Acta Mechanica

Papers
(The TQCC of Acta Mechanica is 4. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-03-01 to 2025-03-01.)
ArticleCitations
Carrera unified formulation (CUF) for the shells of revolution. II. Navier close form solutions147
Investigation of the static behavior of a micropolar functionally graded plate using two finite element methods in Hilbert space and differential transformation method48
Magnetic-thermoelastic coupling resonance and bifurcation behavior of a rotating functionally graded cylindrical shell induced by armature47
Transient thermoelastic responses of dielectrics subjected to ultrashort shaped pulses45
Effect of thermal fluctuations on the average shape of a graphene nanosheet suspended in a shear flow41
Mechanics of SH and anti-plane SH waves in orthotropic piezoelectric quasicrystal with multiple surface effect41
Review on interpretations, applications, and developments of numerical methods in studying interface fracture38
Thanks to our reviewers33
Resonance frequencies of functionally graded nanocantilevers subjected to nonlinear spring constraint and attached nanoparticle32
Interactions due to Hall current and photothermal effect in a magneto-thermoelastic medium with diffusion and gravity32
Numerical algorithm for quaternion integration based on three independent parameters with no need for re-normalization31
Analytical free vibration solution of orthotropic thin plates with three edges rotationally restrained and one edge free30
Dynamic analysis of laminated composite double cylindrical and conical shells with bulkheads using meshfree method29
Growth of a semi-infinite inclusion in an elastic wave metamaterial with local resonators28
Vibration suppression and stability analysis of a beam at large amplitude excitation using a two-degree-of-freedom nonlinear energy sink25
On the use of Clifford algebra $$C\ell _3({\mathbb {C}})$$ with continuous media, for applications to multiphysical circuits25
Nonlinear damping and forced vibration investigation of three-layered viscoelastic sandwich beams on nonlinear elastic foundation with interlaminar continuous shear stress Zig–Zag theories25
Static behavior of FG sandwich beams under various boundary conditions using trigonometric series solutions and refined hyperbolic theory24
Multimodal frequency and phase velocity spectrum of shear wave in microstructural flexomagnetic plate loaded with complex fluid23
Refined plate elements for the analysis of composite plate using Carrera unified formulation23
Computational deep learning algorithm (vision/frequency response)-based damage detection in engineering structure22
Finite element modeling and analysis of piezoelectric nanoporous metal foam nanobeam under hygro and nonlinear thermal field22
Flexural–torsional vibration of thin-walled beams with open cross sections considering the additional torsional moment22
Numerical simulation of droplet evaporation in three-component multiphase flows using lattice Boltzmann method21
Nonlinear analysis of laminated FG-GPLRC beams resting on an elastic foundation based on the two-phase stress-driven nonlocal model21
Correction to: A novel modified nonlocal strain gradient theory for comprehensive analysis of functionally graded nanoplates20
An evaluation of SH and anti-plane SH wave signals for nanosensor applications using two distinct models of piezoelectric materials lead zirconate titanate (PZT-2) and PZT-5H20
Surface waves propagating in an elastic half-space considering both the effects of strain gradient and surface elasticity19
Stability analysis of a sandwich composite magnetostrictive nanoplate coupled with FG porous facesheets19
Vibrations of nonlocal poro-thermoelastic plates of irregular boundaries19
Three-phase-lag thermoelastic damping analysis of graphene-reinforced laminated composite microplate resonators based on modified strain gradient theory19
A numerical study on non-spherical droplet impact with solidification in additive manufacturing19
Generalized thermoelastic damping model for small-scale beams with circular cross section in the framework of nonlocal dual-phase-lag heat equation19
Theoretical study on the instability mechanism of flutter generated on a cantilevered flexible plate in three-dimensional uniform flow18
Correction: The meshless local Petrov–Galerkin cumulant lattice Boltzmann method: strengths and weaknesses in aeroacoustic analysis18
Meta-material beams with magnetostrictive coatings: vibrational characteristics18
A mapping from Schrodinger equation to Navier–Stokes equations through the product-like fractal geometry, fractal time derivative operator and variable thermal conductivity18
Analytical approach to energy harvesting of functionally graded higher-order beams with proof mass17
Adaptive convexification of microsphere-based incremental damage for stress and strain softening at finite strains17
Structure carrying moving subsystems with distributed viscoelastic coupling: part II - parametric resonance and stability17
Vibration analysis of partially viscoelastic connected double-beam system with variable cross section17
Reddy’s third-order shear deformation shell theory for free vibration analysis of rotating stiffened advanced nanocomposite toroidal shell segments in thermal environments17
Size-dependent postbuckling for microbeams: analytical solutions using a reformulated strain gradient elasticity theory16
An analytical multiscale modeling of a nanocomposite anode with graphene nanosheets for lithium-ion battery16
Optimal resistive shunted damping configurations for multi-modal noise reduction in sandwich panels16
A mechanical ramp type of electron–hole semiconducting model with laser pulses and variable thermal conductivity16
Thermomechanical interactions of rotating thermoelastic magneto-microelongated medium heated by laser and initially stressed via non-local elasticity and GN III16
Discussion of “The general basis-free spin and its concise proof” by Meng and Chen, Acta Mech., https://doi.org/10.1007/s00707-022-03162-216
The reflection of a three-dimensional plane wave by the stress-free and rigid boundary of a functionally graded triclinic medium15
Guided waves in anisotropic layers: the low-frequency limits15
Fracture mechanics of an arbitrary position crack emanating from a nano-hole in one-dimensional hexagonal piezoelectric quasicrystals15
Probabilistic solution for an MDOF hysteretic degrading system to modulated non-stationary excitations15
Fractionalization of anti-Zener and Zener models via rheological analogy15
Phase field modeling of topological magnetic structures in ferromagnetic materials: domain wall, vortex, and skyrmion15
Dynamic analysis of interfacial multiple cracks in piezoelectric thin film/substrate15
The Kelvin–Voigt visco-elastic model involving a fractional-order time derivative for modelling torsional oscillations of a complex discrete biodynamical system14
Representative volume element model of triply periodic minimal surfaces (TPMS)-based electrostrictive composites for numerical evaluation of effective properties14
Static analysis of functionally graded plate structures resting on variable elastic foundation under various boundary conditions14
Deformation of planar ring mesh under static in-plane tensile loads14
Non-conforming Trefftz finite element implementation of orthotropic Kirchhoff plate model based on consistent couple stress theory14
Describing function method with pointwise balancing in time domain for periodic responses of non-smooth self-excited system13
Correction to: Constitutive modeling of brittle–ductile transition in porous rocks: formulation, identification and simulation13
A novel periodic beam with multilayer acoustic black holes for deep sub-wavelength vibration attenuation13
A mathematically rigorous proof on the decoupling of the plate and disc problem13
Data generation framework for inverse modeling of nonlinear systems in structural dynamics applications13
A helical actuator driven by biased SMA: design, model, and experiment13
Multiscale modeling of CNT-based nanocomposites with soft/hard interphase effects13
Shock wave diffraction in micro-shock tubes with sudden expansion13
Dual-solver research based on the coupling of flux reconstruction and finite volume methods13
Numerical investigation of aerothermoelastic characteristics of a thin heated panel in high supersonic and hypersonic flow13
AI-aided exploration of lunar arch forms under in-plane seismic loading13
A semi-analytical method for computing dispersion curves of propagating waves underground12
Finite element analysis of compressible transversely isotropic hyperelastic shells12
Dual photo- and magneto-responses of layered beams composed of liquid crystal elastomers and magnetic responsive elastomers12
Study on the rectangular bistable composite laminated plate through dynamic modeling, numerical simulation and experiment12
A new continuum model of a class of elastic metamaterials with local rotational effects12
An efficient interval moment method for uncertainty propagation analysis with non-parameterized probability-box12
Submodels of the model of dynamic deformation of a transversally isotropic thermoelastic medium for solving the problems of horizontal crack formation at 3D printing12
Equivalent mechanical modeling and dynamic analysis of a large annular tensegrity structure12
Thermal stress intensity factor of an edge interface crack under arbitrary material combination considering double singular stress fields before and after cracking12
Transport of a driven spheroid in a uniform flow at low Reynolds numbers12
On the vibration and buckling behaviors of porous FG beams resting on variable elastic foundation utilizing higher-order shear deformation theory12
Finite element implementation of a certain class of elasto-viscoplastic constitutive models12
Characterization of the dynamic behavior of structures using the Kriging surrogate and experimental data11
Performance of passive scalar method in heat transfer simulation of a two-dimensional droplet focusing on the parasitic temperatures11
Wave propagation in nonlocal transversely isotropic diffusive materials11
An improved line contact model for elastic–plastic rough surfaces11
An efficient nine-node quadrilateral element for free vibration analysis of deep doubly curved soft-core sandwich shells11
On vibration and passive control of axially translating string with damping at both ends using reflected traveling wave superposition method11
Nonlinear active control of thermally induced pyro-coupled vibrations in porous-agglomerated CNT core sandwich plate with magneto-piezo-elastic facings11
Effect of foam structure on thermo-mechanical buckling of foam core sandwich nanoplates with layered face plates made of functionally graded material (FGM)11
Author’s response to “Discussion on the paper by Schoeftner, J., “A verified analytical sandwich beam model for soft and hard cores: comparison to existing analytical models and finite element calcula11
Dynamic stability of smart sandwich nanotubes based on modified couple stress theory using differential quadrature method (DQM)11
Wave characteristics in magneto-electro-elastic laminated composites with different layering directions11
Finite strip progressive damage analysis of relatively thick imperfect laminates under end-shortening strain11
Propagation characteristics of Love waves in a layered piezomagnetic structure11
Nonlinear thermal postbuckling of functionally graded graphene-reinforced composite laminated plates with circular or elliptical delamination11
Continuous contact problem of interaction between two arbitrarily positioned flat stamps on the thermoelectric material11
Analysis of Navier–Stokes equations by a BC/GE embedded local meshless method11
A multi-scale constitutive model for analyzing the tensile deformation of eutectic high-entropy alloys10
SEM: a shallow energy method for finite deformation hyperelasticity problems10
Experimental and numerical investigation of the flow in a cylindrical cavity with an unsteady rotating lid10
Establishing a quantitative relationship between strain gradient and hetero-deformation-induced stress in gradient-structured metals10
Time-domain spectral finite element based on third-order theory for efficient modelling of guided wave propagation in beams and panels10
Length scale effect on the buckling behavior of a graphene sheets using modified couple stress theory and molecular dynamics method10
Dynamic stress concentration of a smooth moving punch influenced by a shear wave in an initially stressed dry sandy layer10
Dynamic stability analysis of Mindlin viscoelastic plates subjected to constant and harmonic in-plane compressions based on free vibration analysis of elastic plates10
Mechanics of delaminated composite beams subjected to retarded follower force with multiple time delay10
Dynamic analysis of functionally graded sandwich shells resting on elastic foundations10
Scattering of plane waves from an interface crack between the 1D hexagonal quasicrystals coating and the elastic substrate10
Modeling of magnetorheolological gels: a study on the particle size effect10
Impact of fibers on pumping flow: an analysis by CFD-DEM simulations and experiments10
Modeling the oxidation of a polymer-derived ceramic with chemo-mechanical coupling and large deformations10
On the use of feed-forward neural networks in the context of surrogate aeroelastic simulations10
Critical velocities of anisotropic tubes under a moving pressure incorporating transverse shear and rotary inertia effects9
Collective transport of ions through carbon nanotubes under alternating electric field9
Parameter estimation and its influence on layered metal–composite–metal plates simulation9
Study on the dynamics, relative equilibria, and stability for liquid-filled spacecraft with flexible appendage9
Nonlinear planar vibrations of a cable with a linear damper9
Improved element solution to composite beams9
New analytic thermal buckling solutions of non-Lévy-type functionally graded rectangular plates by the symplectic superposition method9
Nonlinear bending of FG skew sandwich plates with temperature-dependent elastoplastic properties using an enhanced 3D meshless approach9
High-order lubrication theory in channels and tubes with variable geometry9
In-plane instability of shallow layered arches with interlayer slip9
Uncertainty quantification via λ-Neumann methodology of the stochastic bending problem of the Levinson–Bickford beam9
Geometrically nonlinear analysis and vibration of in-plane-loaded variable angle tow composite plates and shells9
Effect of wall blowing/suction on roughness-induced transition in high-speed boundary layers9
Relativistic formulation of noncentral curl force and relativistic Emden–Fowler type equations9
Nonlocal fractal neutrons transport equation and its implications in nuclear engineering9
Strain gradient elasticity theory of polymer networks9
Nonlinear vibration response of a functionally graded carbon nanotube-reinforced composite conical shell using a stress function method9
A new model for thermal buckling of an anisotropic elastic composite beam incorporating piezoelectric, flexoelectric and semiconducting effects9
Intense cross-scale energy cascades resembling “mechanical turbulence” in harmonically driven strongly nonlinear hierarchical chains of oscillators9
Size-dependent nonlinear vibration of functionally graded composite micro-beams reinforced by carbon nanotubes with piezoelectric layers in thermal environments9
The effect of bandwidth on the noise-induced chaos of shape memory alloy webs under mixed transverse and parametric excitations: an analytic approach8
Modeling of programmable low-frequency isolator with quasi-zero stiffness metamaterials8
Experimental and numerical investigations on uniaxial-stress ductility failure of additive manufactured lattice structures based on frequency fatigue technique8
Optimal control of the Cattaneo–Hristov heat diffusion model8
Study of an interfacial semi-infinite crack in a composite structure8
A screw dislocation interacting with a cycloid rough surface8
On the coupled linear theory of thermoviscoelasticity of porous materials8
Correction to: Thermo-magnetic interaction in a viscoelastic micropolar medium by considering a higher-order two phase-delay thermoelastic model8
Symmetries and perturbations of a singular nonconservative system on time scales8
Effect of the porous structure on the hygrothermal vibration analysis of functional graded nanoplates using nonlocal high-order continuum plate model8
Investigation of turbulent multiphase swirling jets8
Force-chemical coupling analysis of nanocomposite anode during charging and discharging process8
Smooth hyperelastic potentials for 1D problems of bimodular materials8
Reflection and transmission of elastic waves through a sandwich structure with the microstructural effects and Lorentz force considered8
Transient dynamics of an anisotropic plate on an elastic-inertial foundation with local supports8
Pairwise interaction of in-line spheroids settling in a linearly stratified fluid8
Incorporating grain-scale processes in macroscopic sediment transport models8
Electro-elastic field of a piezoelectric quasicrystal medium containing two cylindrical inclusions8
Editorial to special issue “Recent mechanics-based developments in structural dynamics and earthquake engineering”8
Magneto–thermoelastic behavior of an orthotropic hollow cylinder based on Lord–Shulman and Green–Lindsay theories8
A mode-III fracture analysis of two collinear cracks in a functionally graded material using gradient elasticity theory8
A novel semi-implicit scheme for elastodynamics and wave propagation in nearly and truly incompressible solids8
Piezo-viscous-polar lubrication of hybrid journal bearing under misaligned operation8
Nonlinear forced vibration and detached resonance curves of axially moving functionally graded carbon nanotube reinforced composite plates8
Free vibration characteristics of stiffened sandwich plates with auxetic core and functionally graded piezoelectric face sheet8
Nonlinear deformation for thermo–magneto–electro–elastic (TMEE) laminates8
Fundamental equations of contact mechanics for fractal solid surfaces8
Isogeometric homogenization of unidirectional nanocomposites with energetic surfaces8
Advancements in Continuum Mechanics and Electrodynamics by a spacetime geometric approach8
Electrostatic charge distribution in armchair and zigzag carbon nanotubes: a numerical comparison of CNT charge models8
Bending analysis of a porous functionally graded sandwich plate with a hole resting on an elastic foundation8
Transient behavior and steady-state rheology of dense frictional suspensions in pressure-driven channel flow8
Addressing manufacturing defects in architected materials via anisotropy: minimal viable case8
Tribological characteristics of three-body abrasive wear on MoS2 films8
The free and forced vibration behavior analysis of multi-stepped FGP-GPLRC curved beam with general boundary conditions8
Crack growth optimization using eddy current testing and genetic algorithm for estimating the stress intensity factors8
Thrust in a symmetric masonry arch with frictional joints on spreading supports8
Stress function and its finite element implementation for elastostatic plain strain orthotropic problems of modified couple stress theory8
Size-dependent thermal-electro-mechanical behaviors of a piezo-flexoelectric micro-beam based on nonlocal strain gradient theory and dual-phase-lagging heat model8
Effects of concentration-dependent modulus and external loads on Li-ion diffusion and stress distribution in a bilayer electrode7
On the localised buckling of drillstrings in curved boreholes7
Effective magneto-electro-elastic moduli for multiferroic nanofibrous composites with imperfect interface7
Dynamic characteristic analysis of the inerter-based piecewise vibration isolator under base excitation7
Nonlinear size-dependent metamaterial-based tunable sandwich microbeams with enhanced vibration characteristics7
Thickness size effect on contact behavior of a thermoelectric strip7
Photothermal interactions in a semiconducting rotating plate with voids and temperature-dependent properties under dual phase lag model7
General nonlocal Kelvin–Voigt viscoelasticity: application to wave propagation in viscoelastic media7
An approximate model to describe the size effects of spherical contact tests, based on a modified couple stress elasticity7
Dynamic behaviour of bidirectional functionally graded sandwich beams under a moving mass with partial foundation supporting effect7
On finite element implementation of cyclic elastoplasticity: theory, coding, and exemplary problems7
Electromechanical field analysis of PN junctions in bent composite piezoelectric semiconductor beams under shear forces7
Modified solution of an interface rigid line between two bonded half-planes under remote in-plane heat flux7
Size-dependent effect of the flexoelectronics in a composite beam7
Extending the CFD-DEM coupling algorithm to accurately predict the particle separation in a two-phase air–solid particle flow through an aerofall AG mill7
Dynamic response of a piezoelectric quasicrystal rod with the generalized thermoelasticity7
Dynamic modeling and resonant analysis of rotating internally connected laminated piezoelectric beams7
Analysis of a thermopiezoelectric isotropic problem with Green and Laws model7
Polarization in graphene nanoribbons with inherent defects using first-principles calculations7
Ensemble of physics-informed neural networks for solving plane elasticity problems with examples7
Optimization of cantilever beams with multiple flexoelectric actuators based on Newton–Raphson iteration7
Stability of plane Poiseuille and Couette flows of Navier–Stokes–Voigt fluid7
Complete inequivalence of nonholonomic and vakonomic mechanics7
Incubation-time-based modeling of the grain-size-influenced yield point phenomenon7
Seismic optimal design of hysteretic damping tuned mass damper (HD-TMD) for acceleration response control7
An improved incompressible SPH with unified semi-analytical wall boundary conditions for free surface flow7
A generalized supercell model of defect-introduced phononic crystal microplates7
Microbiology-inspired nonlinear variable-order fractional model for amorphous glassy polymer7
A nonlinear electromechanical model for partially debonded thin-sheet piezoelectric actuators7
Suspension bridge with internal damping7
New closed-form solutions for flexural vibration and eigen-buckling of nanoplates based on the nonlocal theory of elasticity7
Bending and free vibration of piezomagnetic Timoshenko beams with the flexomagnetic and surface effects7
Hierarchic sets of shape functions constructed from enriched Fourier series7
An efficient reliability method for composite laminates with high-dimensional uncertainty variables7
Predictive modeling of nonlinear system responses using the Residual Improvement Deep Learning Algorithm (RIDLA)7
Two-dimensional heat transfer and thermoelastic analysis of temperature-dependent layered beams with nonuniform thermal boundary conditions7
Simulation of ductile fracture of zirconium alloys based on triaxiality dependent cohesive zone model7
Active vibration control method of a novel on-orbit assembled large-scale two-dimensional planar phased array antenna7
Buckling, post-buckling and geometrically nonlinear analysis of thin-walled beams using a hypothetical layered composite cross-sectional model7
Nonlinear low-velocity impact response of magneto-electro-elastic beams with initial geometric imperfection7
Thermal vibration and buckling analysis of magneto-electro-elastic functionally graded porous higher-order nanobeams using nonlocal strain gradient theory7
Explicit analysis of large transformation of a Timoshenko beam: post-buckling solution, bifurcation, and catastrophes7
Design and characteristic analysis of an X-shaped negative stiffness structure6
Exact solution of driving displacement for a partial PMP composite actuator and structural optimization6
Thermal characteristics of a multilayered annular disk with thermosensitive features using a fractional-order heat conduction model6
Vibration control of conical shell with multi-flexoelectric actuation6
Scattering of shear horizontal waves by the piezomagnetic material cylinder embedded in an elastic medium6
Nonlinear dynamic analysis of the perovskite solar cell under blast impacts based on the modified strain gradient theory6
On the buckling of meta-graphene-origami-enabled magnetostrictive nanoplates under temperature gradient6
Graphene nanoplates bending under multipart asymmetric conditions based on 3D elasticity and new modified couple stress theories: comparison with the molecular mechanics method6
Layer-wise dynamic analysis of a beam with global and local viscoelastic contributions using an FE/Laplace transform approach6
Nonlinear analysis of sandwich plate with FG porous core and RD-CNTCFRC face sheets under transverse patch loading6
Numerical study of steam flow on the low-pressure turbine under off-design conditions: a case study of the Neka steam power plant6
Analysis on scattering characteristics of SH guided wave due to V-notch in a piezoelectric/piezomagnetic bi-material strip6
On the dynamic behavior interpretation of sandwich beams with axially graded face sheets and magnetorheological core using modal strain energy approach6
Correction to: A directional-dependent localized mass-field damage model for anisotropic brittle fracture6
Correction: Surface waves propagating in an elastic half-space considering both the effects of strain gradient and surface elasticity6
Micromechanical simulation of thermal expansion, elastic stiffness and piezoelectric constants of graphene/unidirectional BaTiO3 fiber reinforced epoxy hybrid nanocomposites6
Bending analysis of graphene platelet-reinforced FG plates on Kerr foundations using an integral HSDT6
Wave propagation characteristics and energy harvesting of magnetically tunable defective phononic crystal microbeams6
A study of thermoelastic interactions in thin and long radiating rods under Moore–Gibson–Thompson theory of thermoelasticity6
Thanks to our reviewers6
Effects of the nanofiller addition on the band gap and complex dispersion curve of phononic crystals6
A simple analytical model for static and dynamic analysis of unsymmetrical bi-stable variable stiffness composite laminated plates6
Effect of inclined load on a functionally graded fiber-reinforced thermoelastic medium with temperature-dependent properties6
Vibration and dynamic instability analyses of functionally graded porous doubly curved panels with piezoelectric layers in supersonic airflow6
The effects of turbulence modeling on dynamic stall6
SH surface waves in piezoelectric semiconductors loaded with a finite viscous liquid layer6
Analytical solutions for the vibration response of thin-walled beams under bidirectional moving random loads6
Mathematical analysis of Holden’s polylinks6
Free vibration analysis of saturated porous circular micro-plates integrated with piezoelectric layers; differential transform method6
Canonical equations for generalized Chaplygin systems and Herglotz-type Noether theorems6
Reflection of plane waves in a microelongated thermoelastic porous medium with Hall current under modified Green–Lindsay model6
Effect of the elastic coefficient heterogeneity and crystallography on the grain growth stagnation6
Carrera unified formulation (CUF) for shells of revolution. I. Higher-order theory6
Fractal dimensions in fluid dynamics and their effects on the Rayleigh problem, the Burger's Vortex and the Kelvin–Helmholtz instability6
Non-local finite element formulation for stability analysis of thin-walled nanobeams with varying I-section6
0.069183111190796