International Journal of Solids and Structures

Article	Citations
Assessment of amplitude factors of asymptotic expansion at crack tip in flexoelectric solid under mode I and II loadings	104
Editorial Board	97
A chemo-mechanically coupled continuum damage-healing model for chemical reaction-based self-healing materials	71
Light-powered self-propelled trolley with a liquid crystal elastomer pendulum motor	70
Disk wrinkling under gravity	58
Preface to the Special Issue on the Occasion of Professor Stelios Kyriakides’ 70th Birthday	54
The contact stress distribution in the receding contact of an elastic layer with a rigid base	51
A generalized strain model for nonlinear residually stressed magneto-electrically coupled viscoelastic solids	51
Strong C1	50
Modeling the anisotropic behavior of highly orthotropic lithium-ion batteries polymer separators	49
Inverse identification of plastic anisotropy through multiple non-conventional mechanical experiments	46
Two-dimensional laminates in monoclinic-II modulated martensites	44
Out-of-plane effect on the sharp V-notch tip fields in power-law creeping solids: A three-dimensional asymptotic analysis	44
Investigation of fracture patterns and effect on capacity in all-solid-state batteries based on peridynamic electro-chemo-mechanical model	44
In-situ measurements of contact evolution for fractal rough surfaces under normal compression	44
Evolving structural tensor approach to model the damage induced anisotropy in viscoelastic solids	43
Buckling and yield strength estimation of architected materials under arbitrary loads	42
A new path-independent interaction integral for dynamic stress intensity factors of cracked structures	41
A screw dislocation and an edge dislocation interacting with a locally rough bimaterial interface	41
Bifurcation analysis of unbending and eversion of a bilayer	41
Bond exchange reactions as a paradigm for mitigating residual stress in polymer matrix fiber composites	40
Phase-field modelling of mechanical wave propagation in polycrystalline materials: Validation study	39
A multiphysics framework for energy conversion from nonlinear electrostrictive dielectric elastomer generators	38
Effect of hydrogen on the rate-dependent deformation of superelastic NiTi shape memory alloy springs: Experimental observation and thermo-diffusional-mechanically coupled model	38
Tensile and shear interactions for graphene grown on sapphire	37

Investigation of unidirectional vibration isolation and nonreciprocal design of axial elastic waves based on topological pumping theory	36
Thermoelastic behavior analysis of finite composites embedded in ellipsoidal inhomogeneities with inclusion-based boundary element method	35
Sliding frictional and adhesive coupling contact analysis of FGPM layered half-space under an insulating indenter	34
The effects of internal stresses on the creep deformation investigated using in-situ synchrotron diffraction and crystal plasticity modelling	34
3D-printed highly stretchable curvy sandwich metamaterials with superior fracture resistance and energy absorption	34
Flexoelectricity in self-rolling freestanding heterogeneous films	33
Omnidirectional wave polarization manipulation in isotropic polar solids	33
An extended gradient-enhanced damage-plasticity model for concrete considering nonlinear creep and failure due to creep	33
Fracture toughness and crack propagation in LX-17 and PBX 9502 insensitive high explosives	32
The Valanis–Landel strain energy function Elasticity of incompressible and compressible rubber-like materials	32
Insights into the viscohyperelastic response of soft magnetorheological elastomers: Competition of macrostructural versus microstructural players	32
Dynamic digital image correlation method for rolling convective contact	31
Data-driven probabilistic failure assessment curve based on similitude principle	31
Crack severity and size dependent effects on the effectiveness and operability of micro/nanogyroscopes	31
Voltage-controlled non-axisymmetric vibrations of soft electro-active tubes with strain-stiffening effect	30
Numerical analysis of ductile fracture in stretch bending of AA6061-T6 aluminum alloy sheet using GTN damage model	30
Statistical effects of pore features on mechanical properties and fracture behaviors of heterogeneous random porous materials by phase-field modeling	30
Validation of material models for puncture of 7075-T651 aluminum plate	29
Simple tension three ways	29
On the axisymmetric nanoindentation of an exponentially graded coating–substrate structure with both surface and interface effects	29
Total Lagrangian Material Point Method simulation of the scratching of high purity coppers	29
Optimal dual actuator loading configurations for extracting mixed-mode cohesive relations from interacting beams	29
Compliant frame geometry for DEMES-based gripper and flapping wing actuators: A comprehensive design study	29
Meso-scale progressive damage simulation of textile composites using mesh superposition	28
The work input to saturated porous media undergoing internal erosion	28
X-ray computed tomography analysis of pore deformation in IN718 made with directed energy deposition via in-situ tensile testing	28
Steigmann-Ogden interface effect on the effective elastic properties of nanoparticle-reinforced composites: From nanocomposites to nanoparticles	28
Self-consistent approximations for the frictionless paraboloidal and conical depth-sensing indentation: The generalized bottom effect	27
A statistical mechanics-based investigation of a solute atmosphere interacting with a crack: Solute redistribution and image effects	27
All-atom molecular dynamics simulations of nematic liquid crystal elastomers	27
Modeling a triclinic lattice elastic body based on the linear couple stress theory	27
Unravelling the deformation process of a compacted paper: in-situ tensile loading, 4D X-ray tomography and image-based analysis	26
Co-rotational 3D beam element using quaternion algebra to account for large rotations: Formulation theory and static applications	26
A general framework for mean-field homogenization of multi-layered linear elastic composites subjected to thermal and curing induced strains	26
Three-dimensional elastic–plastic lattice-spring model based on sapphire crystal structure and its application to impact characterisation studies	26
Reprint of: Shakedown in frictional contact of discrete elastic systems: A review	26
Energy dissipation study in impact: From elastic and elastoplastic analysis in peridynamics	26
Simulating loading–unloading hysteretic behaviors of nematic-genesis polydomain nematic elastomers	26
A micro-mechanically-based constitutive model for hyperelastic rubber-like materials considering the topological constraints	25
Bucking load prediction of sparsely stiffened cylindrical shells via non-destructive probing technique	25
Mechanisms and micromechanics of intergranular ductile fracture	24
Bi-stable lateral buckled beam: Equilibrium configurations analysis based on perturbation method	24
Quasi-static behavior of a pair of serially-connected Kresling Origami springs	24
Graphic stability of generalised motions	24
Application of the Green's function method for static analysis of nonlocal stress-driven and strain gradient elastic nanobeams	24
Thin shells reinforced by fibers with intrinsic flexural and torsional elasticity	24
Phase field modelling of ductile fracture in the frameworks of non-conventional thermodynamics and continuum damage mechanics	24
3D lattice meso-scale modelling of the effect of lateral compression on tensile fracture processes in concrete	23
Elastic responses of bi-material media reinforced by interfacial thin films under asymmetric loading	23
A thermodynamically consistent model for chemically induced viscoelasticity in covalent adaptive network polymers	23

Cyclic bending of steel tubes with Lüders bands	23
A multiscale continuum model for the mechanics of hyperelastic composite reinforced with nanofibers	22
Synchronous enhancement of extreme-damping and stiffness in elastic mechanical metamaterials via self-tensioning friction mechanism	22
A parameter to represent a local deformation mode and a fracture criterion based on the parameter in ordinary-state based peridynamics	22
A user-friendly anisotropic ductile fracture criterion for sheet metal under proportional loading	22
Improved concept of representative directions: cluster approach	22
Geometric effects on the crashworthiness of composite Kresling origami tubes	22
Micro–macro asymptotic approach applied to heterogeneous elastic micropolar media. Analysis of some examples	22
Chemo-mechanical modeling of static fatigue of high density polyethylene in bleach solution	22
Structural form finding using the Stress Density Method: Well-posedness and convergence of numerical solutions	22
Hybrid intelligent framework for designing band gap-rich 2D metamaterials	21
Tension-compression asymmetric functional degeneration of super-elastic NiTi shape memory alloy: Experimental observation and multiscale constitutive model	21
A thermo-mechanical, viscoelasto-plastic model for semi-crystalline polymers exhibiting one-way and two-way shape memory effects under phase change	21
Size-dependent buckling in freestanding films driven by flexoelectricity	21
Two-Scale analysis of fretting fatigue crack initiation in heterogeneous materials using Continuum Damage Mechanics	21
Energy absorption of Kresling pattern thin-walled structures with pre-folded patterns and graded stiffness	21
MPNN based graph networks as learnable physics engines for deformation and crack propagation in solid mechanics	21
A phase-field framework for brittle fracture in quasi-crystals	21
Statistical variations in predicted martensite variant volume fractions in superelastically deformed NiTi modeled using habit plane variants versus correspondence variants	20
An anisotropic hyper-visco-pseudo-elastic model and explicit stress solutions for fabric reinforced rubber composites	20
Mechanical and thermomechanical mesoscale analysis of multiple surface cracks in ceramic coatings based on the DEM-FEM coupling method	20
Towards a rational approach for multi-axial experimental campaigns for rubberlike material	20
Evolution of structure of cohesive granular ensembles in compression	20
Mechanical design of uniform strain-gradient schemes for transverse and longitudinal flexoelectricity	20
Delamination of cellulose-based materials during loading–unloading conditions: Interface model and experimental observations	20
Symmetry breaking and dynamic characteristics of post-buckling in bilayer van der Waals structures	20
The mechanical behaviors of random curved fiber networks by numerical simulations	20
The yielding behavior and plastic deformation of oxygen-free copper under biaxial quasi-static and dynamic loadings	19
A new phenomenological constitutive model for shape memory alloys	19
Interaction modelling of the thermomechanical behaviour of spatially-oriented graphene platelets (GPLs) reinforced polymer matrix	19
Thermomechanical performance of double-phase periodic and graded architected materials: Numerical and explainability analysis	19
Probing the stability of thin-shell space structures under bending	19
Modeling the effects of morphological anisotropy in transformation plasticity of metals and alloys	19
Mixed FEM for flexoelectric effect analyses in a viscoelastic material	19
Anisotropic damage model for concrete and other quasi-brittle materials	19
Maximum aggregate size effects on the evolution of the FPZ and crack extensions in concrete – Experimental and numerical investigation	19
Development of a ductile failure model sensitive to stress triaxiality and Lode angle	19
The arrest and recession dynamics of a deflating hydraulic fracture in a permeable elastic medium in a state of plane strain	18
Modeling the effect of surface roughness on mechanical fields in an elastic solid bounded by nominally flat surfaces	18
Nonlinear effect of rigidity and correlated disorder on network fracture	18
Split stress rate plasticity formulation	18
Effective moduli of multiferroic fibrous composites with strain gradient and electromagnetic field gradient effects	18
Derivation of an in-plane amplitude equation and its paraxial approximation for elastic guided waves in plates	18
Electro-chemo-mechanics theory in transfer printing of thin films in electrolyte solutions	18
The effect of friction coefficient on wrinkles of lined pipe under bending	18
Micromechanical modeling of the elastic-viscoplastic deformation for considering voids and imperfect interfaces in sintered nano-silver under compression	18
A multiscale approach for the development of a nonlinear viscoelastic friction-and-cavitation-based model for solid propellants	18
Multiscale modelling of strongly heterogeneous materials using geometry informed clustering	18
An initially cylindrical highly elastic membrane enclosing of a rigid ellipsoid	18
Effect of micron-scale nonmetallic inclusions on fatigue crack nucleation in a nickel-based superalloy	18
Identifying hyperelastic material parameters using force balance and partial displacement data	18
On mean field homogenization schemes for short fiber reinforced composites: Unified formulation, application and benchmark	17
Formation and evolution of fracture spacing on various geometric surfaces in layered materials	17
Friction as a geometric constraint on stereotomy in the minimum thickness analysis of circular and elliptical masonry arches	17
Theoretical and numerical analysis on buckling instability in a thin film sandwiched between two finite-thickness substrates under in-plane compression	17
The negative dielectric permittivity of polycrystalline barium titanate nanofilms under high-strength kHz-AC fields	17
Material damage integration approach for efficient modelling of high cycle fatigue	17
Cylindrical void growth vs. grain fragmentation in FCC single crystals: CPFEM study for two types of loading conditions	17
A dimensionless study of Functionally Graded Material membranes wrinkling using the Asymptotic Numerical Method	17
Identifying strain-dependent structural defects in granular materials from the hidden structure-plasticity relationship	17
Solitary waves in slightly dispersive quasi-incompressible hyperelastic materials	16
Influence of the DCB/Wedge beam kinematics on the identification of the cohesive parameters of interfaces	16
The effects of axisymmetric radial, circumferential and longitudinal eigenstrains on the traveling wave solution in a neo-Hookean cylindrical rod	16
Investigation of dynamic impact behavior of bighorn sheep horn	16
Simulation trained CNN for accurate embedded crack length, location, and orientation prediction from ultrasound measurements	16
Low energy fold paths in multistable origami structures	16
Free vibration of electroelastic thin-walled structures under static load	16
Linear viscoelastic transversely isotropic model based on the spectral decomposition of elasticity tensors	16
Editorial Board	16
Predicting transformation patterns in pseudoelastic NiTi tubes under proportional axial–torsion loading	16
Prediction of yield strength anomaly by improved semi-discrete variation Peierls-Nabarro model for L12-ordered alloys Ni3X and Co3X	16
An atomistic entropy based finite element multiscale method for modeling amorphous materials	16
On the mechanics of a double thin film on a finite thickness substrate	16
Consistent memory surface model for plateau and hardening regions	16
Nonlinear thermoelastic buckling analysis of thin-walled structures using a reduced-order method with mixed nonlinear kinematics	15
Viscoplastic behavior of a porous polycrystal with similar pore and grain sizes: Application to nuclear MOX fuel materials	15
Surface wrinkling of a hyperelastic half-space coated by a liquid crystal elastomer film	15
Multi-surfaced elasto-plastic wood material model in material point method	15
A damaging beam-lattice model for quasi-brittle fracture	15
Legendre-based node-dependent kinematics shell models for the global–local analysis of homogeneous and layered structures	15

Viscoelastic-viscoplastic polymer composites: Development and evaluation of two very dissimilar mean-field homogenization models	15
Corrigendum to “A large strain hyperelastic viscoelastic-viscoplastic-damage constitutive model based on a multi-mechanism non-local damage continuum for amorphous glassy polymers” [Int. J. Solids Str	15
On spherical nanoinhomogeneity embedded in a half-space analyzed with Steigmann–Ogden surface and interface models	15
A “poor-man’s” deformation plasticity based approach to topology optimization of elastoplastic structures	15
Non-contact reconstitution of the traction distribution using incomplete deformation measurements: Methodology and experimental validation	15
Effect of an edge dislocation on hydride growth in zirconium: elastic complex potential study	15
Surface stress of gold nanoparticles revisited	15
Extension of Tsai-Hill failure concept for mixed-mode I/II fracture investigation of orthotropic materials considering T-stress effects	15
Modelling intralaminar damage mechanisms in fibre reinforced polymers at finite strains	15
Hyperspace bounds on mixed mode elastic constants of n-component transversely-isotropic unidirectional materials	15
Multi-scale modeling of shock wave propagation in energetic solid-state composites	15
Wrinkling of twisted thin films	14
Investigating the influence of stress on UV-induced degradation in cellulose acetate: A comprehensive experimental characterization	14
Frictional contact of one-dimensional hexagonal quasicrystal coating considering thermal effects	14
Geometrically exact 3D beam theory with embedded strong discontinuities for modeling of localized failure in bending	14
Adhesive contact mechanics of viscoelastic materials	14
Refined nonlinear micromechanical models using artificial neural networks for multiscale analysis of laminated composites subject to low-velocity impact	14
Compact forced simple shear specimen: Design improvement based on quasi-static experiments and finite element simulations	14
Developing a scalable analytical framework for predicting the contact behavior of elastic rings against rigid surfaces	14
Editorial Board	14
Density-graded Voronoi honeycombs – A local transversely isotropic description	14
Transfer of dislocation slip through grain boundaries in metal-graphene nanocomposites	14
The interfacial behavior of a thermoelectric thin-film bonded to an orthotropic substrate	14
Advancing contact between a rigid pin and a FGM circular beam with clearance	14
A data-driven modeling approach to quantify morphology effects on transport properties in nanostructured NMC particles	14
Deformation and stability of initially stressed hyperelastic plates	14
Dual-band topological states in actively convertible metamaterials with parallel platforms	14
Computational modelling of structural batteries accounting for stress-assisted convection in the electrolyte	13
Machine learning applications in sheet metal constitutive Modelling: A review	13
Experimental–numerical analysis of silicon micro-scratching	13
Superposing plane strain on anti-plane shear deformations in a special class of fiber-reinforced incompressible hyperelastic materials	13
A non incremental variational principle for brittle fracture	13
A mean-field micromechanical incremental approach for brittle damage in particulate microstructures under monotonic loading, using a piecewise uniform damage field	13
The family of elastically isotropic stretching-dominated cubic truss lattices	13
A mean-field homogenization model for fiber reinforced composite materials in large deformation with plasticity	13
Bending/shear wave dispersion analysis of granular chains – Discrete and enriched continuous Cosserat modelling	13
On the influence of stress state on ductile fracture of two 6000-series aluminium alloys with different particle content	13
Plastic buckling of columns at the micron scale	13
Fracture toughness improvement due to crack deflection and crack trapping by elliptical voids or particles	13
Machine learning predictions on the compressive stress–strain response of lattice-based metamaterials	13
Approximate contact force model for viscoelastic materials based on generalized Maxwell model	13
On fracture anisotropy in textured aluminium alloys	13
Uncovering the intrinsic deficiencies of phase-field modeling for dynamic fracture	13
Plastic deformation of polymer matrix composites reinforced with beaded fibers	13
Computational Cosserat periporomechanics for strain localization and cracking in deformable porous media	13
Competing effects of current density and viscoplastic deformation on the critical conditions for dendrite growth into solid-state lithium battery electrolytes	13
Gradient of mechanical properties in polymer nanocomposites: From atomistic scale to the strain gradient effective continuum	13
Capturing the stress evolution in electrode materials that undergo phase transformations during electrochemical cycling	12
Concurrent topology optimization of multiscale piezoelectric actuators	12
Defect dynamics modeling of mesoscale plasticity	12
Admissible shell internal forces and safety assessment of masonry domes	12
A constitutive macroscale model for compressible magneto-active polymers based on computational homogenization data: Part II — Magnetic nonlinear regime	12
Experimental breakage mechanics of confined granular media across strain rates and at high pressures	12
Inhomogeneous thinning of imperfect dielectric elastomer films: Large deformation and nonlinear electromechanical instability	12
Transition from equatorial to whole-shell buckling in embedded spherical shells under axisymmetric far-field loading	12
Fracture characterisation of a bi-material adhesive joint under mode I loading: Effect of roughness at the bonding interface	12
Measurement and calculation method for circumferential plastic strain ratio of anisotropic aluminum alloy tubes	12
Shock induced damage and failure mechanisms of magnesium aluminate spinel based on an atomistically calibrated bond-based peridynamic model	12
On the dynamic shear failure of Ti-6Al-4V in different test specimen geometries	12
Numerical modeling of wrinkling modulation in tensegrity-membrane structures	12
Pop-up kirigami for stiff, dome-like structures	12
Semi-analytical solution to elastic–plastic contact-impact between a 316 stainless steel rod with truncated cone nose and rigid flat	12
Homogenisation of periodic lattices with lumped and distributed mass: Beam models, continualisation and stabilisation	12
Rate dependent fracture along a silicon/epoxy interface under mixed-mode loading conditions	12
Numerical simulation for deformation of laminates combining the novel shell element with the decoupled two-scale viscoelastic analysis of FRP	12
A micromechanical model for shape memory alloy fiber reinforced plastics considering cyclic hygrothermal damage	12
Instabilities and cavitation in cylindrical wavy line contact: A Maugis analysis	11
Stability discussion and application study of pseudo-corner models	11
A combined displacement discontinuity-interaction integral method for computing stress intensity factors and T-stress	11
Average Eshelby tensor of an arbitrarily shaped inclusion from convexity to non-convexity: Effective elastic properties of composites	11
Theoretical predictions and evolutions of wrinkles in the film-intermediate layer-substrate structure under compression	11
A nonuniform transformation field analysis for composites with strength difference effects in elastoplasticity	11
Rate-dependent wrinkling and subsequent bifurcations of an elastic thin film on a viscoelastic layer	11
Response to “A numerical study on tensile strength of low-density Kagome networks made of brittle fibers”	11
Form generation of rigid origami for approximation of a curved surface based on mechanical property of partially rigid frames	11
Contact mechanics of open-cell foams with macroscopic asperities	11
Theoretical and experimental studies on large deflection analysis of double corrugated cantilever structures	11
Free vibration and buckling analysis of simply supported rectangular nano-plates: A closed-form solution based on nonlocal 3D elasticity theory	11
Editorial Board	11
Reverse analysis of film/substrate cohesion by indentation: A mesoscopic perspective	11
Inverse identification of large strain plasticity using the hydraulic bulge-test and full-field measurements	11
A general approach for modelling the peeling of a flexible tape from an elastic substrate	11
Dependence of the coefficient of restitution on the shape of an impacting body	11
A general theory for analyzing morphing bistable tensegrities based on quasi-static assumption	11
Extended FFT-based micromechanical formulation to consider general non-periodic boundary conditions	11
Investigation of stress states around a finite-height crack	11
Editorial Board	11
An exploration into surface wrinkling in 3D printing inspired orthotropic bilayer systems	11
Generalized section–section interaction potentials in the geometrically exact beam theory: Modeling of intermolecular forces, asymptotic limit as strain-energy function, and formulation of rotational	11
Evolution of the real contact area of self-affine non-Gaussian surfaces	11
Combined experimental/theoretical approach to residual stresses within multiplicative elasto-plasticity	11
Energy-based PINNs using the element integral approach and their enhancement for solid mechanics problems	11
Multiscale periodic homogenization for additive manufacturing of honeycomb lattices	11
Cascading crack bifurcations in soda-lime glass: Quantification of fracture mechanics-based precursors using Digital Gradient Sensing	11
Rayleigh waves in isotropic elastic materials with micro-voids	11