Advances in Colloid and Interface Science

Papers
(The TQCC of Advances in Colloid and Interface Science is 35. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-11-01 to 2024-11-01.)
ArticleCitations
Synthesis of nanomaterials using various top-down and bottom-up approaches, influencing factors, advantages, and disadvantages: A review471
Application of bio-nanocomposite films and edible coatings for extending the shelf life of fresh fruits and vegetables222
Spinel ferrites (MFe2O4): Synthesis, improvement and catalytic application in environment and energy field211
Underground hydrogen storage: Influencing parameters and future outlook209
Metal-organic framework (MOF) composites as promising materials for energy storage applications206
Effect of synthetic surfactants on the environment and the potential for substitution by biosurfactants199
Emulsification and emulsion stability: The role of the interfacial properties189
Recent advances in chemical surface modification of metal oxide nanoparticles with silane coupling agents: A review178
Icephobic/anti-icing properties of superhydrophobic surfaces150
A state of the art review on the synthesis, antibacterial, antioxidant, antidiabetic and tissue regeneration activities of zinc oxide nanoparticles148
The emerging role of nanotechnology in skincare146
Zinc oxide nanoparticles: A comprehensive review on its synthesis, anticancer and drug delivery applications as well as health risks140
Polydopamine at biological interfaces134
Hydrodynamics and surface properties influence biofilm proliferation131
Antibacterial hydrogel coating: Strategies in surface chemistry130
Pore wettability for enhanced oil recovery, contaminant adsorption and oil/water separation: A review126
Strategies, advances, and challenges associated with the use of graphene-based nanocomposites for electrochemical biosensors123
What affects the biocompatibility of polymers?115
Multifunctional membranes with super-wetting characteristics for oil-water separation and removal of hazardous environmental pollutants from water: A review115
The impact of relative humidity on electrospun polymer fibers: From structural changes to fiber morphology114
Copper-based metal–organic frameworks for biomedical applications113
Multifunctional superhydrophobic surfaces111
Recent advances in active targeting of nanomaterials for anticancer drug delivery109
Janus membranes for membrane distillation: Recent advances and challenges108
Liposomes as biocompatible and smart delivery systems – the current state106
Comprehensive review on surfactant adsorption on mineral surfaces in chemical enhanced oil recovery102
Advances of 3D graphene and its composites in the field of microwave absorption101
State-of-the-art of 3D printing technology of alginate-based hydrogels—An emerging technique for industrial applications100
A review on the features, performance and potential applications of hydrogel-based wearable strain/pressure sensors100
Surface characterization of thin-film composite membranes using contact angle technique: Review of quantification strategies and applications98
Emulsion characterization via microfluidic devices: A review on interfacial tension and stability to coalescence98
Discussion on molecular dynamics (MD) simulations of the asphalt materials97
A review on clay wettability: From experimental investigations to molecular dynamics simulations97
Current advances in the classification, production, properties and applications of microbial biosurfactants – A critical review96
Strategies to prolong the residence time of drug delivery systems on ocular surface94
Froth flotation of fluorite: A review91
Polyimide based super-wettable membranes/materials for high performance oil/water mixture and emulsion separation: A review91
Semiconductor photocatalysts: A critical review highlighting the various strategies to boost the photocatalytic performances for diverse applications91
Transition metal selenides and diselenides: Hydrothermal fabrication, investigation of morphology, particle size and and their applications in photocatalyst90
Face masks against COVID-19: Standards, efficacy, testing and decontamination methods89
Recent advances on micellar catalysis in water88
Progress of polymer gels for conformance control in oilfield87
Enhanced oil recovery from fractured carbonate reservoirs using nanoparticles with low salinity water and surfactant: A review on experimental and simulation studies87
New insights into food hydrogels with reinforced mechanical properties: A review on innovative strategies87
A review of wettability alteration using surfactants in carbonate reservoirs86
Nanoparticles: From synthesis to applications and beyond86
Protein immobilization on graphene oxide or reduced graphene oxide surface and their applications: Influence over activity, structural and thermal stability of protein85
A critical review of synthesis procedures, applications and future potential of nanoemulsions83
Magnetic nanofluids (Ferrofluids): Recent advances, applications, challenges, and future directions83
Cationic gemini surfactant properties, its potential as a promising bioapplication candidate, and strategies for improving its biocompatibility: A review80
Application of surfactants as anticorrosive materials: A comprehensive review78
Emulsions containing essential oils, their components or volatile semiochemicals as promising tools for insect pest and pathogen management78
Temperature dependence of the contact angle of water: A review of research progress, theoretical understanding, and implications for boiling heat transfer75
A critical review on thermal conductivity enhancement of graphene-based nanofluids75
Incorporation of silver nanoparticles into active antimicrobial nanocomposites: Release behavior, analyzing techniques, applications and safety issues75
Hydroxyapatite with magnetic core: Synthesis methods, properties, adsorption and medical applications74
Droplet manipulation on superhydrophobic surfaces based on external stimulation: A review73
Emergence of sulfur quantum dots: Unfolding their synthesis, properties, and applications72
The challenge of lubricant-replenishment on lubricant-impregnated surfaces72
Multiscale combined techniques for evaluating emulsion stability: A critical review71
2D/2D Heterojunction systems for the removal of organic pollutants: A review71
Detection of food spoilage and adulteration by novel nanomaterial-based sensors71
Recent advances in superhydrophobic polyurethane: Preparations and applications71
Nanomaterial based PVA nanocomposite hydrogels for biomedical sensing: Advances toward designing the ideal flexible/wearable nanoprobes71
A review on super-wettable porous membranes and materials based on bio-polymeric chitosan for oil-water separation71
Dissipative particle dynamics simulations in colloid and Interface science: a review69
A review on recent developments in electrochemical hydrogen peroxide synthesis with a critical assessment of perspectives and strategies69
Engineering of g-C3N4-based photocatalysts to enhance hydrogen evolution68
Core-shell microparticles: From rational engineering to diverse applications68
Therapeutic oxygen delivery by perfluorocarbon-based colloids68
Capillary imbibition and flow of wetting liquid in irregular capillaries: A 100-year review67
From platinum atoms in molecules to colloidal nanoparticles: A review on reduction, nucleation and growth mechanisms67
Photothermal conversion and transfer in photothermal therapy: From macroscale to nanoscale67
Titanium dioxide nanoparticles as multifunctional surface-active materials for smart/active nanocomposite packaging films67
Advances of microemulsion and its applications for improved oil recovery66
Bio-nanocomposites of graphene with biopolymers; fabrication, properties, and applications66
Recent progress on Pickering emulsions stabilized by polysaccharides-based micro/nanoparticles65
Recent developments in industrial applications of nanoemulsions65
Reviewing nanoplastic toxicology: It's an interface problem65
Recent advancements in 3D bioprinting technology of carboxymethyl cellulose-based hydrogels: Utilization in tissue engineering64
Contact angle measurements: From existing methods to an open-source tool64
Nanoprecipitation as a simple and straightforward process to create complex polymeric colloidal morphologies64
3D and 4D printing: From innovation to evolution63
Toward molecular characterization of asphaltene from different origins under different conditions by means of FT-IR spectroscopy63
Natural and engineered clays and clay minerals for the removal of poly- and perfluoroalkyl substances from water: State-of-the-art and future perspectives63
Alginate-based nanocarriers for the delivery and controlled-release of bioactive compounds63
Metal and metal oxide-based antiviral nanoparticles: Properties, mechanisms of action, and applications62
Hydrophilicity and hydrophobicity consideration of organic surfactant compounds: Effect of alkyl chain length on corrosion protection62
Defect engineering in polymeric carbon nitride photocatalyst: Synthesis, properties and characterizations62
Curcumin encapsulation in functional PLGA nanoparticles: A promising strategy for cancer therapies61
Biochars and activated carbons as adsorbents of inorganic and organic compounds from multicomponent systems – A review61
Hydrogel beads-based nanocomposites in novel drug delivery platforms: Recent trends and developments61
Targeted delivery and controlled released of essential oils using nanoencapsulation: A review59
Bitumen and asphalt concrete modified by nanometer-sized particles: Basic concepts, the state of the art and future perspectives of the nanoscale approach59
Microgels at interfaces, from mickering emulsions to flat interfaces and back59
Layered double hydroxides for removing and recovering phosphate: Recent advances and future directions59
Surface interaction mechanisms in mineral flotation: Fundamentals, measurements, and perspectives58
Development of molecularly imprinted polymer based phase boundaries for sensors design (review)57
Stimulus-responsive luminescent hydrogels: Design and applications56
Recent advances in tailoring and improving the properties of polyimide aerogels and their application56
Interactions of the molecular assembly of polysaccharide-protein systems as encapsulation materials. A review56
Biowaste- and nature-derived (nano)materials: Biosynthesis, stability and environmental applications56
Graphene-based materials for adsorptive removal of pollutants from water and underlying interaction mechanism55
Morphology control through the synthesis of metal-organic frameworks54
Recent progress on research of molybdenite flotation: A review54
Thermoresponsive interfaces obtained using poly(N-isopropylacrylamide)-based copolymer for bioseparation and tissue engineering applications53
One–dimensional metal–organic frameworks for electrochemical applications53
Fitting pieces into the puzzle: The impact of titanium-based dental implant surface modifications on bacterial accumulation and polymicrobial infections53
Biopolymer-based nanocarriers for sustained release of agrochemicals: A review on materials and social science perspectives for a sustainable future of agri- and horticulture52
Fluorinated surfactants: A review on recent progress on synthesis and oilfield applications52
Encapsulation of multiple probiotics, synbiotics, or nutrabiotics for improved health effects: A review52
Correlation between interfacial layer properties and physical stability of food emulsions: current trends, challenges, strategies, and further perspectives52
Recent advances for understanding the role of nanobubbles in particles flotation51
Encapsulation of volatile compounds in liquid media: Fragrances, flavors, and essential oils in commercial formulations51
Electrochemical biosensors based on polymer nanocomposites for detecting breast cancer: Recent progress and future prospects51
Layered double hydroxides are still out in the bloom: Syntheses, applications and advantages of three-dimensional flower-like structures50
Recent advances of bio-inspired anti-icing surfaces50
Green surfactants for corrosion control: Design, performance and applications50
Pickering foams and parameters influencing their characteristics50
Advances in the therapeutic delivery and applications of functionalized Pluronics: A critical review49
Stability and release mechanisms of double emulsions loaded with bioactive compounds; a critical review49
Ionic liquid-based antimicrobial materials for water treatment, air filtration, food packaging and anticorrosion coatings48
The pH dependent surface charging and points of zero charge. IX. Update48
Current progress and prospects of organic nanoparticles against bacterial biofilm48
Fabrication of air filters with advanced filtration performance for removal of viral aerosols and control the spread of COVID-1948
Biosensing platform on ferrite magnetic nanoparticles: Synthesis, functionalization, mechanism and applications47
CO2 hydrogenation over functional nanoporous polymers and metal-organic frameworks46
Hydroxyapatite-based composites: Excellent materials for environmental remediation and biomedical applications46
Applications of serum albumins in delivery systems: Differences in interfacial behaviour and interacting abilities with polysaccharides46
Fog collection behavior of bionic surface and large fog collector: A review45
State-of-the-art progresses for Ti3C2Tx MXene reinforced polymer composites in corrosion and tribology aspects45
Dropwise condensation: From fundamentals of wetting, nucleation, and droplet mobility to performance improvement by advanced functional surfaces45
Smart surfaces with reversibly switchable wettability: Concepts, synthesis and applications44
Review on the advancements of magnetic gels: towards multifunctional magnetic liposome-hydrogel composites for biomedical applications44
Sawdust, a versatile, inexpensive, readily available bio-waste: From mother earth to valuable materials for sustainable remediation technologies44
Carbon-based aerogels for biomedical sensing: Advances toward designing the ideal sensor44
Biocatalytic self-assembled synthetic vesicles and coacervates: From single compartment to artificial cells44
Heads or tails? The synthesis, self-assembly, properties and uses of betaine and betaine-like surfactants43
Recent advances in understanding and design of efficient hydrogen evolution electrocatalysts for water splitting: A comprehensive review42
Electrospraying as a novel process for the synthesis of particles/nanoparticles loaded with poorly water-soluble bioactive molecules42
Overview of the development of slippery surfaces: Lubricants from presence to absence42
Rising of MXenes: Novel 2D-functionalized nanomaterials as a new milestone in corrosion science - a critical review42
State-of-the-art advances in nanocomposite and bio-nanocomposite polymeric materials: A comprehensive review42
Stimuli-bioresponsive hydrogels as new generation materials for implantable, wearable, and disposable biosensors for medical diagnostics: Principles, opportunities, and challenges42
Covalent functionalization of MXenes for tribological purposes - a critical review41
Photocatalytic nanoparticles – From membrane interactions to antimicrobial and antiviral effects41
Roadmap for 2D materials in biotribological/biomedical applications – A review41
Particle-stabilized oil foams41
Advances in fluorescence sensing enabled by lanthanide-doped upconversion nanophosphors41
Effect of selected monovalent salts on surfactant stabilized foams40
Recent advances in carbon nanotubes-based biocatalysts and their applications39
Fundamental aspects of nanocellulose stabilized Pickering emulsions and foams39
Review of droplet dynamics and dropwise condensation enhancement: Theory, experiments and applications39
Insights into colloidal nanoparticle-protein corona interactions for nanomedicine applications39
Surface science of cosmetic substrates, cleansing actives and formulations39
Cetyltrimethylammonium bromide in the synthesis of mesoporous silica nanoparticles: General aspects and in vitro toxicity38
A review on synthesis, modification method, and challenges of light-driven H2 evolution using g-C3N4-based photocatalyst38
Biomolecule-mediated chiral nanostructures: a review of chiral mechanism and application38
Robust nanocarriers to engineer nanobiocatalysts for bioprocessing applications38
Recent progress on plant extract-mediated biosynthesis of ZnO-based nanocatalysts for environmental remediation: Challenges and future outlooks38
Recent advances and challenges in 2D/2D heterojunction photocatalysts for solar fuels applications38
A new trend of using poly(vinyl alcohol) in 3D and 4D printing technologies: Process and applications38
Assembled milk protein nano-architectures as potential nanovehicles for nutraceuticals37
A broad perspective to particle-laden fluid interfaces systems: from chemically homogeneous particles to active colloids37
Thermal and rheological properties of magnetic nanofluids: Recent advances and future directions37
Cyclodextrin/surfactant inclusion complexes: An integrated view of their thermodynamic and structural properties37
Hyperbranched polymers as superior adsorbent for the treatment of dyes in water37
Advanced liposome and polymersome-based drug delivery systems: Considerations for physicochemical properties, targeting strategies and stimuli-sensitive approaches37
Bio-nanocomposites as food packaging materials; the main production techniques and analytical parameters37
Recent advances in dopamine-based materials constructed via one-pot co-assembly strategy37
Investigation of ion-exchange membranes by means of chronopotentiometry: A comprehensive review on this highly informative and multipurpose technique37
Magnetic nanocomposites for biomedical applications36
Applying droplets and films in evaporative lithography36
Bioinspired organohydrogels with heterostructures: Fabrications, performances, and applications36
Green fluorescent protein inspired fluorophores36
Sunflower protein isolates-composition, extraction and functional properties35
Artifacts and misinterpretations in gas physisorption measurements and characterization of porous solids35
Data evaluation for surface-sensitive label-free methods to obtain real-time kinetic and structural information of thin films: A practical review with related software packages35
Iron oxides/graphene hybrid structures – Preparation, modification, and application as fillers of polymer composites35
Sophorolipids: A comprehensive review on properties and applications35
Graphene aerogels via hydrothermal gelation of graphene oxide colloids: Fine-tuning of its porous and chemical properties and catalytic applications35
0.054846048355103