propagation in liquids containing many microbubbles encapsulated by visco-elastic shell	14

Hodgkin–Huxley equations implies Edge of Chaos Kernel	14
High-quality InP/SOI heterogeneous material integration by room temperature surface-activated bonding for hybrid photonic devices	14
Fully roll-to-roll gravure printed electronics: challenges and the way to integrating logic gates	14
Mechanism of pulsed electric field enzyme activity change and pulsed discharge permeabilization of agricultural products	14
Time response characteristics of a highly sensitive barometric pressure change sensor based on MEMS piezoresistive cantilevers	14
Development of optical resolution photoacoustic microscopy with sub-micron lateral resolution for visualization of cells and their structures	14
Basic study on estimation method of wall shear stress in common carotid artery using blood flow imaging	13
Recent progress on antimonene: from theoretical calculation to epitaxial growth	13
Functional nitrogen science based on plasma processing: quantum devices, photocatalysts and activation of plant defense and immune systems	13
Hydrogen passivation for reduction of SiO2/Si interface state density using hydrocarbon-molecular-ion-implanted silicon wafers	13
Recent progress in the macroscopic orientation of semiconducting polymers by floating film transfer method	13
Performance of Ag–Ag2S core–shell nanoparticle-based random network reservoir computing device	13
Thermal stability of α-(AlxGa1–x)2O3films grown on c-plane sapphire substrates with an Al composition up to 90%	13
Plasmonics—high-speed photonics for co-integration with electronics	13
X- and γ-ray response of Sm-doped SrBr2 crystalline scintillators emitting red-NIR photons	13
Design of automatic detection algorithm for dislocation contrasts in birefringence images of SiC wafers	13
III-nitride optoelectronic devices containing wide quantum wells—unexpectedly efficient light sources	13
Impact of threading dislocations in GaN p–n diodes on forward I–V characteristics	13
Dielectric, piezoelectric, and spurious mode vibration properties by four types of waveforms AC poling for Pb(Mg1/3Nb2/3)O3-PbTiO3 single crystals	13
Electrical properties of yttrium-doped hafnium-zirconium dioxide thin films prepared by solution process for ferroelectric gate insulator TFT application	13
Advancing flexible electronics and additive manufacturing	13
Recent development of UV-B laser diodes	13
Saturated detection efficiency of single-photon detector based on an InGaAs/InP single-photon avalanche diode gated with a large-amplitude sinusoidal voltage	13
Investigation on the temperature coefficient of frequency performance of LiNbO3 on quartz and glass surface acoustic wave resonators	13
Influence of silicon wafer surface roughness on semiconductor device characteristics	13
Enhancement of leaky surface acoustic wave harmonics excitation using bonded dissimilar-material structures	13
Swelling and dissolution kinetics of poly(4-hydroxystyrene) in tetrabutylammonium hydroxide (TBAH) aqueous solutions studied by quartz crystal microbalance (QCM) method—in comparison with tetramethyla	12
Fabrication of Si photonic waveguides by electron beam lithography using improved proximity effect correction	12
Enhanced in-plane uniformity and breakdown strength of diamond Schottky barrier diodes fabricated on heteroepitaxial substrates	12
Technical trend of power electronics systems for automotive applications	12
Emission properties of intrinsic and extrinsic defects in Cu2SnS3 thin films and solar cells	12
Luminescence and scintillation properties of Cs2ZnCl4 and Cs3ZnCl5	12
Experimental and numerical analysis of the effects of ion bombardment in silicon oxide (SiO2) plasma enhanced atomic layer deposition (PEALD) processes	12
Recent progress of organic scintillators	12
Sensitive label-free immunoglobulin G detection using a MEMS quartz crystal microbalance biosensor with a 125 MHz wireless quartz resonator	12
Fabrication of heterojunction crystalline Si solar cells with BaSi2 thin films prepared by a two-step evaporation method	12
Ferroelectric phase formation for undoped ZrO2 thin films by wet O2 annealing	12
Solvation structure on water-in-salt/mica interfaces and its molality dependence investigated by atomic force microscopy	12
Analyses of microstructure at degraded local area in Ni-multilayer ceramic capacitors under highly accelerated life test	12
Experimental analysis of linear and nonlinear ultrasonic scatterings at closed fatigue crack using fixed-voltage fundamental wave amplitude difference with radarlike display	12
Etching-induced damage in heavily Mg-doped p-type GaN and its suppression by low-bias-power inductively coupled plasma-reactive ion etching	12
Indium oxide and indium-tin-oxide channel ferroelectric gate thin film transistors with yttrium doped hafnium-zirconium dioxide gate insulator prepared by chemical solution process	12
Coulomb-limited mobility in 4H-SiC MOS inversion layer as a function of inversion-carrier average distance from MOS interface	12
Ferroelectricity of Dion–Jacobson layered perovskites CsNdNb2O7 and RbNdNb2O7	12
Verification of influence of tail states and interface states on sub-threshold swing of Si n-channel MOSFETs over a temperature range of 4–300 K	11
Broadband piston mode operation of solidly mounted resonator employing A1 Lamb mode on lithium niobate	11
Characterization of dislocation of halide vapor phase epitaxial (001) β-Ga2O3 by ultrahigh sensitive emission microscopy and synchrotron X-ray topography and its influence on Sch	11
SiO2/GaN interfaces with low defect densities and high breakdown electric fields formed by plasma-enhanced atomic layer deposition	11
Rapid and accurate identification of colon cancer by Raman spectroscopy coupled with convolutional neural networks	11
Screw dislocations on $\left\{1\bar{2}12\right\}$ pyramidal planes induced by Vickers indentation in HVPE GaN	11
Development of large size crystal growth technology of oxide eutectic scintillator and a proto-type Talbot–Lau imaging system	11
Designing a bileg silicon-nanowire thermoelectric generator with cavity-free structure	11
Growth of 6Li-enriched LiCl/BaCl2 eutectic as a novel neutron scintillator	11
Study of open circuit voltage loss mechanism in perovskite solar cells	11
Systems and circuits for AI chips and their trends	11
Influence of deposition rate on magnetic properties of inverse-spinel NiCo2O4 epitaxial thin films grown by pulsed laser deposition	11
Optimization of displacement Talbot lithography for fabrication of uniform high aspect ratio gratings	11
UV inactivation of viruses in water: its potential to mitigate current and future threats of viral infectious diseases	11
Analysis of leaky surface acoustic wave characteristics propagating on high piezoelectric ScAlN film/high velocity quartz substrate	11
Application of ultraviolet light sources for in vivo disinfection	11
Velocity reduction of incredible high-performance surface acoustic wave using heavy metal electrodes	11
Estimation of shifts of therapeutic carbon-ion beams owing to cavities in a polyethylene target by measuring prompt X-ray images	11
Rod drive type ultrasonic linear motor with quadruped stator	11
Characterization of laser-induced vibration on concrete surface toward highly efficient laser remote sensing	11
Speckle reduction of medical ultrasound images using deep learning with fully convolutional network	11
Design considerations for normally-off operation in Schottky gate p-GaN/AlGaN/GaN HEMTs	11
Measurement of complex shear viscosity up to 3 GHz using an electrodeless AT-cut quartz transducer	11
Effect of (AlGa)2O3 back barrier on device characteristics of β-Ga2O3 metal-oxide-semiconductor field-effect transistors with Si-implanted channel	11
Speed of sound evaluation considering spatial resolution in a scanning acoustic microscopy system capable of observing wide spatial area	11
Flexible ammonia sensor integrated with polyaniline/zinc oxide/graphene composite membrane materials	11
Nearly Fermi-level-pinning-free interface in metal/heavily-doped SiC Schottky structures	11
Highly coupled leaky surface acoustic wave on hetero acoustic layer structures based on ScAlN thin films with a c-axis tilt angle	11
Advances in design and manufacture of stretchable electronics	11
Direct high-temperature growth of single-crystalline GaN on ScAlMgO4 substrates by metalorganic chemical vapor deposition	11
Pattern formation dynamics in a Memristor Cellular Nonlinear Network structure with a numerically stable VO2 memristor model	11
Relation between thresholds of free radical generation and atomization under ultrasound exposure	11
Effect of a silicon nitride film on the potential-induced degradation of n-type front-emitter crystalline silicon photovoltaic modules	11
Relation between statistical properties of sound speed distribution and average sound speed estimation	10
Quantification of wafer bond strength under controlled atmospheres	10
Design of non-circular membranes metasurfaces for broadband sound absorption	10

Insights into normothermic treatment with direct irradiation of atmospheric pressure plasma for biological applications	10
Multi-degrees-of-freedom swimmer using an ultrasonic longitudinal transducer	10
High-performance AlGaN-based deep ultraviolet light-emitting diodes with different types of InAlGaN/AlGaN electron blocking layer	10
Fixed-charge generation in SiO2/GaN MOS structures by forming gas annealing and its suppression by controlling Ga-oxide interlayer growth	10
Preparation of porous Mo-doped VO2 films via atomic layer deposition and post annealing	10
Improved evaluation of backscatter characteristics of soft tissue using high-frequency annular array	10
Thermal stability of self-polarization in a (K,Na)NbO3 film prepared by the hydrothermal method	10
Micrometer-scale WS2 atomic layers grown by alkali metal free gas-source chemical vapor deposition with H2S and WF6 precursors	10
Analysis of carrier injection efficiency of AlGaN UV-B laser diodes based on the relationship between threshold current density and cavity length	10
Mechanical properties and dislocation dynamics in β-Ga2O3	10
Crystal structure, ferroelectric and piezoelectric properties of epitaxial (1−x)(Bi0.5Na0.5)TiO3–x(Bi0.5K0.5)TiO3 films	10
Numerical and experimental study of acoustic wave propagation in glass plate/water/128YX-LiNbO3 structure	10
Electrical resistivity and thermopower of hole-doped delafossite CuCoO2 polycrystals	10
Dependency of direct and inverse transverse piezoelectric properties on composition in self-polarized epitaxial (KxNa1−x)NbO3films grown via a hydrotherm	10
Single Shockley stacking fault expansion from immobile basal plane dislocations in 4H-SiC	10
Time-frequency modulation based mimicking dolphin whistle for covert underwater acoustic communication	10
Photoluminescence and scintillation characteristics of (C6H5C n H2n NH3)2PbBr4	10
Quantitative evaluation of ultrasonic cleaning ability using acoustic cavitation signal	10
Linear electro-optic effect in ferroelectric HfO2-based epitaxial thin films	10
Advancements in MEMS technology for medical applications: microneedles and miniaturized sensors	10
Infrared LED marker for target recognition in indoor and outdoor applications of optical wireless power transmission system	10
Development of multi-degree-of-freedom noncontact transportation using holding force in near-filed acoustic levitation and consideration of factors of unstable operation	10
Transverse energy confinement and resonance suppression in SAW resonators using low-cut lithium tantalate	10
Mid-air acoustic tweezers for non-contact pick up using multi-channel controlled ultrasonic transducer arrays	10
Power device breakdown mechanism and characterization: review and perspective	10
Design of a planar-type uni-leg SiGe thermoelectric generator	10
Growth of microcrystalline diamond films after fabrication of GaN high-electron-mobility transistors for effective heat dissipation	10
3.4 GHz strip-type thickness shear mode solidly-mounted bulk acoustic wave resonator using X-cut LiTaO3	10
Influence of hygrothermal stress on potential-induced degradation for homojunction and heterojunction crystalline Si photovoltaic modules	10
Preparation of 1 μm thick Y-doped HfO2 ferroelectric films on (111)Pt/TiO x /SiO2/(001)Si substrates by a sputtering method and their	9
Comparative investigation of coherence factor weighting methods for an annular array photoacoustic microscope	9
Novel characterization method for the nitrogen doping concentration in heavily nitrogen-doped 4H-SiC crystals by Raman scattering microscopy	9
Proposal and demonstration of LED optical wireless power-transmission systems for battery-operated small electronic devices	9
Moving sound source with an arbitrary trajectory in the two-dimensional finite-difference time-domain method	9
Active control of surface profile by magnetic micropillar arrays	9
Tunneling oxide engineering for improving retention in nonvolatile charge-trapping memory with TaN/Al2O3/HfO2/SiO2/Al2O3/SiO2	9
Study of loss mechanisms in temperature compensated surface acoustic wave devices based on finite element method analysis using hierarchical cascading technique	9
A simulation study on memory characteristics of InGaZnO-channel ferroelectric FETs with 2D planar and 3D structures	9
Mid-infrared cavity ring-down spectroscopy using DFB quantum cascade laser with optical feedback for radiocarbon detection	9
Pilot demonstration of correlation-domain distributed temperature sensing using forward Brillouin scattering	9
Effect of surface free energy of organic underlayer on the dissolution kinetics of poly(4-hydroxystyrene) film in tetramethylammonium hydroxide aqueous developer	9
Electric-field-induced structural changes for cubic system of lead-free and lead-based perovskite-type oxides	9
Nanowire gate-all-around MOSFETs modeling: ballistic transport incorporating the source-to-drain tunneling	9
Magneto-optical surface plasmon resonances on perpendicular magnetic thin films consisting of CoPt/ZnO/Ag stacked nanolayers	9
Silicon-based low-dimensional materials for thermal conductivity suppression: recent advances and new strategies to high thermoelectric efficiency	9
Science-based, data-driven developments in plasma processing for material synthesis and device-integration technologies	9
Non-destructive visualization of short circuits in lithium-ion batteries by a magnetic field imaging system	9
Optically stimulated luminescence dosimeters: principles, phosphors and applications	9
Neutron-induced thermoluminescence properties of Tb3+-doped Ca2B2O5ceramics	9
Welding characteristics of coated twisted wire and copper plate by ultrasonic vibration source using a transmission rod with helical slits	9
Composition dependence of the spin-anomalous Hall effect in a ferromagnetic Fe–Co alloy	9
High crystal quality of vertical Bridgman and edge-defined film-fed growth β-Ga2O3 bulk crystals investigated using high-resolution X-ray diffraction and synchrotron X-ray topogr	9
Hydrogen states in hydrogen-passivated semiconducting barium disilicide measured via muon spin rotation	9
High-performance p-channel transistors on flexible substrate using direct roll transfer stamping	9
Soft actuator with large volumetric change using vapor–liquid phase transition	9
Fabrication of β-Ga2O3/Si heterointerface and characterization of interfacial structures for high-power device applications	9
Single-shot detection of four-level phase modulated signals using inter-pixel crosstalk for holographic data storage	9
Analysis of dissolution kinetics of narrow polydispersity poly(4-hydroxystyrene) in alkaline aqueous solution using machine learning	9
Thermoluminescence properties of Ca2B2O5:Dy ceramics for neutron measurement	9
Open-air-type Ar + H2O plasma treatment of polytetrafluoroethylene for improving Ag/PTFE adhesion strength: application to highly adhesive Ag direct wiring patterns	9
Metalorganic vapor phase epitaxy of GaN on 2 inch ScAlMgO4 (0001) substrates	9
The effect of graphene and cobalt on ethanol sensing performance of ZnO based sensor prepared by sol-gel method	9
First-principles calculation analysis and photovoltaic properties of Cu compound-added perovskite solar cells	9
Low-temperature annealing behavior of defects in Mg-ion-implanted GaN studied using MOS diodes and monoenergetic positron beam	9
Improvement of communication quality using compressed sensing in underwater acoustic communication system with orthogonal signal division multiplexing	9
Highly conductive epitaxial β-Ga2O3 and β-(Al x Ga1−x )2O3 films by MOCVD	9
Evaluation of absolute charge density at the bottom of high aspect capillary holes exposed to a pulsed very high frequency plasma	9
Nanoscale wedge resistive-switching synaptic device and experimental verification of vector-matrix multiplication for hardware neuromorphic application	9
An underwater propulsion system with (Bi,Na,Ba) (Ti, Mn)O3 transducer	9
Relationship between liquid crystal layer thickness and variable-focusing characteristics of an ultrasound liquid crystal lens	9
Development of microwave-assisted, laser-induced breakdown spectroscopy without a microwave cavity or waveguide	9
Neutron detection via thermoluminescence of Tb3+-doped Li2O–Al2O3–B2O3glasses	9
Effects of acid diffusion and resist molecular size on line edge roughness for chemically amplified resists in EUV lithography: computational study	9
Effect of ultrasonic intensity and intervals of ultrasonic exposure on efficiency of sonochemiluminescence in gel phantom for sonodynamic therapy	9
Comparison between thermal strain and acoustic radiation force imaging methods for estimation of heat source distribution of high-intensity focused ultrasound	9
Physics-informed neural networks for solving the Boltzmann equation of the electron velocity distribution function in weakly ionized plasmas	9
Temperature dependence on the domain structure of epitaxial PbTiO3 films grown on single crystal substrates with different lattice parameters	8
An ultra-sensitive medical sensor for low refractive index analytes	8
Combinatorial study of the phase development of sputtered Pb(Zr,Ti)O3 films	8
Singularity structures for sub-250 nm emissions from AlGaN-based semiconductors	8
High sensitivity and flexible fabric strain sensor based on electrochemical graphene	8
Bragg coherent diffraction imaging allowing simultaneous retrieval of three-dimensional shape and strain distribution for 40–500 nm particles	8
High-quality, room-temperature, surface-activated bonding of GaInAsP/InP membrane structure on silicon	8
Reviews of low-temperature atmospheric pressure plasma for studying hemostasis and international standardization	8
Li memristor-based MOSFET synapse for linear I–V characteristic and processing analog input neuromorphic system	8
Fragment molecular orbital based interaction analyses on complexes between SARS-CoV-2 RBD variants and ACE2	8
Applying stochastic simulation to study defect formation in EUV photoresists	8
Aerosol agglomeration by aerial ultrasonic sources containing a cylindrical vibrating plate with the same diameter as a circular tube	8
Molecular mechanisms of non-thermal atmospheric pressure plasma-induced cellular responses	8
Tuning properties of SnO2/Au/SnO2 multilayer with variable Au thicknesses as transparent conductive oxides	8
Tunable dual-band perfect metamaterial absorber based on monolayer graphene arrays as refractive index sensor	8
Visualization of defects in thin metal plates by a scanning airborne ultrasound source technique using guided waves of different frequencies	8
High-frequency ultrasonic backscatter coefficient analysis considering microscopic acoustic and histopathological properties of lymphedema dermis	8
Shape-controlled synthesis of Cu2O nanoparticles with single-digit nanoscale void space via ionic liquid/metal sputtering and their photoelectrochemical properties	8
Basic investigation on identification of tissue composition based on propagation speeds of longitudinal and shear waves	8