OOIR: Observatory of International Research

Papers

(The median citation count of Forest Products Journal is 0. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-05-01 to 2026-05-01.)

Article	Citations
Nanocellulose-Phenol Formaldehyde Adhesive System for Engineered Wood Products: Review	22
Interactive Evolutionary Design of Handbag Integrating Bamboo Weaving Material	9
Analysis of the Trade Network of Global Wood Forest Products and its Evolution from 1995 to 2020	5
Analysis of Resource Depletion and Sustainability in Timber-Producing Larch Forests in Korea Under Various Log Demand Scenarios	5
Removing Friction and Bark Improves Drill Resistance Data for Selection on Wood Density in Pinus taeda Plantations	5
Ionic Liquid-Mediated Plasticization of Bamboo Cellulose Paper	5
Hardwood Sawing Costs: Log Size Differences and Sawing Strategies	4
From Refuse to Reuse: How Much do Consumers Know about the Reclaimed Lumber Industry?	4
Life-Cycle Assessment of Bicycles Based on Bamboo Bending Technology	4
High-Performance Formaldehyde-Free Lignin Adhesives from Sugarcane Bagasse via Epoxy Cross-Linking	4
Acoustic Velocity of Rail Ties with Free and Fixed Boundary Conditions	4
Properties of African Mahogany Wood Commercially Available in the United States	3
Consumer Perceptions toward the Use of Reclaimed Wood in Secondary Wood Products	3
Sustainable Energy from Biomass Waste: Evaluating the Feasibility of Sawdust, Sewage Sludge, and Water Hyacinth in Mixed-Pellet Production	3
Cross-Laminated Timber Panels Produced from Low-Grade Yellow-Poplar Sorted by Structural Visual Grade	3
Effects of Postmanufacture Conditioning on the Mechanical and Hygroscopic Properties of Extrusion Printed Wood–Sodium Silicate Composites	2
Comparison of Bamboo Scrimber and Red Oak as Core Material for Three-Ply Mats	2
Bonding Performance of Preservative-Treated Cross-Laminated Timber (CLT) Posttreated with CU-Based Preservatives	2
Effect of a Water Repellent on Moisture Intrusion Patterns in Small-Scale Mass Ply Panel Floors	2
Advanced Wood Damage Detection and Monitoring Using Instantaneous Frequency Analysis of Acoustic Emission Signals	2
Comparative Effect of Biofillers in pMDI Resin Performance	2
Chinese Consumers’ Attitudes Toward Certified Wood Products	2
Liquid Chromatography-Ultraviolet-Mass Spectrometry Analyses of Hydroethanolic Extracts of Three Wood Species and Their Antioxidant and Antifungal Activities	2
Shear and Bending Properties of Homogeneous and Hybrid CLT Panels Fabricated from Low-Value North American Hardwood Species	2
Effect of Biodeterioration on Modeling Parameters of Code-Compliant Cross-Laminated Timber Lateral Connections	2

Anatomical Predictors of Density and Hardness in Underutilized Amazonian Woods: A Basis for Substituting Commercial Timbers	2
A Comparative Floor Assembly Design and Life-Cycle Assessment Study of Steel–Timber and Steel–Concrete Composite Structural Systems	2
Effect of Adhesives on Bonding Performance of Softwood and Hardwood Plywood	2
Mississippi Log Trucking Liability Insurance Premiums: A Hedonic Analysis	2
Nondestructive Evaluation of Lignin-Foam Blocks Using Acoustic Velocity Method	1
Effect of Wood Specimen Length on Uniaxial Stress–Strain Curve along the Grain Direction	1
Study on the Effect of Wood Moisture Content on Wood Surface Adhesion	1
Prediction of Acoustic Velocity Properties of Downed Pine Trees Using Near-Infrared Spectroscopy	1
Influence of Local Density on Concentrated Static Load Performance of Oriented Strandboard	1
Effect of Notching on Three-Ply Southern Pine Cross-Laminated Timber Panel Stiffness and Strength	1
Lumber Supply-Chain Practice in Cross-Laminated Timber Industries in the United States: A Comparison with Austrian Producers	1
The Stimulation of the Anticancer Chemical Taxol in Taxus baccata	1
Whole-Building Life-Cycle Assessment in the Built Environment: A Ten- and Six-Story Shake-Table Test Building Case Study	1
Economic Importance of Logging Industry and Implications of Capacity Decline in the Lake States Region	1
Recent Full-Scale Mechanical and Creep Testing of Structural Insulated Panels (SIPs): A Summary	1
Analysis of Future Prospects and Opportunities for Wood Adhesives: A Review*	1
Splitting Parameter Optimization for Flattened Bamboo Green Slice Processing	1
A Specialized Data Crawler for Urban Wood Information	1
Government Leadership and Market Participation: A Collaborative Development Model for the Cultural Ecosystem Services of Nature Reserves	1
Oak Wilt Fungus (Bretziella fagacearum) Survival in Logs Following Fumigation with Ethanedinitrile	1
Study on the Temperature Distribution and Natural Frequency of a Circular Saw Blade during Three Types of Wood Sawing Processes	1
Impact of Growth Characteristics on Properties of 2 by 8 Southern Yellow Pine Structural Lumber	1
Determinants of Consumer Preferences for Imported and Domestic Wooden Furniture: Lessons from Addis Ababa, Ethiopia	1
Wood Extractives: Main Families, Functional Properties, Fields of Application and Interest of Wood Waste	1
Integrity of Melamine Formaldehyde Bonds in Ponderosa Pine Cross-Laminated Timber: Isolating Adhesive Compatibility Effect	1
Lumber Kiln Technology and Training Needs in the Northeastern United States	1
Operational Characteristics and Business Perspectives of Wood Pellet Producers and Feedstock Suppliers in the Southeastern US	1
Application of a Digital Twin Model in the Packaging Process of the Panel Furniture Industry	1
Impact of Market Price Fluctuations on the Break-Even Log in Hardwood Sawmills	1
Machine Vision for Knot Detection and Location in Chinese Fir Lumber	1
Experimental Study on Compression Moulding of Carya cathayensis Husks at Room Temperature	1
Research on the Relationship between Bamboo-Based Product Design Attributes and Consumer Satisfaction	1
Wood Technological Properties of the Tree of Heaven (Ailanthus altissima (Mill.) Swingle) and Studies on Possible Applications	1
Fraud and Misrepresentation in the Lump Charcoal Market in the United States: A Closer Look Inside the Bag	0
Evaluation of the Mechanical and Physical Properties of Plywood Adhesively Bonded with Cellulose Nanofiber	0
The Effect of Global Value Chain Participation on Carbon Embodied in Forest Product Exports: A Quasi-Natural Experiment from the Financial Crisis Shock	0
Effects of Cascade Use of Wood and Recycling of Construction Materials on Fossil Greenhouse Gas Emissions of Concrete and Wood-Based Buildings	0
Effect of Sawing Variation on Hardwood Lumber Recovery—Part II: Board Count	0
Unlocking the Biopesticide Potential of Parthenium argentatum Resin: A Quantitative Review of Active Compounds and Future Directions	0
A Comparative Analysis Between Timber Industry and Nontimber Forest Products Industry in Relation to Sustainability and Operators' Proactiveness	0
A Review of Cradle-to-Gate Greenhouse Gas Emission Factors for Canada’s Harvested Wood Products	0
Influence of Material and Decoration on Design Style, Aesthetic Performance, and Visual Attention in Chinese-Style Chairs	0
Effect of Thermal History on Mechanical Relaxations of Dry Wood Determined in Tensile Mode at Temperatures from −136°C to 120°C	0
Comparing Wood Chip Quality from Different Sources across the Southeastern United States	0
State Forestry Cost Share Programs’ Contributions to Loblolly Pine Plantation Cash Flows in the US South	0
Nondestructive Evaluation of Lumber and Cross-Laminated Timber from Pine Trees Felled for up to One Year	0
Flexural Properties of Three-Ply Bolt-Laminated Pine Mats	0
An Examination of Excess Wood Pellet Supply in the United States	0
The Influence of Foam Density on the Flexural Properties of Structural Insulated Panels	0
Cross-Laminated Timber Panels Produced by Low-Grade Yellow-Poplar Sorted by Nondestructive Evaluation	0

Approach to Validate ISPM-15 Compliance for Commercial Treatment Certification of Dielectric Standard Heating of Bulk Solid Wood Packing Materials using Radio Frequency	0
Mechanical Properties of Underutilized Hardwood Species and Potential for Use in Fabrication of Cross-Laminated Timber Industrial Mats	0
Producing Hardwood Cross-Laminated Timber (HCLT) Mats from Low-Grade Red Oak Lumber	0
Tracking the Economic Contributions West Virginia’s Forest Products Industry During the COVID-19 Pandemic Era: A Look at 2019 Through 2022 Data	0
Identifying Optimal Locations for Hardwood CLT Plants in Tennessee: Application of a Spatially Explicit Framework	0
Wavelet Analysis and Forecasting using Open-Access Lumber Market Indices for Assessing the Impact of Hurricanes on Southern US Stumpage Prices	0
Identifying the Optimal Season to Harvest Firewood in Interior Alaska to Significantly Reduce Drying Time	0
Timber Procurement Practices and Mill-Logger Relationships in the US South	0
Influence of Laminate Twist and Clamping Pressure on Bonding Performance of Low-Grade Lumber in Cross-Laminated Timber	0
Destructive and Nondestructive E-Rating of Red Maple Veneers	0
Theory and Method for Rapid Carbon Footprint Accounting of Solid Wood Furniture	0
Propensity of Sawmills to Produce Structural Sawn Wood in Chile	0
Projected Mass Timber Use in Residential and Nonresidential Construction: A Twelve-Country Analysis	0
On-Site Energy Consumption and Life-Cycle Environmental Impacts of Sawmills in California	0
Resistance of Plantation Hinoki to Fungal Attack	0
Nondestructive Evaluation of 2 by 10 Southern Pine Lumber	0
Physical and Mechanical Properties of Hardwoods Cross-Laminated Timber	0
Effects and Mechanisms of Digital Transformation on Enhancing Value Chain Resilience in Forest Products Enterprises: A Dual Perspective of China and Global Markets	0
Validating LORCAT, the Log Recovery Analysis Tool	0
Trend, Structure, and Competitiveness of Global Wooden Furniture Trade	0
Key Drivers of Ecosystem Cultural Service Value: Insights from Zhalong Nature Reserve	0
Nondestructive and Destructive Testing of Wood Railroad Ties	0
Use and Future Development of Optical Measurement Technology in the Study of Wood Surface Roughness CiteSpace-Based Scientometric Analysis (2003 through 2022)	0
Green Packaging Material Preferences among Young Chinese Consumers: A Comparative Study of Recycled versus Virgin Papers and Bio-based versus Synthetic Materials	0
Examination of Industry 4.0 Awareness, Perceptions, and Actions of Employees in Furniture and Board Businesses	0
Preliminary Evaluation of Bending Properties in Dimension Lumber of Paulownia tomentosa as a Fast-Growing Tree Species in Japan	0
Coal Tar Distillate (Creosote)—The First and Still Great Choice to Preserve Utility Poles	0
Financial Analysis of Innovative Wood Products and Carbon Finance to Support Forest Restoration in California	0
Effects of Modification Treatments on the Bending Properties of Tectona grandis and Hevea brasiliensis Wood	0
Transforming Wood into a High-Performance Engineering Material via Cellulose Nanocrystal Impregnation	0
Substitution Estimates for Wood Products in the United States, 1990 to 2020	0
Changes in Cedar (Cedrus libani) Wood Properties in a Hot and Humid Environment	0
WhatWood? Ghana Edition: Enhancing a Wood Identification Field Manual with Smartphone Functionality	0
Carbon Dioxide Emission Evaluations in the Chinese Furniture Manufacturing Industry Using the IPCC Tier-2 Methodology	0
Physical Properties of Pulp and Paper: A Comparison of Forming Procedures	0
Effect of Decoration Complexity and Age on Aesthetic Evaluation, Purchase Intention, and Visual Attention in Wood Furniture	0
Tourists’ Pro-Environmental Behavior in Forest-Based Tourism through Multi-Methods Analysis	0
Innovation Subjects Impacting Business Model Changes in Chinese Wooden Furniture Manufacturers: An Empirical Study	0
Sustainable Development and International Framework: Overview and Analysis in Forests and Forest Products Strategies	0
Comparative Assessment of Consumer Attitudes to Timber as a Construction Material in China and Japan	0
Determining the Extent of damage in Snapped Southern Yellow Pine Trees with Acoustic Testing	0
Investigation of the Role of Shear Deflection in the Flexural Performance of Structural Insulated Panels	0
Assessing 2 by 6 Southern Pine Lumber Flexural and Tensile Properties with Nondestructive Techniques	0
Effect of Sawing Variation on Hardwood Lumber Recovery—Part I: Volume	0
A Machine Learning Approach to Predict Properties of Wood Products during Milling	0
Research on the Design System of Bamboo-Woven Products Based on Traditional Bamboo-Weaving Craft VR Experience	0
Machine Learning-Based Early Warning Indicator for Sawn Timber Price: A Comparative Model Analysis with a Case Study of Korea	0
Nondestructive Assessment of Hardwood Cross-Laminated Timber	0
An Evaluation of Low-Grade Red Oak and Soft Maple as Raw Material for Cross-Laminated Timber Panel Production	0
Spectroscopic Characterization of the Chemical Changes Occurring in Soy Wood Composite Adhesives When Exposed to Moisture	0
Resistance of Plantation Grown Sugi (Cryptomeria japonica) to Fungal Degradation	0
Assessing Income and Risk of Incorporating Pine Straw Production into Slash Pine Plantations	0
Soy-Flour Adhesive Bonding of Low-Moisture Hickory and Red Oak Veneer	0
Design and Evaluation of a Shear Analogy Tool for Custom Cross-Laminated Timber (CLT) Panels Made from Various Wood Species	0
Investigating the Resistance Expression Method of Wood Resistance Drill Instruments	0
Application of Soy Flour Modified Resins to Hot and Cold Pressed Veneer*	0
Regional Drivers of Primary Wood Processing Mills in the Western Southeast US	0
Research on the Effect of Heat Tensioning on the Dynamic Stability of Circular Saw Blades with External Scrapers	0
Soy Flour-Modified pMDI Resin Improves Wood Panel Properties by Suppressing Steam Generation	0
The Impact of China's Participation in the Value Chains of its Trading Partners on the Carbon Embodied in the Bilateral Trade of Forest Products	0
Borate Treatment of CLT Panels Using Vacuum: A Proof of Concept	0
Durability Performance of Boron/Copper Naphthenate Dual-Treated Queensland Maple (Flindersia brayleyana)	0
Fighting Alone or Mutual Benefit and Win? A Study on Forestry Embodied Energy Competition Network Based on MRIO	0
Influence of Critical Synthesis Parameters and Precursor Stabilization on the Development of Adhesive Strength in Fructose–HMF–Amine Adhesives*	0
On Statistical Testing Methods for Dimension Lumber Property Monitoring	0
Identification of Tree Species and Extent of Material Deterioration of Wood Components in the Yangjia Courtyard Ancient Building	0
Market Power of China’s Chemical Wood Pulp Imports Based on the Pricing-to-Market Model	0
Effect of Incising on Flexural Properties of Nominal 4 by 6-Inch Douglas-Fir	0
Supporting Manufacturing Process Changes with an Innovative Microscopy Method	0
Wood Vinegars: Production Processes, Properties, and Valorization	0
Fire Severity Alters Elemental Concentrations in Wood and Bark Tissues of Conifer and Broadleaf Trees	0
Toughness of Loblolly Pine (Pinus taeda) Salvaged after 0 to 6 Months on the Ground	0
Mechanism for Achieving Balance between Ecological Conservation and Community Forest Products Benefits: A Case Study of a Typical National Park in China	0
Modeling Internet Search Behavior of Cross-Laminated Timber	0