Inorganic Materials

Article	Citations
Development of the Optimal Shape and Reinforcement Structure of the Specimen for Adequate Determination of the Tensile Strength of Unidirectional Composites	22
Structure and Phase Formation of a Ti–Al–Si Based Alloy Prepared by Self-Propagating High-Temperature Synthesis Compaction	17
Evolution of the Structure and Magnetic Properties of the High-Tc Superconductor YBa2Cu3O6.92 in the Sol–Gel Synthesis Process	15
Installation and Testing Methods for Frequency Stability under Cyclic Loading of Metals and Alloys	14
Electrical Conductivity of Sodium Sulfate-Based Phases	12
Specific Absorption Coefficient of Ni2+ Ions in TeO2–ZnO–Bi2O3 Glasses	12
Adsorptive and Photocatalytic Properties of Molybdenum-Modified Titanium Dioxide	11
Using Mathematical Methods for Analysis of Temperature–Time Conditions of Arc Surfacing Upon Manufacturing of Steel-Aluminum Compositions	11
Determination of 1,1-Dimethylhydrazine in Water with High Pressure Liquid Chromatography and Spectrophotometric Detection Using Micellar Catalysis	10
Formation of Complexes of Phosphorus and Boron Impurity Atoms in Silicon	10
Heat-Resistant Properties of High-Temperature SiCN Ceramic Fibers for Application in Metal-Matrix Composite Materials	8
Homogeneous and Heterogeneous Mechanisms of Crystal Nucleation in Silver-Containing Lithium Silicate Glasses	8
Luminescence of Thioglycolic Acid-Passivated PbS Quantum Dots in the Presence of Potassium Iodide	8
Ternary Intermetallic Compounds R26(RuxIn1 – x)17 (R = Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, Tm, Lu), Pr21Ru8.2In5 and Gd6Ru2In with High Content of Rare Earth Elements	7
Electrical Properties, Strength, and Structure of VK94-1 Ceramics Produced Using Spray Drying of Highly Concentrated Suspension	7
Mechanical Stress in SiNx Films Grown by High Density Plasma Enhanced Chemical Vapor Deposition	7
Phase Transformations and Properties of Thin Barium Neodymium Ferroniobate Films in the Temperature Range from –190 to 200°C	7
Standard Enthalpies of Formation of Te2MoO7 and ZnMoTeO6	7
Bioinorganic Catalyst for Aerobic Oxidation of Hydrocarbons	7
Laser Amorphization of a Crystalline Phase in the Bulk of a Thermally Stable Lithium Aluminosilicate Glass-Ceramic	7
Monolithic Ni/LiNbO3 Structures with an Interfacial Magnetoelectric Effect	6
Computational and Experimental Study of the Stress State of the Opposed Compressor Connecting Rod to Assess the Probability of Failure-Free Operation	6
Porous Materials Prepared by Sintering Basalt Fiber with CuS and ZrO2 Additions and Containing a Rigid System of Microfiltration Transport Pores	6
Cu2+ and Ni2+ Cation Sorption/Desorption Processes on Amorphous Titanium Phosphate Sorbents	6
Effect of Erbium Complexes on the Anti-Stokes Luminescence of Y2O2S:Er Ceramics	6

Structure and Phase Formation in the Ti–Al–Mo–N and Ti–Al–Mo–Ni–N Systems during the Arc PVD Coating Process	6
Bismuth Monocation IR Photoluminescence in Mixed Cyclotriphosphates of Alkali and Alkaline Earth Metals	6
Application of Inverted Multivariate Calibrations to Determine the Total Content of Phenols	6
Chemical Binding of Carbon Dioxide on Zinc Oxide Powders Prepared by Mechanical Milling	6
Effect of Temperature and Oxidizing Medium on the Properties of Silicon Carbide Fiber	6
High-Temperature Synthesis of Cr–Mo–Al–C Materials	5
X-ray Fluorescence Determination of Small Quantities of Hafnium in Nuclear Pure Zirconium-Based Materials	5
Interatomic Potential Development for the Fe–Ni System and Evaluation of the Elastic Properties of an Iron–Nickel Alloy	5
Stochastic Modeling of the Hydration Kinetics of β-CaSO4⋅0.5H2O	5
Analysis of the Effect of the Direction of Reinforcement of a Fibrous Composite Material on the Inhomogeneity of Localization of Deformations and Stresses Using the Method of Thermoelastic Response	5
Growth of Calcium Phosphate Layers on TiO2–SiO2–P2O5/CaO and TiO2–SiO2–P2O5/La2O3 Bioactive Composites	5
Determination of Polyorganosiloxanes (by Silicon) in Water by Extraction High-Resolution Continuum Source Electrothermal Atomic Absorption Spectrometry	5
High-Temperature Synthesis of Mo3Al2C-Based Materials via Combustion of MoO3 + Al + C + Al2O3 Powder Mixtures	5
Growth of an InP/GaInAsP Heterostructure on a Shaped InP Substrate for Laser Diode-Based CO2 Sensing	5
Modified Planar Sensors for Determination of Cefepime	5
Atmospheric-Pressure Synthesis of Titanium Carbide in an Arc Plasma Reactor	5
Atomic Structure and Growth Relationships of TaSi$$_{n}^{ - }$$ (n = 12–17) Monoanionic Silicon–Tantalum Clusters	5
Ferrite-Based Solid Solutions: Structure Types, Preparation, Properties, and Potential Applications	5
Electroplastic Effect in Titanium Alloys Under Tension	5
Effect of SiO2 Concentration on the Electrical Conductivity of M2(WO4)3/SiO2 (M = La, Sm) Composites	5
Two-Parameter Elastoplastic Fracture Criterion and Corrected Fracture Toughness	5
Mechanical Properties of Silicon Nitride Ceramics Containing Yb2O3 Sintering Additives	4
Effect of Mechanical Activation on the Thermal Oxidation of Sphalerite	4
Magnetic Properties of Fe1 – xCoxCr2S4 Solid Solutions in the FeCr2S4-Rich Region	4
Probe Mössbauer Study of Magnetically Ordered Manganite $${\text{ScMn}}_{{{\text{0}}{\text{.996}}}}^{{{\text{57}}}}{\text{F}}{{{\text{e}}}_{{{\text{0}}{\text{.004}}}}}{{{\text{O}}}_{{\text{3}}}}$$	4
Barothermal Analysis and Processing, Plastic Deformation, Microstructure, and Properties of Al–Zn Binary Alloys	4
Algorithm of Combining Chromatography–Mass Spectrometry Untargeted Profiling and Multivariate Analysis for Identification of Marker Substances in Samples of Complex Composition	4
Effect of Organoalumoxanes on the Microstructure and Density of Al2O3f/Al2O3 Composites	4
Structural, Dielectric, and Ferroelectric Properties of a BiFeO3/Sr0.5Ba0.5Nb2O6/Pt(001)/MgO(001) Heterostructure	4
Reconstruction of the Orientation Distribution Function for Materials with Low Lattice and Sample Symmetry Using the Harmonic Method	4
Determination of Mineral Composition of Copper Ores by X-Ray Methods	4
Synthesis and Thermodynamic Functions of Ruthenium Dichalcogenides in a Wide Temperature Range	4
Effect of Codopant Ions on the IR Photoluminescence of Cu2+ Impurity Centers in Corundum (α-Al2O3)	4
Fused Silica Container Material with Al2O3 Nanofiber Additions for Semiconductor Technologies	4
Influence of Size and Surface Effects on Electrical Transport Properties of NiO Nanoparticles Produced in a Vacuum Arc Discharge	4
Standard Enthalpies of Formation of the Bi2Mo3O12, Bi6Mo2Te2O21, and Bi2Te2O8 Complex Oxides	4
Ion-Exchange Extraction of Zn2+, Co2+, and Ni2+ Cations from Solutions by Titanium Phosphate Matrices	4
Defect Formation in Gd3AlxGa5–xO12 (x = 1–3) and Gd3Al2Ga3O12:Ce Crystals	4
Electric-Field-Induced Impurity Effects in p-GaSe Single Crystals	4
Europium-Containing Luminescent Composites Based on Lead(II)-Modified Poly(methylmethacrylate)	4
Effect of the Doped Growth Charge Preparation Process on the Growth Conditions and Properties of LiNbO3:B:Mg Single Crystals	4
Effect of Ultrasonic Treatment of Pd–4 at % In–1 at % Ru Membrane Foil: Sorption and Hydrogen Permeability	4
Combustion Synthesis of Cast Iron Aluminides from a Fe2O3 + Al Mixture	4
Thermal Conductivity of Single Crystals of CaF2–BaF2 Solid Solutions	4
New Ternary Compounds Yb2Pt3Si2 and Yb3Pt5Si: Crystal Structures and Phase Equilibria	4
Synthesis of Fe/TaON/β-Si3N4/β-Si3Al3O3N5 Composites for Photocatalytic Degradation of Chloramphenicol in Water	4
Effect of Heat Treatment on the Structure and Optical Properties of Porous Anodic Titanium Oxide Films	3
Extrinsic Photoelectric Effects in Holmium- and Erbium-Doped n-InSe Crystals under Combined Excitation	3
Anomalous Temperature Dependences of the Band Gap and Thermal Expansion Coefficients in AgInSe2 Single Crystals	3
Purity Level of Chromium, Molybdenum, and Tungsten (according to Materials in the Exhibition–Collection of Extrapure Substances)	3

Phase Tree, Prediction of Crystallizing Phases, and Description of Chemical Interaction in the NaF–KF–MgF2 System	3
Preparation and Properties of Transparent Scandium Oxide-Modified Nd:YAG Ceramics	3
Aqueous Propylene Glycol Extracts from Medicinal Plants: Chemical Composition, Antioxidant Activity, Standardization, and Extraction Kinetics	3
Effect of Structural Perfection of Crystalline β-NaYF4:Yb,Er Phosphor Powders on the Efficiency of Their Upconversion Luminescence	3
Monitoring of the Concentration of Volatile Organic Compounds in Beef Meat after Radiation Processing with Accelerated Electrons	3
Structure, Texture, and Substructure of Foil in Sequential Rolling Steps of Cu–36.4 at % Pd Alloy	3
Quantification of Calcium, Phosphorus, and Cerium in Novel Biocompatible Materials by Total Reflection X-Ray Fluorescence Spectroscopy	3
Effect of Dopants on the Magnetic Permeability and Dielectric Constant of Spinel Ferrites	3
Determining the Total Content of Similar Substances Using Integrated Indices or Multivariate Calibrations at a High Intragroup Selectivity of Signals	3
Application of the Mixing Rule to Evaluation of the Thermophysical Properties of Amorphous Fe80B20 Alloy	3
Study of the Functional and Mechanical Properties of a Shape Memory Polymer Composite for a Space Antenna Reflector	3
Refined Method for Estimating the Interlayer Shear Modulus by Correcting the Deflection of Polymer Composite Specimens	3
Growth of AlGaInSbP/InP(100) Heterostructures from High-Temperature Solution via Temperature-Gradient Zone Recrystallization and Their Properties	3
Vibrational Spectra of Strontium Bismuth Molybdate: Experiment and First Principles Calculation	3
Studying Crack Resistance and Destruction Mechanism of Steel Aluminum Composite Material	3
Thermal Properties of Extrapure Glasses of the Ga15Ge10Te75–xIx System	3
Core–Clad High-Purity Rare-Earth-Doped Chalcogenide Glass Fibers as IR Light Sources	3
Descent along Nodal Straight Lines and Simplex Algorithm: Two Options of Regression Analysis Based on the Least Absolute Deviations Method	3
Hot Isostatic Pressing-Induced Structural Changes in MgAl2O4 Ceramics	3
Application of MIP Sensors to the Determination of Preservatives in Nonalcoholic Drinks	3
Effect of Heat Treatment of Molten 6Bi2O3⋅SiO2 on the Phase Composition and Microstructure of Its Solidification Products	3
Converting the Instrumented Indentation Diagrams of a Ball Indenter into the Stress–Strain Curves for Metallic Structural Materials	3
Formation of Magnesium Hydrosilicate Nanoscrolls with the Chrysotile Structure from Nanocrystalline Magnesium Hydroxide and Their Thermally Stimulated Transformation	3
Preparation of Gas-Sensing Thin Sr2+-Doped YFeO3 Films	3
Nanocrystalline Ferrites with Spinel Structure for Various Functional Applications	3
Nitridation of a Ti–V Metal Pair and Evaluation of the Thermoelectric Power of the Resultant Ceramic	3
Actual Problems of Creating Digital Twins of Machine Engineering Products in Terms of Durability Assessment	3
Effect of an Electric Field on the Crystallization Behavior of Amorphous TlIn1–xSnxSe2 Films	3
Thermodynamic Modeling of Phase Equilibria in the Nb–Zr–N System	3
Si3N4/TiN Ceramic Composites Produced by Hot Pressing	3
PbIn1/2Ta1/2O3 Synthesis Methods	3
Distinctive Features of the Formation of Spherical Mesoporous Silica Particles below Room Temperature	3
Development of a Technique for Analysis of Cerium Oxide by Arc Atomic Emission Spectrometry	3
Determination of As, Bi, Pb, Sb, and Sn in Copper, Nickel, and Alloys on Their Basis by Electrothermal Atomic Absorption Spectrometry	3
Anodic Behavior and Oxidation of Thallium-Containing Alloy Zn22Al	3
Study of Mechanical Properties and Microstructure of Welded Joints Made of Structural High-Strength Steel S690QL of Russian and Foreign Production	3
Calculation of the Heat Capacity Baseline in a Model of a Two-Phase Region in the Absence of Phase Transformations and Other Transitions	3
Impact Toughness of Low-Carbon, Low-Alloy Steel with a Ferrite–Bainite Microstructure from Multiple Test Results	3
Characterization of Metallic Iridium Nanoparticles Synthesized under Hydrothermal Conditions	3
Fragility and Elastic Moduli of Chalcogenide Glasses	3
Optimization of R2O2Se (R = La, Gd, Y) Synthesis for the Preparation of Optical Materials	3
Self-Propagating High-Temperature Synthesis of Compositions in the Si3N4–Yb2O3 System	3
Exciton Size in Semiconductor Sulfides MS (M = Cu, Ag, Zn, Cd, Hg, Sn, Pb)	3
Mechanical Properties of Materials in the Calculations of a Low-Cycle Deformation of Structures	3
Effect of Lithium Ions on the Properties of Calcium Sulfate Cement Materials	3
Synthesis and Thermodynamic Properties of the Ca3Sc2Ge3O12 Germanate	3
Heat Capacity and Thermal Expansion of Praseodymium Hafnate	3
Low-Temperature Luminescence of Lithium Aluminate Spinel LiAl5O8 Doped with Chromium Ions	3
Synthesis and Phase Transformations of Compounds in the Mg4Na(PO4)3–Mg3(PO4)2 System as Promising Phases for the Fabrication of Bioceramics	3
Retraction Note: Targeted Modification of Ni Nanotubes by Electron Irradiation	3
Pycnometric Determination of Porosity Characteristics	3
Formation, Morphology, and Size Parameters of Nanopowders Based on Mg3Si2O5(OH)4–Ni3Si2O5(OH)4 Nanoscrolls	3
Structural, Textural and Photocatalytic Properties of Germanium-Doped Zirconium Dioxide	2
Diagnostic Methodology for Microinclusions in Objects of Soil and Geological Origin: Validation and Practical Application	2
Preparation and Structure of New Orthophosphates Isostructural with the Mineral Langbeinite: A2R1.5Ta0.5(PO4)3 (A = K, Rb; R = Ga, Gd, Dy, Ho, Er, Yb)	2
Optical MgO Ceramics Fabricated by Hot Pressing with LiF	2
Evaluation of the Degree of Starch Pyrodextrinization Using Binary Digital Image Colorimetry	2
Effect of Annealing Temperature on the Surface Structure and Properties of Porous TiNi	2
Phase Formation and Ionic Conductivity of Na1 + 2xZnxZr2 – x(PO4)3 Phosphates	2
Synthesis, Crystal Structure, and High-Temperature Heat Capacity of Pb10 – xSmx(GeO4)2 + x(VO4)4 – x (x = 0.2, 0.5, 0.7, 1.0) Apatites from 350 to 1000 K	2
Energy Transfer in Nanocomposites of Zinc Oxide with Erbium and Ytterbium Oxides	2
Structure and Phase Formation in Arc PVD Zr–B–Si–C–Ti–(N) Coatings	2
Mechanochemical Synthesis of Nanopowders and Ionic Conductivity of Nanoceramics of the (Pb0.67Cd0.33)0.825Sr0.175F2 Fluorite Solid Solution	2
Thermochemical Synthesis of Molybdenum Carbide on the Basis of the (NH4)6Mo7O24–NH4NO3–C6H12N4 System	2
Isomorphous Bismuth Substitution for Neodymium in the Nd5Mo3O16 + δ Molybdate	2
Damage Accumulation near a Hole under Low-Cycle Fatigue Based on Measuring Local Strain Response	2
Microhardness and Thermal Expansion of Some Binary and Ternary Boride Phases in the Ca–Ir–B System	2
Effect of Magnetic Nanoparticles and Cetylpyridinium Chloride on Electroanalytical Properties of Planar Sensors for Cefuroxime and Cefotaxime	2
A New Method for the Synthesis of a NbC/C Nanocomposite	2
Rapid X-Ray Fluorescence Analysis of Intercalation Compounds for Molybdenum Content	2
Atomic Ordering Kinetics in a Cu–56 at % Au Alloy at a Temperature of 250°C	2
Paramagnetic Meissner Effect in Superconducting Rhodium Borides with and without a Magnetic Subsystem	2
Formation of Layered Sulfide–Hydroxide (Valleriite) Materials under Hydrothermal Conditions	2
Optical Properties of Grätzel Cells Based on Delphinidin with Silicon Carbide Nanoparticles	2
Computational and Experimental Analysis of Resistance to Low-Cycle Deformation of Heat-Resistant Alloy	2
Extrinsic Absorption by Copper(II) Ions in Molybdenum-Containing Zinc Tellurite Glass	2
Fields of Residual Stresses near Filled Assemblage Holes of the Aircraft Wing Panel	2
Composition of Low-Molecular Weight Impurities in Dimethylmethylphenylsiloxane Rubbers with Terminal Hydroxyl Groups	2
The Effect of Charge Carrier Concentration and Structural Defects on the Raman Spectra of GaAs Single Crystals Grown by the Czochralski Method	2
Effect of Tungsten on the Thermal Hysteresis in the Resistivity of Vanadium Dioxide Films	2

Separation Factors and Peclet Numbers in Evaporation Refining of Elemental Substances near Their Melting Point	2
Assessing Fatigue Failure Probability for Structural Components under Deterministic and Stochastic Loading Taking into Account the Initial Crack Size Scatter	2
Vertical Vapor Transport Growth and Properties of Cd3As2 Crystals	2
Quantification of Si Dopant in β-Ga2O3-Based Semiconductor Gas Sensors by Total Reflection X-Ray Fluorescence Spectroscopy (TXRF)	2
Thermoluminescence of Calcium Tungstate Containing Oxygen Vacancies	2
Effect of Composition on the Electrical Properties of (TlInS2)1–x(TlGaSe2)х Multicomponent Solid Solutions	2
Studies on Isothermal Decomposition of Austenite Using Methods of Mathematical Simulation	2
Formation of Nanostructured Li4Ti5O12-Based Composites upon Hydrothermal Treatment of Their Components	2
Determination of the Volume Fraction of Microporosity in Single Crystals of Nickel-Based Superalloys	2
Conditions of Cobalt(II) Ferrite Preparation on the Surface of Biochar	2
Methodological Issues of the Fuzzy Set Theory (Generalizing Article)	2
Application of MARS-5 and UltraWAVE Microwave Systems to the Digestion of Silicate Rocks Followed by ICP-MS Analysis	2
An X-ray Photoelectron Spectroscopy Study of Ultraviolet Photoannealing-Induced Surface Transformations of Sol–Gel Derived Zinc Oxide-Based Films	2
Structural Characteristics and Photoelectric Properties of Iodine-Doped PbS Films Produced by Chemical Deposition	2
Thermodynamic Assessment of Pyrometric Monitoring of Gallium Purity during Crystallization Purification	2
Influence of Sintering Conditions and Pore Former Content in the Starting Mixture on Characteristics of Porous Titanium Prepared from TiH2 Powder	2
Phase Formation in the V2O5–AlN System	2
Preparation of High-Purity Tin Dichloride	2
Composition of Rhenium Heptasulfide Prepared by Different Methods	2
Calculation of Two-Stage Metal Hydride Hydrogen Compressors Using a Model of Intermetallic Compound–Hydrogen Phase Equilibria	2
Features of Nonlinear In-Plane Shear Deformation of a Unidirectional and Orthogonally Reinforced Polymer Sheets of Composite Materials	2
Thermoelectric Properties of an Extruded ZrO2-Modified Bi0.85Sb0.15 Solid Solution	2
Synthesis of Superconducting Boron-Doped Diamond in Carbon and Boron Solutions in Molten Gold and Copper	2
Preparation of Er:YAG- and Bi2O3–B2O3–BaO-Based Glass-Ceramics by Selective Laser Sintering	2
Effect of Stress Concentration near Grips on the Tensile Strength of Composites	2
Using Acoustic Emission and Video Recording for Monitoring the Kinetics of Damage under Compression of Composite Samples	2
Effect of Silicon Carbide Whiskers on the Physicomechanical Properties of ZrB2/SiC Ceramic Composite Materials	2
Effect of the Pore Structure of Glass on the Formation of Birefringent Regions under the Effect of Femtosecond Laser Pulses	2
LiFePO4/C/Ag Cathode Materials Prepared by the Pechini Method	1
Synthesis of a Diatomite-Based Calcium Metasilicate Hydrate and Investigation of Its Adsorptive and Structural Properties	1
Sol–Gel Synthesis of Ca3(PO4)2 and Ca3 – xNa2x(PO4)2 Powders for the Fabrication of Bioceramics by 3D Printing	1
High-Voltage Power Supply for X-ray Control of the Structure of Materials	1
Analysis of the Electromagnetic Properties of 2000NN/2000NM Composites with Ferroelectric and Polymer Matrices	1
Possibilities of Estimation of Fracture Probabilities and Allowable Sizes of Defects of Structural Elements According to the Criteria of Fracture Mechanics	1
Application of Piezoelectric Sensors for the Determination of Aspartame in Fluids	1
One-Dimensional Layered Structures as Precursors for the Fabrication of Nanostructured Lithium Titanate Spinel-Based Composites	1
Interaction of a Metallic Catalyst with the Barrier Layer Material during High-Temperature Formation of Nickel Nanoparticles	1
Preparation of Glass-Ceramics via Impregnation of Erbium-Doped Yttrium Aluminum Garnet with Molten BaO–B2O3–Bi2O3 Glass	1
Preparation, Absorption Spectra, and Luminescence Properties of Er2O3- and Yb2O3-Doped Oxyfluoride Glasses in the CaF2–SiO2–B2O3–Bi2O3–TiO2–ZnO–Y2O3 System	1
Some Features of Iron Determination in Dust Emissions from Gas Purification at the Electrometallurgical Plant	1
Research of Sediments in Assessing the Causes of Corrosion at Gas Facilities	1
Influence of Tin and Titanium on the Electrochemical Performance of Lithium-Rich Cathode Materials	1
Luminescence Properties of Tb3+- and Eu3+-Doped Lanthanum Magnesium Pentaborates	1
Single-Electrode Gas Sensors Based on an In2O3–Graphene Composite	1
Thermal Conductivity of Fine-Grained Nd:YAG/SiC Composite Ceramics for Inert Fuel Matrices	1
Trends in the Development of Room-Temperature Sodium–Sulfur Batteries	1
Kinetics of High-Temperature Nitridation of Zr–Nb Solid Solutions	1
X-ray Fluorescence Analysis of Y3–xYbxNbO7 Paraniobate-Based Ceramics	1
Effect of the SiO2/GeO2 Ratio on the Properties of Porous Borosilicate Glass-Based Materials	1
Synthesis and Characterization of a KBaGd(MoO4)3:Er3+/Yb3+ Phosphor with a Scheelite-Like Structure	1
Gigacycle Fatigue of the Turbocharger Gear Wheel	1
Adhesion Strength of the Interface between Solid Phases in the GaxGe40–xS60–Quartz Glass System	1
Combustion Synthesis of a Composite Material from a Ti + 2B Mixture and 3Ni + Al Composite Particles	1
A Study of the Effect of the Macrogeometry of Rubbing Steel Bodies upon Their Point Contact on the Tribological Characteristics of Lubricants under Boundary Lubrication Conditions	1
Determination of Strategic Metals in Graphitic Formations by the Methods of Neutron Activation Analysis with a Californium Source	1
28SiO2-Based Isotopically Enriched Silica Fiber	1
Synthesis of Dimolybdenum Pentaboride Nanoparticles via Reaction of Amorphous Boron with Molybdenum in Ionic Melts	1
Purity of Alkaline-Earth Metals (according to Materials in the Exhibition–Collection of Extrapure Substances)	1
Phase Equilibria in the СaMoO4–СaSO4–СaF2–СaCl2 System	1
Arc Optical Emission Spectroscopy of Initial Feedstock for Production of Metallurgical Alumina	1
On the Nature of the Decrease in the Rate of the B2 Ordering Process in a Cu–Pd Solid Solution as the Equiatomic Composition Is Approached	1
Optical Probing Position Sensitivity Characteristics of a Photodetecting Element Based on High-Resistivity CdSe Layers	1
Low-Cycle Fracture Resistance of the Superalloy at Single- and Two-Frequency Modes of Loading	1
Wear Regimes of Hot-Extruded Babbitt-Based Composites	1
Preparation of Nanoporous Carbon from a Spherical NbC/C Nanocomposite and Its Properties	1
Preparation of Si2N2O Ceramics by Spark Plasma Sintering	1
Effect of Al on the Phase Composition, Microstructure, and Properties of SHS Composites Based on the Ti–B System	1
Sorption of Se(IV) from Aqueous Solutions with Subsequent Determination by X-Ray Fluorescence Analysis	1
Polymorphism of High-Temperature Aluminothermic Synthesis Products in the Ni–Al–Co System	1
Magnetic Properties of the CoCr0.5Ga1.5S4 Compound	1
Structure-Sensitive Properties of Melts and Thermal Properties of Glasses in the B2O3–CaO–Al2O3–PbO System	1
Increased Manganese Solubility and Ferromagnetic Signal in Chalcopyrite CuGaSe2:Mn as a Result of High-Temperature Quenching	1
Content Analysis of Data on the Thermal Properties of Fluoride and Modified Fluoride Glasses	1
Analytical Support for the T 000 Tellurium Preparation Process	1
Self-Propagating High-Temperature Synthesis of a Ti–Al–Mn Alloy	1
Fatigue Fracture of 316L Steel Manufactured by Selective Laser Melting	1
Fields of Residual Stresses near Open Assemblage Holes of Aircraft Wing Panel	1
Synthesis and Sorption Properties of Nanostructured Sodium Aluminosilicates Differing in Si/Al Ratio	1
Synthesis of SrSnO3/SnO2 Composites via Thermal Decomposition of a Precursor	1
Study of Carbon Dioxide Corrosion Products by X-Ray Diffraction	1
Phase Complex and Chemical Interaction in the Ternary Reciprocal System Li+,Rb+||Br–,$${\text{CrO}}_{4}^{{2 - }}$$	1
Study of the Stages of Cavitation Development in Channels Based on Hydro- and Sonoluminescence Measurements	1
Tungsten Borides Prepared from Tungsten-Containing Concentrate via Exposure to Microwave Plasma	1
Growth of TiSiN Films by Room-Temperature Reactive Magnetron Sputtering	1
Structural and Functional Regularities of the Damage Accumulation and Failure in Metals under Dynamic Loading and Wear	1
Effect of Buffer Gases on the Energy Spectrum of Laser Plume Particles during Laser Ablation of a SiMn Binary Target	1
Effect of Annealing on the Electrical Properties of (Bi + Sn)–Pb0.75Sn0.25Тe〈Sn〉 and (In + Ag + Au)–Pb0.75Sn0.25Тe〈Sn〉 Structures	1
Synthesis and Study of Spectral-Luminescent Properties of Oxyfluoride Glasses of System BaF2–BaO–SiO2–B2O3–Bi2O3–ZnO–Y2O3 Activated by Oxides Er2O3 and Yb2O3	1
Structural and Phase Transformations in the Thiourea/Zinc Acetate System	1
Effect of Heat Treatment on the Thermoelectric and Mechanical Properties of an n-Type Bi2Te2.5Se0.5 Solid Solution Prepared via Extrusion	1
Erratum to: Energy Spectrum and Optical Absorption of Mn100 – хAlх (x = 20, 30) Compounds with the β-Mn Structure	1
Analysis of Cerium-Substituted Yttrium Iron Garnets Using Inductively Coupled Plasma Atomic Emission Spectrometry with Preliminary Decomposition in a Microwave System	1
Supramolecular Compounds of Lanthanum and Neodymium with Phthalic Acid	1
KLa(SO4)2–SrSO4 System at Temperatures above 600°C	1
Frequency-Dependent Behavior of the Conductivity of a Polymer Composite of Ultrahigh Molecular Weight Polyethylene and Nano-NiO	1