Journal of the Electrochemical Society

Papers
(The TQCC of Journal of the Electrochemical Society is 6. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-04-01 to 2024-04-01.)
ArticleCitations
Review—Localized High-Concentration Electrolytes for Lithium Batteries259
Review—“Knees” in Lithium-Ion Battery Aging Trajectories130
Review—Recent Advances in Tin Oxide Nanomaterials as Electrochemical/Chemiresistive Sensors129
Review—Recent Progress in Portable Fluorescence Sensors116
Perspective—Combining Physics and Machine Learning to Predict Battery Lifetime109
Editors’ Choice—Review—Impedance Response of Porous Electrodes: Theoretical Framework, Physical Models and Applications108
Editors’ Choice—Quantifying the Impact of Charge Transport Bottlenecks in Composite Cathodes of All-Solid-State Batteries99
Review—Research Progress on Layered Transition Metal Oxide Cathode Materials for Sodium Ion Batteries84
Review—Lithium Plating Detection Methods in Li-Ion Batteries84
Engineered Hierarchical CuO Nanoleaves Based Electrochemical Nonenzymatic Biosensor for Glucose Detection82
Multi-Walled Carbon Nanotubes Decorated with Silver Nanoparticles for Acetone Gas Sensing at Room Temperature75
Optimizing Cycling Conditions for Anode-Free Lithium Metal Cells73
Review—Use of Impedance Spectroscopy for the Estimation of Li-ion Battery State of Charge, State of Health and Internal Temperature66
Communication—Ultra-Small NiO Nanoparticles Grown by Low-Temperature Process for Electrochemical Application64
Review—The Design, Performance and Continuing Development of Electrochemical Reactors for Clean Electrosynthesis63
Facile Synthesis of Co9S8 Nanocages as an Electrochemical Sensor for Luteolin Detection62
Novel Method for Monitoring the Electrochemical Capacitance by In Situ Impedance Spectroscopy as Indicator for Particle Cracking of Nickel-Rich NCMs: Part I. Theory and Validation61
Comparing Different Thermal Runaway Triggers for Two Automotive Lithium-Ion Battery Cell Types58
Evaluation of Diaphragms and Membranes as Separators for Alkaline Water Electrolysis57
Elucidating the Role of Hydroxide Electrolyte on Anion-Exchange-Membrane Water Electrolyzer Performance56
Review—Recent Advances in Microfabrication, Design and Applications of Amperometric Sensors and Biosensors53
The Discrepancy in Oxygen Evolution Reaction Catalyst Lifetime Explained: RDE vs MEA - Dynamicity within the Catalyst Layer Matters53
Effective Upcycling of Graphite Anode: Healing and Doping Enabled Direct Regeneration49
Review—Direct Electrochemical Synthesis of Metal Organic Frameworks49
Monododecyl Phosphate Film on LY12 Aluminum Alloy: pH-Controlled Self-Assembly and Corrosion Resistance48
Effect of the IrOx Conductivity on the Anode Electrode/Porous Transport Layer Interfacial Resistance in PEM Water Electrolyzers47
Perspective—Structure and Stability of the Solid Electrolyte Interphase on Silicon Anodes of Lithium-ion Batteries47
Voltage Hysteresis Model for Silicon Electrodes for Lithium Ion Batteries, Including Multi-Step Phase Transformations, Crystallization and Amorphization45
Review—Surface Coatings for Cathodes in Lithium Ion Batteries: From Crystal Structures to Electrochemical Performance44
Durability Testing of Low-Iridium PEM Water Electrolysis Membrane Electrode Assemblies44
Review—Corrosion-Resistant High-Entropy Alloy Coatings: A Review44
Review—CO2 Separation and Transport via Electrochemical Methods44
Review—Polymer/Ceramic Interface Barriers: The Fundamental Challenge for Advancing Composite Solid Electrolytes for Li-Ion Batteries43
Transition Metal Dissolution and Degradation in NMC811-Graphite Electrochemical Cells43
Review—Metal Organic Framework Based Nanomaterials for Electrochemical Sensing of Toxic Heavy Metal Ions: Progress and Their Prospects41
Towards an Electrochemical Immunosensor for the Detection of Antibodies against SARS-CoV-2 Spike Protein41
Highly Sensitive Voltammetric Sensor for Nanomolar Dopamine Detection Based on Facile Electrochemical Reduction of Graphene Oxide and Ceria Nanocomposite41
Ionomer Optimization for Water Uptake and Swelling in Anion Exchange Membrane Electrolyzer: Oxygen Evolution Electrode41
An Advanced Microstructural and Electrochemical Datasheet on 18650 Li-Ion Batteries with Nickel-Rich NMC811 Cathodes and Graphite-Silicon Anodes40
Review—Semiconductor Materials and Devices for Gas Sensors40
Challenging Practices of Algebraic Battery Life Models through Statistical Validation and Model Identification via Machine-Learning40
Performance and Degradation of LiFePO4/Graphite Cells: The Impact of Water Contamination and an Evaluation of Common Electrolyte Additives40
Communication—Prediction of Thermal Issues for Larger Format 4680 Cylindrical Cells and Their Mitigation with Enhanced Current Collection39
Perspective—Electrolyte Design for Aqueous Batteries: From Ultra-High Concentration to Low Concentration?39
A Highly Efficient Nonenzymatic Hydrogen Peroxide Electrochemical Sensor Using Mesoporous Carbon Doped ZnO Nanocomposite39
A Powerful Transmission Line Model for Analysis of Impedance of Insertion Battery Cells: A Case Study on the NMC-Li System38
A Systematic Study of Electrolyte Additives in Single Crystal and Bimodal LiNi0.8Mn0.1 Co0.1O2/Graphite Pouch Cells38
All-Dry Synthesis of Single Crystal NMC Cathode Materials for Li-Ion Batteries38
A Dilatometric Study of Graphite Electrodes during Cycling with X-ray Computed Tomography38
Electrochemically Stable In Situ Dilatometry of NMC, NCA and Graphite Electrodes for Lithium-Ion Cells Compared to XRD Measurements37
Quantitative Relationships Between Pore Tortuosity, Pore Topology, and Solid Particle Morphology Using a Novel Discrete Particle Size Algorithm37
The Impact of Ink and Spray Variables on Catalyst Layer Properties, Electrolyzer Performance, and Electrolyzer Durability37
Temperature-Swing Synthesis of Large-Size Single-Crystal LiNi0.6Mn0.2Co0.2O2 Cathode Materials37
Li[Ni0.5Mn0.3Co0.2]O2 as a Superior Alternative to LiFePO4 for Long-Lived Low Voltage Li-Ion Cells37
Engineered CuO Nanofibers with Boosted Non-Enzymatic Glucose Sensing Performance37
Review—Recent Membranes for Vanadium Redox Flow Batteries36
Transport Phenomena in Low Temperature Lithium-Ion Battery Electrolytes36
Review—Recent Material Advances and Their Mechanistic Approaches for Room Temperature Chemiresistive Gas Sensors35
Editors’ Choice—Review—Activated Carbon Electrode Design: Engineering Tradeoff with Respect to Capacitive Deionization Performance35
Comparative Evaluation of LMR-NCM and NCA Cathode Active Materials in Multilayer Lithium-Ion Pouch Cells: Part I. Production, Electrode Characterization, and Formation35
High-Current Density Durability of Pt/C and PtCo/C Catalysts at Similar Particle Sizes in PEMFCs35
The LiNiO2 Cathode Active Material: A Comprehensive Study of Calcination Conditions and their Correlation with Physicochemical Properties. Part I. Structural Chemistry35
Worrisome Exaggeration of Activity of Electrocatalysts Destined for Steady-State Water Electrolysis by Polarization Curves from Transient Techniques35
Review—Challenges and Opportunities for Increased Current Density in Alkaline Electrolysis by Increasing the Operating Temperature34
Review—Progress of Research on the Preparation of Graphene Oxide via Electrochemical Approaches34
Review—Knowledge-Based Process Design for High Quality Production of NCM811 Cathodes34
Synthesis of Co-Free Ni-Rich Single Crystal Positive Electrode Materials for Lithium Ion Batteries: Part I. Two-Step Lithiation Method for Al- or Mg-Doped LiNiO234
Performance of Commercial Li-Ion Cells for Future NASA Missions and Aerospace Applications34
Investigation of the Impact of Flow of Vented Gas on Propagation of Thermal Runaway in a Li-Ion Battery Pack34
Review—Electrolyte and Electrode Designs for Enhanced Ion Transport Properties to Enable High Performance Lithium Batteries34
Formation and Electrochemical Characterisation of Enzyme-Assisted Formation of Polypyrrole and Polyaniline Nanocomposites with Embedded Glucose Oxidase and Gold Nanoparticles34
Evaluating the High-Voltage Stability of Conductive Carbon and Ethylene Carbonate with Various Lithium Salts34
Review—An Overview on Supercapacitors and Its Applications34
Impact of Catalyst Ink Dispersing Solvent on PEM Fuel Cell Performance and Durability33
Review—A Review on the Anode and Cathode Materials for Lithium-Ion Batteries with Improved Subzero Temperature Performance33
Electrochemical Dilatometry of Si-Bearing Electrodes: Dimensional Changes and Experiment Design33
Enhanced Corrosion Resistance of Additively Manufactured 316L Stainless Steel After Heat Treatment32
Degradation-Safety Analytics in Lithium-Ion Cells: Part I. Aging under Charge/Discharge Cycling32
Methods—Understanding Porous Electrode Impedance and the Implications for the Impedance Analysis of Li-Ion Battery Electrodes32
Evidence for Li+/H+ Exchange during Ambient Storage of Ni-Rich Cathode Active Materials32
Passivation-Induced Cr and Mo Enrichments of 316L Stainless Steel Surfaces and Effects of Controlled Pre-Oxidation31
Quantifying Negative Effects of Carbon-Binder Networks from Electrochemical Performance of Porous Li-Ion Electrodes31
Ion Clusters and Networks in Water-in-Salt Electrolytes31
A Comparative Study of Structural Changes during Long-Term Cycling of NCM-811 at Ambient and Elevated Temperatures31
The Dissolution Dilemma for Low Pt Loading Polymer Electrolyte Membrane Fuel Cell Catalysts31
Ionomer Optimization for Water Uptake and Swelling in Anion Exchange Membrane Electrolyzer: Hydrogen Evolution Electrode31
Effects of PEMFC Operational History under Dry/Wet Conditions on Additional Voltage Losses due to Ionomer Migration31
Review—Synthesis and Electrochemical Applications of Molybdenum Carbide: Recent Progress and Perspectives31
Editors’ Choice—Mechanistic Elucidation of Anion Intercalation into Graphite from Binary-Mixed Highly Concentrated Electrolytes via Complementary 19F MAS NMR and XRD Studies31
Operando Analysis of Interphase Dynamics in Anode-Free Solid-State Batteries with Sulfide Electrolytes31
Editors’ Choice—Economic Considerations for Low-Temperature Electrochemical Ammonia Production: Achieving Haber-Bosch Parity31
Review—Progress in Electrolytes for Rechargeable Aluminium Batteries31
Different Positive Electrodes for Anode-Free Lithium Metal Cells30
Platinum Nanoparticle-Decorated ZnO Nanorods Improved the Performance of Methanol Gas Sensor30
N-Doped Graphene Oxide as Additive for Fumed Silica Based Gel Electrolyte of Valve Regulated Lead Acid Batteries30
Influence of Supporting Electrolyte on Hydroxide Exchange Membrane Water Electrolysis Performance: Anolyte29
A Nitroxide Containing Organic Molecule in a Deep Eutectic Solvent for Flow Battery Applications29
The Role of Silicon in Silicon-Graphite Composite Electrodes Regarding Specific Capacity, Cycle Stability, and Expansion29
Factors that Affect Capacity in the Low Voltage Kinetic Hindrance Region of Ni-Rich Positive Electrode Materials and Diffusion Measurements from a Reinvented Approach29
Cu-Based MOF for Simultaneous Determination of Trace Tl (I) and Hg (II) by Stripping Voltammetry29
Review—Recent Advancements in Dye-Sensitized Solar Cells; From Photoelectrode to Counter Electrode28
Review—MoSe2 Nanostructures and Related Electrodes for Advanced Supercapacitor Developments28
Tungsten Infused Grain Boundaries Enabling Universal Performance Enhancement of Co-Free Ni-Rich Cathode Materials28
The LiNiO2 Cathode Active Material: A Comprehensive Study of Calcination Conditions and their Correlation with Physicochemical Properties Part II. Morphology28
Review—Recent Development of WO3 for Toxic Gas Sensors Applications27
Beneficial Effect of Li5FeO4 Lithium Source for Li-Ion Batteries with a Layered NMC Cathode and Si Anode27
Impact of Silicon Content within Silicon-Graphite Anodes on Performance and Li Concentration Profiles of Li-Ion Cells using Neutron Depth Profiling27
State of the Art of Lithium-Ion Pouch Cells in Automotive Applications: Cell Teardown and Characterization27
Review—Contemporary Progresses in Carbon-Based Electrode Material in Li-S Batteries27
Sensitive Detection of Aqueous Methanol by Electrochemical Route Using Mesoporous α-Fe2O3 Doped CdSe Nanostructures Modified Glassy Carbon Electrode27
A New Approach to Probe the Degradation of Fuel Cell Catalysts under Realistic Conditions: Combining Tests in a Gas Diffusion Electrode Setup with Small Angle X-ray Scattering27
Review—Clay Mineral Materials for Electrochemical Capacitance Application27
Transformation of the OER-Active IrOxSpecies under Transient Operation Conditions in PEM Water Electrolysis26
Review—A Pollutant Gas Sensor Based On Fe3O4 Nanostructures: A Review26
Increased Moisture Uptake of NCM622 Cathodes after Calendering due to Particle Breakage26
The Impact of Different Substituents in Fluorinated Cyclic Carbonates in the Performance of High Voltage Lithium-Ion Battery Electrolyte26
Modeling of Chemo-Mechanical Multi-Particle Interactions in Composite Electrodes for Liquid and Solid-State Li-Ion Batteries26
Review—Thermal Safety Management in Li-Ion Batteries: Current Issues and Perspectives26
How do Depth of Discharge, C-rate and Calendar Age Affect Capacity Retention, Impedance Growth, the Electrodes, and the Electrolyte in Li-Ion Cells?26
Roles of Phase Purity and Crystallinity on Chloramphenicol Sensing Performance of CuCo2O4/CuFe2O4-based Electrochemical Nanosensors26
Improved Low Temperature Performance of Graphite/Li Cells Using Isoxazole as a Novel Cosolvent in Electrolytes25
Enhancing Proton Conductivity and Durability of Crosslinked PBI-Based High-Temperature PEM: Effectively Doping a Novel Cerium Triphosphonic-isocyanurate25
Methods—PETLION: Open-Source Software for Millisecond-Scale Porous Electrode Theory-Based Lithium-Ion Battery Simulations25
Proficient Sanitary Wastewater Treatment in Laboratory and Field-Scale Microbial Fuel Cell with Anti-Biofouling Cu0.5Mn0.5Fe2O4 as Cathode Catalyst25
Highly Sensitive Hydrazine Detection Using a Vertically Oriented ZnO Nanosheet-based Field-Effect Transistor25
XPS and ToF-SIMS Investigation of Native Oxides and Passive Films Formed on Nickel Alloys Containing Chromium and Molybdenum25
Synthesis of γ-MnO2/PANI Composites for Supercapacitor Application in Acidic Electrolyte25
Perspective—Electrodeposition of Graphene Reinforced Metal Matrix Composites for Enhanced Mechanical and Physical Properties: A Review25
Modified Floating Electrode Apparatus for Advanced Characterization of Oxygen Reduction Reaction Electrocatalysts25
Review—Recent Advances in Sensor Arrays for the Simultaneous Electrochemical Detection of Multiple Analytes24
Highly Concentrated Electrolytes: Electrochemical and Physicochemical Characteristics of LiPF6 in Propylene Carbonate Solutions24
Tuning Fluorination of Linear Carbonate for Lithium-Ion Batteries24
Comparison of Ionic Transport Properties of Non-Aqueous Lithium and Sodium Hexafluorophosphate Electrolytes24
Pore Microstructure Impacts on Lithium Ion Transport and Rate Capability of Thick Sintered Electrodes24
Review—(Mn,Co)3O4-Based Spinels for SOFC Interconnect Coating Application24
KOH vs Deionized Water Operation in Anion Exchange Membrane Electrolyzers24
Mg–Sn Alloys as Anodes for Magnesium-Air Batteries24
Reversible and Irreversible Expansion of Lithium-Ion Batteries Under a Wide Range of Stress Factors24
Effects of Voltage-Dependence of the Constant Phase Element and Ohmic Parameters in the Modeling and Simulation of Cyclic Voltammograms24
Statistical Learning for Accurate and Interpretable Battery Lifetime Prediction24
Scanning Micro X-ray Fluorescence (μXRF) as an Effective Tool in Quantifying Fe Dissolution in LiFePO4 Cells: Towards a Mechanistic Understanding of Fe Dissolution24
Correlating Cation Mixing with Li Kinetics: Electrochemical and Li Diffusion Measurements on Li-Deficient LiNiO2 and Li-Excess LiNi0.5Mn0.5O224
Pressure and Temperature Dependence of the Hydrogen Oxidation and Evolution Reaction Kinetics on Pt Electrocatalysts via PEMFC-based Hydrogen-Pump Measurements23
Editors’ Choice—Ionomer Side Chain Length and Equivalent Weight Impact on High Current Density Transport Resistances in PEMFC Cathodes23
Biomass-Derived Graphene-Based Materials Embedded with Onion-Like Carbons for High Power Supercapacitors23
Synthesis of Phosphorus Doped Graphenes via the Yucel’s Method as the Positive Electrode of a Vanadium Redox Flow Battery23
Optimizing Electrolyte Additive Loadings in NMC532/Graphite Cells: Vinylene Carbonate and Ethylene Sulfate23
Revealing the Nanostructure of Mesoporous Fuel Cell Catalyst Supports for Durable, High-Power Performance23
Accelerated Durability Testing of Fuel Cell Stacks for Commercial Automotive Applications: A Case Study23
High Rate Lithium Ion Battery with Niobium Tungsten Oxide Anode23
Corrosion Susceptibility of Passive Films on 1060, 2024, and 5083 Aluminum Alloys: Experimental Study and First-Principles Calculations23
Investigating the Role of Mo and Cr during the Activation and Passivation of Ni-Based Alloys in Acidic Chloride Solution23
Editors’ Choice—Review—Designing Defects and Diffusion through Substitutions in Metal Halide Solid Electrolytes23
Dynamic Electrochemical Impedance Spectroscopy of Lithium-ion Batteries: Revealing Underlying Physics through Efficient Joint Time-Frequency Modeling23
Molecularly Imprinted Scaffold Based on poly (3-aminobenzoic acid) for Electrochemical Sensing of Vitamin B623
A Shrinking-Core Model for the Degradation of High-Nickel Cathodes (NMC811) in Li-Ion Batteries: Passivation Layer Growth and Oxygen Evolution23
Implications of Aqueous Processing for High Energy Density Cathode Materials: Part I. Ni-Rich Layered Oxides22
State of Charge Estimation for Lithium-Ion Batteries Based on TCN-LSTM Neural Networks22
Editors’ Choice—Quantification of the Impact of Chemo-Mechanical Degradation on the Performance and Cycling Stability of NCM-Based Cathodes in Solid-State Li-Ion Batteries22
A Simplified Mathematical Model for Heating-Induced Thermal Runaway of Lithium-Ion Batteries22
Application of a Simple and Sensitive Electrochemical Sensor in Simultaneous Determination of Paracetamol and Ascorbic Acid22
Galvanostatic Intermittent Titration Technique Reinvented: Part I. A Critical Review22
Long-Term Experience with a 5/15kW-Class Reversible Solid Oxide Cell System22
Review—Electrochemical Sensors for Large and Small Molecules in Biofluids22
Review—Reversible Heat Effects in Cells Relevant for Lithium-Ion Batteries22
Increased Disorder at Graphite Particle Edges Revealed by Multi-length Scale Characterization of Anodes from Fast-Charged Lithium-Ion Cells22
Review—Recent Advance in Multi-Metallic Metal Organic Frameworks (MM-MOFs) and Their Derivatives for Electrochemical Biosensor Application22
A Sensitive Electrochemical Assay for T4 Polynucleotide Kinase Activity Based on Fe3O4@TiO2 And Gold Nanoparticles Hybrid Probe Modified Magnetic Electrode22
Zirconium Phosphate Supported on g-C3N4 Nanocomposite for Sensitive Detection of Nitrite22
Influence of Lithium Ion Kinetics, Particle Morphology and Voids on the Electrochemical Performance of Composite Cathodes for All-Solid-State Batteries21
Theory of Transport in Highly Concentrated Electrolytes21
Influence of the Processing on the Ionic Conductivity of Solid-State Hybrid Electrolytes Based on Glass-Ceramic Particles Dispersed in PEO with LiTFSI21
Review-Enzymatic and Non-Enzymatic Electrochemical Sensor for Lactate Detection in Human Biofluids21
Distribution of Relaxation Times: A Tool for Measuring Oxygen Transport Resistivity of a Low–Pt PEM Fuel Cell Cathode21
Towards the Stability of Low-Temperature Aluminum Electrolysis21
Measuring the Nucleation Overpotential in Lithium Metal Batteries: Never Forget the Counter Electrode!21
Adsorption of 2-mercaptobenzimidazole Corrosion Inhibitor on Copper: DFT Study on Model Oxidized Interfaces21
Review—The Lithiation/Delithiation Behavior of Si-Based Electrodes: A Connection between Electrochemistry and Mechanics21
ZIF-8 Coupling with Reduced Graphene Oxide to Enhance the Electrochemical Sensing of Dopamine21
Review—Bipolar Plates for the Vanadium Redox Flow Battery21
Accelerated Battery Lifetime Simulations Using Adaptive Inter-Cycle Extrapolation Algorithm21
Understanding Diffusion and Electrochemical Reduction of Li+ Ions in Liquid Lithium Metal Batteries21
Photoelectrochemical Performance of SnS2 Sensitized TiO2 Nanotube for Protection of 304 Stainless Steel20
Impact of Graphite Materials on the Lifetime of NMC811/Graphite Pouch Cells: Part I. Material Properties, ARC Safety Tests, Gas Generation, and Room Temperature Cycling20
Review—Recent Progress in the Diversity of Inkjet-Printed Flexible Sensor Structures in Biomedical Engineering Applications20
Do Deep Eutectic Solvents Behave Like Ionic Liquid Electrolytes? A Perspective from the Electrode-Electrolyte Interface20
Effect of the Slurry Mixing Process on the Structural Properties of the Anode and the Resulting Fast-Charging Performance of the Lithium-Ion Battery Cell20
One-Step Solvothermal Preparation of Mn-Doped VO2(B) Nanosheets for High-Performance Supercapacitors20
A Direct Ammonia Fuel Cell with a KOH-Free Anode Feed Generating 180 mW cm−2 at 120 °C20
Study of Electrolyte and Electrode Composition Changes vs Time in Aged Li-Ion Cells20
Nonlinear Identifiability Analysis of the Porous Electrode Theory Model of Lithium-Ion Batteries20
Synthesis, Characterization, and Electrochemical Sensing Applications of Bimetallic Oxide/Carbon Nanomaterials Hybrids20
Assessing Reaction Mechanisms of Graphite Negative Electrodes Based on Operando Synchrotron Radiation Diffraction Data20
Local Inhibition by 2-mercaptobenzothiazole of Early Stage Intergranular Corrosion of Copper20
An Odor Recognition Algorithm of Electronic Noses Based on Convolutional Spiking Neural Network for Spoiled Food Identification20
Effects of Gas Diffusion Layer Substrates on PEFC Water Management: Part I. Operando Liquid Water Saturation and Gas Diffusion Properties20
Oxygen Permeation Resistances and Routes in Nanoscale Ionomer Thin Film on Platinum Surface20
Review—Recent Developments in the Applications of 2D Transition Metal Dichalcogenides as Electrocatalysts in the Generation of Hydrogen for Renewable Energy Conversion20
The Influence of Cycling, Temperature, and Electrode Gapping on the Safety of Prismatic Lithium-Ion Batteries20
Editors’ Choice—Review—Creating Electrocatalytic Heterojunctions for Efficient Photoelectrochemical CO2 Reduction to Chemical Fuels20
Review—The Oxygen Reduction Reaction on MXene-Based Catalysts: Progress and Prospects20
An Elementary Kinetic Model for the LSCF and LSCF-CGO Electrodes of Solid Oxide Cells: Impact of Operating Conditions and Degradation on the Electrode Response20
Achieving 5,000-h and 8,000-h Low-PGM Electrode Durability on Automotive Drive Cycles19
Ion Transport Mechanisms via Time-Dependent Local Structure and Dynamics in Highly Concentrated Electrolytes19
The Effects of Non-Uniform Mechanical Compression of Lithium-Ion Cells on Local Current Densities and Lithium Plating19
Effect of Solvent Motion on Ion Transport in Electrolytes19
Effect of Dispersion Method and Catalyst on the Crack Morphology and Performance of Catalyst Layer of PEMFC19
Implications of Aqueous Processing for High Energy Density Cathode Materials: Part II. Water-Induced Surface Species on LiNi0.8Co0.15Al0.05O219
Novel Method for Monitoring the Electrochemical Capacitance by In Situ Impedance Spectroscopy as Indicator for Particle Cracking of Nickel-Rich NCMs: Part II. Effect of Oxygen Release Dependent on Par19
Air-Stable Li6CoO4@Li5FeO4 Pre-Lithiation Reagent in Cathode Enabling High Performance Lithium-Ion Batteries19
A Systematic Study of the Role of Cathodic Polarization and New Findings on the Soft Sparking Phenomenon from Plasma Electrolytic Oxidation of an Al-Cu-Li Alloy19
A Reduced-Order Lumped Model for Li-Ion Battery Packs during Operation19
Influence of Laser Structuring and Calendering of Graphite Anodes on Electrode Properties and Cell Performance19
Investigation and Optimisation of Operating Conditions for Low-Temperature CO2Reduction to CO in a Forward-Bias Bipolar-Membrane Electrolyser19
A Method for Evaluating Soluble Redox Couple Stability Using Microelectrode Voltammetry19
Review—Highlights of UNSW All-Vanadium Redox Battery Development: 1983 to Present19
Cycling Performance of NMC811 Anode-Free Pouch Cells with 65 Different Electrolyte Formulations19
Accelerated Degradation Protocols for Iridium-Based Oxygen Evolving Catalysts in Water Splitting Devices19
Method—Practices and Pitfalls in Voltage Breakdown Analysis of Electrochemical Energy-Conversion Systems19
Mitigated Start-Up of PEMFC in Real Automotive Conditions: Local Experimental Investigation and Development of a New Accelerated Stress Test Protocol19
Interconnected Vertical δ-MnO2 Nanoflakes Coated by a Dopamine-Derived Carbon Thin Shell as a High-Performance Self-Supporting Cathode for Aqueous Zinc Ion Batteries19
The Effect of Cell Compression and Cathode Pressure on Hydrogen Crossover in PEM Water Electrolysis19
Battery Degradation-Aware Current Derating: An Effective Method to Prolong Lifetime and Ease Thermal Management19
Investigating the Role of Energy Density in Thermal Runaway of Lithium-Ion Batteries with Accelerating Rate Calorimetry19
Stochastically Modeled Gas Diffusion Layers: Effects of Binder and Polytetrafluoroethylene on Effective Gas Diffusivity19
Stable Cyclability Caused by Highly Dispersed Nanoporous Si Composite Anodes with Sulfide-based Solid Electrolyte19
Thick Sintered Electrode Lithium-Ion Battery Discharge Simulations: Incorporating Lithiation-Dependent Electronic Conductivity and Lithiation Gradient Due to Charge Cycle19
Critical Current Density Limitation of LLZO Solid Electrolyte: Microstructure vs Interface18
Multi-Mode Heat Transfer Simulations of the Onset and Propagation of Thermal Runaway in a Pack of Cylindrical Li-Ion Cells18
Going Beyond Sweep Voltammetry: Alternative Approaches in Search of the Elusive Electrochemical Stability of Polymer Electrolytes18
Distributed Fiber Optic Sensing to Assess In-Live Temperature Imaging Inside Batteries: Rayleigh and FBGs18
Interfacial Leveler-Accelerator Interactions in Cu Electrodeposition18
Review—Trends on the Development of Non-Enzymatic Electrochemical Sensors Modified with Metal-Oxide Nanostructures for the Quantification of Uric Acid18
Modeling Atmospheric Corrosion under Dynamic Thin Film Electrolyte18
An Electrochemical-Mechanical Phase Field Model for Lithium Dendrite18
Segmentation of Solid Oxide Cell Electrodes by Patch Convolutional Neural Network18
Operando Ultrasonic Monitoring of Lithium-Ion Battery Temperature and Behaviour at Different Cycling Rates and under Drive Cycle Conditions18
Review—Recent Advances in FSCV Detection of Neurochemicals via Waveform and Carbon Microelectrode Modification18
Review—Recent Advances on High-Capacity Li Ion-Rich Layered Manganese Oxide Cathodes18
Graphene-Gold Nanoparticles Nanozyme-Based Electrochemical Sensor with Enhanced Laccase-Like Activity for Determination of Phenolic Substrates18
Reduced Gassing In Lithium-Ion Batteries With Organosilicon Additives18
Comparative Evaluation of LMR-NCM and NCA Cathode Active Materials in Multilayer Lithium-Ion Pouch Cells: Part II. Rate Capability, Long-Term Stability, and Thermal Behavior18
Review—Concentration Measurements In Molten Chloride Salts Using Electrochemical Methods18
Mechanically Strong Double-Layered Aramid Nanofibers/MWCNTs/PANI Film Electrode for Flexible Supercapacitor18
Analysis on Thermal Runaway Behavior of Prismatic Lithium-Ion Batteries with Autoclave Calorimetry18
Respirometric In Situ Methods for Real-Time Monitoring of Corrosion Rates: Part II. Immersion18
Effect of Amorphous LiPON Coating on Electrochemical Performance of LiNi0.8Mn0.1Co0.1O2 (NMC811) in All Solid-State Batteries18
DandeLiion v1: An Extremely Fast Solver for the Newman Model of Lithium-Ion Battery (Dis)charge18
Multi-Scale Multi-Technique Characterization Approach for Analysis of PEM Electrolyzer Catalyst Layer Degradation18
Study Of Mercaptobenzimidazoles As Inhibitors For Copper Corrosion: Down to the Molecular Scale18
0.034062147140503