Electrochimica Acta

Article	Citations
Unlocking efficiency in oxygen reduction reaction: Synergistic edge dopants of nitrogen and boron in carbon nano onions	184
2D N-doped layered mesoporous carbon sheets for high-performance electrochemical hydrogen storage	176
Editorial Board	129
Future SI	126
Future SI	121
Future SI	111
Recent SI	101
Future SI	100
Recent SI	100
Water photo-oxidation on self-assembled organic/Co3O4 metal junctions in biphasic systems	99
Outflow geometry for electrochemical desalination cells	91
Editorial Board	88
ISE pages	86
ISE pages	86
An extension of the theory of chronoamperometry for the catalytic <	85
ISE pages	84
Catalysts for hydrogen evolution in universal-pH medium: Construction and structural optimization of Ni3S2/Co9S8/WS2 interface synergies	83
Effect of the Pt surface shell in PtNi alloy catalysts on ammonia electrooxidation	79
A comparative study of the formation, and ion and solvent transport of polyaniline in protic liquid-based deep eutectic solvents and aqueous solutions using EQCM	79
Electronic agglomeration effect of Co−O sites in ultrafine cobalt oxide coupled CNT accelerating ORR kinetic activity for hybrid sodium−air battery	79
Exploring structural and dynamical properties of polymer-ionic liquid ternary electrolytes for sodium ion batteries	78
Ferrocenyl aniline modified electrode for the electrochemical synthesis of 2-(4-methoxyphenyl)-1H-benzo[d]imidazole	77
Investigation of the corrosion behavior influence of carbon interlayer on aluminum collector in lithium-sulfur battery system	77
Separator impregnated with polyvinyl alcohol to simultaneously improve electrochemical performances and compression resistance	76
Corrigendum to “Effect of Surfactants on 1,2-Dichloroethane-in-Water Droplet Impacts at Electrified Liquid-Liquid Interface” [Electrochimica Acta, Volume 500, 2024, 144753]	75

Efficient and highly accurate calculation of chronoamperometric currents for the	75
Oxygen reduction mediated by tetrapyridylalkylamine Cu(II) complexes with diimines	75
Polymer electrolytes comprising oligomeric lithium borate salts and poly(ethylene oxide)	74
Oxidizing methanol at cubic-hexagonal junction of NiO-ZnO at low onset potential	74
Hierarchical 2D/2D interface of nickel aluminum oxide and nickel aluminum layered double hydroxide nanoflowers: An efficient and robust electrocatalyt for overall water splitting	74
Stable interface between anode materials and Li1.3Al0.3Ti1.7(PO4)3-based solid-state electrolyte facilitated by graphene coating	71
Two-dimensional parametric investigation of zinc-air fuel cell with flowing electrolyte by numerical method	71
Unveiling the transport properties of protic ionic liquids: Lithium ion dynamics modulated by the anion fluorine reservoir	71
In situ grown Co9S8 nanocrystals in sulfur-doped carbon matrix for electrocatalytic oxidation of hydrazine	70
Failure mechanisms investigation of ultra-thin composite polymer electrolyte-based solid-state lithium metal batteries	70
Multichromic metallopolymers of poly(2,5-dithienylpyrrole)s derived through tethering of ruthenium(II) bipiridyl complex	70
Glucose electrooxidation on carbon supported NiAu electrocatalysts	69
In-system synthesize Fe nanodots-doped Ni hydroxide nanoflakes on Ni foam for efficient oxygen evolution catalysis	68
Performance, electrochemical process analysis and degradation of gadolinium doped ceria as fuel electrode material for solid oxide electrolysis cells	68
A Schiff based p-phenylenediimine polymer as high capacity anode materials for stable lithium ion batteries	67
Hybrid 1D titanium oxide nanowire – Reduced graphene oxide nanocomposites as efficient catalyst support for PEMFC	67
Quantum rate electrodynamics and resonant junction electronics of heterocyclic molecules	65
Sensing nitrite by iron-nitrogen-carbon oxygen reduction electrocatalyst	64
Water intercalation strategy to fabricate low-potential and dense grapheme film anode for high energy density K-ion batteries	63
A thermostable ionic liquid electrolyte for wide-temperature window supercapacitor	63
Integrating zirconia-gold hybrid into aptasensor capable of ultrasensitive and robust carcinoembryonic antigen determination	63
Anisotropic ionic transport properties in solid PEO based electrolytes	63
Thermodynamic study of superoxide dismutase adsorption processes over cysteine-gold electrode	62
Mechanism research of SDBS-functionalized polypyrrole to improve electrochemical performance of screen-printed graphene electrode	62
Superior dual-ion batteries enabled by mildly expanded graphite cathode and hierarchical MoS2@C anode	62
FeZrRu Trimetallic bifunctional oxygen electrocatalysts for rechargeable Zn-air batteries	62
Electrochemical systems equipped with 2D and 3D microwave-made anodes for the highly efficient degradation of antibiotics in urine	61
Destructive effects of transitional metal ions on interfacial film of carbon anode for lithium-ion batteries	61
A ternary cross-linked gel electrolyte with high mechanical strength and ionic conductivity for ultra-long-life reversible zinc deposition	61
One‐dimensional NiS‐CNT@Li7P3S11 nanocomposites as ionic/electronic additives for LiCoO2 based all‐solid‐state lithium batteries	60
Electrodeposition of Dysprosium in pyrrolidinium triflate ionic liquid at ambient temperature: Unraveling system efficiency and impact of solvation interplays on the reduction process	59
Localized formation of highly surface-active gold nanoparticle on intrinsic Nickel containing carbon black and its scanning electrochemical microscopy interrogation and electrocatalytic oxidation of h	59
Methods for automating and improving the robustness of linear Kramers–Kronig tests for the purposes of validating immittance spectra	59
Mercury(II) stripping electroanalysis with hot microelectrodes	59
Directing the uniform and dense Li deposition via graphene-enhanced separators for high-stability Li metal batteries	58
ISE pages	58
Degradation study for 18650 NMC batteries at low temperature	58
Investigations of the relationships between structure and electrochemical properties of fullerenol nanoaggregates	58
Co-Co LDH-derived CoSe2 anchored on N-doped carbon nanospheres as high-performance anodes for sodium-ion batteries	57
Energy-saving recovery of lead from waste lead paste via in-situ hydrometallurgical reduction and electrochemical mechanism	57
A green synthesis approach using deep eutectic solvents to synthesize the MIP-AuAg/rGO as an electrochemical sensor for acetaminophen: Experimental and theoretical studies	57
Electrical double layer formation on glassy carbon in aqueous solution	56
The role of cation exchange membrane characteristics in CO2 electrolysis to CO using acid anolyte	56
Future SI	56
Aqueous solution-based synthesis approach for carbon-disordered rocksalt composite cathode development and its limitations	56
Effect of innovative carbon additives in the positive active mass of absorbent glass mat lead acid battery	55
Nanotubes-nanosheets (1D/2D) heterostructured bifunctional electrocatalysts for overall water splitting	55
An electrochemical aptasensor based on MOF-derived bimetallic carbon nanocomposites Au@Cu-C for ultrasensitive detection of homocysteine on portable potentiostat	55
Signal amplification platform based on 2D MOF-on-MOF architectures-derived Co-decorated carbon@nitrogen-doped porous carbon for enhanced electrochemical acetaminophen sensing	54
Hollow porous Co-N dual-doped oxygen reduction reaction catalyst prepared using spherical nanosheet structure template	54

Application of botryosphaeran as a carbon black adherent on a glassy carbon electrode for the electrochemical determination of cyclobenzaprine	54
Highly selective and efficient electrochemical nitrate removal via Ni-doped Cu(OH)2 nanowires promoting H* reaction	54
Investigation of operating conditions for 200 kW fuel cell system based on electrochemical impedance spectroscopy	54
A novel photoelectrochemical based water splitting and uric acid biosensing using PLD grown In2Se3 thin films	53
Steam electrolysis in solid oxide electrolytic cells using a cermet of copper and gadolinia doped ceria cathode	53
Interface modification in solid-state lithium batteries based on garnet-type electrolytes with high ionic conductivity	53
A novel hierarchically-porous diamondized polyacrylonitrile sponge-like electrodes for acetaminophen electrochemical detection	53
Effects of heat treatment temperature on the morphology, composition, and electrocatalytic properties of electrodeposited NiB thin films towards OER	53
Investigation of the inner microstructure of composite materials during their densification by scanning electron microscopy – LSM:YSZ electrode case study	53
A Ti3C2T -encapsulated Mn2+-doped Co(OH)2 nanosheets electrode grown on carbon cloth for low-temperature flexible supercapacitors	53
Water electrolysis using fluorine-free, reinforced sulfo-phenylated polyphenylene membranes	52
Monodisperse core-shell Li4Ti5O12@C submicron particles as high-rate anode materials for lithium-ion batteries	52
Microstructure and corrosion properties of AlCrFe2Ni2B (x = 0, 0.04, 0.1, 0.2) high entropy alloy	52
Tuning the potential drop at graphene/protic ionic liquid interface by molecular structure engineering	52
Highly active CeO2-x/Fe interfaces enable fast redox conversion of polysulfides for high-performance lithium-sulfur batteries	52
(Sn, Ti)O2 solid solution: Mechanically reinforced SnO2@TiO2@C anode for cycle stability of lithium-ion batteries	52
Bio-based quaternary ammonium salt as an electrolyte for dye-sensitised solar cells	51
Three-dimensional hollow nitrogen-doped carbon shells enclosed monodisperse CoP nanoparticles for long cycle-life sodium storage	51
Energy on-the-go: V2O5-pBOA-Graphene nanocomposite for wearable supercapacitor applications	50
Fabrication of 3D MXene@graphene hydrogel with high ion accessibility via Al-induced self-assembly and reduction for high-performance supercapacitors	50
Vacancy diffusion and its consequences for void growth at the interface of a stripping metal electrode and solid electrolyte	50
Metal-organic framework derived carbon-coated spherical bimetallic nickel-cobalt sulfide nanoparticles for hybrid supercapacitors	50
Electrochromic properties of undoped and Ti-doped MoO3 converted from vertical nanowall MoS2 thin films	50
Engineering the active sites by tuning the Ni and Mn composition in hierarchical heterostructured composites for electrocatalytic water splitting	50
Morphology engineering of iridium electrodes via modifying titanium substrates with controllable pillar structures for highly efficient oxygen evolution reaction	50
Surface engineering with ammonium niobium oxalate: A multifunctional strategy to enhance electrochemical performance and thermal stability of Ni-rich cathode materials at 4.5V cutoff potential	50
A facile assembly of SnO2 nanoparticles and moderately exfoliated graphite for advanced lithium-ion battery anode	50
Anodic electrocatalytic behavior of graphite supported TiO2 towards the generation of hydroxyl radicals	49
Cross-linked Si@SiC nanowires prepared by vacuum DC arc method embedded in phenolic resin as high electrochemical performance anode active materials for lithium-ion batteries	49
Polydopamine coated Si nanoparticles allow for improved mechanical and electrochemical stability	49
Amplification-free, highly sensitive electrochemical DNA-based sensor for simultaneous detection of stx1 and stx2 genes of Shiga toxin-producing E. coli (STEC)	49
Influence of the preparation conditions on the microstructure of electrodeposited nanocrystalline Ni–Mo alloys	49
Oxygen electroreduction on small (<10 nm) and {100}-oriented Pt nanoparticles	49
Lithium fluoride additive helps construct stable electrode-electrolyte interfaces to boost the performance of Mg-S batteries	49
An integrated separator/anode assembly based on electrospinning technique for advanced lithium-ion batteries	49
A benzo[a]phenazine-based redox species with highly reversible two-electron reaction for aqueous organic redox flow batteries	49
Enhancing photovoltaic performance of dye-sensitized solar cells through TiO2/g-C3N4 nanocomposite photoanodes for improved charge carrier management	49
Functional group combination synergistically regulates the selectivity of 2/4e-ORR in carbon catalysts	48
A battery-type cathode with RuO2 modified Ni11(HPO3)8(OH)6 for asymmetric supercapacitors	48
An additive-free silicon anode in nanotube morphology as a model lithium ion battery material	48
In-situ growing low-crystalline Co9S8Ni3S2 nanohybrid on carbon cloth as a highly active and ultrastable electrode for the oxygen evolution reaction	48
Contrasting the mechanisms of high corrosion resistance in ultra-high purity Mg-Sr alloys in Hanks' and NaCl solutions	48
Effect of passivation and surface treatment of a laser powder bed fusion biomedical titanium alloy on corrosion resistance and protein adsorption	48
Lead-modified graphite felt electrode with improved V	47
Effect of electrogenerated random defects on Pt(111) surface over methanol electrooxidation: Electrochemical and spectroscopic studies	47
Influence of the catalyst layer thickness on the determination of the OER activity of Fe3O4@CoFe2O4 core-shell nanoparticles	47
Synthesis of porous CuCo2O4 nanorods/reduced graphene oxide composites via a facile microwave hydrothermal method for high-performance hybrid supercapacitor applications	47
Electrochemical and leaching studies to better understand the role of ethylene glycol in the oxidative acid dissolution of chalcopyrite	47
Stabilization the interface of NASICON-type solid electrolyte and Li metal by Al interlayer	47
Porous crosslinked Co3O4 nanoflakes synthesized at different pH media for electrochemically charge storage applications	47
Ultrafast self-assembly Fe2O3 nanoparticles confined in carbon layers toward robust heterogeneous electro-Fenton reaction	47
Mixture deposition method for graphene quantum dots-based dye-sensitized solar cell	47
The effect of membrane electrode assembly methods on the performance in fuel cells	46
Removal of antibiotic rifampicin from aqueous media by advanced electrochemical oxidation: Role of electrode materials, electrolytes and real water matrices	46
Recent advances in covalent organic frameworks for capacitive deionization: A review	46
A full metal-free battery operating under cold condition enabled by an antisolvent	46
Introducing hydrophilic cellulose nanofiber as a bio-separator for “water-in-salt” based energy storage devices	46
Investigating the effect of nitrogen and chlorine Co–doped carbon quantum dots in phenazine and quinoxaline sensitized solar cells	46
Mechanisms of multielectron reactions at the plasma/water interface: Interfacial catalysis, RONS, nitrogen fixation, and plasma activated water	46
High performance of electrosprayed graphene oxide/TiO2/Ce-TiO2 photoanodes for photoelectrocatalytic inactivation of S. aureus	46
A General Equivalent Electrical Circuit Model for the characterization of MXene/graphene oxide hybrid-fiber supercapacitors by electrochemical impedance spectroscopy – Impact of fiber length	46
An electrochemical oscillatory flow reactor with pillar array electrodes improving mass transfer in electrosynthesis	46
Kinetic and thermodynamic analysis of Cu2+-dependent reductive inactivation in direct electron transfer-type bioelectrocatalysis by copper efflux oxidase	46
Na3MnTi(PO4)3/C composite as an anode for Na-ion batteries with superior rate performance and long-term span	45
Photo- and electro-oxidation of tetracycline hydrochloride on self-doped titanium dioxide nanotubes modified by Pt sub-monolayers	45
Inspired electrocatalytic performance by unique amorphous PdCu nanoparticles on black phosphorus	45
Architecture design of yolk-shell heterostructured bimetallic selenide confined in polydopamine for high efficiency sodium/potassium ion storage	45
CO2 electro-reduction on Cu3P: Role of Cu(I) oxidation state and surface facet structure in C1-formate production and H2 selectivity	45
Unveiling dynamics evolution mechanism of electrochromic process in WO3-x film with thickness dependence	45
Iron-cobalt-nickel-copper-zinc (FeCoNiCuZn) high entropy alloy as positive electrode for high specific capacitance supercapacitor	45
One-step microwave-assisted synthesis of metal-free heteroatom-doped carbon catalyst for H2O2 electrosynthesis	45
Bi-functional electrochromic supercapacitor based on hydrothermal-grown 3D Nb2O5 nanospheres	45
High stability supercapacitors based on MXene/Spherical g-PPy composite electrodes	45
Soft-template assisted morphology tuning of NiMoO4 for hybrid supercapacitors	45
Spinel-structured CuCo2O4 with a mixed 1D/2D morphology for asymmetric supercapacitor and oxygen evolution electrocatalyst applications	45
Interlayer doping of pseudocapacitive hydrated vanadium oxide via Mn2+ for high-performance aqueous zinc-ion battery	44
Facile fabrication of copper-based metal-organic-framework/graphene hybrid supported on highly stretchable wooden substrate for in-plane micro-supercapacitor with potential applications as wearable de	44
Compositional dependence of electrochemical properties in biopolymer blend-based solid electrolytes doped with sodium perchlorate for EDLC applications	44
Nickel hydroxide nanosphere decorated reduced-TiO2 nanotubes as supercapacitor electrodes	44
Dual redox groups enable organic cathode material with a high capacity for aqueous zinc-organic batteries	44

Exploration of aqueous electrolyte on the interconnected petal-like structure of Co-MOFs for high-performance paper-soaked supercapacitors	44
Exploration of high performance and highly flexible supercapacitor configuration with MXene/1T-MoS2 composite paper electrode	44
Perforated Co3O4 nanosheets as high-performing supercapacitor material	44
Quaternary ammonium-based levelers for high-speed microvia filling via Cu electrodeposition	44
EIS equivalent circuit model prediction using interpretable machine learning and parameter identification using global optimization algorithms	44
A review of recent modification strategies of TiO2-based photoanodes for efficient photoelectrochemical water splitting performance	44
NaTi2(PO4)3 modified O3-type NaNi1/3Fe1/3Mn1/3O2 as high rate and air stable cathode for sodium-ion batteries	44
Corrosion behavior of AlCoCrFeNix high entropy alloys	44
Development of high copper concentration, low operating temperature, and environmentally friendly electroless copper plating using a copper ‐ glycerin complex solution	43
Dual-path glucose electrooxidation reaction on Ni(OH)2/NiOOH catalysts in alkaline media	43
W-induced morphological modification of NiFe layered double hydroxides as efficient electrocatalysts for overall water splitting	43
Ba-doped LaCoO3 perovskite as novel bifunctional electrocatalyst for zinc–air batteries	43
CoS2-NC@CNTs hierarchical nanostructures for efficient polysulfide regulation in lithium-sulfur batteries	43
2-aminoanthraquinone anchored on N-doped reduced graphene oxide for symmetric supercapacitor with boosting energy density	43
Study on the estimation of the state of charge of lithium-ion battery	43
CoS2 embedded 3D hollow carbon spheres nanoreactors for high-performance lithium-sulfur batteries	43
In situ self-boosting catalytic synthesizing free-standing N, S rich transition metal sulfide/hierarchical CNF-CNT architectures enable high-performance lithium-sulfur batteries	43
ACGNet: An interpretable attention crystal graph neural network for accurate oxidation potential prediction	43
Exploring the use of oligomeric carbonates as porogens and ion-conductors in phase-separated structural electrolytes for Lithium-ion batteries	43
Enhanced electrochemical performance of CuO/NiO/rGO for oxygen evolution reaction	43
Preparation of macadamia nut shell porous carbon and its electrochemical performance as cathode material for lithium–sulfur batteries	43
High-efficiency water splitting catalyzed by NiMoO4 nanorod arrays decorated with vacancy defect-rich NiTex and MoOy layers	43
New high-entropy transition-metal sulfide nanoparticles for electrochemical oxygen evolution reaction	42
Surface modulation of transition-metal-doped MoS2@graphite felt for bifunctional catalysis in Zn-air batteries	42
Interfacial recharging behavior of mixed Co, Mn-based perovskite oxides	42
Pseudocapacitive vs diffusion controlled charge storage in Fe2O3 nanosheet Na-ion battery	42
Electrocatalytic hydrogen and oxygen evolution reactions: Role of two-dimensional layered materials and their composites	42
Influence of morphological variations in cobalt bismuth oxide on supercapacitor performance	42
Large surface vanadium pentoxide nanosheet modified screen-printed electrode for nanomolar diclofenac determination	42
Facile multi-step tactics to harvest copper-doped O3-type layered NaNi1/3Fe1/3Mn1/3O2 and mitigate capacity decay	42
Facile synthesis of oxygen-deficient MoO3-x nanosheets by light radiation for fast electrochromic supercapacitors	41
Visualization of working electrode reactivity from an electrochromic counter electrode	41
Reversible heat effects of lithium metal- and porous lithium iron phosphate electrodes	41
Graphene intermediated synthesis of thin-packing stacking-free MnO2 nanoflakes for high power output at high mass loading	41
ISE pages	41
Electrosynthesis of nitrate by Pd and TiO2 nanoparticles anchored on 2-methylimidazolium functionalized polypyrrole/graphene oxide	41
Editorial Board	41
Editorial Board	41
Editorial Board	41
Future SI	40
Influence of activating and supporting oxygen in M–N–C electrocatalysts for oxygen reduction	40
Reduction of VO2+ in electrolysis cell combined with chemical regeneration of oxidized VO2+ electrolyte for operando capacity recovery of vanadium redox flow battery	40
Luminol electrochemiluminescence by combining cathodic reduction and anodic oxidation at regenerable cobalt phthalocyanine modified carbon paste electrode for dopamine detection	40
Electrodeposited 3D lithiophilic Ni microvia host for long cycling Li metal anode at high current density	40
Potential monitoring during Ge electrochemical etching: Towards tunable double porosity layers	40
One-step bulk and surface co-modification of LiNi0.8Co0.15Al0.05O2 cathode material towards excellent long-term cyclability	40
Unveiling multi-component hybrid organic-inorganic SEI formation in gel polymer electrolytes: A computational study	40
Entropy stabilization effect and oxygen vacancy in spinel high-entropy oxide promoting sodium ion storage	40
An effective approach to reaching the theoretical capacity of a low-cost and environmentally friendly Na4Fe3(PO4)2(P2O7) cathode for Na-ion batteries	40
Electrochemical properties of two-dimensional hexagonal boron nitride nanosheets prepared by hydrothermal method	40
Enhanced perovskite solar cells with TiO2-Graphene nanocomposite quantum dots in electron transport layer	40
Fe-Co-Ni trimetallic Prussian blue analogs with tunable electrochromic energy storage properties	40
ISE pages	40
Hollow carbon cavities decorated with highly dispersed manganese-nitrogen moieties for efficient metal-air batteries	40
Highly oriented MIL-101(Cr) continuous films grown on carbon cloth as efficient polysulfide barrier for lithium-sulfur batteries	40
Reciprocal irreversibility compensation of LiNi0.2Co0.2Al0.1Mn0.45O2 cathode and silicon oxide anode in new Li-ion battery	40
Insights of potassium hexafluorophosphate additive in solid polymer electrolyte for realizing high performance all-solid-state lithium metal batteries	40
Unveiling the microstructure and promising electrochemical performance of heavily phosphorus-doped diamond electrodes	40
Molybdenum sulfide/Ni:FeOOH heterostructures as efficient water oxidation electrocatalysts in alkaline media	39
Highly sensitive electrochemical sensor for the detection of Shiga toxin-producing E. coli (STEC) using interdigitated micro-electrodes selectively modified with a chitosan-gold nanocomposite	39
Fabrication of hierarchical Ni nanowires@ NiCo-layered double hydroxide nanosheets core-shell hybrid arrays for high-performance hybrid supercapacitors.	39
PolArStat: An Arduino based potentiostat for low-power electrochemical applications	39
Comparative study of the vibrational contributions to electrochemical potential in Na<	39
Facile sulfur chemistry assisted carbon reconfiguration for efficient potassium ion electrochemical storage	39
Potential Co2+ and Ni2+ intercalation into nickel hexacyanoferrate in aqueous media: Study of electrochemical process and multivalent batteries implications	39
Boosting the cycle stability and safety of lithium-sulfur batteries via a bilayer, heat-treated electrospun separator	39
Lattice-strained and ultra stable non-noble metal electrocatalysts for overall water splitting	39
Characterization of Nd-Bi intermetallic compound formations by co-reduction of Nd(III) and Bi(III) in molten LiCl-KCl eutectic	39
Application of Prussian Blue modified carbon electrodes for amperometric detection of amyloid-β peptides by flow injection analysis	39
Molecular insight into sequence-defined polyelectrolytes for energy storage devices	39
Bipolar membrane Electrolyzer for CO2 electro-reduction to CO in organic electrolyte with NaClO produced as byproduct	39
Rational construction of N-containing carbon sheets atomically doped NiP-CoP nanohybrid electrocatalysts for enhanced green hydrogen and oxygen production	39
Electrochemical polymerization, characterization and spectroelectrochemical studies of a N-substituted-2,5-dithienil-pyrrole bearing an aniline moiety for cross-linking (TPTBA)	39
Electrodeposition of crystalline Si in molten alkali metal fluoride–chloride mixtures: Comparative study of Li, Na, K, and Cs systems	39
Electrochemical detection and evaluation of the anomalous chloride extraction from water to 1,2-dichloroethane under the non-equilibrium conditions	39
In situ scanning tunneling microscopy study of 2-mercaptobenzimidazole local inhibition effects on copper corrosion at grain boundary surface terminations	38
Perspective on quantum electrochemistry. A simple method for measuring the electron transfer rate constant	38
ISE pages	38
Dark nanostructured ZnO films formed by anodic oxidation as photoanodes in photoelectrochemical water splitting	38
Morphology dependent electrocatalytic activity of copper based porous organic frameworks via diverse chain length of linkers and counterions of metal precursor	38
Covalent S and Cl grafted porous carbon host realized via the one-step pyrolysis method results in boosted Li–O2 battery performances	38
Nitrogen-doped carbon nanotube-buffered FeSe2 anodes for fast-charging and high-capacity lithium storage	38
Understanding reactivity of self-assembled monolayer-coated electrodes: SAM-induced surface reconstruction	38
Editorial Board	38
Design and synthesis of copper oxide/cobalt-nickel hydroxide core-shell heterostructure material used as cathodes for hybrid supercapacitors	38
Multi-heteroatom doped nanocarbons for high performance double carbon potassium ion capacitor	38
Electrochemical and spectroscopic characterization of AgNP suspension stability influenced by strong inorganic acids	38
Single-electrode electrochemical system based on tris(1,10-phenanthroline)ruthenium modified carbon nanotube/graphene film electrode for visual electrochemiluminescence analysis	38
Tailoring rGO Cu-Cu2O as a three-dimensional catalytic system in boosting of methanol electro-oxidation reaction	38
The enhanced confinement effect of double shell hollow mesoporous spheres assembled with nitrogen-doped copper cobaltate nanoparticles for enhancing lithium–sulfur batteries	38
Carbon tape-assisted electrodeposition and characterization of arrayed micro-/nanostructures	38
A one-pot method to fabricate reduced graphene oxide (rGO)-coated Si@SiOx@β-Bi2O3/Bi composites for lithium-ion batteries	38
Investigating the particle size effect on the electrochemical performance and degradation of cobalt-free lithium-rich layered oxide Li1.2Ni0.2Mn0.6O2	37
Polyaniline/graphene oxide nanocomposite as an innovative cathode for high energy density aqueous zinc-ion batteries	37
Self-assembled Zn-Co MOF nanospheres/rGO as cathode material for an asymmetric supercapacitor with high energy density	37