IEEE Transactions on Electromagnetic Compatibility

Papers
(The TQCC of IEEE Transactions on Electromagnetic Compatibility is 7. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-08-01 to 2026-08-01.)
ArticleCitations
Effect of a Longitudinal Aperture's Position Uncertainty on the Electromagnetic Fields Excited in a Finite Length Cylindrical Cavity72
Wave Propagation Speed and Equivalent Impedance of Dielectric-Coated Conductor Representing Lightning Return-Stroke Channel70
A Practical Technique Using Planar Coils to Make the Radiated Immunity of Specific Integrated Circuit Pins Less Dependent From PCB Orientation59
Modified Knowledge-Based Neural Networks Using Control Variates for the Fast Uncertainty Quantification of On-Chip MWCNT Interconnects54
Comments on “Transient Magnetic Shielding of a Planar Conductive Thin Screen via Exact Image Theory”54
Symbol Diversity as a Means to Make PAM-4 Modulation More Resilient in Harsh Electromagnetic Environments52
IEEE Transactions on Electromagnetic Compatibility Information for Authors51
IEEE Transactions on Electromagnetic Compatibility Information for Authors50
Statistical Characterization of Human-Induced ESD49
Application of a Machine Learning-Based Approach for Source Reconstruction and Radiation Prediction by the Spherical Wave Expansion Technique46
Complex Wire Structures Modeling in the Cylindrical TLM Method38
Circuit-Aided Dummy Design for Human Body-Worn ESD Application37
An Electromagnetic Interference Immune PAM-4 Transceiver System37
Numerical Analysis of Nonuniform Geoelectric Field Impacts on Geomagnetic Induction in Pipeline Networks34
Hybrid Absorber With Dual-Band Performance and High Absorption Rate32
Machine Learning to Predict EMI Radiation and Optimize the Structure of Pinmap Packages30
EMI Reduction Method for Wireless Power Transfer Using Broadband Topology and Spread-Spectrum Frequency Modulation30
An Efficient Model of High-Frequency Electromagnetic Field Coupling to Multiconductor Transmission Lines With the Presence of the Lossy Ground29
Analysis and Design of Microwave Absorbers Combining Surface Wave Attenuation and Reflection Bandwidth Properties28
Accurate Characterization of Electromagnetic Coupling Through Hollow Shields With TWP Cables Over an Ultrawide Frequency Range28
A Single MTLN Model Including Electrical Wiring and Current Return for Low-Frequency Common-Mode EM-Coupling Simulation28
A Trifunctional Active Frequency Selective Surface for 6G Shielding Applications28
Analysis of Cooperative Operating Concepts for Robust Data Transmission in Periodically Disturbed CAN FD Networks27
Quantitative Analysis and Prediction of EMI From Spread Spectrum of Differential Random Signaling Based on IC Source Modeling26
Three-Dimensional Rotation of FSS Unit Cell in Broadband Microwave Absorber for Large Oblique Incidence Response26
Investigation on Falling and Damage Mechanisms of UAV Illuminated by HPM Pulses26
A Conformal Frequency Selective Rasorber With Intelligent Band-Transfer Abilities via Jointly Learning Network26
Editorial Introduction to the Special Issue on Electrostatic Discharge and Immunity—From IC to System25
Share your Preprint Research with the World!24
Institutional Listings24
Time-Domain Analysis of the Impact of Advanced Building Construction Materials on the Propagation of Lightning Electromagnetic Field and Its Mitigation Using Nanoforging24
On-Chip Power Integrity Simulation Using LSI-Core Macromodels Considering Voltage Fluctuations Caused by Inter-Function-Block Interference24
Characterization and Modeling of Commercial ICs for System-Efficient ESD Design24
Self-Switchable Broadband Waveguide Protector Against High Power Microwave24
A Method for EM Information Leakage Reconstruction Based on Wavelet Analysis and Interframe Interleaved Image Fusion Algorithm23
A Hybrid Model-Based Data-Driven Framework for the Electromagnetic Near-Field Scanning23
Indefinite Impedance Matrix Techniques for Power Integrity Analysis of Multilayered Printed Circuits23
Periodic Nonuniform Sampling for Enhanced Recognition of Spread Spectrum Clocking-Based Electromagnetic Signature23
Novel Spiral-Gap Shielding Shell for a Rogowski Current Sensor23
Metamaterial-Based Angular Stable Polarization-Insensitive Hepta-Band Microwave Absorber With Salient Features for RCS Reduction and Antenna Radiation Improvement22
A Fast EMI Model Based on Equivalent Interference Sources in Medium-Voltage Cascaded H-Bridge System22
Controller Area Network With Flexible Data Rate (CAN FD) Eye Diagram Prediction22
Isogeometric Analysis of Electric Field Integral Equation on Multipatch NURBS Surfaces With Discontinuous Galerkin22
Elevating Performance of Magnetically Coupled WPT Systems Through Compact Metamaterial Integration22
Advanced Design of a Robust and Effective EMI Detector for Wired Communication Channels22
How Far Is the Far Field?21
Blank Page21
Optimized Analytical Computation of Partial Elements Using a Retarded Taylor Series Expansion21
Electromagnetic Shielding Analysis of Planar Materials Using ASTM D4935 Standard Fixture21
Effect of Strain Relief Loop Position on the RF-Induced Heating of Active Implantable Medical Devices at 1.5-T MRI21
Measurements of Induced Voltages on Overhead Distribution Line Due to Altitude-Triggered Lightning21
EMI Reduction at the Source in WBG Inverters: A Comparative Study of Spread-Spectrum Modulation and Auxiliary Switching Leg Techniques20
Modeling Wideband Radiated Emissions From PCBs in Shielding Enclosures Based on Single-Plane Phaseless Near-Field Scanning20
An Active EMI Filter for Robust Integration in Medium and High-Power AC/DC Converters19
Stochastic Time-Domain Mapping for Comprehensive Uncertainty Assessment in Eye Diagrams19
Correlation and Spectral Density Functions in Mode-Stirred Reverberation—IV. Deep Correlation for Stir Efficiency and Diagnostics19
Prediction of Lightning Currents on Fastening Assemblies of an Aircraft Fuel Tank With Machine Learning Methods19
Fast Calculation Method for Crosstalk of High-Density Printed Circuit Board by Using Machine Learning19
IEEE Transactions on Electromagnetic Compatibility Call for Papers Special Issue - “Advances of computational electromagnetics for EMC“18
IEEE Transactions on Electromagnetic Compatibility Publication Information18
Detection and Suppression of Intentional EMI Attacks to Smart Speakers18
Wideband Kriging for Multiobjective Optimization of a High-Voltage EMI Filter17
Numerical Prediction of Lightning Current Distribution Within Weakly Conductive Polymeric Materials Using the Kirchhoff Paradigm17
An Optimized Adaptive Bayesian Algorithm for Mitigating EMI-Induced Errors in Dynamic Electromagnetic Environments17
High-Frequency Modeling of Delta- and Star-Connected Induction Motors17
Identification of Microcontroller Unit Instruction Execution Using Electromagnetic Leakage and Neural Network Classification17
On the Dynamic Range for Shielding Effectiveness Measurements Using Dual or Nested Reverberation Chamber17
A High-Efficiency Crosstalk Control Method of the Staggered High-Speed via Array in PCB for Chiplet-Based System17
A Hybrid SRU-Transformer-Conv1d Architecture for High-Speed Signal Transient Prediction With Uncertainty Quantification17
An Unsupervised Learning Framework for Determining the Excitation Coefficients Using Near-Field Antenna Measurements16
IEEE Electromagnetic Compatibility Society Information16
Shielding Properties of Welded and Unwelded Wire Mesh Enclosures16
Comprehensive Black Box EMI Model of Power Electronics Converters in Supraharmonics Frequency Range15
Analysis of Higher-Order Mode Effects in the Resistively Loaded Monocone TEM Cell15
The Impact of Discharge-Point Geometry on Air-Discharge ESD Testing: Current-Waveform Shape and Intensity15
Three-Terminal Noise Source Extraction From a Qi-Based Wireless Power Transfer System for Predicting Conducted Emissions15
Regularized and Compressed Large-Scale Rational Macromodeling: Theory and Application to Energy-Selective Shielding Enclosures14
Impact of Patient Postures on the RF-Induced Heating for the Active Implantable Medical Device (AIMD) at 1.5T MRI14
Near-Field Shielding Analysis of Conformal Coating Materials for Integrated Circuits14
Flexible Dual Flower-Shaped FSS for Conformal Applications With Low Aberration of Far-Field Pattern14
Lightning Attachment Behavior of Metamaterial Plate From Lightning and Switching Impulse Discharge Tests14
A Miniaturized Dual-Polarized Energy Selective Surface for HPM Protection14
Frequency-Selective Rasorber Based on High-Q Minkowski Fractal-Shaped Resonator for Realizing a Low Radar Cross-Section Radiating System14
An Analysis of Electromagnetic Signatures From Triangularly Modulated Spread Spectrum Clocking Signals14
Transmission Line Modeling and Crosstalk Analysis of Multibraided Shielded TWP/Twinax Cables14
IEEE Transactions on Electromagnetic Compatibility Information for Authors13
Modeling Mutual Inductance in Horizontal Inductors: A Simple Analytical Method Accounting for Multidirectional Near-Field Coupling13
Table of Contents13
Investigation of Effects and Protection from UWB EMP on UAVs13
Frequency Characteristics of Insertion Loss and Loop Gain of VSCC Feedback Active EMI Filters13
Editorial: Introduction to the Special Issue on AI, Machine Learning, and Deep Learning: Advances and Applications for EMC13
Techrxiv: Share Your Preprint Research with the World!13
Indoor 1D-Localization of Omnidirectional Power-Modulated Jammers: A Machine Learning Approach With Rapid Database Generation13
Design and Development of a Bounded-Wave High-Altitude Electromagnetic Pulse Simulator Incorporating Self-Steepening Marx Generator and Antenna Integrated Pulse-Shaping Switch13
IEEE Electromagnetic Compatibility Society Information12
A New Approach to the Evaluation of the Lightning Horizontal Electric Field Over a Lossy Ground Based on the Time-Domain Cooray–Rubinstein Formula Fitted by Orthogonal Polynomials12
Adapter for the Impedance Measurement of Power Cable With an Impedance Analyzer12
High-Frequency Estimation of Shielding Effectiveness Without Inner Sensor in Reverberation Chambers12
Design of Planar Magnetic Integrated Symmetrical Harmonic Filter With Reduced EMI Noise in the Grid-Connected Inverter12
Time-Domain Electromagnetic Characterization of Reaction Wheel for Space Applications12
Bended Differential Line Routing Adaptive Designed by Periodic Nonuniform Structure With Ultrawideband Mode Conversion Noise Suppression12
Mechanisms of the Susceptibility of a Stepper Motor Control System to Narrowband IEMI Injected Through Pulse Signal Lines12
A Physics-Based Model for Snapback-Type ESD Protection Devices12
Equivalent Force Extraction Methodology for Electrical Component Induced PCB Vibration12
An Area-Averaged Conformal Technique for the Electromagnetic Simulations of Debye Medium12
Numerical Assessment of Human EMF Exposure to Collocated and Distributed Massive MIMO Deployments in an Industrial Indoor Environment12
IEEE Open Access Publishing12
Systematic Analysis of an Innovative DDR5 Connector Design12
Model-Order Reduction of the Full-Wave Partial-Element Equivalent-Circuit (PEEC) Method Based on a Modal Approach12
Equivalent Source Investigation for PCB Vibration Excited by a Multilayer Ceramic Capacitor12
EMC Issues in High-Power Grid-Connected Photovoltaic Plants: An Update After 15 Years12
On the Robustness of Discrete-Time and Continuous-Time $\Sigma \Delta$ Modulators to Conducted RFI11
Estimating the Perception Threshold of Electrostimulation and Heating for Radiofrequency Contact Current11
Identification of Critical Frequencies in Wideband Near-Field Spatial Scans11
Lead-Specific Optimization of Transfer Function Validation Pathways for Magnetic Resonance RF Safety Evaluation11
A Slot-Type Ez Probe With a Lower Effective Center11
Massively Parallel Hybrid TLM-PEEC Solver and Model Order Reduction for 3D Nonlinear Electromagnetic Transient Analysis11
Single-Channel Blind Source Separation for Periodic Electromagnetic Switching Noise11
Accurate Mathematical Parameter Determination for Double-Exponential Impulse Waveforms With Specified Parameters11
IEEE Open Access Publishing11
Design of a Novel Low-Pass Filter Cable Utilizing a Defected Conductor Transmission Structure With Cascaded Isosceles U-Shaped Resonators11
Techrxiv: Share Your Preprint Research with the World!11
Efficient Prediction of HEMP Coupling Response to Multilocation Transmission Lines Within a Rectangular Enclosure With Small Aperture11
Analysis and Experiments Concerning Surges Transferred Between Power Transformer Windings Due to Lightning Impulse11
Plane-Wave Coupling Analysis of a Distribution Line With a Multipoint Grounded Shield Wire and Surge Arresters Using the Three-Dimensional FDTD Method11
Innovations in Connector Terminal Design for Improved Signal Integrity in DDR5 Memory11
A Novel Dynamic Scenario Equivalence Construction Method for Radar Electromagnetic Compatibility Prediction11
An Ultra-Thin Metal Materials for Stable Shielding of Near- and Far-Field Electromagnetic Waves11
Institutional Listings11
An EME-Reduced FlexRay Transmitter Architecture Employing a Common-Mode Feedback Control11
Prediction and Analysis of Radiated EMI From a Wafer-Level Package Based on IC Source Modeling11
Compressed Sensing for Efficient Near-Field Scanning of Embedded Systems11
Modeling Nonlinear Black-Box Conducted Immunity of Mixed Analog-Digital Integrated Circuits Using Particle Swarm Optimization (PSO) and Piecewise Volterra Series11
Cross-Talk Between Superconducting Microstrip Transmission Lines11
Assessing the Probability of Detection in a Frequency-Selective EMD Detector: A Design Perspective11
Detection Circuits for System-Level Signal and Power Noises Due to High-Power Electromagnetic Pulses10
Assessment of Frequency-Dependent Parameters of Stratified Soils for Lightning Response of Earth Electrodes10
A Prefabricated Programmable Metasurface Reverberation Chamber10
Institutional Listings10
An Exact Analytical Approach to Mutual Inductance Calculation in Wireless Power Transfer Systems Lying on Earth Structures10
Accelerated Evaluation of Quasi-Static Interaction Integrals via Cubic Spline Interpolation in the Framework of the PEEC Method10
Lightning Transient Impulse Problem of Substation Grounding Grid in Multilayer Horizontal Layered Soil Considering Soil Ionization Effect and Frequency Characteristics10
Modeling of the Mode Conversion Effect Induced by Asymmetry/Coating in Floating Multiconductor Cables10
Frequency Stirring Effects on Reference Antenna Efficiency Measurements in Reverberation Chambers10
Lightning-Induced Transients in Buried Power Cables: A Study of Soil Dissipation Effects10
Data-Driven Simulations of the Lightning Return Stroke Channel Properties10
EMC Society Policy10
On the Electromagnetic Fields Excited in a Finite-Length Circular Cylindrical Cavity by Plane Wave Incidence on a Longitudinal Aperture10
Direct Lightning Overvoltage and Flashover Risk in Complex Distribution Line Network Considering Electromagnetic Coupling From Lightning Channel10
IEEE Electromagnetic Compatibility Society Publication Information10
A Novel Decoupling Method to Reduce Radio Frequency Interference (RFI) Noise From High-Speed Connector10
Comparison of Shielding Effectiveness of Different Shielding Methods for Multi-Core Cable on Lightning Surge Current10
Efficient PEEC Iterative Solver for Power Electronic Applications10
Design of Broadband Circuit Analog Absorber With Optimal Thickness for Stable Angular Response in C, X, Ku, and K Bands10
Introducing IEEE Collabratec10
IEEE Transactions on Electromagnetic Compatibility Information for Authors10
A Full-Wave-Transmission-Line Hybrid Method for Vertically Laid Shielded Cable Illuminated by HEMP10
Corrections to “Ground-Return Parameters of Submarine Cables Buried in the Seabed”10
Impedance Reconstruction of Airborne Coaxial Cable for Non-Uniformity Test9
Compensating Method of Equivalent Current Sources of LSI-Core Macromodel Considering Voltage Fluctuations in On-Chip Power Distribution Network9
Conservative Analytical Assessments of Localized RF Exposure From Small Magnetic Field Sources9
Efficient Noninvasive Fault Injection Method Utilizing Intentional Electromagnetic Interference9
A Novel Diagonal-Laminated Fe-Based Nanocrystalline Ribbon Shielding Structure in Wireless Power Transfer Systems9
Effect of Switch Geometry on Responsiveness of Parallel-Plate Blumlein Lines9
Natural-Modes Expansion of Microwave Fields Emitted by Ultra-Short Pulse Laser Illumination of a Conducting Wire9
Uncertainty Quantification in PEEC Method: A Physics-Informed Neural Networks-Based Polynomial Chaos Expansion9
A Marching-on-in-Time Method of Moments for Computation of Transient Potential Rise of Grounding Grids Exposed to Lightning Strikes9
On the Correlation Between Near-Field Scan Immunity and Radiated Immunity at Printed Circuit Board Level – Part II9
Effect of Eddy Current for Photovoltaic Module on Lightning-Induced Overvoltage Caused by Electromagnetic Coupling9
An Efficient Ray-Tracing Approach for the Isolation Assessment of Co-Located Base Station Antennas at mmWave9
A Neural Network Based Calibratable Arc Model for Air Electrostatic Discharge9
Bayesian Compressive Sensing Enabled EMI Source Localization in Shielding Enclosures From Complex and Phaseless Near-Field Scanning9
An ANOVA Method to Rapidly Assess Information Leakage Near Cryptographic Modules9
Ultra-Thin SSPP-Based Sheet for Suppressing Microwave Radiated Emission in SiP Modules9
A Modeling Method and Characteristics Study of EMI in 12-Phase Rectifier Circuit With Actual Switching Process Based on State Transition9
Design of Miniaturized Frequency Selective Rasorber Based on Complementary Bandpass FSS for 5G Applications9
Table of Contents9
A Reconfigurable Frequency Selective Rasorber With Switchable Transmission/Reflection/Absorption Band9
Single-Conductor Transmission-Line Model for Bent Wire Structures9
Impact of BGA Package Failure on Crosstalk in Microwave Circuits Using GSG Structure9
Determining the Shielding Effectiveness of a Partially Filled Functional Cabinet via Radiated Emission Measurements and Shielding Effectiveness Measurements9
Electromagnetic Immunity of Pacemakers and Implantable Defibrillators to Wireless Power Transfer Systems for Automotive: A Provocative Study9
A Rational Design Procedure for Absorbers of Square-Loop-Shaped Resistive Frequency Selective Surface Placed on Glass/Epoxy Laminate9
UWB Far-End Crosstalk Mitigation With “LL” Shaped Defected Tabbed Routing Structures9
An Effective Method Using Reverberation Chambers to Measure TRP From Mobile Phones and Power Absorbed by User Body9
Impulse Efficient Optimum Impedance Grounding Electrode Configuration for Lightning Transients9
Table of Contents9
Theoretical Estimation on Maximum-to-Maximum Ratio of the Total Electric Field to Its Rectangular Component Within Reverberation Chambers9
Joint Tailoring of Electromagnetic Radiated Emission and Susceptibility Limits for Coexistence of Multiple Radio-Frequency Devices9
Analysis of the Shielding Effectiveness of Thin Wire Cages by a Hybrid DGTD-FDTD Method9
Accelerating Stochastic Lightning Attachment Simulations for the Estimation of Lightning Incidence to Overhead Lines9
Passive Intermodulation Model Based on Conductors Cross-Section for Printed Transmission Line8
Polarization- and Incident-Angle Independent Wideband Microwave Absorber Using Ruthenium Oxide on a Single-Layer LTCC Substrate8
Reduced-Order Modal Solution of the Full-Wave Method of Moments Based on a Quasi-Static Eigenvalue Approach8
IEEE Open Access Publishing8
An Effective Parameter to Characterize the Rician Channel in Hybrid Stirred Reverberation Chamber8
Evaluation of Conducted Electromagnetic Interference Behavior of Copper Vapor Laser8
Miniaturization of a Fully Metallic Bandpass Frequency Selective Surface for Millimeter-Wave Band Applications8
IEEE Electromagnetic Compatibility Society Information8
A Multi-Parameter Statistical Inference Model for the Thermal Burnout Effect of LNA Excited by Repetitive Electromagnetic Disturbances8
Transient Voltage Suppressor Diode Array Protection Circuits with Reducing Loading Effect under High-Power Microwave Pulse Injection8
A Two-Step Approach for the Analysis of Bulk Current Injection Setups Involving Multiwire Bundles8
FDTD Computation of Ground-Level Electric Fields Generated by Compact Intracloud Discharges8
Statistical Analysis of Electromagnetic Field Radiated by Printed Circuit Board Inside the Perforated Shielding Enclosure in Time-Domain8
Modeling of 10 kV Distribution Transformer Excited by Three-Phase Common Mode Transients8
Optimized CPML for Emulating Electromagnetic Absorbers in Simulations and Its Optimization Utilizing Artificial Neural Network8
Evaluation Method of Noise Electromagnetic Radiation Interference Effect8
Institutional Listings8
On the Improvement of Shielding Effectiveness Measurements of Materials and Gaskets in Reverberation Chambers8
Testing and Assessment of Small Unmanned Aerial Vehicle Susceptibility to Environmental Radio Frequency Interference8
Experimental Study of a Structure With Triple Modal Reservation Before and After Failures8
Shielding Effectiveness Improvement of a Conducting Slab via Layering: Effects of Layer Count and Gap Thickness8
Effect of Shielding and Drain Wire on Lightning-Induced Currents in Rotorcraft Cables8
Evaluation of Failure Threshold of Digital Control Circuit Under Mixed Electromagnetic Interference of Electrical Fast Transient and Surge8
Conformal Miniaturized Angular Stable Triband Frequency Selective Surface for EMI Shielding8
A Shielded Planar Loop Magnetic Field Probe in PCB Technology for EMC Measurements and Calibration Method8
A Comparison of State-of-the-Art Evaluation Criteria for Field Uniformity Assessment8
Polynomial Chaos Based Statistical Analysis of the Shielding Effectiveness of an Enclosure With Apertures Under Multiple Uncertainties8
Active Frequency Selective Rasorber Based on Fiber-Reinforced SiO$_{2}$ Ceramic Matrix Composite8
Accelerate IEMI Evaluation in the Design Stage Using Parametric Vector-Fitting8
Blank Page8
A Novel Automated System for Evaluating AIMD Safety in MRI RF Fields8
Introducing IEEE Collabratec8
Analytical Modeling of Microwave Transmission Through Metasurfaces Made of Perforated Metal Plates, Arrays of Metal Patches, and Wire Grids8
Broadband Active Common Mode EMI Suppression of a GaN Motor Inverter With Adaptive FIR Filters Using Delay-Compensated Gate Control Signals8
EMI Prediction and Optimization for Pinmap Design Using Deep Transfer Learning and an Enhanced Genetic Algorithm8
An Efficient PEEC-Based Method for Full-Wave Analysis of Microstrip Structures8
Analysis of Grounding Structure Effects on Automotive Ethernet Using Unshielded Twisted Pair: Experimental and Simulation Study Under Bulk Current Injection Testing8
Indoor Zoning Methodology for Ultra-High-Field MRI Rooms7
Degradation of Dynamic Range for Shielding Effectiveness Measurements Due to Long-Term Use of a Dual Vibrating Intrinsic Reverberation Chamber7
Enhanced Sparse Polynomial Chaos Expansion for Electromagnetic Compatibility Uncertainty Quantification Problems7
A Correction to Rusck Expression for the Evaluation of Lightning-Induced Overvoltages for High-Resistivity Ground7
Superior Electromagnetic Shielding for Non-Bearing Masonry Walls Using Innovative Conductive Infills and FRCC Coatings7
A Combined RF and Gradient Network for MRI Safety Testing of Implantable Devices7
Efficient Angle Calibration Method for Peak Beam Measurements in Transmitarray-Based Compact Antenna Test Range7
High-Power Microwave Threat to a Notional Earth-Observing Space Telescope7
A Machine Learning Based Hybrid Algorithm for Partial Discharge Localization in Power Transformers7
Design Methods and Characteristics of Active EMI Choke Using a Customized IC for Real 11-kW On-Board Charger7
Artificial Neural Networks With Fast Transfer Learning for Statistical Signal Integrity Analysis of MWCNT and MLGNR Interconnect Networks7
Dipole-Moment Source Modeling Using Near-Field Scanning With a Finite-Impulse-Response Filter7
Rotating-Stirring Process and Circular Time Series7
Electrostatic Field by Thunderclouds: Threat at Ground Level7
IEEE Electromagnetic Compatibility Society Publication Information7
Semitopological Expansion for Link Decomposition Analysis7
Comparative Study of Thin Layers Modeling in Electromagnetism: Application to Multilayer Magnetic Shielding7
On the Accuracy of Correlation Estimator Based Fault Location Methods in Transmission Lines via Polynomial Chaos and Regression Analysis7
Discharge Development Process of Combined Air Gaps for Overhead Transmission Line Live-Line Work Under Low Air Pressure and Positive Switching Impulses7
A Novel Method for Tailoring the Electromagnetic Radiation Emission Limits of Equipment in Complex System7
Efficient EMI Analysis and Self-Shielding Design Method for Pin Map of System-in-Package7
Institutional Listings7
0.15229988098145