Chemistry and Technology of Fuels and Oils

Papers
(The median citation count of Chemistry and Technology of Fuels and Oils is 0. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-11-01 to 2024-11-01.)
ArticleCitations
Analysis of the Techniques for Measuring the Equilibrium Conditions of Gas Hydrates Formation11
Bio-Oil: Production, Modification, and Application11
Modelling Industrial Catalytic Reforming of Lowoctane Gasoline10
Effect of Lower Alcohols on the Formation of Methane Hydrate at Temperatures Below the Ice Melting Point10
Molecular Dynamics Simulation of CO2 Hydrate Growth and Intermolecular Weak Interaction Analysis8
Zeta Potential of Nanosized Particles of Cellulose as a Function of pH8
Design of Oil Shale In-Situ Extraction Heater Structure and Numerical Simulation of the Fracturing Process8
A Study of the Kinetics of the Reaction of Petroleum Coke with Phosphogypsum to Give Calcium Sulfide8
Forecasting Oil Demand with the Development of Comprehensive Tourism7
Research and Performance Evaluation of an Autogenic Acidic Fracturing Fluid System for High-Temperature Carbonate Reservoirs7
Experimental Study of Oilfield Water Plugging with Organic Chromium Gel7
Simulation of Filtration Fields with Different Completion Methods in Carbonate Gas Reservoirs6
Analysis of China’s Oil Trade Pattern and Structural Security Assessment from 2017 to 20216
Mechanical Properties of Shale under the Coupling Effect of Temperature and Confining Pressure6
Simulation Study of Hydrocarbon Generation Characteristics in Siliceous Rock6
Characteristics of Preferential Flow Paths in Reservoirs After Polymer Flooding and an Adaptive Compound Flooding Method6
Experimental Research on a Cyclone Air Flotation Separator for Polymer-Containing Wastewater5
Thermal Polycondensation Process and Petroleum Pitch Production5
The Relationship between CO2 Adsorption and Microporous Volume in a Porous Carbon Material5
Effect of Methanol on the Kinetics of Nucleation and Growth of Methane Hydrate5
Microdisplacement Mechanism of Polymer Flooding and Distributional Characteristics of Remaining Oil in Heavy-Oil Reservoirs5
Application in Oil Field Drilling with Temperature-Resistant Natural Modified Filtrate Reducer: A Review5
Plant Biomass as a Raw Material for Producing Basic Organic Sysnthesis Products5
Numerical Simulation of Fracture Initiation and Propagation in Oil Shale Horizontal Wells5
Environmental Performance Evaluation of Oil Refineries5
Nitration of Petroleum Asphaltenes with Concentrated Nitric Acid under Various Conditions4
Experimental Study on Synergistic Application of Temporary Plugging and Propping Technologies in SRV Fracturing of Gas Shales4
Determination of the Optimum Conditions for Synthesis of Modifying Additive Based on Acrylamide and Citric Acid with the Aim of Obtaining a Lignosulfonate Reagent for Drilling Fluids4
Biodiesel Production in the Presence of Eggshell Nano-Catalyst4
Forecast of Fossil Fuel Demand Based On Low Carbon Emissions from the Perspective of Energy Security4
Novel Method for Studying, the, Imbibition Production Mechanism Using NMR4
Investigation of the Dependence of the Softening Temperature on the Content of Mesophase in Petroleum Pitches Obtained from Heavy Pyrolysis Resin and Decant Oil4
Effects of Magnetic Fields on Combustion and Explosion4
Experimental Study on Enhancing Wellbore Stability of Coal Measures Formation with Surfactant Drilling Fluid4
Application of Oil Shale Molecular Sieve Catalyst: a Review4
Evaluation of the Efficiency of Functional Additives to Winter Diesel Fuels of Various Hydrocarbon Group Compositions4
Evaluation of Optimal Fungi Strains for Development of Mycelium-Based Biopolymeric Matrices4
Synthesis, Physicochemical Properties, and Strength Profile of Hydroprocessing Catalyst Supports Based on Aluminosilicate Halloysite Nanotubes4
Fracturing Optimization of New Wells Considering Cross-Well Interference in the Mahu Conglomerate Reservoir3
Research and Application of Plunger Airlift Draining Gas Recovery Intelligent Control Technology in Shale Gas Horizontal Wells3
The Current State of Development of Greases3
Conversion of High-Viscosity Oil of Ashalchinsk Deposit in the Presence of Activated Carbon and Supercritical Aqueous Fluid3
Hydrogen Production from Heavy Crude Oil3
The Wellbore Stability Study in Bedding Shale Formationon the Condition of Plasticity3
Hydrothermal Transformation of Superviscous Oil in the Presence of Coals, Metal Oxides, and Carbonates3
Research on the Measurement of Ship’s Tank Capacity Based on the Monte Carlo Method3
Experimental Research on the PDC Bit Wear Model3
A Model to Calculate Fracture Conductivity Considering Proppant Transport and Embedment Depth3
Increasing the Efficiency and Selectivity of Separation of Components in Chromatographic Analysis of Natural Gas3
Development and Performance of Urea–Formaldehyde Resin/Montmorillonite Intercalation Composite Horizontal well Plugging Agent3
Description of Formations Fault Activity Characteristics and Genesis Mechanism Using of Paleogeomorphic Restoration Techniques3
Study on Field Test and Plugging Simulation of the Knot Temporary Plugging Agent3
Investigation of the Physicochemical Relationships of the Production of a Polyelectrolyte Complex Based on Polydialldimethylammonium Chloride and Sodium Lignosulfonate as an Effective Inhibitor of Sal3
Modeling and Experimental Study of Self-Suspension Fracking Liquid Containing Nanoparticles3
Dynamic Analysis Method Research and Application of Shale Gas Horizontal Well3
Application of Electrochemical Model of a Lithium-Ion Battery3
Study of Forecasting and Estimation Methodology of Oilfield Development Cost Based on Machine Learning3
Performance Research and Field Application of the Knot Temporary Plugging Agent3
Study on the Preparation and System of Desulfonated Anti-High Temperature Fluid Loss Agent3
Research on the Fluid Flow Characteristics in the Process of Pump Closing in Cementing2
Urban Gas Load Forecasting Based on Time Series Methods2
Drilling Safety Assessed by Anisotropic Strength Criterion of Rocks in Deep Fractured Formation: Trajectory Optimization of Inclined Wells2
A Study on Characteristics of Unsaturated Sandy Soils Based on the CT Scanning Method2
Method for Designing and Checking Tensile Coefficient in Ultra-Deep Wells Based on Casing Axial Load and Quality Reliability2
Features of the Synthesis of Functional Carbon Materials from Plant Carbohydrates2
Hydrothermal Transformation of Organic Matter of Carbonate Rock near Critical Point of Water2
Development and Dynamic Analysis of a Torsional Vibration Damping Tool for PDC Bit2
Interpretable Fuzzy Granular Reasoning Framework for Industrial Dynamic Complex Event Recognition2
Depressant and Dispersant Additives for Diesel Fuel. Components, Brands, New Technologies and Developments2
Black Rice Huskash is a Useful Template for Foam Stability to Enhance Oil Recovery (EOR)2
Research on Production Pattern Optimization of Intermittent Wels2
Flow Mechanism and Transient Pressure Analysis of Multi-Stage Fractured Horizontal Well2
Extraction of a Seismic Signal of Hydraulic Fracturing Using Discrete Wavelet Transform2
Calculating Model of Frictional Pressure Drop for Gas Well During Foam Drainage2
Mechanism and Adaptability Evaluation of Well Soaking in Tight Reservoir2
Review of Application of Molecular Simulation in Inhibiting Surface Hydration Expansion of Clay Minerals2
Effect of the Composition and Structure of Nickel-Chromium Complex Oxides on the Upgrading of Heavy Oil in Supercritical Aqueous Fluid2
Analysis of Flow Characteristics and Influencing Factors of Severe Slugging Flow in an Underwater Pipe-Catenary Riser2
Effectiveness of Copolymer of Polymethylmethacrylate and Styrene as a Plugging Agent in Water-Based Drilling Fluids2
Gas Overflow Model and Analysis in a Fractured Formation2
Identification of Natural Gas Components Using the Support Vector Machine Model2
Correction to: Structural Features of CO2-Asphaltene Particles Precipitated from Vacuum Residue Using Various Organic Diluents2
Features of the Decomposition of Gas Hydrates in the Presence of Methanol at Atmospheric Pressure2
Nuclear Magnetic-Seepage Joint Measurement Experimental Technology and Field Application of Shale Oil Reservoir2
Derivatives of 2,5-Dimercapto-1,3,4-Thiadiazole as Multifunctional Lubricant Additives2
Deep Processing of Heavy Resids Based on TAIF-NK JSC Heavy Residue Conversion Complex2
Study on the Minimum Flow Pore Throat Radius and the Lower Limit of Petrophysical Properties of a Reservoir Under Three Seepage States2
Application of Experiment Planning for Optimization of Test Conditions When Evaluating Anti-Wear Properties of Aviation Kerosene2
Functional Materials Based on Carboxylated Nanofibrillar Cellulose2
Characteristics of Typical Shale Reservoir Development and Its Gas-Bearing Influencing Factors2
Study on Rock Mechanics Parameters and In-Situ Stress Profile Construction and Correction Method Based on Well Log Interpretation2
Theoretical Research on Output Response Characteristics of Vertical Longitudinal Multipole Conductance Sensor by Discrete Phase Distribution2
An Online Piecewise Linear Representation Method for Hydraulic Fracturing Time Series2
Technological Process of the Composite Casing Drilling Technology in Deep-Water Riserless well Construction2
Finite Element Analysis and Application of a Chain Pumping Unit Frame2
Oil Sludge Treatment by a Microemulsion System Containing Sodium Dodecyl Benzene Sulfonate2
Composite Fibers with Phase-Change Properties as Thermoregulating Additives to Dry Mortar Mixes with the Possibility of Bimodal Heating2
Numerical Simulation and Sensitivity Evaluation of Fracture Flooding in a Class III Reservoir2
Development of Eco-Friendly Acid Composition for the Treatment of High-Temperature Geothermal Carbonate Reservoirs2
The Blocking Properties of Styrene-Styrene Sulfonic Acid Sodium Salt Copolymer as a Nanodispersing Agent in Water-Based Drilling Fluids2
Improvement of the Tribological Properties of Polyurea Lubricants by the Use of Functional Additives2
Research of a Self-Adaptive High-Performance Re-Fracturing Technology with Knot Temporary Plugging in a Thin Reservoir with High Stress2
Experimental Study of Anisotropic Characteristics of a Specific Formation Shale1
Study on Seepage Characteristics and Capacity Evaluation of Shale Gas Reservoirs1
A Fracture Toughness-Based Evaluation Method for Deep Shale Oil Reservoir Compressibility1
Contribution of Deep Hydrocarbons in Gas Hydrate Formation1
Development of a Method for Predicting the Quality of Petroleum Coke1
Calculation of Formation Overpressure and Its Role in Hydrocarbon Accumulation1
Research to Identify Factors Influencing the Country’s Energy Security Based on Text Data Mining Technology1
Molecular Simulation of Hydration Characteristics of Montmorillonite under Potassium Salt Inhibitor1
Prediction of Gas/Water Relative Permeability Using the GWO-LSSVM Model Under HTHP Condition1
Characteristics of Asphaltene Fractions Responsible for the Formation of Stable Water‑Oil Emulsions1
Application of Ebullated-Bed Vacuum Residue Hydrocracking at Lukoil Neftohim Burgas1
Diesel Fuel for Use in Arctic and Subtropical Climates1
Synthesis of Mixed Zinc and Iron Oxides and Investigation of their Catalytic Activity for Hydrothermal Refining of Heavy Oil1
Experimental Quantification of Oil Displacement Efficiency in Pores and Throats with Varied Sizes in Conglomerate Oil Reservoirs Through CO2 Flooding1
Low-Temperature Flow Performance Improver for Saddle Diesel1
Best Practices When Operating a Unit for Removing Hydrogen Sulfide from Residual Fuel Oil1
Investigation of Physicochemical Properties of Initial Components for Polyelectrolyte Complex – Reagent for Oil and Gas Production1
Study on Different Kinds of Drill Bits and Their Usage in Hard-to-Drill Formations1
Development of Technology and Production Characteristics for Deeply Oxidized Roofing Bitumen1
Experimental Study on Areal Flowing During Depletion of a High-Pressure Heterogeneous Gas Reservoir1
Analysis of Casing Instability and Factors Influencing it in Thermal Production Oil Wells1
Predicting the Distribution of Calcareous Glutenite in a Particular Formation1
Simulation of the Process of Discharging a Lithium-Ion Battery in Relation to the Sensitivity of Its Parameters1
Research on Steam Simulation of the Formation and Gasification of Siliceous Rocks1
Study on the Velocity of the Temporary Plugging Agent Along Wellbore in a Fracturing Operation1
Measurement of CBM Bubble Parameters by Double-Sensor Conductivity Probe1
Bottlenecks and Technological Developments for Geologic Storage of CO21
Quantitative Study of Diagenesis and Dissolution Porosity in Conglomerate Reservoirs1
New Methods for Atomic-Absorption Determination of Metals in Aviation and Automotive Gasolines1
Influence of Measurement Parameters on the Accuracy of Determining the Capacity of a Vertical Tank1
Thermodynamic Calculation of the Decomposition of Inorganic Sulphur in Coal in Oxy-Fuel Atmosphere1
The Stability of Cementite in the Presence of Water at Extreme Temperatures and Pressures1
Coarsely Granulated Macroporous Adsorbent for Adsorption Cleaning of Heavy Oil Stock1
Effect of Surface Concentration of Nickel on the Activity and Selectivity of Ni/ZnO-Al2O3 Sorbents in Reactive–Adsorption Desulfurization of Olefin-Containing Feedstock1
Study into the Specific Surface Area and Pore Space of Carbon Additives for Veba Combi Cracking (VCC)1
A Review on the Application of Numerical Simulation of Oil Shale Electrical Heating Technology1
Solving the Problems of High-Temperature Sulfur Corrosion in Primary Oil Refineries1
Deposit Formation in Equipment for the Petroleum and Natural Gas Industry1
Noncatalytic Technologies for Processing Oil Residues and Heavy Oils1
Study on Factors of the Fracture Width in Tight Sandstone1
Comparative Analysis of Fracture Characteristics and Mechanical Properties of Shale and Slate Based on Triaxial Compression Test1
Thermal Insulation Performance Evaluation and Installation Length Optimization of Inner Coating Thermal Insulation Drillpipe1
Research on Development Effect Standards of Polymer Flooding Well Group Based on ENKF Method1
Characterization of Pore Structure and Water-Driven Residual Oil Distribution in Low-Permeability Reservoirs Based on Digital Cores1
Investigation of Inhibiting, Lubricating, and Emulsifying Ability of Products Based on Raw Materials of Plant Origin for Further Use in Drilling Fluids1
Pyrolysis of Oil Shale Based on Electromagnetic Heating Technology – A Review1
Fracture Trajectory Simulation of Steering Fracturing Based on Three-Field Coupling Stress1
Approximation of the Separation Boundary in Water-Hydrotrope-Oil Ternary Systems1
Effect of Surfactants on the Crystallization and Solidification Temperatures of Paraffin in Various Types of Solvents1
Research on Factors Influencing Weak Alkali Surfactant Polymer Flooding System1
Preparation of Polyacrylamide Konjac Gum Double Network Gel Liquid Bridge Plug1
Finite Element Analysis and Installation Optimization Design of Negative Pressure Vibrating Screen Exciter1
Research and Development of Virtual Assembly and Machining System for Metal Cutting Petroleum Machinery Based on Kinect v21
Simulation Study of the Effect of Fractures on Convective Heating Efficiency in Oil Shale1
Prospects for the Use of Synthetic Hydrocarbon Bases – The Dispersion Media of Nonaqueous Drilling Fluids1
Crystallization of Zeolite X from Kaolins of Various Deposits Used in Adsorbents for Drying and Removing Hydrogen Sulfide in Natural and Associated Petroleum Gas1
Efficient Utilization of Energy of Natural Gas Pressure Drop1
Analysis of Properties of Diesel Fuels of Different Origins for Their Use as Feedstock for Producing Hydrocarbon Bases for Drilling Fluids1
Destruction of an Oil Paraffin Fraction by Microorganisms1
Comaparison of Results of Oil Fractions Separation Process Modeling Using real and Pseudocomponents1
Development and Application of a Novel Nano-Micron Plugging Agent with Core-Shell Structure for Oil-Based Drilling Fluids1
Application of the Electrometric Method to Determine the Free Water Content of Jet Fuels1
Trace Elements in Bitumoids from Crystalline Basement Rocks of the South-Tatarian Arch1
International Approach to Well Integrity1
Co-Deposition Mechanism of Waxes with Asphaltenes and Scales in a Vertical Wellbore of Gas Condensate Well1
Quantitative Study on Matching Relationship Between a Preformed Particle Gel Particle and a Pore Throat1
The Use of Biochar as Filler in Polyurea Lubricants1
Study on Wettability and Static Imbibition Law of Tight Reservoir Based on Nuclear Magnetic Resonance Test1
Renewable Energy Technology Innovation Effect on the Economics Growth1
Direction Optimization Model of Trenchless Horizontal Hole in Fractured Formation1
Some Mechanisms of Change in Properties of Diesel Fuels at Low Temperatures1
Optimization of Main Functional Groups of High Efficiency Hydration Inhibitors in Shale Based on Quantum Mechanical Simulation1
Study on Stress – Fluid Coupling of Coal Seam Floor Water Outburst Based on FLAC 3D Simulation1
Methods and Technologies for Creating a New Generation of Fuel Storage and Transportation Facilities1
Study on a New System of Water Unlocking in Tight Sandstone Gas Reservoirs1
Research on the Influence Mechanism of Tectonic Stress in the «Three Hard» Coal Seam in Coalfield on Rockbursts1
Laser Raman Spectroscopy – An Effective Method for Total Process Control of Poly-α-Olefin Oil Production1
Effect of Poroelasticity on the Integrity of Cement Sheath in Heavy Oil Wells1
A New Prediction Model of Water Breakthrough Time of Horizontal Well in Inclined Edge-Water Low Permeability Gas Reservoir1
Effects of Hybrid Microwave Heating on the Structural and Mechanical Properties of Heavy Oil1
Research on the Exploration of Petrochemical Virtual Simulation Laboratory Construction Based on VR Technology1
Analysis of the Origin of Calcite Cements and Fluid Sources in Limestone Formations Based on Petrology and Geochemical Data1
Growth Features of Gas Hydrate Films at Interface of Liquid Carbon Dioxide with Water and Sodium Dodecyl Sulfate Solution in Teflon and Steel Cuvettes1
Stability, Treatment, and Enhance Oil Recovery Ability of Fluorescent Preformed Gel CQDS@PPG, and its Migration Status Study1
Additives to Biodiesel Fuels1
Selection of Absorbent and Technological Parameters for Purification of Natural Gas with Equal Ratio of Acidic Components1
Copolymer Grafted Nano Silica Particles for Enhanced Oil Recovery from Low-Permeability Reservoirs1
Experimental Study on Dynamic and Static Rock Mechanical Properties of Tight Sandstone Gas Reservoir1
Increasing Drilling Speed in Hard-to-Drill Formations with Various Types of Tools1
Experimental Study of Natural Gas Hydrate Formation in a Porous Medium in the Presence of Aqueous Solutions of Sodium Chloride and Sodium Bicarbonate1
Study of the Formation of Natural Gas Hydrate in a Porous Medium from a Mixture of Polymer Solutions with Oil1
Explosive Behavior of CH4/C2H6/C3H8 Mixtures in the SAGD Process with CO2 Fusion Gases in Extra-Heavy Oil Reservoirs1
Influence of Hydrothermal Fluids on Composition of Heavy Oils1
Application of Comprehensive Geophysical Prospecting Method in Fine Detection of Goaf1
Study of the Composition and Physicochemical Properties of a Modifying Additive to a Lignosulfonate Drilling Reagent1
A Modified Model of Cement Sheath Stress Distribution with a Fixed Far-Field Displacement Boundary Condition1
Updating Packed Fractionating Columns Using Mathematical Model of Multicomponent Mixture Separation1
Thermodynamic Analysis of Alternating Cyclic Steam and Flue Gas Injection for Colombian Heavy Oils1
New NiMo/Al2O3 Catalysts for Hydrodearomatization of Secondary Middle Distillates1
Thermal Conductivity of Oil Fractions at High Pressure1
In-Situ Stress Determination in Anisotropic Formation Underground with the Help of Wellbore Breakout Observations1
Research on Gel Plugging Technology of Coalbed Methanein Deposit1
Tracer Research Methods for Hydrocarbon Substances in Shale Oil Reservoirs1
Simulation Analysis of Drilling Process in Horizontal Wells with Mechanical Rotary Percussion Tool1
Research Progress of Friendly Carbon Dioxide Expansion Flooding: A Review1
Determination of Jet Pump Performance when Eliminating Borehole Hydrates1
Composition of Sulfur-Linked Fragments in Asphaltene Components of Heavy Fuel Oil and its Pyrolysis Products1
Study on Vibration Energy Conversion Efficiency of the Drill String Absorption & Hydraulic Supercharging Device1
Fracturing Design and Field Application of Tight Sandstone Reservoir with Ripple Lamination and Natural Fractures1
Mechanism of Imbibition in Shale Pores Based on Imbibition Nuclear Magnetic Experiment and LBM Method1
A New Wellbore Stability Model for Shale Gas Horizontal Wells with Effects of Bedding Planes and Water Content1
Animal Biomass as a Raw Material for Basic Organic Synthesis Products1
Prediction of Shear-Wave Velocities in Carbonate Reservoirs1
Study on the Lithological Characteristics and Its Controlling on the Development of Specific Tight Sandstone Reservoirs1
Analysis of COVID-19 Impact on Natural Gas Supply Reliability1
Discovery of Microbial Mounds and Its Geological Significance1
Effect of Front Water Flooding Injection-Production Parameters on Polymer Flooding Recovery in a Conglomerate Reservoir1
Study on Plugging Mechanism of Gel Plugging Agent in Fractured Carbonate Oil Reservoirs1
Epoxy Resin Water-Based Modification Method1
Surge and Swab Pressure Calculation Considering Casing Coupling0
Influence of Mechanical Rotary Percussion Tool on Friction Drag in Horizontal Wells0
A New Method for Calculating the Characteristic Shape of the Water Ridge Under Horizontal Production Wells in Marine Sandstone Heavy Oil Reservoirs with Bottom Water0
Simulation of the Influence of Fracture Gas State on Gas-Liquid Replacement Based on Fluent Two-Phase Flow0
Sample-Preparation Methods for Oil-Refining Process Catalysts to Determine Their Elemental Compositions by Atomic Spectroscopy0
New Intelligent Model of Cuttings Logging Based on Grey Clustering0
Thermogravimetric Analysis of Heavy Oil Oxidation in the Presence of Nickel Based Catalysts0
Research on Geochemical Response Characteristics of Dry Hot Rocks Injected with Scale Removal pH Modified Fluid0
Research on Capacity Measurement Method of Horizontal Cylindrical Tank Based on Monte Carlo Method0
Effect of the Component Composition of Oils on their Structural and Mechanical Properties0
Geochemical Characteristics and Main Controlling Factors of Middle-Upper Cambrian Carbonate Reservoir0
Simulation Research on EOR Technology and Mechanism of Sandstone Reservoir Injected with Foam0
Development and Application of a Kind of Chemicalcementing Strong Wall Agent0
Correction to: Prediction of Yields of Lower Olefins during Pyrolysis of Hydrocarbon Feedstock0
Production Technology of a Spherical Support for a Continuous Reforming Catalyst0
Some Approaches to the Assessment of Shale Oil and Gas Resources0
Study on Water Intrusion Flow Model of the Tight Gas Reservoir0
Nucleation of Methane Hydrate in the Presence of Nanofibrillar Cellulose0
Formation of С10–С14 Adamantanes from Petroleum Protoadamantanes0
Quantitative Effects of Different Factors on the Thermal Characteristics of New Submarine Hot Oil Pipeline During the Preheating Process0
Reducing the Carbon Footprint of Petrochemical Products – on the Way to “Green Chemistry”0
A New HAZOP Automated Method for the Oil and Gas Complex Equipment0
Synthesis and Investigation of Nickel–Aluminum Oxide Catalysts on a Carbon Support0
Preparation of Nickel 2‑Ethylhexanoate, a Precursor of Cracking Catalysts for Heavy Hydrocarbon Feedstocks0
Influence of Sensitive Parameters on Pressure Wave Velocity of Gas Drilling Fluid0
Fault Leakage Behaviors and Co2 Migration in Different Types of Geological Carbon Storage0
Corrosion Behavior of N80 Steel in Underground Supercritical CO2 Environments0
Comprehensive Reservoir Comparison Technique for Complex Reservoirs0
Research on Covariance Localization of Enkf Reservoir-Assisted History Fitting Method Based on Fast Marching Method0
0.030865907669067