Materials Science, Multidisciplinary: Latest Papers

9

Jan

2026

Synthesis of magnetic Fe3O4@ZIF-67 nanocomposite for sustainable removal of malachite green from water

Journal of Nanoparticle Research

9

Jan

2026

Brij–folic acid functionalized SPION nanocarriers with magnetic and pH-responsive properties for targeted delivery of poorly soluble anticancer drugs

Journal of Nanoparticle Research

9

Jan

2026

DoE-driven development, characterisation, in-silico ADME, and evaluation of surface functionalized SPIONs for enhanced blood–brain barrier permeabilit

Journal of Nanoparticle Research

9

Jan

2026

Release kinetics and cancer cell cytotoxicity of quercetin from polymer coated deformable lipid-based nanocarriers

Journal of Nanoparticle Research

9

Jan

2026

Strain-tunable photovoltaic properties of non-metal-doped PtS2 under biaxial deformation

Journal of Nanoparticle Research

9

Jan

2026

Broadband surface plasmon resonance tuning in ballistic aggregates of metal nanoparticles for photonic applications

Journal of Nanoparticle Research

9

Jan

2026

Dual-function antimicrobial and SERS-active colloidal silver nanoparticle platform for the detection of opportunistic pathogens assisted by machine le

Journal of Nanoparticle Research

9

Jan

2026

Adaptive per-hydroxy pillar[5]arene-based frameworks for selective CO2 adsorption under humid conditions Gold Open Access

Microporous and Mesoporous Materials

9

Jan

2026

A multi-scale analysis of CO2 adsorption in zeolite 13X

Microporous and Mesoporous Materials

9

Jan

2026

Framework–OSDA Interactions and Charge Compensation in Pure Silica MFI Zeolites Revealed by Solid-State NMR

Microporous and Mesoporous Materials

9

Jan

2026

Ionic Conductivity Detection as a Water-Insensitive Alternative for NH3-TPD Acidity Measurements in Zeolites.

Microporous and Mesoporous Materials

9

Jan

2026

Hydrotalcite-zeolite composites as precursors for catalysis: Synthesis, transformation and structural stability Gold Open Access

Microporous and Mesoporous Materials

9

Jan

2026

Competitive adsorption and diffusion of CO2/N2 in M-ZSM-5 for post-combustion capture: A molecular simulation insight

Microporous and Mesoporous Materials

9

Jan

2026

Enhanced olefin isomerization over CoMo/ZSM-23-γ-Al₂O₃ composite catalyst in hydrotreating of FCC naphtha

Journal of Porous Materials

9

Jan

2026

Multifunctional elliptical magnetic nanocarriers for dual-responsive targeted antitumor therapy

Journal of Porous Materials

9

Jan

2026

A review on g-C3N4-based nanophotocatalysts modified via plasma technology: Influences on surface properties and photocatalytic performance

Materials Science in Semiconductor Processing

9

Jan

2026

Investigation on electrical and optoelectronic properties of In4Se3 Nanosheet-Si mixed-dimensional heterojunction devices

Materials Science in Semiconductor Processing

9

Jan

2026

Fabrication of novel goethite analogues photocatalyst with enriched oxygen vacancies and Fe2+/Fe3+ cycle sites for peroxymonosulfate activation: A syn

Materials Science in Semiconductor Processing

9

Jan

2026

Fabrication of laser-assisted hierarchical cooperative composite microstructured ionic pressure sensors

Materials Science in Semiconductor Processing

9

Jan

2026

Editorial Board

Materials Science in Semiconductor Processing

9

Jan

2026

PdPtMnCoNi high entropy alloy decorated Nb2O5 microspheres for rapid-response and high-selectivity hydrogen sensing

Materials Science in Semiconductor Processing

9

Jan

2026

Metal-free peroxymonosulfate activation for phenol degradation using selenium–nitrogen co-doped porous carbon nanosheets

Materials Science in Semiconductor Processing

9

Jan

2026

Development of self-powered PVDF based MEMS sensors for sound pressure level measurements

Materials Science in Semiconductor Processing

9

Jan

2026

The effect of hydrogen annealing on the electrical properties of β-Ga2O3/4H-SiC MOSFETs grown by liquid-injection MOCVD

Materials Science in Semiconductor Processing

9

Jan

2026

Tuning phase purity, magnetic softness, and microwave absorption in Co0.75Ni0.25Ti0.975Y0.025O3 via controlled milling and sintering

Materials Science in Semiconductor Processing

9

Jan

2026

Solution blow spun porous cobalt oxide nanofibers via cryogenic bath as oxygen evolution catalysts

Materials Science in Semiconductor Processing

9

Jan

2026

First-principles study of lead-free halide double perovskite Cs2B'AgX6 (B'=Ir, Rh, X = Cl, Br, and I) as potential material in optoelectronic devices

Materials Science in Semiconductor Processing

9

Jan

2026

Triphasic BiFeO3–BaTiO3–CoFe2O4 nanocomposite architectures elucidating efficient magnetoelectric coupling and low–leakage non–volatile memory storage

Materials Science in Semiconductor Processing

9

Jan

2026

Giant ferroelastic stress modulation in AlGaN/GaN heterostructure and its transport mechanism

Materials Science in Semiconductor Processing

9

Jan

2026

A review of out-of-plane structural designs and performance enhancement strategies for MEMS Z-axis capacitive accelerometers

Materials Science in Semiconductor Processing

9

Jan

2026

2 kV normally-off recessed p-NiO gate GaN-based HEMTs fabricated using “buffer-free” AlGaN/GaN heterostructures on SiC substrates

Materials Science in Semiconductor Processing

9

Jan

2026

Resistive switching characteristics of a Bi-2212/NSTO heterostructure

Materials Science in Semiconductor Processing

9

Jan

2026

DV/dt-Induced degradation and failure mechanisms in 1200 V SiC MOSFETs under dynamic reverse bias stress

Materials Science in Semiconductor Processing

9

Jan

2026

Remodeling the immunosuppressive microenvironment of KARS-LKB1 co-mutant non-small cell lung cancer via targeted PGAM5 siRNA delivery for enhanced imm

Materials Today

9

Jan

2026

Measurement of electron–phonon coupling constant under hydrostatic pressure

Materials Today

9

Jan

2026

Strategic defect engineering in ceria interlayer for high-performing solid oxide electrochemical cells

Materials Today

9

Jan

2026

Heteropolyanion regulation activating decoupled ion transition for Na superionic conductors

Materials Today

9

Jan

2026

Expression of concern: Experimental and computational advancement of cathode materials for futuristic Sodium Ion Batteries

Materials Today

9

Jan

2026

Advancing analysis of differential scanning calorimetry data – Converging DSC and AI Gold Open Access

Materials Today

9

Jan

2026

Stability enhancement of perovskite solar cells enabled by hindered amine photostabilizers

Materials Today

9

Jan

2026

Phospholipids tailor mRNA lipid nanoparticle delivery efficacy and immunogenicity

Materials Today

9

Jan

2026

Recent advancements in perovskite thin film technology: From solar cells to optoelectronic devices

Materials Today

9

Jan

2026

Large-scale diffusion bonding of aluminium alloy without interlayers: Mechanical performance and interface quality

Science and Technology of Welding and Joining

9

Jan

2026

Enhancing mechanical properties of additively manufactured AlSi10Mg joints via friction stir welding with Cu interlayer and post-weld heat treatment

Science and Technology of Welding and Joining

9

Jan

2026

Defect engineering in nickel via electrodeposition following low temperature annealing

Scripta Materialia

9

Jan

2026

Retarded relaxation of grain boundaries’ non-equilibrium state in medium-entropy CoFeNi alloy probed by radiotracer diffusion Gold Open Access

Scripta Materialia

9

Jan

2026

Anisotropic phase transformation of Cu6Sn5 driven by electromigration in lead-free solder joints

Scripta Materialia

9

Jan

2026

Microstructural and mechanical response of cold-sprayed copper subjected to annealing

Scripta Materialia

9

Jan

2026

Boron-pnictogen donor-acceptor bonding as a perovskite design principle: DFT case study of quasi 0D A(BX3)2 (A=BeBH3, MgBH3; B=Sb, Bi; X=I)

Scripta Materialia

9

Jan

2026

Elastic properties of Ni50Mn27Ga22Fe1 10M martensite with incommensurate lattice modulation Gold Open Access

Acta Materialia

9

Jan

2026

Effects of twinning configurations on the mechanical performance of small-scale FCC metallic materials Gold Open Access

Acta Materialia

9

Jan

2026

Quantifying changes to solute segregation behaviour at interfaces in additively manufactured Ti-6Al-4V Gold Open Access

Acta Materialia

9

Jan

2026

Unraveling the composition-dependent CMAS corrosion resistance in A6B2O17 (A = Hf, Zr; B = Ta, Nb) ceramics: an experimental and first-principles stud

Acta Materialia

9

Jan

2026

Formation of four-membered rings in metallic glasses with minor additions

Acta Materialia

9

Jan

2026

Understanding the chlorine adsorption mechanism on carbon surfaces for Li-Cl battery cathodes

Acta Materialia

9

Jan

2026

High temperature zirconium alloys Zr-Al-Sn-(Si,Cr,V) by near- α ti Gold Open Access

Acta Materialia

9

Jan

2026

Topological descriptors for disordered networks enable property prediction of multicomponent oxide glasses Gold Open Access

Acta Materialia

9

Jan

2026

Strengthening and deformation mechanisms in CoCrFeMnNi-based medium- and high-entropy alloys at room and cryogenic temperatures

Acta Materialia

9

Jan

2026

Sequential Bayesian Inference of the GTN damage model using multimodal experimental data

Acta Materialia

9

Jan

2026

Nanoscale interfacial melting enables bonding during high velocity microparticle impacts

Acta Materialia

9

Jan

2026

Direct observation of nanoscale pinning centers in Ce(Co0.8Cu0.2)5.4 permanent magnets Gold Open Access

Acta Materialia

9

Jan

2026

Precipitation and phase evolution in a Cu-modified near-α titanium alloy designed for additive manufacturing Gold Open Access

Acta Materialia

9

Jan

2026

Quantitative study of precipitation strengthening effects of T1 phase in Al–Cu–Li–Mg–Ag alloy: Role of nonuniform spatial distribution

Acta Materialia

9

Jan

2026

Composition-Driven Nanotwin Engineering in Sputtered Ni-Fe and Ni-Cr Films: Linking Fault Energetics to Twin Thickness

Acta Materialia

9

Jan

2026

Corrigendum to 'Behavior of Fe-based alloys in a liquid lead-bismuth environment under simultaneous proton irradiation and corrosion'

Acta Materialia

9

Jan

2026

Dislocation transmission across tilt low-angle grain boundaries in BCC Fe: The role of elastic interactions

Acta Materialia

9

Jan

2026

The behavior of point defects and their impact on the formation of helium bubbles in refractory high-entropy alloys Gold Open Access

Acta Materialia

9

Jan

2026

Mechano-Electrochemical Fabrication of Self-Supported Ag Electrode with Ni Surface Single Atom for Hydrogen Production

Acta Materialia

9

Jan

2026

Investigation on structure design method of recycled asphalt pavement based on fatigue life equivalence

Materials and Structures

9

Jan

2026

Interfacial enhancement mechanisms in epoxy resin-modified calcium sulfoaluminate cement grouts: an integrated experimental and molecular dynamics stu

Materials and Structures

9

Jan

2026

Experimental buckling performance of timber columns with mortises under axial compression

Materials and Structures

9

Jan

2026

Study the segregation of fresh self-compacting concrete via coupling smoothed particle hydrodynamics and discrete element method

Materials and Structures

9

Jan

2026

From durability to circularity: ensuring service life and enabling reuse of concrete in circular construction Gold Open Access

Materials and Structures

9

Jan

2026

Multi-scale characterization of aging-induced evolution in physicochemical properties and adhesion behavior at asphalt-aggregate interfaces

Materials and Structures

9

Jan

2026

Comprehensive evaluation of microparticle-modified cement mortars: microstructural analysis, thermal fatigue, and mix-field radiation shielding

Materials and Structures

9

Jan

2026

Design and modification of engineered cement composite materials for regenerated fine aggregate preparation based on response surface methodology

Materials and Structures

9

Jan

2026

Analytical prediction and experimental validation of wet shotcrete pumping using various rheological models

Materials and Structures

9

Jan

2026

Bridging EDLC and pseudocapacitive mechanisms through materials design: recent advances in supercapacitor electrodes

Current Opinion in Solid State & Materials Science

9

Jan

2026

Characterising the variability of multi-supplier material extrusion (MEX) parts: an empirical study

Rapid Prototyping Journal

9

Jan

2026

One-step 3D printing of polyurethane structures with tailored intrinsic porosity for wound dressing applications using immersion precipitation 3D prin Gold Open Access

Rapid Prototyping Journal

9

Jan

2026

Real-time visual detection of printhead status in inkjet 3D printing using multifeature fusion and CNNs

Rapid Prototyping Journal

9

Jan

2026

Optimization of mechanical properties of acrylonitrile styrene acrylate (ASA) in FDM via TOPSIS-simulated annealing hybrid approach

Rapid Prototyping Journal

9

Jan

2026

Evaluating the effect of varying infill density and graphene reinforcement on water absorption properties of PETG composites fabricated via fused depo

Rapid Prototyping Journal

9

Jan

2026

Study on preparation and properties of wood-CO-PES/tourmaline composites (WPTC) by selective laser sintering (SLS)

Rapid Prototyping Journal

9

Jan

2026

Assessment of the carbon reduction potential of the hybrid deposition and micro-rolling (HDMR) for aviation forgings based on industrial metabolism

Rapid Prototyping Journal

9

Jan

2026

A Novel SiO2@CLDH Core-Shell Nanocomposite Strategy for Enhanced Early Strength and Chloride Resistance in High-Volume Slag Cem

Journal of Advanced Concrete Technology

9

Jan

2026

Effect of Crystal Orientation on the Initial Stage of Pore Formation in Ant Nest Corrosion

Materials Transactions

9

Jan

2026

Effects of Uniaxial Applied Pressures on Spark Plasma Sintering Behaviors for 86FeB-10Ni-4Al Hard Materials

Materials Transactions

9

Jan

2026

Preparation of SPS-ed Al2O3-TiC-Ti3SiC2 Composites Using E

Materials Transactions

9

Jan

2026

Tissue stress measurements with Bayesian inversion stress microscopy

European Physical Journal E

9

Jan

2026

Chiral particles in Taylor–Couette turbulence

European Physical Journal E

8

Jan

2026

A third-gradient 1D continuum obtained via asymptotic expansion from a micro-structure obtained constraining a sequence of modified Hart’s antiparalle

Mathematics and Mechanics of Solids

8

Jan

2026

Correction: Mechanical Properties and Biocompatibility of Ti58−x–Zr40–Nbx–Al2 Medium Entropy Alloy for Osteogenic Applications Gold Open Access

Metallurgical and Materials Transactions A-Physical Metallurgy and Mat

8

Jan

2026

Atomic-Resolution EDS Characterization of Ordering in a β–Cu–Zn–Al Alloy Gold Open Access

Metallurgical and Materials Transactions A-Physical Metallurgy and Mat

8

Jan

2026

Effect of Heusler Phase Precipitation on the Transformation Behaviors of a NiTiHf-Based Shape Memory Alloy Gold Open Access

Metallurgical and Materials Transactions A-Physical Metallurgy and Mat

8

Jan

2026

Correlating Part Geometry to Microstructures in Electron Powder Bed Fusion Additive Manufacturing of Alloy 718

Metallurgical and Materials Transactions A-Physical Metallurgy and Mat

8

Jan

2026

Challenging the Limit of Strengthening by γ/γ′ Lattice Misfit on the High Temperature Creep Properties of Ni-Base Single Crystal Superalloy Gold Open Access

Metallurgical and Materials Transactions A-Physical Metallurgy and Mat

8

Jan

2026

Improvement of Mechanical Properties in a CoNi-Based Superalloy Fabricated by Selective Laser Melting Through Optimized Heat Treatment

Metallurgical and Materials Transactions A-Physical Metallurgy and Mat

8

Jan

2026

Investigation of the As-Cast Microstructure, Stability, Wear and Corrosion Resistance of Alloy 625 + WC Nanocomposites Processed Through Suction Casti Gold Open Access

Metallurgical and Materials Transactions A-Physical Metallurgy and Mat

8

Jan

2026

Characterization of Microstructure and Flow Behavior of a Hot-Deformed Ni-Based Superalloy: Effect of Primary Heat Treatment

Metallurgical and Materials Transactions A-Physical Metallurgy and Mat

8

Jan

2026

Effect of Reaction Temperature on Carbothermal Reduction Behavior of P-Bearing Steelmaking Slag

Metallurgical and Materials Transactions B-Process Metallurgy and Mate

8

Jan

2026

Effect of Segmented-Roll Electromagnetic Stirring on Solidification Behavior and Central Macrosegregation in Continuously Cast Ultra-Thick Slabs

Metallurgical and Materials Transactions B-Process Metallurgy and Mate

8

Jan

2026

Reaction Pathway of the CaO- and CaCl2-Assisted Aluminothermic Reduction of TiO2 for the Precise Fabrication of Ti2O

Metallurgical and Materials Transactions B-Process Metallurgy and Mate

8

Jan

2026

Effect of Mg and S Content on Inclusion Characteristics in 304 Stainless Steel During Solidification

Metallurgical and Materials Transactions B-Process Metallurgy and Mate

8

Jan

2026

A Non-uniform Degradation Model of Metallurgical Coke Used in Blast Furnace

Metallurgical and Materials Transactions B-Process Metallurgy and Mate

8

Jan

2026

Mechanical Properties and Compression Behavior of Aluminum Oxide Films on Aluminum Melt Surfaces: A Molecular Dynamics Study

Metallurgical and Materials Transactions B-Process Metallurgy and Mate

8

Jan

2026

Feature Extraction and Rapid Prediction of Multiphase Flow Field in a Copper Side-Blown Smelting Furnace Based on CFD Simulations

Metallurgical and Materials Transactions B-Process Metallurgy and Mate

8

Jan

2026

Influence of metal ions on the oxidation resistance of polypropylene geotextiles

Geosynthetics International

8

Jan

2026

A comprehensive review of nano-enhanced phase change materials for electric vehicle and power electronics thermal management Gold Open Access

Materials Technology

8

Jan

2026

Comparison on Module Performance and Degradation Robustness of Two‐, Three‐, and Four‐Terminal Perovskite Silicon Configurations Under Realistic Opera Gold Open Access

Progress in Photovoltaics

8

Jan

2026

Performance Enhancement of Cellulose Acetate Composites by Using Bio-based Additives: Lignin, Acetone-Dissolved Lignin, Cellulose, and Nanocellulose

Journal of Materials Engineering and Performance

8

Jan

2026

Experimental Study on Tensile Mechanical Properties of Basalt Fiber-Aluminum Laminates under Various Temperature Environments

Journal of Materials Engineering and Performance

8

Jan

2026

Investigation of the Effects of Silicon Carbide Used as an Aggregate Replacement on the Properties of Cement Mortar

Journal of Materials Engineering and Performance

8

Jan

2026

The Structural Stability of Directionally Solidified CM247LC Superalloy Exposed to High and Low Temperature Aging

Journal of Materials Engineering and Performance

8

Jan

2026

The Influence of Hydrogen Diffusion on the Electrical Properties of 316L Stainless Steel at the Crack Tip

Journal of Materials Engineering and Performance

8

Jan

2026

The Effect of Residual Stress on the Fatigue Crack Propagation of 18CrNiMo7-6 Alloy Steel under Different Stress Ratios

Journal of Materials Engineering and Performance

8

Jan

2026

Modeling and Simulation of Crack Evolution in ZnS Fixed Abrasive Lapping Using Discrete Element Method

Journal of Materials Engineering and Performance

8

Jan

2026

Effect of Powder Feeding Rate on the Microstructure and Mechanical Properties of TiC-Reinforced Titanium Matrix Composites during Wire-Powder Hybrid A

Journal of Materials Engineering and Performance

8

Jan

2026

Hot Compression Behavior of Mg-10Gd-2Y-1Zn-0.5Zr Alloy and Abnormal Poor Formability at High Temperature

Journal of Materials Engineering and Performance

8

Jan

2026

Microstructure, Mechanical Properties, and Tribological Properties of Fe45Mn35Co10Cr10 High-Entropy Alloy Reinforced Cu11.85Al3.2Mn0.1Ti Shape Memory

Journal of Materials Engineering and Performance

8

Jan

2026

Preparation and Tribological Performance Analysis of Calcium Borate/Graphene Lubricant Additives

Journal of Materials Engineering and Performance

8

Jan

2026

Thermal deformation behavior and microstructure evolution of a novel Ti2ZrTa0.75 refractory alloy

Journal of Materials Engineering and Performance

8

Jan

2026

A Category Based Multifaceted Jaya Optimization Methodology: Optimizing Surface Quality in EDM Drilling of MoSi2-SiC Composite with Morphological Stud

Journal of Materials Engineering and Performance

8

Jan

2026

Microstructure Regulation and Tribological Response Mechanism of β-Si3N4-Modified 304 Stainless-Steel Coatings

Journal of Materials Engineering and Performance

8

Jan

2026

(La0.2Sm0.2Gd0.2Y0.2Yb0.2)3Nb0.5Ta0.5O7: Novel High-Entropy Oxide for Thermal Barrier Coatings

Journal of Materials Engineering and Performance

8

Jan

2026

An Fe-Based Medium-Entropy Alloy Achieved by Nb and Ta Alloying

Journal of Materials Engineering and Performance

8

Jan

2026

High-Temperature In Situ Oxidation Kinetics of Haynes-230 Alloy Investigated by Electrochemical Impedance Spectroscopy

Journal of Materials Engineering and Performance

8

Jan

2026

Investigation of Influence of Process Parameters on the Metallurgical and Fatigue Properties of Friction Stir Welded Al-Mg-Cr Alloy Using Response Sur

Journal of Materials Engineering and Performance

8

Jan

2026

Coprecipitation and Properties of Conversion Nano-layers Formed on Steel Plates during Iron Phosphating with Molybdate and Magnesium Nitrate Additives Gold Open Access

Journal of Materials Engineering and Performance

8

Jan

2026

Enhancing Mechanical Properties of a Medium-Si Low-Alloy Steel via Quenching and Partitioning Treatment

Journal of Materials Engineering and Performance

8

Jan

2026

The Influence of Adding Rare Earth Element Y on the Mechanical Properties of Ti-0.3Mo-0.8Ni Titanium Alloy

Journal of Materials Engineering and Performance

8

Jan

2026

Impact of Heat Treatment on Hardness in Laser-Powder Bed Fusion (L-PBF) 17-4 PH Stainless Steel

Journal of Materials Engineering and Performance

8

Jan

2026

Effect of Two-Dimensional Ultrasonic Vibration-Assisted Incremental Forming on Surface Integrity and Mechanical Properties of 5052 Aluminum Alloy

Journal of Materials Engineering and Performance

8

Jan

2026

Microstructure and Tribological Properties of Nitrogen-Doped Diamond Coating on Cemented Carbide Rods

Journal of Materials Engineering and Performance

8

Jan

2026

Friction Reduction and Wear Resistance of DLC Coatings: Time-Series Analysis, Characterization, and Thermomechanical Simulation

Journal of Materials Engineering and Performance

8

Jan

2026

Enhancing Surface Integrity in GCr15 Steel Form Grinding via Orthogonal–Symmetric Spider Web Bio-inspired Laser-Textured Structures

Journal of Materials Engineering and Performance

8

Jan

2026

Hot-Pressing Process of 7075 Aluminum Alloy: Microstructure, Corrosion and Wear Properties

Journal of Materials Engineering and Performance

8

Jan

2026

Light Weight (TiB/La2O3)/Ti-V-Al Shape Memory Composites with High Strength and Superior Strain Recovery Properties with Aligned Reinforcements

Journal of Materials Engineering and Performance

8

Jan

2026

Characterization of Dynamic Recrystallization and Microstructural Evolution using 3D Workability Map of Homogenized Co12.5Cr12.5Cu12.5Fe12.5Ni37.5Si12

Journal of Materials Engineering and Performance

8

Jan

2026

Optimization of BFRP-Carbon Fiber Anchor Preparation Process Via RSM: Mechanical Property Enhancement

Journal of Materials Engineering and Performance

8

Jan

2026

Effect of Pre-soaking in Sulfide-Containing Solutions on the Corrosion and Cavitation Erosion Performance of Nickel Aluminum Bronze

Journal of Materials Engineering and Performance

8

Jan

2026

Influence of Laser Scanning Speed on Properties of Laser-Clad Wear-Resistant Coatings on Cast Iron

Journal of Materials Engineering and Performance

8

Jan

2026

Correction to: Regulating the Mechanical and Biodegradation Properties of Cold-Drawn Mg Alloy via Recrystallization Annealing

Journal of Materials Engineering and Performance

8

Jan

2026

Research on the Evolution Mechanism of Fatigue Damage in A633D Low-Alloy High-Strength Steel Joints

Journal of Materials Engineering and Performance

8

Jan

2026

Synthesis of Waterborne Polyurethane/Polyacrylate Composite Emulsion Modified with Organofluorine and its Film Forming Performances

Journal of Materials Engineering and Performance

8

Jan

2026

Influence of Stainless Steel Non-homogeneous Microstructure on the Formation Mechanism of Pack-Aluminizing Coatings

Journal of Materials Engineering and Performance

8

Jan

2026

Data-Driven Characterization and Prediction of Surface Properties in Plasma-Nitrided AISI 8620 Steel

Journal of Materials Engineering and Performance

8

Jan

2026

The Tribological Behavior of ZSnSb11Cu6 Babbitt Alloy and ZSnSb12Cu6Cd1 Babbitt Alloy under Oil Lubrication Condition

Journal of Materials Engineering and Performance

8

Jan

2026

Study on Weld Microstructure and Interface of Explosive Composite Titanium/Aluminum Composite Plate Based on Composite Welding

Journal of Materials Engineering and Performance

8

Jan

2026

Influence of Tungsten on Phase Formation and Properties of Fe−22wt.%Cr-25wt.%Ni Austenitic Steel at Elevated Temperatures

Journal of Materials Engineering and Performance

8

Jan

2026

Effect of Cr Concentration on the Structural Properties, Hardness and Oxidation Behavior of Fe-Cr-Ti Ferritic Alloys

Journal of Materials Engineering and Performance

8

Jan

2026

Microstructural and Mechanical Characteristics of Dissimilar Electron Beam Welded Joints of AISI 304L and Monel K500

Journal of Materials Engineering and Performance

8

Jan

2026

Simulating Heat Accumulation in Directed Energy Deposition through Residual Temperature Control: Numerical and Experimental Approaches

Journal of Materials Engineering and Performance

8

Jan

2026

Influence of Low-SiC Content on the Tribological and Electrical Properties of Cu Composites Produced by Spark Plasma Sintering

Journal of Materials Engineering and Performance

8

Jan

2026

Research on the Hot Deformation and Stress Relaxation Behavior of TB8 Alloy Based on the Deep Learning Method

Journal of Materials Engineering and Performance

8

Jan

2026

Probing Electrical Contact Behavior of Laser Shock Peened Copper under Fretting Wear

Journal of Materials Engineering and Performance

8

Jan

2026

Finite Element Analysis of Microstructural Evolution during Dry Machining of Additively Manufactured Ti6Al4V Alloy

Journal of Materials Engineering and Performance

8

Jan

2026

Study on High-Temperature Deformation Behavior and Hot-Processing Drawing of Cr16Mn8NiMoN Metastable Austenitic Stainless Steel

Journal of Materials Engineering and Performance

8

Jan

2026

Effects of Nano-Silica and Nano-metakaolin on the Properties of Cement-Based Mining Hole Sealing Materials and their Applications

Journal of Materials Engineering and Performance

8

Jan

2026

Enhanced Wear Resistance and Hardness of Laser Cladding In Situ Synthesized NbC-Reinforced AlCoCrFeNi Coating

Journal of Materials Engineering and Performance

8

Jan

2026

Dependence of Slurry Erosion and Wear Behaviors on Mechanical Properties and Microstructures in a High-Cr Super Martensitic Stainless Steel

Journal of Materials Engineering and Performance

8

Jan

2026

Mechanical and Microstructure Analysis of Dissimilar Metal Joining by ATIG Welding

Journal of Materials Engineering and Performance

8

Jan

2026

Effect of Cu Additions on Microstructure and Wear Performance of AISI 316L Manufactured by PTA

Journal of Materials Engineering and Performance

8

Jan

2026

Effect of Vacuum Heat Treatments on Microstructure and Mechanical Properties of PM60 Powder Metallurgy High-Speed Steel

Journal of Materials Engineering and Performance

8

Jan

2026

Comparison of Dry Sliding Tribological Behavior of Lean Duplex Stainless Steel and Standard Austenitic Stainless Steel

Journal of Materials Engineering and Performance

8

Jan

2026

Investigation of the Corrosion Resistance of Ti-Reinforced 0.7 wt.% Cr Weathering Steel in an Industrial Atmospheric Environment

Journal of Materials Engineering and Performance

8

Jan

2026

Machine Learning-Based Prediction of Weld Pool Features in Laser-Arc Hybrid Welding of Ultra-High-Strength Wear-Resistant Steels

Journal of Materials Engineering and Performance

8

Jan

2026

Physicochemical and Mechanical Characterization of Cowrie Shells for Bone Regeneration Applications

JOM

8

Jan

2026

Effect of Erbium Addition to A380 Aluminum Alloy on Mechanical and Microstructural Properties

JOM

8

Jan

2026

Surface Damage and Degradation Mechanisms of HVOF-Sprayed Colmonoy-88 and Stellite-6 on SS-316 Under Slurry Erosion

JOM

8

Jan

2026

Electromigration Reliability and Failure Mechanisms in Novel 3D Cu Stagger-via Interconnects for Advanced High-Density Fan-Out Packaging

JOM

8

Jan

2026

A Student’s Guide to TMS2026

JOM

8

Jan

2026

Extracting Excellence: A Review of Extraction 2025

JOM

8

Jan

2026

JOM Technical Topics

JOM

8

Jan

2026

Collaborative-Driven Evaluation of Blast Furnace Stability Based on Big Data and Expert Experience

JOM

8

Jan

2026

Recent Advances and Challenges in Nano Zero-Valent Iron and Its Composites for Arsenic Removal from Wastewater: Synthesis Strategies, Modification App

JOM

8

Jan

2026

A Quick Look at the TMS2026 Proceedings Volumes

JOM

8

Jan

2026

Witch Hazel-Derived ZnO Nanoparticles: Green Synthesis and Exceptional Multifunctionality in Antibiotic Removal, Inflammation Control, Bacterial Inhib

JOM

8

Jan

2026

TMS Meeting Headlines

JOM

8

Jan

2026

Investigation into Achieving a Superior Strength and Corrosion Balance in 7075 Aluminium Alloys via Cyclic RRA-DCT

JOM

8

Jan

2026

Effects of Layer Thickness Ratio on Residual Stress, Microstructure and Mechanical Properties of SiC-ZrB2/SiC-TiCN Laminated Ceramics

JOM

8

Jan

2026

TMS Member News

JOM

8

Jan

2026

Opening Ideas

JOM

8

Jan

2026

TMS Welcomes New Members in September 2025

JOM

8

Jan

2026

Critical Mineral Evolution and Beneficiation Properties of a Novel Gibbsitic Bauxite Residue: A TIMA-Based Characterization

JOM

8

Jan

2026

Looking to the Future of TMS: An Interview with Incoming Executive Director Trudi Dunlap

JOM

8

Jan

2026

A Novel High-Efficiency, Short-Flow Process of Direct Zinc Smelting Using Oxidative Smelting and Subsequent Electrothermal Reduction

JOM

8

Jan

2026

Improvement of the energy conversion efficiency in traveling wave rotary ultrasonic motors by increasing the elastic modulus of the friction layer

Journal of Intelligent Material Systems and Structures

8

Jan

2026

An indicator kriging-based framework for multi-damage localization in ISHM

Journal of Intelligent Material Systems and Structures

8

Jan

2026

Performance of magneto-piezo-elastic cantilever circular array for low-speed efficient wind power generator application

Journal of Intelligent Material Systems and Structures

8

Jan

2026

Analysis of braking performance of a new type of multi-pole bearing bush type magnetorheological brake considering electromagnetic force squeezing

Journal of Intelligent Material Systems and Structures

8

Jan

2026

Creep deformation and failure mechanisms of powder metallurgy processed FeCrAl alloy at 700 °C

Materials Characterization

8

Jan

2026

Strength-ductility synergy in vanadium microalloyed lightweight steel via regulating duplex ratio

Materials Characterization

8

Jan

2026

Work hardening behavior and anisotropy microscopic mechanism of 7050 aluminum alloy at room temperature

Materials Characterization

8

Jan

2026

Additively manufactured M300 maraging steel, in-situ process monitoring, microstructure, and performance evaluation

Materials Characterization

8

Jan

2026

Effects of TiAl addition on microstructure and mechanical properties of laser-directed energy deposited CoCrFeNiMn high-entropy alloy

Materials Characterization

8

Jan

2026

Effect of ultrasonic vibration amplitude on the microstructure, residual stress, and tensile properties of HR-2 austenitic stainless steel

Materials Characterization

8

Jan

2026

Achieving high-performance joints with fine and dispersive borides of high borated stainless steel by friction stir welding

Materials Characterization

8

Jan

2026

The role of yttrium and recrystallization on creep resistance in CuCrZrY alloy

Materials Characterization

8

Jan

2026

Synergistic enhancement of in-situ (ZrB2 + Al2O3) nanoparticles and Y on the microstructure and mechanical properties of A356.2 composites

Materials Characterization

8

Jan

2026

Multiscale analysis of microstructural evolution and damage mechanisms in carbon fiber reinforced AZ91D magnesium matrix composites under thermal cycl

Materials Characterization

8

Jan

2026

Heat treatment-driven stability and morphology control of reverted austenite in additively manufactured martensitic stainless steel Gold Open Access

Materials Characterization

8

Jan

2026

Microstructure and mechanical behavior of laser remelted amorphous Al-Ni-La welds

Materials Characterization

8

Jan

2026

Irradiation-induced refinement of nano-oxides and the role in suppressing swelling in He-implanted ODS reduced-activation ferritic steels

Materials Characterization

8

Jan

2026

Unveiling intrinsic heat treatment effects on heterogeneous microstructure and mechanical property in laser-directed energy deposition of Ni-based sin

Materials Characterization

8

Jan

2026

Microstructure evolution and tensile fracture behavior of AZ91/GWZ831K laminated heterostructured material fabricated via wire arc directed energy dep

Materials Characterization

8

Jan

2026

Quasi-equal strength friction stir welding of Invar alloys towards better service performances

Materials Characterization

8

Jan

2026

Synergistic enhancement of strength-ductility and marine corrosion resistance in high‑phosphorus weathering steels

Materials Characterization

8

Jan

2026

Stacking-fault-mediated precipitation and microstructural evolution in low-RE Mg–Zn–Zr–Nd–Yb/Sm alloys processed by low-strain rotary swaging

Materials Characterization

8

Jan

2026

Potential substitution of superalloys with high-entropy alloys: A study on erosion of Al0.5CrFe1.5NixTi0.2 in comparison with Inconel 625 Gold Open Access

Materials Characterization

8

Jan

2026

Relationship of microstructure and mechanical properties of 2195-T8 aluminum‑lithium alloy TIG welded joint

Materials Characterization

8

Jan

2026

Ultrafine-grained/nanolaminate heterostructure enables exceptionally long Lüders-type stress plateau in the tensile of a high strength medium Mn steel

Materials Characterization

8

Jan

2026

Atomic-scale characterization of intermetallic compounds in the La/Ce-added steel rebars with high corrosion resistance

Materials Characterization

8

Jan

2026

Microstructure and property evolution of PIM-processed Fe-30Cr alloys for SOFC/SOEC interconnectors under simulated operational conditions Gold Open Access

Materials Characterization

8

Jan

2026

Achieving synergistic strength-ductility optimization in SiCₚ/AZ61 composites by a novel continuous squeeze casting-extrusion process

Materials Characterization

8

Jan

2026

Effect of dislocation cell structures on mechanical properties and deformation mechanisms of TWIP steel fabricated by laser powder bed fusion

Materials Characterization

8

Jan

2026

Effect of cold rolling on microstructural stability and abnormal grain growth in friction stir welded 7075 aluminum alloy

Materials and Manufacturing Processes

8

Jan

2026

Response optimization and machining microslit arrays in molybdenum through micro-EDM

Materials and Manufacturing Processes

8

Jan

2026

Influence of insert dimensions on distortion during reverse cladding

Materials and Manufacturing Processes

8

Jan

2026

Geometric error evaluation and improvement in UEDM for deep microholes

Materials and Manufacturing Processes

8

Jan

2026

Electrochemical machining casing mounting flange via a concave arc-shaped tool

Materials and Manufacturing Processes

8

Jan

2026

Process stability and deposition behavior of branch wire coupled arc-DED

Materials and Manufacturing Processes

8

Jan

2026

Laser welding of Li-ion battery electrical contacts exploiting core/ring beam shapes Gold Open Access

Journal of Laser Applications

8

Jan

2026

Front heating–back sensing in photothermal measurement of cross-plane thermal conductivity: Experimental and theoretical insights

Journal of Laser Applications

8

Jan

2026

Synergistic toughening by phase transformation and dislocation activity in (5RE0.2)Ta3O9 (RE = La, Gd, Nd, Dy, Sm, Eu, Ce) high-entropy ceramics

Journal of Materials Science & Technology

8

Jan

2026

Schottky heterojunctions enabling enhanced interfacial polarization for high-performance electromagnetic wave absorption

Journal of Materials Science & Technology

8

Jan

2026

Atomically dispersed bimetallic Pd-Fe clusters for boosting catalytic antibacterial performance with O2

Journal of Materials Science & Technology

8

Jan

2026

Localized corrosion at distinct L12 precipitates in Al–Zr–Sc–Er–Yb alloys

Journal of Materials Science & Technology

8

Jan

2026

Interpretable high-throughput machine learning-based screening of high-thermal-conductivity composites with experimental validation

Journal of Materials Science & Technology

8

Jan

2026

Ultrahigh oxygen sensitivity to the formation of single-phase Bi2Ti2O7 pyrochlore during deep undercooling solidification

Journal of Materials Science & Technology

8

Jan

2026

Unexpected solidification cracking behavior in yttrium-modified Hastelloy-X superalloy fabricated by direct energy deposition

Journal of Materials Science & Technology

8

Jan

2026

Enhancing plasticity in Ti575 alloy through controlled deformation mechanisms activation by solid solution treatment

Journal of Materials Science & Technology

8

Jan

2026

Fabrication and mechanical properties of VPP 3D-printed silicon nitride honeycombs

Journal of Materials Science & Technology

8

Jan

2026

Significantly improving the bending formability of AZ31 Mg alloy by pre-introducing {10

Progress in Natural Science-Materials International

8

Jan

2026

Materials-driven technologies and intelligent control for mineral processing wastewater recovery

Progress in Natural Science-Materials International

8

Jan

2026

Electrolyte With Functionalized Boron Nitride Nanosheets for Dendrite‐Free Lithium Metal Anodes Gold Open Access

Rare Metals

8

Jan

2026

Atomic‐Precision Symmetry Breaking in Bi‐O‐Ti Sites Enables ROS Generation for Bactericidal and Osteosarcoma Therapy Gold Open Access

Rare Metals

8

Jan

2026

Precise Tailoring of the Coordination Environment of Single‐Atom Cu(I) on Trifurcate AlL 3 Supports for Click Gold Open Access

Rare Metals

8

Jan

2026

A Non‐van der Waals Superlattice Breakthrough: Engineered Atomic Layer Assemblies Gold Open Access

Rare Metals

8

Jan

2026

An Ultrasmall Strontium‐Loaded Polydopamine Nanoformulation for Near‐Infrared‐Enhanced Periodontitis Therapy via Photodynamic Gas‐Promoted Antibacteri Gold Open Access

Rare Metals

8

Jan

2026

High‐Brightness Delayed Imaging Realized by Embedding Zinc Gallate Nanocrystals Into Glass Gold Open Access

Rare Metals

8

Jan

2026

Electronegativity‐Driven Frontier Orbital Engineering in B‐Ti Diatomic Synergy Enables Selective Li 2 C Gold Open Access

Rare Metals

8

Jan

2026

Rational Design of Multifunctional Nano–Architected Coatings for Bipolar Plates in Proton Exchange Membrane Fuel Cells Gold Open Access

Rare Metals

8

Jan

2026

Janus Nanofiber‐Architected Moisture‐Enabled Power Generator for Intelligent Sensing and Neuromorphic Application Gold Open Access

Rare Metals

8

Jan

2026

Laser‐Driven Halide Exchange and High‐Resolution Multicolor Patterning of Perovskite Films Gold Open Access

Rare Metals

8

Jan

2026

Electrospun Carbon Nanofiber‐Based Multifunctional Electrocatalysts for Zinc‐Air Batteries and Overall Water Splitting: Fabrication, Progress, and Per Gold Open Access

Rare Metals

8

Jan

2026

Progress in Surface‐Enhanced Raman Scattering‐Based Volatile Organic Compounds Detection: Materials, Application, and Prospects Gold Open Access

Rare Metals

8

Jan

2026

Fermi Surface Structure Revealed by Quantum Oscillations in Half‐Heusler Semimetal LuAuSn Gold Open Access

Rare Metals

8

Jan

2026

Systematic Study of Fermi‐Level Pinning at Crystalline Metal/GaN Interfaces: First‐Principles Calculations and Diode Characterization Gold Open Access

Rare Metals

8

Jan

2026

Electronic Modulation of CoNi Nanoparticles by N‐Doped Carbon for Efficient Lignin Hydrogenolysis to Aromatic Monomers Gold Open Access

Rare Metals