European Journal of Wood and Wood Products

Article	Citations
Drying of green veneer hollow tubes monitored using stereo digital images correlation	56
Correction to: Research and prospects of bamboo bolts in China: state of the art	32
Correction: Wood fiber - sodium silicate mixtures for additive manufacturing of composite materials	28
Steaming or freezing improves decay resistance, copper leaching and wood/copper interactions of micron CuO/silica sol treated poplar (Populus tomentosa Carr.)	25
Correction: Comparison of classical beam theory and finite element modelling of timber from fibre orientation data according to knot position and loading type	24
Effect of blending L-lysine-modified montmorillonite into urea-formaldehyde resin on formaldehyde emission and physicomechanical properties of medium density fiberboard	23
Effect of microwave-assisted softening on the physicochemical properties of Moso bamboo	23
Application of a catechol-polyamine co-deposition method for silane grafting of bamboo fiber for improved interface compatibility with poly (lactic acid) matrix	22
A comparison of NIR spectroscopy and colour measurements for the classification of radiata pine timber thermally modified over a narrow temperature range	22
Interlaminar shear properties of glulam made of heat-treated laminates	22
Fabrication of a durable hierarchical structure towards superhydrophobicity using functionalized ZnO/PDMS on maleic rosin-modified wood	21
Development of swelling pressure in paulownia and Norway spruce during moisture absorption	21
Study on properties of radiata pine wood treated with furfuryl alcohol as fretboard materials for string instruments	20
Prediction of milling performance of thermally modified wood based on machine learning	19
Wood density of 38 Dalbergia and 29 Diospyros Malagasy species and its relationship with climate and tree diameter	19
Experimental investigations and model validation of compression rheological behavior in bamboo scrimber during the hot-pressing process	19
A study on beam-to-column moment-resisting timber connections under service load, comparing full-scale connection testing and mock-up frame assembly	19
Hydroxymethylation of technical lignins obtained from different pretreatments for preparation of high-performance rigid polyurethane foam	18
Effect of drilling resistance measurement on residual load capacity of Scots pine (Pinus sylvestris L.)	17
Fiber properties and chemical compositions of sheaths from three selected sympodial bamboo species as raw materials for papermaking in Yunnan of China	17
Preliminary comparative study on the behaviour of highly-loaded glue laminated timber and wood-CFRP composite beams exposed to local fire	16
Impact resistance of birch plywood sheets - experimental and numerical approaches	16
Cost optimization of cross-laminated timber panels in one-way bending	15
Regional assessment of mold growth risk in light wood-framed wall envelope based on meteorological data-driven and neural network model	15
Impact of a 2-year environmental exposure on colour, structure and chemistry of cork	15

Technological properties homogenization on sapwood and heartwood of short rotation teak wood by non-biocide method based on chemical and thermal treatments	15
Experimental investigations on the behaviour of structural-sized wood-CFRP composite beams in local fire	15
The relationship between bending and tension strength of Irish and UK spruce and pine	15
Combined treatment of wood with thermosetting resins and phosphorous flame retardants	14
Pretreatment of pine and poplar particleboards with Pleurotus ostreatus (Jacq.): physicomechanical and chemical properties of wood, potential of solid fuel and biogas production	14
Microwave-assisted modification process to enhance the technological properties of maritime pine for sustainable construction applications	14
Thermal and acoustic insulation properties of wood plastic composites (WPCs) for interior housing applications	14
Correlations between moisture expansion and flexural properties of bamboo strips in response to different loading rates	14
A high curing efficiency sucrose-based adhesive via two-step modification by toluene-4-sulfonic acid and methylenediphenyl diisocyanate	14
The effect of alternating freezing and high temperatures on the tensile-shear strength of glued Norway spruce (Picea abies (L.) H. Karst.) and European larch (Larix decidua Mill.) wood	14
A method of using a combination of multiple chemical additives to improve the performance of wood (round tenon) rotary friction welding	13
MUF resin incorporating SiO2 and TiO2 nanoparticles: characterization and performance as a plywood adhesive	13
Comprehensive analysis of glulam delamination through finite element modelling considering heat and mass transfer, plasticity and fracture mechanics: a case study using high density hardwood	13
Augmentation in fragrant agarwood oil quality by fermentation with a microbial consortium of bacterium (Microbacterium oxydans) and fungus (Penicillium aethiopicum)	13
Experimental study on the burning behavior of wood with radial crack under fire conditions	13
Effect of the P-factor on the prehydrolysis process of eucalyptus wood for dissolving pulp production	13
Falling Damage Behavior Analysis and Degree Prediction for Wooden Pallet Based on Piezoelectric Effect and Acoustic Emission	13
Propolis extract as a bio-based modifier of urea-formaldehyde adhesive in particleboard production	13
Simulation analysis of the circular sawing process of medium density fiberboard (MDF) based on the Johnson–Cook model	12
Alternative sustainable Mexican tropical woods for classical guitar frameboards and fretboards	12
Influence of thread parameters on the withdrawal capacity of wood screws to optimize the thread geometry	12
Utilizing pyrolysis cleavage products from softwood kraft lignin as a substitute for phenol in phenol-formaldehyde resins for modifying different wood species	11
Editorial	11
Investigation on the influence of particle size and surface-specific adhesive amount on mechanical properties and sorption behavior of particleboard	11
Analysis of the application status of terahertz technology in forestry	11
Basalt grid reinforcement of lightweight plywood	11
The impact of primers for wood bonding on beech wood’s Young’s modulus	11
Effects of polyethylene glycol on the flexibility of cold-setting melamine–urea–formaldehyde resin	11
Structure and physical properties of high-density bamboo scrimber made from refined bamboo bundles	11
The effect of plantation grown pine species selections and processing parameters on veneer recovery for plywood production	11
Size effects on the bending strength of Chinese larch pine laminated veneer lumber	11
Pretension loss in bolted timber joint under external tensile load	10
Impact behavior of plywood core laminated with flax-epoxy composite skin	10
Enhanced potential of fast-growth Eucalyptus woods for construction: two-step thermal treatment under dual atmospheres	10
Value chain analysis of domestic oak wood processing in the Republic of Korea	10
Production of wood-based panel from recycled wood resource: a literature review	10
Effects of beam power and feed rate in the process of cutting fresh wood with a CO2 laser on water contact angle on the cut surface	10
Plywood gussets in mechanical timber connections: quantify the stress spread angles under major tension loads	10
Photo-stabilization effect of extractives on the photo-degradation of Red pine (Pinus koraiensis Sieb. et Zucc.)	10
Evaluation method of compression parallel to grain stiffness in wood and relationship between stiffness and shape of contact surface	10
Activated carbons prepared from stump wood of various tree species by chemical activation and their application for water purification	9
Characterization of cork features of Erythrina mulungu and Enterolobium gummiferum in view of a potential valorization and conservation of forest species in the Cerrado bioma	9
Mechanical and thermal analysis of basalt grid reinforced particleboards containing flame retardants	9
Effect of steaming and furfuryl alcohol impregnation pre-treatments on the spring back, set recovery and thermal degradation of densified wood of three tropical hardwood species	9
Capacity models for timber under compression perpendicular to grain with screw reinforcement	9
Fate of organic solvent-soluble extractives and arabinogalactan during brown rot degradation of siberian larch heartwood	9
Physical and morphological characterization of eucalyptus wood (Eucalyptus camaldulensis Dehnh.) from seaside windbreaks belts in Central Italy	9
Focus on hydrochars produced from hydrothermal liquefaction of beech wood, soda lignin and black liquor	9
Measurement of surface-checking in sliced lamellae-based engineered wood flooring using digital image correlation	9
Comparative study on the machining performance of wood–plastic composites with different wood flour content	9

Phenol formaldehyde resin impregnation of spruce wood to improve the dimensional stability and acoustic performance of harp soundboards	9
Preliminary evaluation of polydimethylsiloxane and hydrophobic silica nanoparticles to improve water repellency and boron leachability in wood	9
Mechanical, thermal and rheological properties of polylactic acid (PLA)/epichlorohydrin modified pine wood flour (EWF) composites	9
Eco-friendly laminates for extreme environments: potential for application in high durability structures	9
Tropical mobola plum (Parinari Curatellifolia): a full characterization of wood and bark within the scope of biorefineries	9
Carbon-relative molar mass is a new parameter for experimentation with different biomasses. Prediction of higher heating value case study	9
Study on in-plane compressive performance of cross-laminated bamboo and timber (CLBT) wall elements	9
Long-term hygrothermal performance assessment of on-site wood-framed walls based on sensor monitoring and machine learning	9
Efficacy of slow pyrolysis liquid from sugarcane bagasse for wood protection and its leaching properties	9
Study on mechanical properties of seawater sea-sand concrete columns confined with bamboo sheets	9
Bonding strength between spruce glulam and birch plywood at different load-to-plywood face grain angles	8
Quality traits of plantation Eucalyptus nitens logs impacting volume and value recovery of structural sawn boards	8
Investigations on chemical changes of surface contact-charred Norway spruce (Picea abies L.) using ATR-FTIR spectroscopy and pH value measurements	8
The effect of modified paraffin on the bonding performance of urea-formaldehyde adhesive	8
Magnesium silica gel crystallized in the cell lumen of Chinese fir to construct porous structure for filtering toxic fumes	8
In situ structural changes of voids in OSB in three-point bending test	8
Development of an anisotropic damage model for orthotropic quasi-brittle materials: application to wood	8
Effect of epidermis and pith ring presence on bamboo shrinkage behaviors	8
Towards circular economy by valorization of waste upholstery textile fibers in fibrous wood-based composites production	8
Studying of the effects of some varnish types used in the furniture industry on woodworking performance of laser	8
A method for risk of fracture analysis in massive wooden cultural heritage objects due to dynamic environmental variations	8
Rolling shear failure damage evolution process of CLT based on AE technology and DIC method	8
Characterization of particleboards of African mahogany sawdust made with tannic powders of Bridelia and African locust bean pods	8
Optimization of pressing parameters for the best mechanical properties of wood veneer/polystyrene composite plywood using artificial neural network	7
Shear capacity and slip modulus prediction of LVL and LVL-C nailed connections for LVL-I-beams	7
Green manufacturing of bamboo self-bonding composites with superior mechanical and electromagnetic interference shielding performance	7
Enhancing water resistance of medium density fibreboards via periodate oxidation of thermomechanical fibres	7
A new protocol for rapid assessment of bond durability of bio-based pipes: bamboo winding composite pipe as a case study	7
In-situ citric acid-glycerol esterification: a novel bio-based modification for high-performance and durable poplar wood	7
Aldehyde-amine crosslinked starch-based high-performance wood adhesive	7
Assessment of fire-retardant treatments and their impact on the fire performance and bonding properties of aspen and silver birch veneers	7
Wettability and surface interactions of natural and thermally modified beech wood with water and water-based coatings: the effect of surface pre-treatment type	7
The physical, mechanical, and chemical properties of black cherry tree wood (Prunus serotina Ehrh.) and its susceptibility to fungal decomposition in areas where it is secondary and invasive: a case s	7
Integrated production of biochar, soot and ash from construction wood waste in a single reactor system	7
Experimental study of hybrid pine-birch glued-laminated timber beams assisted by digital image correlation technique	7
Study of particle packing of plywood, Eucalyptus spp. and Pinus spp. from construction and demolition waste	7
Effect of the temperature and grain direction on the stress relaxation behavior of PCM-impregnated and nonimpregnated wood under tensile and bending stresses	7
Shear strength and stiffness of glued-laminated timber made from European ash (Fraxinus excelsior L.)	7
Adhesive free Melaleuca rhaphiophylla (Swamp Paperbark) bark as an engineered wood product	7
Achieving maximum strength in oak wood (Quercus robur, L.) bonding: techniques for surface preparation and adhesive application	7
Comparing the suitability of domestic spruce, beech, and poplar wood for high-strength densified wood	7
Identification of defects on bamboo strip surfaces based on comprehensive features	7
Effects of pressurized N2 and steam as heating medium on the set recovery of surface compressed white poplar (Populus tomentosa)	7
Evaluation of in-plane shear performance of CLT using the asymmetric four-point bending test method and detailed examination of the method	6
Copper tolerance of Fomitopsis ostreiformis: implications for above-ground timber applications	6
Moisture distribution in cross laminated timber (CLT) made from heat-treated wood	6
Development of a methodology for the production of nanostructured polymeric biocomposites with cellulose nanocrystals	6
Investigation of the ınnovation of traditional wood marquetry technique with CNC laser technology: a design study	6
Protective role of DTPA against Hylotrupes bajulus L. infestations by targeting metal ion incorporation in larval mandibles	6
Tropical wood acoustics: impregnation effects on Cajuput, Mangium, and Mango woods for sustainable building materials	6
European beech potential for agricultural land afforestation: an anatomical and wood quality perspective	6
Alternated cross-laminated timber (aCLT) panels: development and mechanical characterization	6
Dynamic and quasi-static evaluation of stiffness properties of CLT: longitudinal MoE and effective rolling shear modulus	6
Analysis of the interaction between internal porosity and oriented strand board performance using X-ray computed tomography	6
Digitalization of small and medium sized sawmills in Austria: a survey about business processes	6
Energy and structural optimization of mid-rise light-frame timber buildings for different climates and seismic zones in Chile	6
Incorporation of oxidized paraffin into a composite with modified polyethylene wax improves the surface coating and interfacial properties of hot-waxed wood	6
Compressive performance of laminated bamboo columns with glass fiber reinforced polymer	6
Embedment behaviour of fully threaded bolts in glued laminated timber	6
Measuring elastic constants of wood through static bending using a strain gauge	6
Low-cost mussel inspired poly(catechol/polyamine) coating of bamboo fibers surface and its use as a reinforcement of PLA matrix	6
Guidance for material selection in wood claddings based on end-user acceptance of maintenance and care	6
Wood modification with phenol urea formaldehyde (PUF) resin: the influence of wood species selection on the dimensional stability	6
Surface roughness of thermally modified and unmodified selected wood species after sanding	6
Transforming inferior short-rotation teak: unleashing superior durability and stability with lactic acid-based bio-treatments	6
Trichoderma atrobrunneum associated with yellow stain defect of cork planks and critical values of TCA for wine cork stoppers industry	6
Identification of wood structure related vibrational characteristics of wooden plates from Norway spruce (Picea abies [L.] Karst.) by high resolution laser scans	6
Influence of the compatibilizer on plywood bonded with an adhesive film made of recycled expanded polystyrene foam	6
Hydrophobic and hygroscopic properties of cellulose treated with silicone agents	6
Effect of wood moisture content and adhesive open time on the adhesion strength of wet bonded Pinus radiata wood	5
Boosting algorithms for predicting the bond properties of timber and fiber reinforced polymer (FRP) under thermal cycling using single-lap shear tests	5
Comparative study of four timber wood species in southern Mali (West Africa) by combining FTIR spectroscopy and multivariate analysis	5
Editorial	5
Novel thermally regenerated flexible cellulose-based films	5
Study on infection behavior and characteristics of poplar wood dyed by Lasiodiplodia theobromae	5
Bayesian modeling of finger joints’ tensile and bending properties considering censored data	5
Sanding performance and failure progress of precision-shaped abrasive belt during sanding MDF	5
Synthesis of phenolic resin using furfural as a sustainable partial alternative to formaldehyde and its impact on wood dimensional stability	5
Physico-mechanical properties of arc-laminated giant bamboo using thermally modified segments	5
Performance of treated wooden electricity distribution poles in service in Uganda	5

A two-step physical method for fabrication of injection-moulded wood-based composite with NaOH/urea solution	5
Impact bending strength and structural properties of hardwood: branch versus stem	5
Stakeholder perceptions of wood-based products in the built environment: a literature review	5
Delignification treatment of birch veneer for manufacturing of highly curved laminated veneer lumber (LVL)	5
Radial variation in anatomical wood characteristics and physical properties of Paulownia elongata x Paulownia fortunei hybrid Cotevisa 2 from fast-growing plantations	5
Effects of hydrolytic and freeze-thaw aging on the performance of spruce wood	5
Effect of moisture on the edgewise flexural properties of acetylated and unmodified birch plywood: a comparison of strength, stiffness and brittleness properties	5
Sorption properties of paper treated with silane-modified starch	5
Phytochemical composition and biological activities of bark extracts from seven industrially relevant tree species	5
Enhancing mechanical properties of 3D-printed PLA/wood composites: a metaheuristic and statistical perspective	5
Particle tracking velocimetry as a method for chip ejection studies during groove milling of particleboard	5
Mineralization of heat-treated fir wood with magnesium oxychloride: mechanical properties	5
The effect of densification on physical and mechanical properties of bamboo Dendrocalamus asper	5
The influence of fracture energy on wooden structural members due to contact explosion	5
Predicting moisture content in kiln dried timbers using machine learning	5
Polysiloxane-consisting wood coating with photodynamic mold resistance	5
Prediction of water absorption and swelling of thermally modified fir wood by artificial neural network models	5
Research and prospects of bamboo bolts in China: state of the art	5
Gap-filling properties of adhesives used for cross-laminated timber	5
Mechanical properties of aramid fiber reinforced polymer confined laminated bamboo lumber column under cyclic loading	5
High strength hydrogel using phenolated lignin	5
Characterization of unary precursor-based geopolymer bonded composite developed from ground granulated blast slag and lignocellulosic material residues	5
Prediction of dust emissions during CNC milling of spruce and pine with machine learning	5
The volatile organic compounds release from acid-alkali pretreated moso bamboo during heat treatment	5
Assessment of the relationships between extractive content, mould growth, and drying methods of Scots pine wood using multivariate data analysis	5
Chemical changes of steamed timber during short-term photodegradation monitored by FTIR spectroscopy	5
Investigation on the mechanical property of fiber reinforced recycled composite wood and its constitutive model	5
Bending properties of LVL made by Eucalyptus globulus Labill. and its potential for hybrid glulam beams	5
Ternary modification of poplar wood with lactic acid, taurine, and boric acid for enhancing physical properties and fire safety	4
Influence of the moisture content on the fracture energy and tensile strength of hardwood spotted gum sawn timber and adhesive bonds (gluelines)	4
Reduction of formaldehyde emission from urea-formaldehyde resins with nanolignin modified by deep eutectic solvent	4
Characterization of randomly oriented strand boards manufactured from juvenile wood of underutilized wood species	4
Highly efficient preparation of bamboo scrimber: drying process optimization of bamboo bundles and its effect on the properties of bamboo scrimber	4
Kraft lignin biorefinery: from pulping side streams to concrete plasticizers	4
Image-based mesh generation for constructing a virtual representation of engineered wood product samples	4
Effect of epidermis and pith ring presence on bamboo shrinkage behaviors	4
Comparison of classical beam theory and finite element modelling of timber from fibre orientation data according to knot position and loading type	4
Robustness of texture-based roundwood tracking	4
Characterization of wood dust emission according to some wood species in 3D machining applied with CNC machine	4
Evaluation of natural weathering and thermal degradation behavior of furfurylated bamboo strips at different weight percent gain	4
Engineered laminated bamboo sandwich panels: a lightweight, cost-effective and carbon-negative solution for sustainable construction	4
Bark based porous materials obtained with a simple mechanical foaming procedure	4
Crack size in coating and moisture problems comparing thermally modified and native spruce window frame profiles using hygrothermal simulations	4
Modelling the process of splitting wood and chipless cutting Pinus sylvestris L. wood in terms of designing the geometry of the tools and the driving force of the machine	4
Compressive behavior of glued laminated bamboo at elevated temperatures: experimental evaluation and damage constitutive model	4
Nanocellulose functionalized with ethylenediamine as a modifier of urea-formaldehyde adhesive in particleboard production	4
The use of shank-containing screws to provide the adhesion pressure needed during CLT manufacturing using young Eucalyptus wood	4
Experimental and numerical study on the mechanical behavior of curved glulam structures	4
Study on biological dyeing technology for directional pattern regulation of poplar infected by Lasiodiplodia theobromae	4
Comparison of continuum damage models for nonlinear finite element analysis of timber under tension in parallel and perpendicular to grain directions	4
Effect of applied standard wood machining fluid on colour and chemical composition of the machined wood surface	4
Influences of extractives on absorption and desorption of many sorbents in two tropical woods	4
Glulam Timoshenko–Ehrenfest beams with interlaminar debonding and flexibility of finger joints	4
Porous silicon modified wood as a high-efficiency solar steam generator	4
Insights into the combustion behavior of cork and phloem: effect of chemical components and biomass morphology	4
Impact of location and forest habitat type on values of selected parameters and structural indices of wood fibres of silver birch (Betula pendula Roth.) in Poland	4
Experimental investigation on the physical and mechanical properties of P. edulis bamboo and their correlations	4
Deformation measurement of twisted timber beam using UAV SfM photogrammetry and a new feature extraction algorithm	4
Tung oil improves dimensional stability of flattened bamboo	4
Properties of sandwich boards with a core made of bio-composite particleboard containing wood particles and walnut shells	4
A production-oriented review of high-frequency measurement methods for forest products	4
Colour change of UV-irradiated and heat-treated wood species during 14 years of storage in total darkness	4
Effective strategy for fabricating surface impregnated and unilaterally densified wood with furfuryl alcohol/flame retardants for enhanced mechanical performance and flame retardancy	4
Preparation and performance of new leaching-resistant copper sulfide-based wood preservatives	4
Effect of tracheid on water absorption behavior of Cunninghamia lanceolata under freeze-thaw conditions	4
Changes in chemical properties and microstructure of Pinus taeda and Eucalyptus bosistoana woods modified by contact charring	4
Improving the strength and toughness performance of urea-formaldehyde adhesive using a biomimetic strategy	4
Fine dust after sanding untreated and thermally modified spruce, oak, and meranti wood	4
Oriental beech (Fagus orientalis L.) steaming condensate: phenolic composition and functional activities	4
Enhancing physical-mechanical properties and flame retardancy of fir with lignin-based aqueous modifier	3
The utilization of an olfactory machine in wood identification demonstrates a promising prospect: discerning disparities in emission profiles of volatile organic compounds between Picea abies and Pinu	3
Compressive behavior of wood contact with mortar and epoxy resin adhesives	3
Exploring tannin and caffeine for enhanced performance of oriented strand boards under varied conditions	3
High-voltage electric field-induced decreased absorption efficiency of phenol formaldehyde adhesive in different sections of Chinese fir wood	3
Effects of bolt diameter and load direction on dowel-bearing behaviour of laminated bamboo	3
The potential of the fungus Phellinus linteus (Berk. & M.A. Curt.) in wood biopulping of Eucalyptus sp. and Pinus sp.	3
Potentialities of cellulose nanofibers (CNFs) in low density polyethylene (LDPE) composites	3
Modification of plywood with phenol–formaldehyde resin: substitution of phenol by pyrolysis cleavage products of softwood kraft lignin	3
Shear properties of composite cross-laminated bamboo panels	3
The impact of temperature variations on the thermal and charring characteristics of laminated bamboo lumber	3
Optimal design and application of a MTMD system for a glulam footbridge under human-induced excitation	3
Effects of power and speed parameters on the morphological properties of MDF boards in the laser cutting process	3
Industrial assays to evaluate the efficacy of vacuum pressure impregnation with commercial wood preservatives to eliminate the pinewood nematode, Bursaphelenchus xylophilus, and other nematodes from P	3
Fungal decay resistance, formaldehyde emission and weathering resistance of plywood modified with phenol-formaldehyde resin with partial substitution of phenol by pyrolysis cleavage products of softwo	3
Aging effects on the viscoelastic behaviour of products by fused deposition modelling (FDM) made from recycled and wood-filled polymer resins	3
A comparison of three wood species (poplar, birch and oak) for crash application	3
The use of enzymatic pre-treatment to facilitate and reduce the energy consumption of unbleached cellulose micro/nanofibrils production from Eucalyptus spp. and Pinus spp. kraft pulps	3
Inhibition and densification by inorganic particles in organic–inorganic hybrid fiberboards to enhance mechanical and flame retardancy performance	3
Exploring the potential of multispectral imaging for wood species discrimination	3
Preparation of a strong, mildew resistant, flame-retardant, and smoke suppressing bamboo scrimber through a sustainable method	3
Effect of synergistic flame retardancy on the flame retardant and smoke suppression properties of bamboo fiber composites	3
Resistance drilling: the effect of needle wear	3
Mechanical properties of ply-lam cross-laminated timbers fabricated with lumber and plywood	3
Investigations for increasing the 3D-forming potential of high-density fiberboards	3
A 4-year assessment of the qualitative characteristics of Slovenian barbecue lump charcoal and its compliance with the EN 1860-2 standard	3