Angle Orthodontist

Papers
(The median citation count of Angle Orthodontist is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-11-01 to 2024-11-01.)
ArticleCitations
Effect of clear aligner wear protocol on the efficacy of tooth movement:79
Evaluation of automated cephalometric analysis based on the latest deep learning method47
Maxillary arch development with Invisalign system:45
Effectiveness of an anterior mini-screw in achieving incisor intrusion and palatal root torque for anterior retraction with clear aligners:41
A comparison between stereophotogrammetry and smartphone structured light technology for three-dimensional face scanning35
Differences in finished case quality between Invisalign and traditional fixed appliances:34
Evaluation of factors related to the success of miniscrew-assisted rapid palatal expansion33
Effect of injectable platelet-rich fibrin (i-PRF) on the rate of tooth movement:32
Survival estimates and risk factors for failure of palatal and buccal mini-implants31
Comparison of skeletal maxillary transverse deficiency treated by microimplant-assisted rapid palatal expansion and tooth-borne expansion during the post-pubertal growth spurt stage:30
Long-term effects of mini-screw–assisted rapid palatal expansion on airway:30
Effects of Invisalign (G5) with virtual bite ramps for skeletal deep overbite malocclusion correction in adults26
The nature and accuracy of Instagram posts concerning marketed orthodontic products:26
Three-dimensional assessment of the spheno-occipital synchondrosis and clivus after tooth-borne and bone-borne rapid maxillary expansion:26
Temporomandibular disorders in prospective orthodontic patients:21
Total arch maxillary distalization using infrazygomatic crest miniscrews in the treatment of Class II malocclusion: a prospective study21
Effects of orthodontic treatment with aligners and fixed appliances on speech:19
Transfer accuracy of 3D-printed trays for indirect bonding of orthodontic brackets:19
Volumetric cone-beam computed tomography evaluation and risk factor analysis of external apical root resorption with clear aligner therapy18
The effect of platelet-rich fibrin (PRF) on maxillary incisor retraction rate18
Micro computed tomography evaluation of Invisalign aligner thickness homogeneity17
Comparative assessment of relapse and failure between CAD/CAM stainless steel and standard stainless steel fixed retainers in orthodontic retention patients:17
The efficacy of fluoride varnish vs a filled resin sealant for preventing white spot lesions during orthodontic treatment:16
Effect of orthodontic force on dental pulp histomorphology and tissue factor expression:16
Occlusal contacts and treatment with the Invisalign appliance: a retrospective analysis of predicted vs achieved outcomes16
Bracket transfer accuracy with two different three-dimensional printed transfer trays vs silicone transfer trays15
Stability and success rate of dual-thread miniscrews:15
Insight into clear aligner therapy protocols and preferences among members of the American Association of Orthodontists in the United States and Canada15
Effects of different lingual retainers on periodontal health and stability15
Quality of life in an adolescent orthodontic population:15
Predictors of patient compliance during Class II division 1 malocclusion functional orthodontic treatment14
Orthopedic outcomes of hybrid and conventional Hyrax expanders:14
Changes in the gingival thickness and keratinized gingival width of maxillary and mandibular anterior teeth after orthodontic treatment14
Impact of photobiomodulation and low-intensity pulsed ultrasound adjunctive interventions on orthodontic treatment duration during clear aligner therapy:14
Novel three-dimensional methods to analyze the morphology of the nasal cavity and pharyngeal airway14
Anatomical limitations and factors influencing molar distalization14
Trends in orthodontic management strategies for patients with congenitally missing lateral incisors and premolars13
Prevalence of mandibular asymmetry in different skeletal sagittal patterns:13
Analysis of overcorrection to be included for planning clear aligner therapy: a retrospective study13
Assessment of preparation time and 1-year Invisalign aligner attachment survival using flowable and packable composites:13
Three-dimensional cone-beam computed tomography comparison of shorty and standard Class II Carriere Motion appliance13
Automated landmark identification on cone-beam computed tomography: Accuracy and reliability13
Comparison of the accuracy of digital face scans obtained by two different scanners:12
In vitro Streptococcus mutans adhesion and biofilm formation on different esthetic orthodontic archwires12
Does the presence of maxillary midline diastema influence the perception of dentofacial esthetics in video analysis?12
Long-term assessment of conventional and mini-screw–assisted rapid palatal expansion on the nasal cavity12
Corticotomy depth and regional acceleratory phenomenon intensity:12
Investigation and comparison of patient experiences with removable functional appliances:12
Skeletal width changes after mini-implant–assisted rapid maxillary expansion (MARME) in young adults11
Does YouTube provide adequate information about orthodontic pain?11
The effectiveness of locally injected platelet-rich plasma on orthodontic tooth movement acceleration:11
Association between malocclusion and articulation of phonemes in early childhood10
Traditional vs digital communication channels for improving compliance with fixed orthodontic treatment:10
Comprehensive comparison of canine retraction using NiTi closed coil springs vs elastomeric chains:10
Treatment planning protocols with the Invisalign appliance: an exploratory survey10
The quality of etched enamel in different regions and tooth types and its significance in bonding and the development of white spot lesions10
Root resorption associated with maxillary buccal segment intrusion using variable force magnitudes:10
Osteoblast lineage cells and periodontal ligament fibroblasts regulate orthodontic tooth movement that is dependent on Nuclear Factor-kappa B (NF-kB) activation10
Effects of submucosally administered platelet-rich plasma on the rate of tooth movement:10
Effects of different distalization directions and methods on maxillary total distalization with clear aligners: a finite element study9
Tooth movement, orofacial pain, and leptin, interleukin-1β, and tumor necrosis factor–α levels in obese adolescents9
What is the survival rate of deciduous molars in cases with agenesis of premolar successors? A systematic review9
Expansion rebound deformation of clear aligners and its biomechanical influence: a three-dimensional morphologic analysis and finite element analysis study9
Alveolar bone thickness and height changes following incisor retraction treatment with microimplants:9
Evaluation of an individualized facial growth prediction model based on the multivariate partial least squares method9
The predictability of maxillary curve of Spee leveling with the Invisalign appliance9
Anchorage control using miniscrews in comparison to Essix appliance in treatment of postpubertal patients with Class II malocclusion using Carrière Motion Appliance:9
Disentangling the effects of CAD/CAM customized appliances and piezocision in orthodontic treatment:9
The reliability and reproducibility of an Android cephalometric smartphone application in comparison with the conventional method9
One-year comparative assessment of retention of arch width increases between modified vacuum-formed and Hawley retainers:8
Perceived pain during rapid maxillary expansion in children with different expanders:8
How well do integrated 3D models predict alveolar defects after treatment with clear aligners?8
Effect of low-level laser therapy on the time needed for leveling and alignment of mandibular anterior crowding:8
Influence of intraoral application of antiseptics and fluorides during orthodontic treatment on corrosion and mechanical characteristics of nickel-titanium alloy in orthodontic appliances8
Nonsurgical treatment of a hyperdivergent skeletal Class III patient with mini-screw–assisted mandibular dentition distalization and flattening of the occlusal plane8
Smile microesthetics as perceived by dental professionals and laypersons8
Factors influencing treatment efficiency:8
Does YouTube offer high-quality ınformation? Evaluation of patient experience videos after orthognathic surgery8
Skeletal and dentoalveolar effects of slow vs rapid activation protocols of miniscrew-supported maxillary expanders in adolescents: A randomized clinical trial8
Correlation of spheno-occipital synchondrosis fusion stages with a hand-wrist skeletal maturity index: A cone beam computed tomography study8
Incisor position and alveolar bone thickness:8
Comparison of facemask therapy effects using skeletal and tooth-borne anchorage:8
Effect of attachment type on distal bodily movement of the maxillary canine in aligner orthodontics: a finite element study8
Predicting the mandibular growth spurt:8
Cytotoxic evaluation of two orthodontic silver solder materials on human periodontal ligament fibroblast cells and the effects of antioxidant and antiapoptotic reagents8
Temporary anchorage devices in orthodontics: a bibliometric analysis of the 50 most-cited articles from 2012 to 20228
Anterior openbite malocclusion in adults:8
Effect of orthodontic treatment on periodontal health of periodontally compromised patients:7
Correlation between malocclusion and history of bullying in vulnerable adolescents7
Total maxillary arch distalization by using headgear in an adult patient:7
The accuracy of artificial intelligence–based virtual assistants in responding to routinely asked questions about orthodontics7
Evaluation of an automated superimposition method based on multiple landmarks for growing patients7
A comparative study between the effect of reverse curve of Spee archwires and anterior bite turbos in the treatment of deep overbite cases:7
Antimicrobial properties, mechanics, and fluoride release of ionomeric cements modified by red propolis7
Effect of surface treatment on the mechanical stability of orthodontic miniscrews:7
Alveolar bone changes after molar protraction in young adults with missing mandibular second premolars or first molars7
Effect of salvianolic acid B on new bone formation in the orthopedically expanded suture:6
Rapid maxillary expansion vs slow maxillary expansion in patients with cleft lip and/or palate: a systematic review and meta-analysis6
Genetic and environmental components of vertical growth in mono- and dizygotic twins up to 15–18 years of age6
Adaptational changes in clear aligner fit with time:6
Accuracy of planned tooth movement with lingual straight wire technique6
White spot lesions in orthodontics: consensus statements for prevention and management6
Three-dimensional assessment of palatal area changes after posterior crossbite correction with tooth-borne and tooth bone–borne rapid maxillary expansion: A randomized controlled trial with 5-year 6
Cranial base measurements in different anteroposterior skeletal relationships using Bjork-Jarabak analysis6
Torque control of maxillary anterior teeth with the double J retractor and palatal miniscrews during en masse retraction:6
Speech performance in adult patients undergoing Invisalign treatment:6
Antimicrobial resistance of bacterial strains in patients undergoing orthodontic treatment with and without fixed appliances6
Mandibular retromolar space in adults with different sagittal skeletal patterns: Cone-beam computed tomography analysis6
Comparison of individualized facial growth prediction models based on the partial least squares and artificial intelligence6
Labial frenectomy: current clinical practice of orthodontists in the United Kingdom6
Outcome assessment of orthodontic clear aligner vs fixed appliance treatment in adolescents with moderate to severe malocclusions6
Characterization of phenotypes of skeletal Class III malocclusion in Korean adult patients treated with orthognathic surgery using cluster analysis6
Skeletal and dentoalveolar effects of miniscrew-assisted rapid palatal expansion based on the length of the miniscrew: a randomized clinical trial6
The effect of nitrogen-doped titanium dioxide–modified stainless steel brackets on Streptococcus mutans:6
Aligners, Environmental Contamination, and The Role of Orthodontics6
Precision and accuracy assessment of single and multicamera three-dimensional photogrammetry compared with direct anthropometry6
Three-dimensional changes after maxillary molar distalization with a miniscrew-anchored cantilever6
Efficacy of CPP-ACP fluoride varnish applied with and without acid etching in preventing enamel demineralization compared to light-curable fluoride varnish6
Neural networks for classification of cervical vertebrae maturation: a systematic review5
Is the adolescent's esthetic concern associated with anterior occlusal conditions or the malocclusion severity level?5
Predicted overbite and overjet changes with the Invisalign appliance: a validation study5
Relevance of practice-based research to orthodontics5
The effect of social media on patient acceptance of temporary anchorage devices:5
Comparison between clear aligners and 2 × 4 mechanics in the mixed dentition: a randomized clinical trial5
Evaluation of the rate of anterior segment retraction in orthodontic patients with bimaxillary protrusion using friction vs frictionless mechanics: a single-center, single-blind randomized clinical tr5
Evaluation of self-perceived pain and jaw function impairment in children undergoing slow and rapid maxillary expansion:5
A comparison of treatment results of adult deep-bite cases treated with lingual and labial fixed appliances5
Dimensional changes in the palate associated with Invisalign First System: a pilot study5
Association between malocclusion in the mixed dentition with breastfeeding and past nonnutritive sucking habits in school-age children5
Role of six cytokines and bone metabolism biomarkers in gingival crevicular fluid in patients undergoing fixed orthodontic appliance treatment in comparison with aligners: a clinical study5
Corrosion of orthodontic brackets: qualitative and quantitative surface analysis5
Buccal alveolar bone changes following rapid maxillary expansion and fixed appliance therapy5
Evaluation of torque moment in esthetic brackets from bendable alloy wires5
Effectiveness of miniscrew-supported maxillary molar distalization according to temporary anchorage device features and appliance design: systematic review and meta-analysis5
A comparative assessment of the amount and rate of orthodontic space closure toward a healed vs recent lower premolar extraction site:5
The effect of N-acetylcysteine on the antibacterial capability and biocompatibility of nano silver–containing orthodontic cement5
Patient-reported outcomes of slow vs rapid miniscrew-supported maxillary expansion in adolescents: secondary outcomes of a randomized clinical trial5
Evaluation of adolescent and adult patients treated with the Carriere Motion Class III appliance followed by fixed appliances5
Oral appliance–generated malocclusion traits during the long-term management of obstructive sleep apnea in adults:5
Combined orthodontic and surgical open bite correction:5
Do sample size calculations in longitudinal orthodontic trials use the advantages of this study design?5
Content analysis of AI-generated (ChatGPT) responses concerning orthodontic clear aligners5
Indirect bonding: an in-vitro comparison of a Polyjet printed versus a conventional silicone transfer tray5
Evaluation of volume change in oral cavity proper before and after mandibular advancement:5
Retrognathic maxilla in individuals born with oral clefts is due to intrinsic factors and not only due to early surgical treatment5
Three-dimensional surgical guide approach to correcting skeletal Class II malocclusion with idiopathic condylar resorption4
Comparison of labio-palatal incisor movement between two wear protocols: a retrospective cohort study4
Predicted and achieved overjet and overbite measurements with the Invisalign appliance: a retrospective study4
Can text messages encourage flossing among orthodontic patients?4
Evaluation of relapse with thermoplastic retainers equipped with microsensors4
Effect of maxillary and mandibular extrusion arches on dentoskeletal changes in adults with anterior open bite: a quantitative analysis4
Proximity of upper central incisors to incisive canal among subjects with maxillary dentoalveolar protrusion in various facial growth patterns:4
Assessment of reliability in orthodontic literature:4
A comparison of the effects of Forsus appliances with and without temporary anchorage devices for skeletal Class II malocclusion:4
Angular and positional changes of the maxillary third molars after orthodontic treatment with different premolar extraction patterns4
Is self-harm among orthodontic patients related to dislike of dentofacial features and oral health-related quality of life?4
Lithium reduces orthodontically induced root resorption by suppressing cell death, hyalinization, and odontoclast formation in rats4
Integration accuracy of craniofacial cone-beam computed tomography images with three-dimensional facial scans according to different registration areas4
Nonsurgical orthodontic correction of facial asymmetry by condylar remodeling and mandibular repositioning following occlusal cant correction with microimplants: a case report4
Effectiveness of platelet rich fibrin versus demineralized bone xenograft in periodontally accelerated osteogenic orthodontics:4
Comparison of objective wear time between monoblock and twin-block appliances measured by microsensor4
Accuracy of palatal orthodontic mini-implants placed by conventionally or CAD/CAM-based surgical guides: a comparative in vitro study4
Relative anchorage loss under reciprocal anchorage in mandibular premolar extraction cases treated with clear aligners4
FGF10andFGF13genetic variation and tooth-size discrepancies3
Clear aligner biomechanical limitations: anchorage and couple (torque) development3
Treatment outcomes of various force applications in growing patients with skeletal Class III malocclusion:3
Dental students' interest in orthodontic careers: do orthodontic-related experiences and faculty and practitioner role models matter?3
Association between arch width changes and long-term stability 20 years after orthodontic treatment with and without extractions3
Effect of craniofacial morphology on gingival parameters of mandibular incisors3
Activation and installation of orthodontic appliances temporarily impairs mastication:3
Influence of ibuprofen combined with corticotomy on tooth movement and alveolar bone remodeling in rats3
Evaluation of systemic Omega-3 PUFAs effect on orthodontic tooth movement in a rabbit model: RCT3
Surgical-orthodontic treatment for severe malocclusion in a patient with osteopetrosis and bilateral cleft lip and palate:3
Effect of the quality of orthodontic finishing on the stability of anterior tooth alignment3
Changes in the condylar head after orthognathic surgery in Class III patients: a retrospective three-dimensional study3
Influence of personality traits on a patient's decision to accept orthognathic surgery for correction of dentofacial deformity3
Combined orthodontic and surgical open bite correction: Principles for success. Part 23
Comparison of two different therapeutic approaches for skeletal Class II patients with temporomandibular degenerative joint disease3
Does age influence deep overbite correction with Invisalign? A prospective study evaluating mandibular incisor intrusion in adolescents vs adults3
Use of a novel body mandibular plane (mental foramen–protuberance menti) in analyzing mandibular asymmetry compared with conventional border mandibular plane3
Does the rhythm and appliance type of rapid maxillary expansion have an effect on root resorption?3
Torque recovery of the maxillary incisors with a modified double J retractor in a Class II division 2 case treated with clear aligners3
A theoretical analysis of longitudinal temporomandibular joint compressive stresses and mandibular growth3
Root resorption during maxillary molar intrusion with clear aligners: a randomized controlled trial3
Twenty-year follow-up of functional treatment with a bionator appliance (part 2): a retrospective cephalometric analysis of skeletal and dentoskeletal changes3
The efficacy of chewing gum in the reduction of orthodontic pain at its peak intensity: a systematic review and meta-analysis3
Orthodontic treatment protocols in patients with alveolar clefting: a survey of ACPA–approved cleft teams in the United States3
Dental arch changes after anterior open bite treatment in the mixed dentition produced by miniscrew-supported palatal crib vs conventional fixed palatal crib:3
Root resorption in relation to a modified piezocision technique3
Prediction of maxillary canine impaction using eruption pathway and angular measurement on panoramic radiographs3
Comparison between orthodontic and surgical uprighting of mandibular molars: a systematic review3
In vitro enamel surface roughness analysis of 4 methods for removal of remaining orthodontic adhesive after bracket debonding3
Effect of piezocision-assisted lower second molar protraction on periodontal tissues, alveolar bone height, and lower second molar root resorption3
Accuracy of three-dimensional printed models derived from cone-beam computed tomography3
Influence of facial type on attractiveness of vertical canine position from the perspective of orthodontists and laypeople3
A coupled-lines system to determine the anteroposterior position of maxillary central incisors for smiling profile esthetics2
Efficacy of aloe vera and probiotic mouthwashes vs fluoride mouthwash onStreptococcus mutansin plaque around brackets of orthodontic patients: a randomized clinical trial2
Comparing patient-centered outcomes and efficiency of space closure between nickel-titanium closed-coil springs and elastomeric power chains during orthodontic treatment:2
Mandibular asymmetry types and differences in dental compensations of Class III patients analyzed with cone-beam computed tomography2
Finite element simulations of the effects of an extraoral device, RAMPA, on anterosuperior protraction of the maxilla and comparison with gHu-1 intraoral device2
Influence of second premolar extractions on the volume of the oral cavity proper: a control comparative cone-beam computed tomography volumetric analysis study2
Total arch extrusion with skeletal anchorage to improve inadequate maxillary incisor display in a case of vertical maxillary deficiency2
Improvement in the transverse dimension of dental arches in mixed dentition patients with posterior crossbite treated with functional therapy2
Super-elasticity in vitro assessment of CuNiTi wires according to their Austenite finish temperature and the imposed displacement2
Treatment of anterior open bite and an ankylosed incisor by applying multiloop edgewise archwire, mini-implants, and dentoalveolar distraction2
An evaluation of gingival phenotype and thickness as determined by indirect and direct methods2
Comparison of palatal volume and surface changes between bone-borne and tooth-tissue-borne maxillary expansion on cone beam computed tomography digital cast models2
Influence of rapid maxillary expansion on nocturnal enuresis in children:2
The Tip and Torque adjustable bracket as a new concept in design:2
An alternative treatment approach for patients with resistant otitis media with effusion and dysfunctional Eustachian tube:2
Comparison of the primary stability of orthodontic miniscrews after repeated insertion cycles:2
Airway changes in patients with unilateral cleft lip/palate (UCL/P) after maxillary advancement2
Comparison of periodontal status and failure rates with different retainer bonding methods and adhesives: a randomized clinical trial2
Detailed three-dimensional orthodontic tooth repositioning to improve restorative outcome:2
Comparison of abnormalities in the sequence of growth stages in the skeletal maturity index vs cervical vertebral maturation:2
Analysis of canine retraction and anchorage loss in different facial types with and without piezocision: a split-mouth–design, randomized clinical trial2
Bone thickness and height of the buccal shelf area and the mandibular canal position for miniscrew insertion in patients with different vertical facial patterns, age, and sex2
Effectiveness of metronidazole gel and mobile telephone short-message service reminders on gingivitis in orthodontic patients:2
Morphometric and volumetric analysis of the proximity between the incisive canal and maxillary central incisors during anterior retraction: a retrospective cone-beam computed tomography study2
Effects of orthodontic camouflage treatment vs orthodontic-orthognathic surgical treatment on condylar stability in Class II hyperdivergent patients with severe temporomandibular joint osteoarthrosis:2
Invisalign Lite: a cross-sectional investigation of orthodontist treatment-planning practices2
Short-term skeletal and dentoalveolar effects of overexpansion:2
Comparison of flash-free and conventional bonding systems: A systematic review and meta-analysis2
Evaluation of root resorption in the lower incisors after orthodontic treatment of skeletal Class III malocclusion by three-dimensional volumetric measurement with cone-beam computed tomography2
Comparison of three orthodontic bonding systems in white spot lesion development: a randomized clinical trial2
Cytotoxicity assessment of different clear aligner systems: An in vitro study2
0.13238286972046